audk/IntelFrameworkPkg/Include/Protocol/FormCallbackFramework.h

212 lines
9.2 KiB
C

/** @file
The EFI_FORM_CALLBACK_PROTOCOL is the defined interface for access to custom
NV storage devices as well as communication of user selections in a more
interactive environment. This protocol should be published by hardware
specific drivers which want to export access to custom hardware storage or
publish IFR which has a requirement to call back the original driver.
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name: FormCallbackFramework.h
@par Revision Reference:
This protocol is defined in HII spec 0.92.
**/
#ifndef __FORM_CALLBACK_H__
#define __FORM_CALLBACK_H__
#include <PiDxe.h>
#include <Protocol/HiiFramework.h>
#include <Protocol/FormBrowserFramework.h>
#define EFI_FORM_CALLBACK_PROTOCOL_GUID \
{ \
0xf3e4543d, 0xcf35, 0x6cef, {0x35, 0xc4, 0x4f, 0xe6, 0x34, 0x4d, 0xfc, 0x54 } \
}
//
// Forward reference for pure ANSI compatability
//
typedef struct _EFI_FORM_CALLBACK_PROTOCOL EFI_FORM_CALLBACK_PROTOCOL;
#define RESET_REQUIRED 1 // Flags setting to signify that the callback operation resulted in an eventual
// reset to be done upon exit of the browser
//
#define EXIT_REQUIRED 2 // Flags setting to signify that after the processing of the callback results - exit the browser
#define SAVE_REQUIRED 4 // Flags setting to signify that after the processing of the callback results - save the NV data
#define NV_CHANGED 8 // Flags setting to signify that after the processing of the callback results - turn the NV flag on
#define NV_NOT_CHANGED 16 // Flags setting to signify that after the processing of the callback results - turn the NV flag off
#pragma pack(1)
typedef struct {
UINT8 OpCode; // Likely a string, numeric, or one-of
UINT8 Length; // Length of the EFI_IFR_DATA_ENTRY packet
UINT16 Flags; // Flags settings to determine what behavior is desired from the browser after the callback
VOID *Data; // The data in the form based on the op-code type - this is not a pointer to the data, the data follows immediately
// If the OpCode is a OneOf or Numeric type - Data is a UINT16 value
// If the OpCode is a String type - Data is a CHAR16[x] type
// If the OpCode is a Checkbox type - Data is a UINT8 value
// If the OpCode is a NV Access type - Data is a EFI_IFR_NV_DATA structure
//
} EFI_IFR_DATA_ENTRY;
typedef struct {
VOID *NvRamMap; // If the flag of the op-code specified retrieval of a copy of the NVRAM map,
// this is a pointer to a buffer copy
//
UINT32 EntryCount; // How many EFI_IFR_DATA_ENTRY entries
//
// EFI_IFR_DATA_ENTRY Data[1]; // The in-line Data entries.
//
} EFI_IFR_DATA_ARRAY;
typedef union {
EFI_IFR_DATA_ARRAY DataArray; // Primarily used by those who call back to their drivers and use HII as a repository
EFI_IFR_PACKET DataPacket; // Primarily used by those which do not use HII as a repository
CHAR16 *String; // If returning an error - fill the string with null-terminated contents
} EFI_HII_CALLBACK_PACKET;
typedef struct {
EFI_IFR_OP_HEADER Header;
UINT16 QuestionId; // Offset into the map
UINT8 StorageWidth; // Width of the value
//
// CHAR8 Data[1]; // The Data itself
//
} EFI_IFR_NV_DATA;
#pragma pack()
//
// The following types are currently defined:
//
/**
Returns the value of a variable.
@param This A pointer to the EFI_FORM_CALLBACK_PROTOCOL instance.
@param VariableName A NULL-terminated Unicode string that is the
name of the vendor's variable.
@param VendorGuid A unique identifier for the vendor.
@param Attributes If not NULL, a pointer to the memory location to
return the attribute's bit-mask for the variable.
@param DataSize The size in bytes of the Buffer. A size of zero causes
the variable to be deleted.
@param Buffer The buffer to return the contents of the variable.
@retval EFI_SUCCESS The function completed successfully.
@retval EFI_NOT_FOUND The variable was not found.
@retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result.
DataSize has been updated with the size needed to complete the request.
@retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
@retval EFI_DEVICE_ERROR The variable could not be saved due to a hardware failure.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_NV_READ) (
IN EFI_FORM_CALLBACK_PROTOCOL *This,
IN CHAR16 *VariableName,
IN EFI_GUID *VendorGuid,
OUT UINT32 *Attributes OPTIONAL,
IN OUT UINTN *DataSize,
OUT VOID *Buffer
);
/**
Sets the value of a variable.
@param This A pointer to the EFI_FORM_CALLBACK_PROTOCOL instance.
@param VariableName A NULL-terminated Unicode string that is the
name of the vendor's variable. Each VariableName is unique for each VendorGuid.
@param VendorGuid A unique identifier for the vendor.
@param Attributes Attributes bit-mask to set for the variable.
@param DataSize The size in bytes of the Buffer. A size of zero causes
the variable to be deleted.
@param Buffer The buffer containing the contents of the variable.
@param ResetRequired Returns a value from the driver that abstracts
this information and will enable a system to know if a system reset
is required to achieve the configuration changes being enabled through
this function.
@retval EFI_SUCCESS The firmware has successfully stored the variable and
its data as defined by the Attributes.
@retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold
the variable and its data.
@retval EFI_INVALID_PARAMETER An invalid combination of Attributes bits
was supplied, or the DataSize exceeds the maximum allowed.
@retval EFI_DEVICE_ERROR The variable could not be saved due to a hardware failure.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_NV_WRITE) (
IN EFI_FORM_CALLBACK_PROTOCOL *This,
IN CHAR16 *VariableName,
IN EFI_GUID *VendorGuid,
IN UINT32 Attributes,
IN UINTN DataSize,
IN VOID *Buffer,
OUT BOOLEAN *ResetRequired
);
/**
This function is called to provide results data to the driver.
@param This A pointer to the EFI_FORM_CALLBACK_PROTOCOL instance.
@param KeyValue A unique value which is sent to the original exporting
driver so that it can identify the type of data to expect. The format of
the data tends to vary based on the opcode that generated the callback.
@param Data A pointer to the data being sent to the original exporting driver.
@param Packet A pointer to a packet of information which a driver passes
back to the browser.
@return Status Code
**/
typedef
EFI_STATUS
(EFIAPI *EFI_FORM_CALLBACK) (
IN EFI_FORM_CALLBACK_PROTOCOL *This,
IN UINT16 KeyValue,
IN EFI_IFR_DATA_ARRAY *Data,
OUT EFI_HII_CALLBACK_PACKET **Packet
);
/**
@par Protocol Description:
The EFI_FORM_CALLBACK_PROTOCOL is the defined interface for access to
custom NVS devices as well as communication of user selections in a more
interactive environment. This protocol should be published by hardware-specific
drivers that want to export access to custom hardware storage or publish IFR
that has a requirement to call back the original driver.
@param NvRead
The read operation to access the NV data serviced by a hardware-specific driver.
@param NvWrite
The write operation to access the NV data serviced by a hardware-specific driver.
@param Callback
The function that is called from the configuration browser to communicate key value pairs.
**/
struct _EFI_FORM_CALLBACK_PROTOCOL {
EFI_NV_READ NvRead;
EFI_NV_WRITE NvWrite;
EFI_FORM_CALLBACK Callback;
};
extern EFI_GUID gEfiFormCallbackProtocolGuid;
#endif