audk/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c

/** @file

Copyright (c) 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

Module Name:

  UsbMassImpl.c

Abstract:

  The implementation of USB mass storage class device driver.
  The command set supported is "USB Mass Storage Specification
  for Bootability".

Revision History


**/

#include "UsbMassImpl.h"

//
// The underlying transport protocol. CBI support isn't included
// in the current build. It is being obseleted by the standard
// body. If you want to enable it, remove the if directive here,
// then add the UsbMassCbi.c/.h to the driver's inf file.
//
STATIC
USB_MASS_TRANSPORT *mUsbMassTransport[] = {
  &mUsbCbi0Transport,
  &mUsbCbi1Transport,
  &mUsbBotTransport,
  NULL
};

UINTN mUsbMscInfo  = DEBUG_INFO;
UINTN mUsbMscError = DEBUG_ERROR;


/**
  Retrieve the media parameters such as disk gemotric for the
  device's BLOCK IO protocol.

  @param  UsbMass                The USB mass storage device

  @retval EFI_SUCCESS            The media parameters is updated successfully.
  @retval Others                 Failed to get the media parameters.

**/
EFI_STATUS
UsbMassInitMedia (
  IN USB_MASS_DEVICE          *UsbMass
  )
{
  EFI_BLOCK_IO_MEDIA          *Media;
  EFI_STATUS                  Status;
  UINTN                       Index;

  Media = &UsbMass->BlockIoMedia;

  //
  // Initialize the MediaPrsent/ReadOnly and others to the default.
  // We are not forced to get it right at this time, check UEFI2.0
  // spec for more information:
  //
  // MediaPresent: This field shows the media present status as
  //               of the most recent ReadBlocks or WriteBlocks call.
  //
  // ReadOnly    : This field shows the read-only status as of the
  //               recent WriteBlocks call.
  //
  // but remember to update MediaId/MediaPresent/ReadOnly status
  // after ReadBlocks and WriteBlocks
  //
  Media->MediaPresent     = FALSE;
  Media->LogicalPartition = FALSE;
  Media->ReadOnly         = FALSE;
  Media->WriteCaching     = FALSE;
  Media->IoAlign          = 0;

  //
  // Some device may spend several seconds before it is ready.
  // Try several times before giving up. Wait 5s at most.
  //
  Status = EFI_SUCCESS;

  for (Index = 0; Index < USB_BOOT_WAIT_RETRY; Index++) {

    Status = UsbBootGetParams (UsbMass);
    if ((Status != EFI_MEDIA_CHANGED)
        && (Status != EFI_NOT_READY)
        && (Status != EFI_TIMEOUT)) {
      break;
    }

    Status = UsbBootIsUnitReady (UsbMass);
    if (EFI_ERROR (Status)) {
      gBS->Stall (USB_BOOT_UNIT_READY_STALL * (Index + 1));
    }

  }

  return Status;
}


/**
  Reset the block device. ExtendedVerification is ignored for this.

  @param  This                   The BLOCK IO protocol
  @param  ExtendedVerification   Whether to execute extended verfication.

  @retval EFI_SUCCESS            The device is successfully resetted.
  @retval Others                 Failed to reset the device.

**/
EFI_STATUS
UsbMassReset (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN BOOLEAN                  ExtendedVerification
  )
{
  USB_MASS_DEVICE *UsbMass;

  UsbMass = USB_MASS_DEVICE_FROM_BLOCKIO (This);
  return UsbMass->Transport->Reset (UsbMass->Context, ExtendedVerification);
}


/**
  Read some blocks of data from the block device.

  @param  This                   The Block IO protocol
  @param  MediaId                The media's ID of the device for current request
  @param  Lba                    The start block number
  @param  BufferSize             The size of buffer to read data in
  @param  Buffer                 The buffer to read data to

  @retval EFI_SUCCESS            The data is successfully read
  @retval EFI_NO_MEDIA           Media isn't present
  @retval EFI_MEDIA_CHANGED      The device media has been changed, that is,
                                 MediaId changed
  @retval EFI_INVALID_PARAMETER  Some parameters are invalid, such as Buffer is
                                 NULL.
  @retval EFI_BAD_BUFFER_SIZE    The buffer size isn't a multiple of media's block
                                 size,  or overflow the last block number.

