tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/QuarkSocPkg/QuarkNorthCluster/QNCInit/Dxe/DxeQNCSmbus.c

619 lines
21 KiB
C
Raw Blame History

/** @file
Implementation for SMBus DXE driver entry point and SMBus Host
Controller protocol.
Copyright (c) 2013-2015 Intel Corporation.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "CommonHeader.h"
#include "DxeQNCSmbus.h"
//
// Interface defintion of SMBUS Host Controller Protocol.
//
EFI_SMBUS_HC_PROTOCOL mSmbusHc = {
SmbusExecute,
SmbusArpDevice,
SmbusGetArpMap,
SmbusNotify
};
//
// Handle to install SMBus Host Controller protocol.
//
EFI_HANDLE mSmbusHcHandle = NULL;
UINT8 mDeviceMapEntries = 0;
EFI_SMBUS_DEVICE_MAP mDeviceMap[MAX_SMBUS_DEVICES];
UINT8 mPlatformNumRsvd = 0;
UINT8 *mPlatformAddrRsvd = NULL;
//
// These addresses are reserved by the SMBus 2.0 specification
//
UINT8 mReservedAddress[SMBUS_NUM_RESERVED] = {
0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0E, 0x10, 0x18, 0x50, 0x6E, 0xC2,
0xF0, 0xF2, 0xF4, 0xF6, 0xF8, 0xFA, 0xFC, 0xFE
};
/**
Gets Io port base address of Smbus Host Controller.
This internal function depends on a feature flag named PcdIchSmbusFixedIoPortBaseAddress
to retrieve Smbus Io port base. If that feature flag is true, it will get Smbus Io port base
address from a preset Pcd entry named PcdIchSmbusIoPortBaseAddress; otherwise, it will always
read Pci configuration space to get that value in each Smbus bus transaction.
@return The Io port base address of Smbus host controller.
**/
UINTN
GetSmbusIoPortBaseAddress (
VOID
)
{
UINTN IoPortBaseAddress;
if (FeaturePcdGet (PcdSmbaIoBaseAddressFixed)) {
IoPortBaseAddress = (UINTN) PcdGet16 (PcdSmbaIoBaseAddress);
} else {
IoPortBaseAddress = (UINTN) LpcPciCfg32 (R_QNC_LPC_SMBUS_BASE) & B_QNC_LPC_SMBUS_BASE_MASK;
}
//
// Make sure that the IO port base address has been properly set.
//
ASSERT (IoPortBaseAddress != 0);
return IoPortBaseAddress;
}
VOID
InitializeInternal (
)
{
UINTN IoPortBaseAddress;
IoPortBaseAddress = GetSmbusIoPortBaseAddress ();
//
// Step1: Enable QNC SMBUS I/O space.
//
LpcPciCfg32Or(R_QNC_LPC_SMBUS_BASE, B_QNC_LPC_SMBUS_BASE_EN);
//
// Step2: Clear Status Register before anyone uses the interfaces.
//
IoWrite8 (IoPortBaseAddress + R_QNC_SMBUS_HSTS, B_QNC_SMBUS_HSTS_ALL);
//
// Step3: Program the correct smbus clock
//
IoWrite8 (IoPortBaseAddress + R_QNC_SMBUS_HCLK, V_QNC_SMBUS_HCLK_100KHZ);
}
BOOLEAN
IsAddressAvailable (
IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress
)
{
UINT8 Index;
//
// See if we have already assigned this address to a device
//
for (Index = 0; Index < mDeviceMapEntries; Index++) {
if (SlaveAddress.SmbusDeviceAddress ==
mDeviceMap[Index].SmbusDeviceAddress.SmbusDeviceAddress) {
return FALSE;
}
}
//
// See if this address is claimed by a platform non-ARP-capable device
//
for (Index = 0; Index < mPlatformNumRsvd; Index++) {
if ((SlaveAddress.SmbusDeviceAddress << 1) == mPlatformAddrRsvd[Index]) {
return FALSE;
}
}
//
// See if this is a reserved address
//
for (Index = 0; Index < SMBUS_NUM_RESERVED; Index++) {
if (SlaveAddress.SmbusDeviceAddress == (UINTN) mReservedAddress[Index]) {
return FALSE;
}
}
return TRUE;
}
EFI_STATUS
GetNextAvailableAddress (
