tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/OptionRomPkg/Bus/Usb/FtdiUsbSerialDxe/FtdiUsbSerialDriver.h

596 lines
23 KiB
C
Raw Blame History

/** @file
Header file for USB Serial Driver's Data Structures.
Copyright (c) 2004 - 2013, Intel Corporation. All rights reserved.
Portions Copyright 2012 Ashley DeSimone
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD
License which accompanies this distribution. The full text of the license may
be found at http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _FTDI_USB_SERIAL_DRIVER_H_
#define _FTDI_USB_SERIAL_DRIVER_H_
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Library/DevicePathLib.h>
#include <Protocol/DevicePath.h>
#include <Protocol/UsbIo.h>
#include <Protocol/SerialIo.h>
//
// US English LangID
//
#define USB_US_LANG_ID 0x0409
//
// Supported Vendor Ids
//
#define VID_FTDI 0x0403
//
// Supported product ids
//
#define DID_FTDI_FT232 0x6001
//
// FTDI Commands
//
#define FTDI_COMMAND_RESET_PORT 0
#define FTDI_COMMAND_MODEM_CTRL 1
#define FTDI_COMMAND_SET_FLOW_CTRL 2
#define FTDI_COMMAND_SET_BAUDRATE 3
#define FTDI_COMMAND_SET_DATA 4
#define FTDI_COMMAND_GET_MODEM_STATUS 5
#define FTDI_COMMAND_SET_EVENT_CHAR 6
#define FTDI_COMMAND_SET_ERROR_CHAR 7
#define FTDI_COMMAND_SET_LATENCY_TIMER 9
#define FTDI_COMMAND_GET_LATENCY_TIMER 10
//
// FTDI_PORT_IDENTIFIER
// Used in the usb control transfers that issue FTDI commands as the index value.
//
#define FTDI_PORT_IDENTIFIER 0x1 // For FTDI USB serial adapter the port
// identifier is always 1.
//
// RESET_PORT
//
#define RESET_PORT_RESET 0x0 // Purges RX and TX, clears DTR and RTS sets
// flow control to none, disables event
// trigger, sets the event char to 0x0d and
// does nothing to baudrate or data settings
#define RESET_PORT_PURGE_RX 0x1
#define RESET_PORT_PURGE_TX 0x2
//
// SET_FLOW_CONTROL
//
#define NO_FLOW_CTRL 0x0
#define XON_XOFF_CTRL 0x4
//
// SET_BAUD_RATE
// To set baud rate, one must calculate an encoding of the baud rate from
// UINT32 to UINT16.See EncodeBaudRateForFtdi() for details
//
#define FTDI_UART_FREQUENCY 3000000
#define FTDI_MIN_DIVISOR 0x20
#define FTDI_MAX_DIVISOR 0x3FFF8
//
// Special case baudrate values
// 300,000 and 200,000 are special cases for calculating the encoded baudrate
//
#define FTDI_SPECIAL_CASE_300_MIN (3000000 * 100) / 103 // minimum adjusted
// value for 300,000
#define FTDI_SPECIAL_CASE_300_MAX (3000000 * 100) / 97 // maximum adjusted
// value for 300,000
#define FTDI_SPECIAL_CASE_200_MIN (2000000 * 100) / 103 // minimum adjusted
// value for 200,000
#define FTDI_SPECIAL_CASE_200_MAX (2000000 * 100) / 97 // maximum adjusted
// value for 200,000
//
// Min and max frequency values that the FTDI chip can attain
//.all generated frequencies must be between these values
//
#define FTDI_MIN_FREQUENCY 46601941 // (3MHz * 1600) / 103 = 46601941
#define FTDI_MAX_FREQUENCY 49484536 // (3MHz * 1600) / 97 = 49484536
//
// SET_DATA_BITS
//
#define SET_DATA_BITS(n) (n)
//
// SET_PARITY
//
#define SET_PARITY_NONE 0x0
#define SET_PARITY_ODD BIT8 // (0x1 << 8)
#define SET_PARITY_EVEN BIT9 // (0x2 << 8)
#define SET_PARITY_MARK BIT9 | BIT8 // (0x3 << 8)
#define SET_PARITY_SPACE BIT10 // (0x4 << 8)
//
// SET_STOP_BITS
//
#define SET_STOP_BITS_1 0x0