**/
EFI_STATUS
UsbMassReadBlocks (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN UINT32                   MediaId,
  IN EFI_LBA                  Lba,
  IN UINTN                    BufferSize,
  OUT VOID                    *Buffer
  )
{
  USB_MASS_DEVICE     *UsbMass;
  EFI_BLOCK_IO_MEDIA  *Media;
  EFI_STATUS          Status;
  UINTN               TotalBlock;

  UsbMass = USB_MASS_DEVICE_FROM_BLOCKIO (This);
  Media   = &UsbMass->BlockIoMedia;

  //
  // First, validate the parameters
  //
  if ((Buffer == NULL) || (BufferSize == 0)) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // If it is a remoable media, such as CD-Rom or Usb-Floppy,
  // if, need to detect the media before each rw, while Usb-Flash
  // needn't. However, it's hard to identify Usb-Floppy between
  // Usb-Flash by now, so detect media every time.
  //
  Status = UsbBootDetectMedia (UsbMass);
  if (EFI_ERROR (Status)) {
    DEBUG ((mUsbMscError, "UsbMassReadBlocks: UsbBootDetectMedia (%r)\n", Status));
    return Status;
  }

  //
  // Make sure BlockSize and LBA is consistent with BufferSize
  //
  if ((BufferSize % Media->BlockSize) != 0) {
    return EFI_BAD_BUFFER_SIZE;
  }

  TotalBlock = BufferSize / Media->BlockSize;

  if (Lba + TotalBlock - 1 > Media->LastBlock) {
    return EFI_BAD_BUFFER_SIZE;
  }

  Status = UsbBootReadBlocks (UsbMass, (UINT32) Lba, TotalBlock, Buffer);
  if (EFI_ERROR (Status)) {
    DEBUG ((mUsbMscError, "UsbMassReadBlocks: UsbBootReadBlocks (%r) -> Reset\n", Status));
    UsbMassReset (This, TRUE);
  }

  return Status;
}


/**
  Write some blocks of data to the block device.

  @param  This                   The Block IO protocol
  @param  MediaId                The media's ID of the device for current request
  @param  Lba                    The start block number
  @param  BufferSize             The size of buffer to write data to
  @param  Buffer                 The buffer to write data to

  @retval EFI_SUCCESS            The data is successfully written
  @retval EFI_NO_MEDIA           Media isn't present
  @retval EFI_MEDIA_CHANGED      The device media has been changed, that is,
                                 MediaId changed
  @retval EFI_INVALID_PARAMETER  Some parameters are invalid, such as Buffer is
                                 NULL.
  @retval EFI_BAD_BUFFER_SIZE    The buffer size isn't a multiple of media's block
                                 size,

**/
EFI_STATUS
UsbMassWriteBlocks (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN UINT32                   MediaId,
  IN EFI_LBA                  Lba,
  IN UINTN                    BufferSize,
  IN VOID                     *Buffer
  )
{
  USB_MASS_DEVICE     *UsbMass;
  EFI_BLOCK_IO_MEDIA  *Media;
  EFI_STATUS          Status;
  UINTN               TotalBlock;

  UsbMass = USB_MASS_DEVICE_FROM_BLOCKIO (This);
  Media   = &UsbMass->BlockIoMedia;

  //
  // First, validate the parameters
  //
  if ((Buffer == NULL) || (BufferSize == 0)) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // If it is a remoable media, such as CD-Rom or Usb-Floppy,
  // if, need to detect the media before each rw, while Usb-Flash
  // needn't. However, it's hard to identify Usb-Floppy between
  // Usb-Flash by now, so detect media every time.
  //
  Status = UsbBootDetectMedia (UsbMass);
  if (EFI_ERROR (Status)) {
    DEBUG ((mUsbMscError, "UsbMassWriteBlocks: UsbBootDetectMedia (%r)\n", Status));
    return Status;
  }

  //
  // Make sure BlockSize and LBA is consistent with BufferSize
  //
  if ((BufferSize % Media->BlockSize) != 0) {
    return EFI_BAD_BUFFER_SIZE;
  }

  TotalBlock = BufferSize / Media->BlockSize;

  if (Lba + TotalBlock - 1 > Media->LastBlock) {
    return EFI_BAD_BUFFER_SIZE;
  }

  //
  // Try to write the data even the device is marked as ReadOnly,
  // and clear the status should the write succeed.
  //
  Status = UsbBootWriteBlocks (UsbMass, (UINT32) Lba, TotalBlock, Buffer);
  if (EFI_ERROR (Status)) {
    DEBUG ((mUsbMscError, "UsbMassWriteBlocks: UsbBootWriteBlocks (%r) -> Reset\n", Status));
    UsbMassReset (This, TRUE);
  }

  return Status;
}


/**
  Flush the cached writes to disks. USB mass storage device doesn't
  support write cache, so return EFI_SUCCESS directly.

  @param  This                   The BLOCK IO protocol

  @retval EFI_SUCCESS            Always returns success

**/
EFI_STATUS
UsbMassFlushBlocks (
  IN EFI_BLOCK_IO_PROTOCOL  *This
  )
{
  return EFI_SUCCESS;
}


/**
  Check whether the controller is a supported USB mass storage.