IN EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress
)
{
for (SlaveAddress->SmbusDeviceAddress = 0x03;
SlaveAddress->SmbusDeviceAddress < 0x7F;
SlaveAddress->SmbusDeviceAddress++
) {
if (IsAddressAvailable (*SlaveAddress)) {
return EFI_SUCCESS;
}
}
return EFI_OUT_OF_RESOURCES;
}
EFI_STATUS
SmbusPrepareToArp (
)
{
EFI_SMBUS_DEVICE_ADDRESS SlaveAddress;
EFI_STATUS Status;
UINTN Length;
UINT8 Buffer;
SlaveAddress.SmbusDeviceAddress = SMBUS_ADDRESS_ARP;
Length = 1;
Buffer = SMBUS_DATA_PREPARE_TO_ARP;
Status = Execute (
SlaveAddress,
0,
EfiSmbusSendByte,
TRUE,
&Length,
&Buffer
);
return Status;
}
EFI_STATUS
SmbusGetUdidGeneral (
IN OUT EFI_SMBUS_DEVICE_MAP *DeviceMap
)
{
EFI_SMBUS_DEVICE_ADDRESS SlaveAddress;
EFI_STATUS Status;
UINTN Length;
UINT8 Buffer[SMBUS_GET_UDID_LENGTH];
SlaveAddress.SmbusDeviceAddress = SMBUS_ADDRESS_ARP;
Length = SMBUS_GET_UDID_LENGTH;
Status = Execute (
SlaveAddress,
SMBUS_DATA_GET_UDID_GENERAL,
EfiSmbusReadBlock,
TRUE,
&Length,
Buffer
);
if (!EFI_ERROR(Status)) {
if (Length == SMBUS_GET_UDID_LENGTH) {
DeviceMap->SmbusDeviceUdid.DeviceCapabilities = Buffer[0];
DeviceMap->SmbusDeviceUdid.VendorRevision = Buffer[1];
DeviceMap->SmbusDeviceUdid.VendorId = (UINT16)((Buffer[2] << 8) + Buffer[3]);
DeviceMap->SmbusDeviceUdid.DeviceId = (UINT16)((Buffer[4] << 8) + Buffer[5]);
DeviceMap->SmbusDeviceUdid.Interface = (UINT16)((Buffer[6] << 8) + Buffer[7]);
DeviceMap->SmbusDeviceUdid.SubsystemVendorId = (UINT16)((Buffer[8] << 8) + Buffer[9]);
DeviceMap->SmbusDeviceUdid.SubsystemDeviceId = (UINT16)((Buffer[10] << 8) + Buffer[11]);
DeviceMap->SmbusDeviceUdid.VendorSpecificId = (UINT32)((Buffer[12] << 24) + (Buffer[13] << 16) + (Buffer[14] << 8) + Buffer[15]);
DeviceMap->SmbusDeviceAddress.SmbusDeviceAddress = (UINT8)(Buffer[16] >> 1);
} else {
Status = EFI_DEVICE_ERROR;
}
}
return Status;
}
EFI_STATUS
SmbusAssignAddress (
IN OUT EFI_SMBUS_DEVICE_MAP *DeviceMap
)
{
EFI_SMBUS_DEVICE_ADDRESS SlaveAddress;
EFI_STATUS Status;
UINTN Length;
UINT8 Buffer[SMBUS_GET_UDID_LENGTH];
Buffer[0] = DeviceMap->SmbusDeviceUdid.DeviceCapabilities;
Buffer[1] = DeviceMap->SmbusDeviceUdid.VendorRevision;
Buffer[2] = (UINT8)(DeviceMap->SmbusDeviceUdid.VendorId >> 8);
Buffer[3] = (UINT8)(DeviceMap->SmbusDeviceUdid.VendorId);
Buffer[4] = (UINT8)(DeviceMap->SmbusDeviceUdid.DeviceId >> 8);
Buffer[5] = (UINT8)(DeviceMap->SmbusDeviceUdid.DeviceId);
Buffer[6] = (UINT8)(DeviceMap->SmbusDeviceUdid.Interface >> 8);
Buffer[7] = (UINT8)(DeviceMap->SmbusDeviceUdid.Interface);
Buffer[8] = (UINT8)(DeviceMap->SmbusDeviceUdid.SubsystemVendorId >> 8);
Buffer[9] = (UINT8)(DeviceMap->SmbusDeviceUdid.SubsystemVendorId);
Buffer[10] = (UINT8)(DeviceMap->SmbusDeviceUdid.SubsystemDeviceId >> 8);
Buffer[11] = (UINT8)(DeviceMap->SmbusDeviceUdid.SubsystemDeviceId);
Buffer[12] = (UINT8)(DeviceMap->SmbusDeviceUdid.VendorSpecificId >> 24);
Buffer[13] = (UINT8)(DeviceMap->SmbusDeviceUdid.VendorSpecificId >> 16);
Buffer[14] = (UINT8)(DeviceMap->SmbusDeviceUdid.VendorSpecificId >> 8);
Buffer[15] = (UINT8)(DeviceMap->SmbusDeviceUdid.VendorSpecificId);
Buffer[16] = (UINT8)(DeviceMap->SmbusDeviceAddress.SmbusDeviceAddress << 1);
SlaveAddress.SmbusDeviceAddress = SMBUS_ADDRESS_ARP;