#define SET_STOP_BITS_15 BIT11 // (0x1 << 11)
#define SET_STOP_BITS_2 BIT12 // (0x2 << 11)
//
// SET_MODEM_CTRL
// SET_DTR_HIGH = (1 | (1 << 8)), SET_DTR_LOW = (0 | (1 << 8)
// SET_RTS_HIGH = (2 | (2 << 8)), SET_RTS_LOW = (0 | (2 << 8)
//
#define SET_DTR_HIGH (BIT8 | BIT0)
#define SET_DTR_LOW (BIT8)
#define SET_RTS_HIGH (BIT9 | BIT1)
#define SET_RTS_LOW (BIT9)
//
// MODEM_STATUS
//
#define CTS_MASK BIT4
#define DSR_MASK BIT5
#define RI_MASK BIT6
#define SD_MASK BIT7
#define MSR_MASK (CTS_MASK | DSR_MASK | RI_MASK | SD_MASK)
//
// Macro used to check for USB transfer errors
//
#define USB_IS_ERROR(Result, Error) (((Result) & (Error)) != 0)
//
// USB request timeouts
//
#define WDR_TIMEOUT 5000 // default urb timeout in ms
#define WDR_SHORT_TIMEOUT 1000 // shorter urb timeout in ms
//
// FTDI timeout
//
#define FTDI_TIMEOUT 16
//
// FTDI FIFO depth
//
#define FTDI_MAX_RECEIVE_FIFO_DEPTH 384
//
// FTDI Endpoint Descriptors
//
#define FTDI_ENDPOINT_ADDRESS_IN 0x81 //the endpoint address for the in enpoint generated by the device
#define FTDI_ENDPOINT_ADDRESS_OUT 0x02 //the endpoint address for the out endpoint generated by the device
//
// Max buffer size for USB transfers
//
#define SW_FIFO_DEPTH 1024
//
// struct to define a usb device as a vendor and product id pair
//
typedef struct {
UINTN VendorId;
UINTN DeviceId;
} USB_DEVICE;
//
//struct to describe the control bits of the device
//true indicates enabled
//false indicates disabled
//
typedef struct {
BOOLEAN HardwareFlowControl;
BOOLEAN DtrState;
BOOLEAN RtsState;
BOOLEAN HardwareLoopBack;
BOOLEAN SoftwareLoopBack;
} CONTROL_BITS;
//
//struct to describe the status bits of the device
//true indicates enabled
//false indicated disabled
//
typedef struct {
BOOLEAN CtsState;
BOOLEAN DsrState;
BOOLEAN RiState;
BOOLEAN SdState;
} STATUS_BITS;
//
// Structure to describe the last attributes of the Usb Serial device
//
typedef struct {
UINT64 BaudRate;
UINT32 ReceiveFifoDepth;
UINT32 Timeout;
EFI_PARITY_TYPE Parity;
UINT8 DataBits;
EFI_STOP_BITS_TYPE StopBits;
} PREVIOUS_ATTRIBUTES;
//
// Structure to describe USB serial device
//
#define USB_SER_DEV_SIGNATURE SIGNATURE_32 ('u', 's', 'b', 's')
typedef struct {
UINTN Signature;
EFI_HANDLE ControllerHandle;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
UART_DEVICE_PATH UartDevicePath;
UART_FLOW_CONTROL_DEVICE_PATH FlowControlDevicePath;
EFI_USB_IO_PROTOCOL *UsbIo;
EFI_USB_INTERFACE_DESCRIPTOR InterfaceDescriptor;
EFI_USB_ENDPOINT_DESCRIPTOR InEndpointDescriptor;
EFI_USB_ENDPOINT_DESCRIPTOR OutEndpointDescriptor;
EFI_UNICODE_STRING_TABLE *ControllerNameTable;
UINT32 DataBufferHead;
UINT32 DataBufferTail;
UINT8 *DataBuffer;
EFI_SERIAL_IO_PROTOCOL SerialIo;
BOOLEAN Shutdown;
EFI_EVENT PollingLoop;
UINT32 ControlBits;
PREVIOUS_ATTRIBUTES LastSettings;
CONTROL_BITS ControlValues;
STATUS_BITS StatusValues;
UINT8 ReadBuffer[512];
} USB_SER_DEV;
#define USB_SER_DEV_FROM_THIS(a) \
CR(a, USB_SER_DEV, SerialIo, USB_SER_DEV_SIGNATURE)
//
// Global Variables
//
extern EFI_DRIVER_BINDING_PROTOCOL gUsbSerialDriverBinding;
extern EFI_COMPONENT_NAME_PROTOCOL gUsbSerialComponentName;
extern EFI_COMPONENT_NAME2_PROTOCOL gUsbSerialComponentName2;
//
// Functions of Driver Binding Protocol
//
/**
Check whether USB Serial driver supports this device.
