tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/BaseTools/Source/Python/build/build.py

2076 lines
96 KiB
Python
Raw Blame History

## @file
# build a platform or a module
#
# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##
# Import Modules
#
import Common.LongFilePathOs as os
import re
import StringIO
import sys
import glob
import time
import platform
import traceback
import encodings.ascii
from struct import *
from threading import *
from optparse import OptionParser
from subprocess import *
from Common import Misc as Utils
from Common.LongFilePathSupport import OpenLongFilePath as open
from Common.LongFilePathSupport import LongFilePath
from Common.TargetTxtClassObject import *
from Common.ToolDefClassObject import *
from Common.DataType import *
from Common.BuildVersion import gBUILD_VERSION
from AutoGen.AutoGen import *
from Common.BuildToolError import *
from Workspace.WorkspaceDatabase import *
from BuildReport import BuildReport
from GenPatchPcdTable.GenPatchPcdTable import *
from PatchPcdValue.PatchPcdValue import *
import Common.EdkLogger
import Common.GlobalData as GlobalData
# Version and Copyright
VersionNumber = "0.51" + ' ' + gBUILD_VERSION
__version__ = "%prog Version " + VersionNumber
__copyright__ = "Copyright (c) 2007 - 2014, Intel Corporation All rights reserved."
## standard targets of build command
gSupportedTarget = ['all', 'genc', 'genmake', 'modules', 'libraries', 'fds', 'clean', 'cleanall', 'cleanlib', 'run']
## build configuration file
gBuildConfiguration = "Conf/target.txt"
gBuildCacheDir = "Conf/.cache"
gToolsDefinition = "Conf/tools_def.txt"
TemporaryTablePattern = re.compile(r'^_\d+_\d+_[a-fA-F0-9]+$')
TmpTableDict = {}
## Check environment PATH variable to make sure the specified tool is found
#
# If the tool is found in the PATH, then True is returned
# Otherwise, False is returned
#
def IsToolInPath(tool):
if os.environ.has_key('PATHEXT'):
extns = os.environ['PATHEXT'].split(os.path.pathsep)
else:
extns = ('',)
for pathDir in os.environ['PATH'].split(os.path.pathsep):
for ext in extns:
if os.path.exists(os.path.join(pathDir, tool + ext)):
return True
return False
## Check environment variables
#
# Check environment variables that must be set for build. Currently they are
#
# WORKSPACE The directory all packages/platforms start from
# EDK_TOOLS_PATH The directory contains all tools needed by the build
# PATH $(EDK_TOOLS_PATH)/Bin/<sys> must be set in PATH
#
# If any of above environment variable is not set or has error, the build
# will be broken.
#
def CheckEnvVariable():
# check WORKSPACE
if "WORKSPACE" not in os.environ:
EdkLogger.error("build", ATTRIBUTE_NOT_AVAILABLE, "Environment variable not found",
ExtraData="WORKSPACE")
WorkspaceDir = os.path.normcase(os.path.normpath(os.environ["WORKSPACE"]))
if not os.path.exists(WorkspaceDir):
EdkLogger.error("build", FILE_NOT_FOUND, "WORKSPACE doesn't exist", ExtraData="%s" % WorkspaceDir)
elif ' ' in WorkspaceDir:
EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in WORKSPACE path",
ExtraData=WorkspaceDir)
os.environ["WORKSPACE"] = WorkspaceDir
#
# Check EFI_SOURCE (Edk build convention). EDK_SOURCE will always point to ECP
#
if "ECP_SOURCE" not in os.environ:
os.environ["ECP_SOURCE"] = os.path.join(WorkspaceDir, GlobalData.gEdkCompatibilityPkg)
if "EFI_SOURCE" not in os.environ:
os.environ["EFI_SOURCE"] = os.environ["ECP_SOURCE"]
if "EDK_SOURCE" not in os.environ:
os.environ["EDK_SOURCE"] = os.environ["ECP_SOURCE"]
#
# Unify case of characters on case-insensitive systems
#
EfiSourceDir = os.path.normcase(os.path.normpath(os.environ["EFI_SOURCE"]))
EdkSourceDir = os.path.normcase(os.path.normpath(os.environ["EDK_SOURCE"]))