Length = SMBUS_GET_UDID_LENGTH;
Status = Execute (
SlaveAddress,
SMBUS_DATA_ASSIGN_ADDRESS,
EfiSmbusWriteBlock,
TRUE,
&Length,
Buffer
);
return Status;
}
EFI_STATUS
SmbusFullArp (
)
{
EFI_STATUS Status;
EFI_SMBUS_DEVICE_MAP *CurrentDeviceMap;
Status = SmbusPrepareToArp ();
if (EFI_ERROR(Status)) {
if (Status == EFI_DEVICE_ERROR) {
//
// ARP is complete
//
return EFI_SUCCESS;
} else {
return Status;
}
}
//
// Main loop to ARP all ARP-capable devices
//
do {
CurrentDeviceMap = &mDeviceMap[mDeviceMapEntries];
Status = SmbusGetUdidGeneral (CurrentDeviceMap);
if (EFI_ERROR(Status)) {
break;
}
if (CurrentDeviceMap->SmbusDeviceAddress.SmbusDeviceAddress == (0xFF >> 1)) {
//
// If address is unassigned, assign it
//
Status = GetNextAvailableAddress (
&CurrentDeviceMap->SmbusDeviceAddress
);
if (EFI_ERROR(Status)) {
return EFI_OUT_OF_RESOURCES;
}
} else if (((CurrentDeviceMap->SmbusDeviceUdid.DeviceCapabilities) & 0xC0) != 0) {
//
// if address is not fixed, check if the current address is available
//
if (!IsAddressAvailable (
CurrentDeviceMap->SmbusDeviceAddress
)) {
//
// if currently assigned address is already used, get a new one
//
Status = GetNextAvailableAddress (
&CurrentDeviceMap->SmbusDeviceAddress
);
if (EFI_ERROR(Status)) {
return EFI_OUT_OF_RESOURCES;
}
}
}
Status = SmbusAssignAddress (CurrentDeviceMap);
if (EFI_ERROR(Status)) {
//
// If there was a device error, just continue on and try again.
// Other errors should be reported.
//
if (Status != EFI_DEVICE_ERROR) {
return Status;
}
} else {
//
// If there was no error, the address was assigned and we must update our
// records.
//
mDeviceMapEntries++;
}
} while (mDeviceMapEntries < MAX_SMBUS_DEVICES);
return EFI_SUCCESS;
}
EFI_STATUS
SmbusDirectedArp (
IN EFI_SMBUS_UDID *SmbusUdid,
IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress
)
{
EFI_STATUS Status;
EFI_SMBUS_DEVICE_MAP *CurrentDeviceMap;
if (mDeviceMapEntries >= MAX_SMBUS_DEVICES) {
return EFI_OUT_OF_RESOURCES;
}
CurrentDeviceMap = &mDeviceMap[mDeviceMapEntries];
//
// Find an available address to assign
//
Status = GetNextAvailableAddress (
&CurrentDeviceMap->SmbusDeviceAddress
);
if (EFI_ERROR(Status)) {
return EFI_OUT_OF_RESOURCES;
}
CurrentDeviceMap->SmbusDeviceUdid.DeviceCapabilities = SmbusUdid->DeviceCapabilities;
CurrentDeviceMap->SmbusDeviceUdid.DeviceId = SmbusUdid->DeviceId;
CurrentDeviceMap->SmbusDeviceUdid.Interface = SmbusUdid->Interface;
CurrentDeviceMap->SmbusDeviceUdid.SubsystemDeviceId = SmbusUdid->SubsystemDeviceId;
CurrentDeviceMap->SmbusDeviceUdid.SubsystemVendorId = SmbusUdid->SubsystemVendorId;
CurrentDeviceMap->SmbusDeviceUdid.VendorId = SmbusUdid->VendorId;
CurrentDeviceMap->SmbusDeviceUdid.VendorRevision = SmbusUdid->VendorRevision;
CurrentDeviceMap->SmbusDeviceUdid.VendorSpecificId = SmbusUdid->VendorSpecificId;
Status = SmbusAssignAddress (CurrentDeviceMap);
if (EFI_ERROR(Status)) {
return Status;
}
mDeviceMapEntries++;
SlaveAddress->SmbusDeviceAddress = CurrentDeviceMap->SmbusDeviceAddress.SmbusDeviceAddress;
return EFI_SUCCESS;
}
/**
Executes an SMBus operation to an SMBus controller. Returns when either the command has been
executed or an error is encountered in doing the operation.