@param This[in] The USB Serial driver binding protocol.
@param Controller[in] The controller handle to check.
@param RemainingDevicePath[in] The remaining device path.
@retval EFI_SUCCESS The driver supports this controller.
@retval other This device isn't supported.
**/
EFI_STATUS
EFIAPI
UsbSerialDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Starts the Serial device with this driver.
This function produces Serial IO Protocol and initializes the USB
Serial device to manage this USB Serial device.
@param This[in] The USB Serial driver binding instance.
@param Controller[in] Handle of device to bind driver to.
@param RemainingDevicePath[in] Optional parameter use to pick a specific
child device to start.
@retval EFI_SUCCESS The controller is controlled by the USB
Serial driver.
@retval EFI_UNSUPPORTED No interrupt endpoint can be found.
@retval Other This controller cannot be started.
**/
EFI_STATUS
EFIAPI
UsbSerialDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Stop the USB Serial device handled by this driver.
@param This[in] The USB Serial driver binding protocol.
@param Controller[in] The controller to release.
@param NumberOfChildren[in] The number of handles in ChildHandleBuffer.
@param ChildHandleBuffer[in] The array of child handle.
@retval EFI_SUCCESS The device was stopped.
@retval EFI_UNSUPPORTED Simple Text In Protocol or Simple Text In Ex
Protocol is not installed on Controller.
@retval EFI_DEVICE_ERROR The device could not be stopped due to a
device error.
@retval Others Fail to uninstall protocols attached on the
device.
**/
EFI_STATUS
EFIAPI
UsbSerialDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
);
//
// Serial IO Member Functions
//
/**
Writes data to a serial device.
@param This[in] Protocol instance pointer.
@param BufferSize[in, out] On input, the size of the Buffer. On output,
the amount of data actually written.
@param Buffer[in] The buffer of data to write
@retval EFI_SUCCESS The data was written.
@retval EFI_DEVICE_ERROR The device reported an error.
@retval EFI_TIMEOUT The data write was stopped due to a timeout.
**/
EFI_STATUS
EFIAPI
WriteSerialIo (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
IN VOID *Buffer
);
/**
Reads data from a serial device.
@param This[in] Protocol instance pointer.
@param BufferSize[in, out] On input, the size of the Buffer. On output,
the amount of data returned in Buffer.
@param Buffer[out] The buffer to return the data into.
@retval EFI_SUCCESS The data was read.
@retval EFI_DEVICE_ERROR The device reported an error.
@retval EFI_TIMEOUT The data write was stopped due to a timeout.
**/
EFI_STATUS
EFIAPI
ReadSerialIo (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
OUT VOID *Buffer
);
/**
Retrieves the status of the control bits on a serial device.
@param This[in] Protocol instance pointer.
@param Control[out] A pointer to return the current Control signals
from the serial device.
@retval EFI_SUCCESS The control bits were read from the serial
device.
@retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
**/
EFI_STATUS
EFIAPI
GetControlBits (
IN EFI_SERIAL_IO_PROTOCOL *This,
OUT UINT32 *Control
);
/**
Set the control bits on a serial device.
@param This[in] Protocol instance pointer.
@param Control[in] Set the bits of Control that are settable.
@retval EFI_SUCCESS The new control bits were set on the serial device.
@retval EFI_UNSUPPORTED The serial device does not support this operation.
@retval EFI_DEVICE_ERROR The serial device is not functioning correctly.
**/
EFI_STATUS
EFIAPI
SetControlBits (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN UINT32 Control
);
/**
Calls SetAttributesInternal() to set the baud rate, receive FIFO depth,
transmit/receice time out, parity, data buts, and stop bits on a serial device.
@param This[in] Protocol instance pointer.
@param BaudRate[in] The requested baud rate. A BaudRate value of 0
will use the device's default interface speed.
@param ReveiveFifoDepth[in] The requested depth of the FIFO on the receive
side of the serial interface. A ReceiveFifoDepth
value of 0 will use the device's default FIFO
depth.
@param Timeout[in] The requested time out for a single character in
microseconds.This timeout applies to both the
transmit and receive side of the interface.A
Timeout value of 0 will use the device's default
time out value.
@param Parity[in] The type of parity to use on this serial device.A
Parity value of DefaultParity will use the
device's default parity value.