  @param  This                   The USB mass driver's driver binding.
  @param  Controller             The device to test against.
  @param  RemainingDevicePath    The remaining device path

  @retval EFI_SUCCESS            This device is a supported USB mass storage.
  @retval EFI_UNSUPPORTED        The device isn't supported
  @retval Others                 Some error happened.

**/
EFI_STATUS
EFIAPI
USBMassDriverBindingSupported (
  IN EFI_DRIVER_BINDING_PROTOCOL  *This,
  IN EFI_HANDLE                   Controller,
  IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath
  )
{
  EFI_USB_IO_PROTOCOL           *UsbIo;
  EFI_USB_INTERFACE_DESCRIPTOR  Interface;
  USB_MASS_TRANSPORT            *Transport;
  EFI_STATUS                    Status;
  INTN                          Index;

  //
  // Check whether the controlelr support USB_IO
  //
  Status = gBS->OpenProtocol (
                  Controller,
                  &gEfiUsbIoProtocolGuid,
                  (VOID **) &UsbIo,
                  This->DriverBindingHandle,
                  Controller,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Get the interface to check the USB class and find a transport
  // protocol handler.
  //
  Status = UsbIo->UsbGetInterfaceDescriptor (UsbIo, &Interface);
  if (EFI_ERROR (Status)) {
    goto ON_EXIT;
  }

  Status = EFI_UNSUPPORTED;

  if (Interface.InterfaceClass != USB_MASS_STORE_CLASS) {
    goto ON_EXIT;
  }

  for (Index = 0; mUsbMassTransport[Index] != NULL; Index++) {
    Transport = mUsbMassTransport[Index];
    if (Interface.InterfaceProtocol == Transport->Protocol) {
      Status = Transport->Init (UsbIo, Controller, NULL);
      break;
    }
  }

  DEBUG ((mUsbMscInfo, "Found a USB mass store device %r\n", Status));

ON_EXIT:
  gBS->CloseProtocol (
        Controller,
        &gEfiUsbIoProtocolGuid,
        This->DriverBindingHandle,
        Controller
        );

  return Status;
}


/**
  Start the USB mass storage device on the controller. It will
  install a BLOCK_IO protocol on the device if everything is OK.

  @param  This                   The USB mass storage driver binding.
  @param  Controller             The USB mass storage device to start on
  @param  RemainingDevicePath    The remaining device path.

  @retval EFI_SUCCESS            The driver has started on the device.
  @retval EFI_OUT_OF_RESOURCES   Failed to allocate memory
  @retval Others                 Failed to start the driver on the device.

**/
EFI_STATUS
EFIAPI
USBMassDriverBindingStart (
  IN EFI_DRIVER_BINDING_PROTOCOL  *This,
  IN EFI_HANDLE                   Controller,
  IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath
  )
{
  EFI_USB_IO_PROTOCOL           *UsbIo;
  EFI_USB_INTERFACE_DESCRIPTOR  Interface;
  USB_MASS_DEVICE               *UsbMass;
  USB_MASS_TRANSPORT            *Transport;
  EFI_STATUS                    Status;
  UINTN                         Index;

  Status = gBS->OpenProtocol (
                  Controller,
                  &gEfiUsbIoProtocolGuid,
                  (VOID **) &UsbIo,
                  This->DriverBindingHandle,
                  Controller,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );

  if (EFI_ERROR (Status)) {
    return Status;
  }

  UsbMass = AllocateZeroPool (sizeof (USB_MASS_DEVICE));
  if (UsbMass == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }

  //
  // Initialize the transport protocols
  //
  Status = UsbIo->UsbGetInterfaceDescriptor (UsbIo, &Interface);
  if (EFI_ERROR (Status)) {
    DEBUG ((mUsbMscError, "USBMassDriverBindingStart: UsbIo->UsbGetInterfaceDescriptor (%r)\n", Status));
    goto ON_ERROR;
  }

  Status = EFI_UNSUPPORTED;

  for (Index = 0; mUsbMassTransport[Index] != NULL; Index++) {
    Transport = mUsbMassTransport[Index];

    if (Interface.InterfaceProtocol == Transport->Protocol) {
      UsbMass->Transport = Transport;
      Status             = Transport->Init (UsbIo, Controller, &UsbMass->Context);
      break;
    }
  }

  if (EFI_ERROR (Status)) {
    DEBUG ((mUsbMscError, "USBMassDriverBindingStart: Transport->Init (%r)\n", Status));
    goto ON_ERROR;
  }

  UsbMass->Signature            = USB_MASS_SIGNATURE;
  UsbMass->Controller           = Controller;
  UsbMass->UsbIo                = UsbIo;
  UsbMass->BlockIo.Media        = &UsbMass->BlockIoMedia;
  UsbMass->BlockIo.Reset        = UsbMassReset;
  UsbMass->BlockIo.ReadBlocks   = UsbMassReadBlocks;
  UsbMass->BlockIo.WriteBlocks  = UsbMassWriteBlocks;
  UsbMass->BlockIo.FlushBlocks  = UsbMassFlushBlocks;
  UsbMass->OpticalStorage       = FALSE;