The Execute() function provides a standard way to execute an operation as defined in the System
Management Bus (SMBus) Specification. The resulting transaction will be either that the SMBus
slave devices accept this transaction or that this function returns with error.
@param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance.
@param SlaveAddress The SMBus slave address of the device with which to communicate.
@param Command This command is transmitted by the SMBus host controller to the
SMBus slave device and the interpretation is SMBus slave device
specific. It can mean the offset to a list of functions inside an
SMBus slave device. Not all operations or slave devices support
this command's registers.
@param Operation Signifies which particular SMBus hardware protocol instance that
it will use to execute the SMBus transactions. This SMBus
hardware protocol is defined by the SMBus Specification and is
not related to EFI.
@param PecCheck Defines if Packet Error Code (PEC) checking is required for this
operation.
@param Length Signifies the number of bytes that this operation will do. The
maximum number of bytes can be revision specific and operation
specific. This field will contain the actual number of bytes that
are executed for this operation. Not all operations require this
argument.
@param Buffer Contains the value of data to execute to the SMBus slave device.
Not all operations require this argument. The length of this
buffer is identified by Length.
@retval EFI_SUCCESS The last data that was returned from the access matched the poll
exit criteria.
@retval EFI_CRC_ERROR Checksum is not correct (PEC is incorrect).
@retval EFI_TIMEOUT Timeout expired before the operation was completed. Timeout is
determined by the SMBus host controller device.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_DEVICE_ERROR The request was not completed because a failure that was
reflected in the Host Status Register bit. Device errors are a
result of a transaction collision, illegal command field,
unclaimed cycle (host initiated), or bus errors (collisions).
@retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.
@retval EFI_INVALID_PARAMETER Length/Buffer is NULL for operations except for EfiSmbusQuickRead
and EfiSmbusQuickWrite. Length is outside the range of valid
values.
@retval EFI_UNSUPPORTED The SMBus operation or PEC is not supported.
@retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for this operation.
**/
EFI_STATUS
EFIAPI
SmbusExecute (
IN CONST EFI_SMBUS_HC_PROTOCOL *This,
IN CONST EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
IN CONST EFI_SMBUS_DEVICE_COMMAND Command,
IN CONST EFI_SMBUS_OPERATION Operation,
IN CONST BOOLEAN PecCheck,
IN OUT UINTN *Length,
IN OUT VOID *Buffer
)
{
InitializeInternal ();
return Execute (
SlaveAddress,
Command,
Operation,
PecCheck,
Length,
Buffer
);
}
/**
Sets the SMBus slave device addresses for the device with a given unique ID or enumerates the
entire bus.
The ArpDevice() function provides a standard way for a device driver to enumerate the entire
SMBus or specific devices on the bus.
@param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance.
@param ArpAll A Boolean expression that indicates if the host drivers need to
enumerate all the devices or enumerate only the device that is
identified by SmbusUdid. If ArpAll is TRUE, SmbusUdid and
SlaveAddress are optional. If ArpAll is FALSE, ArpDevice will
enumerate SmbusUdid and the address will be at SlaveAddress.
@param SmbusUdid The Unique Device Identifier (UDID) that is associated with this
device.
@param SlaveAddress The SMBus slave address that is associated with an SMBus UDID.