EcpSourceDir = os.path.normcase(os.path.normpath(os.environ["ECP_SOURCE"]))
os.environ["EFI_SOURCE"] = EfiSourceDir
os.environ["EDK_SOURCE"] = EdkSourceDir
os.environ["ECP_SOURCE"] = EcpSourceDir
os.environ["EDK_TOOLS_PATH"] = os.path.normcase(os.environ["EDK_TOOLS_PATH"])
if not os.path.exists(EcpSourceDir):
EdkLogger.verbose("ECP_SOURCE = %s doesn't exist. Edk modules could not be built." % EcpSourceDir)
elif ' ' in EcpSourceDir:
EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in ECP_SOURCE path",
ExtraData=EcpSourceDir)
if not os.path.exists(EdkSourceDir):
if EdkSourceDir == EcpSourceDir:
EdkLogger.verbose("EDK_SOURCE = %s doesn't exist. Edk modules could not be built." % EdkSourceDir)
else:
EdkLogger.error("build", PARAMETER_INVALID, "EDK_SOURCE does not exist",
ExtraData=EdkSourceDir)
elif ' ' in EdkSourceDir:
EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in EDK_SOURCE path",
ExtraData=EdkSourceDir)
if not os.path.exists(EfiSourceDir):
if EfiSourceDir == EcpSourceDir:
EdkLogger.verbose("EFI_SOURCE = %s doesn't exist. Edk modules could not be built." % EfiSourceDir)
else:
EdkLogger.error("build", PARAMETER_INVALID, "EFI_SOURCE does not exist",
ExtraData=EfiSourceDir)
elif ' ' in EfiSourceDir:
EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in EFI_SOURCE path",
ExtraData=EfiSourceDir)
# change absolute path to relative path to WORKSPACE
if EfiSourceDir.upper().find(WorkspaceDir.upper()) != 0:
EdkLogger.error("build", PARAMETER_INVALID, "EFI_SOURCE is not under WORKSPACE",
ExtraData="WORKSPACE = %s\n EFI_SOURCE = %s" % (WorkspaceDir, EfiSourceDir))
if EdkSourceDir.upper().find(WorkspaceDir.upper()) != 0:
EdkLogger.error("build", PARAMETER_INVALID, "EDK_SOURCE is not under WORKSPACE",
ExtraData="WORKSPACE = %s\n EDK_SOURCE = %s" % (WorkspaceDir, EdkSourceDir))
if EcpSourceDir.upper().find(WorkspaceDir.upper()) != 0:
EdkLogger.error("build", PARAMETER_INVALID, "ECP_SOURCE is not under WORKSPACE",
ExtraData="WORKSPACE = %s\n ECP_SOURCE = %s" % (WorkspaceDir, EcpSourceDir))
# check EDK_TOOLS_PATH
if "EDK_TOOLS_PATH" not in os.environ:
EdkLogger.error("build", ATTRIBUTE_NOT_AVAILABLE, "Environment variable not found",
ExtraData="EDK_TOOLS_PATH")
# check PATH
if "PATH" not in os.environ:
EdkLogger.error("build", ATTRIBUTE_NOT_AVAILABLE, "Environment variable not found",
ExtraData="PATH")
GlobalData.gWorkspace = WorkspaceDir
GlobalData.gEfiSource = EfiSourceDir
GlobalData.gEdkSource = EdkSourceDir
GlobalData.gEcpSource = EcpSourceDir
GlobalData.gGlobalDefines["WORKSPACE"] = WorkspaceDir
GlobalData.gGlobalDefines["EFI_SOURCE"] = EfiSourceDir
GlobalData.gGlobalDefines["EDK_SOURCE"] = EdkSourceDir
GlobalData.gGlobalDefines["ECP_SOURCE"] = EcpSourceDir
GlobalData.gGlobalDefines["EDK_TOOLS_PATH"] = os.environ["EDK_TOOLS_PATH"]
## Get normalized file path
#
# Convert the path to be local format, and remove the WORKSPACE path at the
# beginning if the file path is given in full path.
#
# @param FilePath File path to be normalized
# @param Workspace Workspace path which the FilePath will be checked against
#
# @retval string The normalized file path
#
def NormFile(FilePath, Workspace):
# check if the path is absolute or relative
if os.path.isabs(FilePath):
FileFullPath = os.path.normpath(FilePath)
else:
FileFullPath = os.path.normpath(os.path.join(Workspace, FilePath))
# check if the file path exists or not
if not os.path.isfile(FileFullPath):
EdkLogger.error("build", FILE_NOT_FOUND, ExtraData="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath)
# remove workspace directory from the beginning part of the file path
if Workspace[-1] in ["\\", "/"]:
return FileFullPath[len(Workspace):]
else:
return FileFullPath[(len(Workspace) + 1):]
