audk/QuarkPlatformPkg/Platform/SpiFvbServices/SpiFlashDevice.h

188 lines
6.0 KiB
C

/** @file
Copyright (c) 2013-2015 Intel Corporation.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _SPI_FLASH_DEVICE_H_
#define _SPI_FLASH_DEVICE_H_
#include <PiDxe.h>
#include <Protocol/Spi.h>
#include <Protocol/FirmwareVolumeBlock.h>
//
// Supported SPI Flash Devices
//
typedef enum {
EnumSpiFlash25L3205D, // Macronix 32Mbit part
EnumSpiFlashW25Q32, // Winbond 32Mbit part
EnumSpiFlashW25X32, // Winbond 32Mbit part
EnumSpiFlashAT25DF321, // Atmel 32Mbit part
EnumSpiFlashQH25F320, // Intel 32Mbit part
EnumSpiFlash25VF064C, // SST 64Mbit part
EnumSpiFlashM25PX64, // NUMONYX 64Mbit part
EnumSpiFlashAT25DF641, // Atmel 64Mbit part
EnumSpiFlashS25FL064K, // Spansion 64Mbit part
EnumSpiFlash25L6405D, // Macronix 64Mbit part
EnumSpiFlashW25Q64, // Winbond 64Mbit part
EnumSpiFlashW25X64, // Winbond 64Mbit part
EnumSpiFlashQH25F640, // Intel 64Mbit part
EnumSpiFlashMax
} SPI_FLASH_TYPES_SUPPORTED;
//
// Flash Device commands
//
// If a supported device uses a command different from the list below, a device specific command
// will be defined just below it's JEDEC id section.
//
#define SPI_COMMAND_WRITE 0x02
#define SPI_COMMAND_WRITE_AAI 0xAD
#define SPI_COMMAND_READ 0x03
#define SPI_COMMAND_ERASE 0x20
#define SPI_COMMAND_WRITE_DISABLE 0x04
#define SPI_COMMAND_READ_S 0x05
#define SPI_COMMAND_WRITE_ENABLE 0x06
#define SPI_COMMAND_READ_ID 0xAB
#define SPI_COMMAND_JEDEC_ID 0x9F
#define SPI_COMMAND_WRITE_S_EN 0x50
#define SPI_COMMAND_WRITE_S 0x01
#define SPI_COMMAND_CHIP_ERASE 0xC7
#define SPI_COMMAND_BLOCK_ERASE 0xD8
//
// Flash JEDEC device ids
//
// SST 8Mbit part
//
#define SPI_SST25VF080B_ID1 0xBF
#define SPI_SST25VF080B_ID2 0x25
#define SPI_SST25VF080B_ID3 0x8E
//
// SST 16Mbit part
//
#define SPI_SST25VF016B_ID1 0xBF
#define SPI_SST25VF016B_ID2 0x25
#define SPI_SST25V016BF_ID3 0x41
//
// Macronix 32Mbit part
//
// MX25 part does not support WRITE_AAI comand (0xAD)
//
#define SPI_MX25L3205_ID1 0xC2
#define SPI_MX25L3205_ID2 0x20
#define SPI_MX25L3205_ID3 0x16
//
// Intel 32Mbit part bottom boot
//
#define SPI_QH25F320_ID1 0x89
#define SPI_QH25F320_ID2 0x89
#define SPI_QH25F320_ID3 0x12 // 32Mbit bottom boot
//
// Intel 64Mbit part bottom boot
//
#define SPI_QH25F640_ID1 0x89
#define SPI_QH25F640_ID2 0x89
#define SPI_QH25F640_ID3 0x13 // 64Mbit bottom boot
//
// QH part does not support command 0x20 for erase; only 0xD8 (sector erase)
// QH part has 0x40 command for erase of parameter block (8 x 8K blocks at bottom of part)
// 0x40 command ignored if address outside of parameter block range
//
#define SPI_QH25F320_COMMAND_PBLOCK_ERASE 0x40
//
// Winbond 32Mbit part
//
#define SPI_W25X32_ID1 0xEF
#define SPI_W25X32_ID2 0x30 // Memory Type
#define SPI_W25X32_ID3 0x16 // Capacity
#define SF_DEVICE_ID1_W25Q32 0x16
//
// Winbond 64Mbit part
//
#define SPI_W25X64_ID1 0xEF
#define SPI_W25X64_ID2 0x30 // Memory Type
#define SPI_W25X64_ID3 0x17 // Capacity
#define SF_DEVICE_ID0_W25QXX 0x40
#define SF_DEVICE_ID1_W25Q64 0x17
//
// Winbond 128Mbit part
//
#define SF_DEVICE_ID0_W25Q128 0x40
#define SF_DEVICE_ID1_W25Q128 0x18
//
// Atmel 32Mbit part
//
#define SPI_AT26DF321_ID1 0x1F
#define SPI_AT26DF321_ID2 0x47 // [7:5]=Family, [4:0]=Density
#define SPI_AT26DF321_ID3 0x00
#define SF_VENDOR_ID_ATMEL 0x1F
#define SF_DEVICE_ID0_AT25DF641 0x48
#define SF_DEVICE_ID1_AT25DF641 0x00
//
// SST 8Mbit part
//
#define SPI_SST25VF080B_ID1 0xBF
#define SPI_SST25VF080B_ID2 0x25
#define SPI_SST25VF080B_ID3 0x8E
#define SF_DEVICE_ID0_25VF064C 0x25
#define SF_DEVICE_ID1_25VF064C 0x4B
//
// SST 16Mbit part
//
#define SPI_SST25VF016B_ID1 0xBF
#define SPI_SST25VF016B_ID2 0x25
#define SPI_SST25V016BF_ID3 0x41
//
// Winbond 32Mbit part
//
#define SPI_W25X32_ID1 0xEF
#define SPI_W25X32_ID2 0x30 // Memory Type
#define SPI_W25X32_ID3 0x16 // Capacity
#define SF_VENDOR_ID_MX 0xC2
#define SF_DEVICE_ID0_25L6405D 0x20
#define SF_DEVICE_ID1_25L6405D 0x17
#define SF_VENDOR_ID_NUMONYX 0x20
#define SF_DEVICE_ID0_M25PX64 0x71
#define SF_DEVICE_ID1_M25PX64 0x17
//
// Spansion 64Mbit part
//
#define SF_VENDOR_ID_SPANSION 0xEF
#define SF_DEVICE_ID0_S25FL064K 0x40
#define SF_DEVICE_ID1_S25FL064K 0x00
//
// index for prefix opcodes
//
#define SPI_WREN_INDEX 0 // Prefix Opcode 0: SPI_COMMAND_WRITE_ENABLE
#define SPI_EWSR_INDEX 1 // Prefix Opcode 1: SPI_COMMAND_WRITE_S_EN
#define BIOS_CTRL 0xDC
#define PFAB_CARD_DEVICE_ID 0x5150
#define PFAB_CARD_VENDOR_ID 0x8086
#define PFAB_CARD_SETUP_REGISTER 0x40
#define PFAB_CARD_SETUP_BYTE 0x0d
#endif