@retval EFI_SUCCESS The last data that was returned from the access matched the poll
exit criteria.
@retval EFI_CRC_ERROR Checksum is not correct (PEC is incorrect).
@retval EFI_TIMEOUT Timeout expired before the operation was completed. Timeout is
determined by the SMBus host controller device.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_DEVICE_ERROR The request was not completed because a failure that was
reflected in the Host Status Register bit. Device errors are a
result of a transaction collision, illegal command field,
unclaimed cycle (host initiated), or bus errors (collisions).
@retval EFI_UNSUPPORTED The corresponding SMBus operation is not supported.
**/
EFI_STATUS
EFIAPI
SmbusArpDevice (
IN CONST EFI_SMBUS_HC_PROTOCOL *This,
IN BOOLEAN ArpAll,
IN EFI_SMBUS_UDID *SmbusUdid, OPTIONAL
IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress OPTIONAL
)
{
InitializeInternal ();
if (ArpAll) {
return SmbusFullArp ();
} else {
if ((SmbusUdid == NULL) || (SlaveAddress == NULL)) {
return EFI_INVALID_PARAMETER;
}
return SmbusDirectedArp ((EFI_SMBUS_UDID *)SmbusUdid, SlaveAddress);
}
}
/**
Returns a pointer to the Address Resolution Protocol (ARP) map that contains the ID/address pair
of the slave devices that were enumerated by the SMBus host controller driver.
The GetArpMap() function returns the mapping of all the SMBus devices that were enumerated by the
SMBus host driver.
@param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance.
@param Length Size of the buffer that contains the SMBus device map.
@param SmbusDeviceMap The pointer to the device map as enumerated by the SMBus
controller driver.
@retval EFI_SUCCESS The SMBus returned the current device map.
@retval EFI_UNSUPPORTED The corresponding operation is not supported.
**/
EFI_STATUS
EFIAPI
SmbusGetArpMap (
IN CONST EFI_SMBUS_HC_PROTOCOL *This,
IN OUT UINTN *Length,
IN OUT EFI_SMBUS_DEVICE_MAP **SmbusDeviceMap
)
{
*Length = mDeviceMapEntries;
*SmbusDeviceMap = mDeviceMap;
return EFI_SUCCESS;
}
/**
Allows a device driver to register for a callback when the bus driver detects a state that it
needs to propagate to other drivers that are registered for a callback.
The Notify() function registers all the callback functions to allow the bus driver to call these
functions when the SlaveAddress/Data pair happens.
If NotifyFunction is NULL, then ASSERT ().
@param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance.
@param SlaveAddress The SMBUS hardware address to which the SMBUS device is
preassigned or allocated.
@param Data Data of the SMBus host notify command that the caller wants to be
called.
@param NotifyFunction The function to call when the bus driver detects the SlaveAddress
and Data pair.
@retval EFI_SUCCESS NotifyFunction was registered.
@retval EFI_UNSUPPORTED The corresponding operation is not supported.
**/
EFI_STATUS
EFIAPI
SmbusNotify (
IN CONST EFI_SMBUS_HC_PROTOCOL *This,
IN CONST EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
IN CONST UINTN Data,
IN CONST EFI_SMBUS_NOTIFY_FUNCTION NotifyFunction
)
{
return EFI_UNSUPPORTED;
}
/**
Entry point to the DXE Driver that produces the SMBus Host Controller Protocol.
@param ImageHandle ImageHandle of the loaded driver.
@param SystemTable Pointer to the EFI System Table.
@retval EFI_SUCCESS The entry point of SMBus DXE driver is executed successfully.
@retval !EFI_SUCESS Some error occurs in the entry point of SMBus DXE driver.
**/
EFI_STATUS
EFIAPI
InitializeQNCSmbus (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
mPlatformNumRsvd = (UINT8)PcdGet32 (PcdPlatformSmbusAddrNum);
mPlatformAddrRsvd = (UINT8 *)(UINTN) PcdGet64 (PcdPlatformSmbusAddrTable);
//
// Install SMBus Host Controller protocol interface.
//
Status = gBS->InstallMultipleProtocolInterfaces (
&mSmbusHcHandle,
&gEfiSmbusHcProtocolGuid,
&mSmbusHc,
NULL
);
ASSERT_EFI_ERROR (Status);
return Status;
}
Reference in New Issue View Git Blame Copy Permalink