  //
  // Get the storage's parameters, such as last block number.
  // then install the BLOCK_IO
  //
  Status = UsbMassInitMedia (UsbMass);
  if (!EFI_ERROR (Status)) {
    if ((UsbMass->Pdt != USB_PDT_DIRECT_ACCESS) &&
         (UsbMass->Pdt != USB_PDT_CDROM) &&
         (UsbMass->Pdt != USB_PDT_OPTICAL) &&
         (UsbMass->Pdt != USB_PDT_SIMPLE_DIRECT)) {
      DEBUG ((mUsbMscError, "USBMassDriverBindingStart: Found an unsupported peripheral type[%d]\n", UsbMass->Pdt));
      goto ON_ERROR;
    }
  } else if (Status != EFI_NO_MEDIA){
    DEBUG ((mUsbMscError, "USBMassDriverBindingStart: UsbMassInitMedia (%r)\n", Status));
    goto ON_ERROR;
  }

  Status = gBS->InstallProtocolInterface (
                  &Controller,
                  &gEfiBlockIoProtocolGuid,
                  EFI_NATIVE_INTERFACE,
                  &UsbMass->BlockIo
                  );
  if (EFI_ERROR (Status)) {
    goto ON_ERROR;
  }

  return EFI_SUCCESS;

ON_ERROR:
  gBS->FreePool (UsbMass);

  gBS->CloseProtocol (
        Controller,
        &gEfiUsbIoProtocolGuid,
        This->DriverBindingHandle,
        Controller
        );

  return Status;
}


/**
  Stop controlling the device.

  @param  This                   The USB mass storage driver binding
  @param  Controller             The device controller controlled by the driver.
  @param  NumberOfChildren       The number of children of this device
  @param  ChildHandleBuffer      The buffer of children handle.

  @retval EFI_SUCCESS            The driver stopped from controlling the device.
  @retval Others                 Failed to stop the driver

**/
EFI_STATUS
EFIAPI
USBMassDriverBindingStop (
  IN  EFI_DRIVER_BINDING_PROTOCOL *This,
  IN  EFI_HANDLE                  Controller,
  IN  UINTN                       NumberOfChildren,
  IN  EFI_HANDLE                  *ChildHandleBuffer
  )
{
  EFI_STATUS            Status;
  USB_MASS_DEVICE       *UsbMass;
  EFI_BLOCK_IO_PROTOCOL *BlockIo;

  //
  // First, get our context back from the BLOCK_IO
  //
  Status = gBS->OpenProtocol (
                  Controller,
                  &gEfiBlockIoProtocolGuid,
                  (VOID **) &BlockIo,
                  This->DriverBindingHandle,
                  Controller,
                  EFI_OPEN_PROTOCOL_GET_PROTOCOL
                  );

  if (EFI_ERROR (Status)) {
    return Status;
  }

  UsbMass = USB_MASS_DEVICE_FROM_BLOCKIO (BlockIo);

  //
  // Uninstall Block I/O protocol from the device handle,
  // then call the transport protocol to stop itself.
  //
  Status = gBS->UninstallProtocolInterface (
                  Controller,
                  &gEfiBlockIoProtocolGuid,
                  &UsbMass->BlockIo
                  );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  gBS->CloseProtocol (
        Controller,
        &gEfiUsbIoProtocolGuid,
        This->DriverBindingHandle,
        Controller
        );

  UsbMass->Transport->Fini (UsbMass->Context);
  gBS->FreePool (UsbMass);

  return EFI_SUCCESS;
}

EFI_DRIVER_BINDING_PROTOCOL gUSBMassDriverBinding = {
  USBMassDriverBindingSupported,
  USBMassDriverBindingStart,
  USBMassDriverBindingStop,
  0x11,
  NULL,
  NULL
};

EFI_STATUS
EFIAPI
USBMassStorageEntryPoint (
  IN EFI_HANDLE               ImageHandle,
  IN EFI_SYSTEM_TABLE         *SystemTable
  )
/*++

Routine Description:

  The entry point for the driver, which will install the driver binding and
  component name protocol

Arguments:

  ImageHandle - The image handle of this driver
  SystemTable - The system table

Returns:

  EFI_SUCCESS - the protocols are installed OK
  Others      - Failed to install protocols.

--*/
{
  EFI_STATUS  Status;

  //
  // Install driver binding protocol
  //
  Status = EfiLibInstallAllDriverProtocols (
             ImageHandle,
             SystemTable,
             &gUSBMassDriverBinding,
             ImageHandle,
             &gUsbMassStorageComponentName,
             NULL,
             NULL
             );

  return Status;
}