@param DataBits[in] The number of data bits to use on the serial
device. A DataBits value of 0 will use the
device's default data bit setting.
@param StopBits[in] The number of stop bits to use on this serial
device. A StopBits value of DefaultStopBits will
use the device's default number of stop bits.
@retval EFI_SUCCESS The attributes were set
@retval EFI_DEVICE_ERROR The attributes were not able to be
**/
EFI_STATUS
EFIAPI
SetAttributes (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN UINT64 BaudRate,
IN UINT32 ReceiveFifoDepth,
IN UINT32 Timeout,
IN EFI_PARITY_TYPE Parity,
IN UINT8 DataBits,
IN EFI_STOP_BITS_TYPE StopBits
);
/**
Reset the serial device.
@param This Protocol instance pointer.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The serial device could not be reset.
**/
EFI_STATUS
EFIAPI
SerialReset (
IN EFI_SERIAL_IO_PROTOCOL *This
);
//
// EFI Component Name Functions
//
/**
Retrieves a Unicode string that is the user readable name of the driver.
This function retrieves the user readable name of a driver in the form of a
Unicode string. If the driver specified by This has a user readable name in
the language specified by Language, then a pointer to the driver name is
returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
by This does not support the language specified by Language,
then EFI_UNSUPPORTED is returned.
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL
or EFI_COMPONENT_NAME_PROTOCOL instance.
@param Language[in] A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller
is requesting, and it must match one of the
languages specified in SupportedLanguages.
The number of languages supported by a
driver is up to the driver writer. Language
is specified in RFC 4646 or ISO 639-2
language code format.
@param DriverName[out] A pointer to the Unicode string to return.
This Unicode string is the name of the
driver specified by This in the language
specified by Language.
@retval EFI_SUCCESS The Unicode string for the Driver specified
by This and the language specified by
Language was returned in DriverName.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER DriverName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This does not
support the language specified by Language.
**/
EFI_STATUS
EFIAPI
UsbSerialComponentNameGetDriverName (
IN EFI_COMPONENT_NAME2_PROTOCOL *This,
IN CHAR8 *Language,
OUT CHAR16 **DriverName
);
/**
Retrieves a Unicode string that is the user readable name of the controller
that is being managed by a driver.
This function retrieves the user readable name of the controller specified by
ControllerHandle and ChildHandle in the form of a Unicode string. If the
driver specified by This has a user readable name in the language specified by
Language, then a pointer to the controller name is returned in ControllerName,
and EFI_SUCCESS is returned. If the driver specified by This is not currently
managing the controller specified by ControllerHandle and ChildHandle,
then EFI_UNSUPPORTED is returned. If the driver specified by This does not
support the language specified by Language, then EFI_UNSUPPORTED is returned.
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL
or EFI_COMPONENT_NAME_PROTOCOL instance.
@param ControllerHandle[in] The handle of a controller that the driver
specified by This is managing. This handle
specifies the controller whose name is to
be returned.
@param ChildHandle[in] The handle of the child controller to
retrieve the name of. This is an optional
parameter that may be NULL. It will be NULL
for device drivers. It will also be NULL
for a bus drivers that wish to retrieve the
name of the bus controller. It will not be
NULL for a bus driver that wishes to
retrieve the name of a child controller.
@param Language[in] A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller
is requesting, and it must match one of the
languages specified in SupportedLanguages.
The number of languages supported by a
driver is up to the driver writer. Language
is specified in RFC 4646 or ISO 639-2
language code format.
@param ControllerName[out] A pointer to the Unicode string to return.
This Unicode string is the name of the
controller specified by ControllerHandle
and ChildHandle in the language specified
by Language from the point of view of the
driver specified by This.
@retval EFI_SUCCESS The Unicode string for the user readable
name in the language specified by Language
for the driver specified by This was
returned in DriverName.
@retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
@retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a
valid EFI_HANDLE.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER ControllerName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This is not
currently managing the controller specified
by ControllerHandle and ChildHandle.
@retval EFI_UNSUPPORTED The driver specified by This does not
support the language specified by Language.
**/
EFI_STATUS
EFIAPI
UsbSerialComponentNameGetControllerName (
IN EFI_COMPONENT_NAME2_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN EFI_HANDLE ChildHandle OPTIONAL,
IN CHAR8 *Language,
OUT CHAR16 **ControllerName
);
#endif
Reference in New Issue View Git Blame Copy Permalink