## Get the output of an external program
#
# This is the entrance method of thread reading output of an external program and
# putting them in STDOUT/STDERR of current program.
#
# @param From The stream message read from
# @param To The stream message put on
# @param ExitFlag The flag used to indicate stopping reading
#
def ReadMessage(From, To, ExitFlag):
while True:
# read one line a time
Line = From.readline()
# empty string means "end"
if Line != None and Line != "":
To(Line.rstrip())
else:
break
if ExitFlag.isSet():
break
## Launch an external program
#
# This method will call subprocess.Popen to execute an external program with
# given options in specified directory. Because of the dead-lock issue during
# redirecting output of the external program, threads are used to to do the
# redirection work.
#
# @param Command A list or string containing the call of the program
# @param WorkingDir The directory in which the program will be running
#
def LaunchCommand(Command, WorkingDir):
# if working directory doesn't exist, Popen() will raise an exception
if not os.path.isdir(WorkingDir):
EdkLogger.error("build", FILE_NOT_FOUND, ExtraData=WorkingDir)
Proc = None
EndOfProcedure = None
try:
# launch the command
Proc = Popen(Command, stdout=PIPE, stderr=PIPE, env=os.environ, cwd=WorkingDir, bufsize=-1)
# launch two threads to read the STDOUT and STDERR
EndOfProcedure = Event()
EndOfProcedure.clear()
if Proc.stdout:
StdOutThread = Thread(target=ReadMessage, args=(Proc.stdout, EdkLogger.info, EndOfProcedure))
StdOutThread.setName("STDOUT-Redirector")
StdOutThread.setDaemon(False)
StdOutThread.start()
if Proc.stderr:
StdErrThread = Thread(target=ReadMessage, args=(Proc.stderr, EdkLogger.quiet, EndOfProcedure))
StdErrThread.setName("STDERR-Redirector")
StdErrThread.setDaemon(False)
StdErrThread.start()
# waiting for program exit
Proc.wait()
except: # in case of aborting
# terminate the threads redirecting the program output
if EndOfProcedure != None:
EndOfProcedure.set()
if Proc == None:
if type(Command) != type(""):
Command = " ".join(Command)
EdkLogger.error("build", COMMAND_FAILURE, "Failed to start command", ExtraData="%s [%s]" % (Command, WorkingDir))
if Proc.stdout:
StdOutThread.join()
if Proc.stderr:
StdErrThread.join()
# check the return code of the program
if Proc.returncode != 0:
if type(Command) != type(""):
Command = " ".join(Command)
EdkLogger.error("build", COMMAND_FAILURE, ExtraData="%s [%s]" % (Command, WorkingDir))
## The smallest unit that can be built in multi-thread build mode
#
# This is the base class of build unit. The "Obj" parameter must provide
# __str__(), __eq__() and __hash__() methods. Otherwise there could be build units
# missing build.
#
# Currently the "Obj" should be only ModuleAutoGen or PlatformAutoGen objects.
#
class BuildUnit:
## The constructor
#
# @param self The object pointer
# @param Obj The object the build is working on
# @param Target The build target name, one of gSupportedTarget
# @param Dependency The BuildUnit(s) which must be completed in advance
# @param WorkingDir The directory build command starts in
#
def __init__(self, Obj, BuildCommand, Target, Dependency, WorkingDir="."):
self.BuildObject = Obj
self.Dependency = Dependency
self.WorkingDir = WorkingDir
self.Target = Target
self.BuildCommand = BuildCommand
if not BuildCommand:
EdkLogger.error("build", OPTION_MISSING,
"No build command found for this module. "
"Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
(Obj.BuildTarget, Obj.ToolChain, Obj.Arch),
ExtraData=str(Obj))
## str() method
#
# It just returns the string representation of self.BuildObject
#
# @param self The object pointer
#
def __str__(self):
return str(self.BuildObject)
## "==" operator method
#
# It just compares self.BuildObject with "Other". So self.BuildObject must
# provide its own __eq__() method.
#
# @param self The object pointer
# @param Other The other BuildUnit object compared to
#
def __eq__(self, Other):
return Other != None and self.BuildObject == Other.BuildObject \
and self.BuildObject.Arch == Other.BuildObject.Arch
## hash() method
#
# It just returns the hash value of self.BuildObject which must be hashable.
#
# @param self The object pointer
#
def __hash__(self):
return hash(self.BuildObject) + hash(self.BuildObject.Arch)
def __repr__(self):
return repr(self.BuildObject)
## The smallest module unit that can be built by nmake/make command in multi-thread build mode
#
# This class is for module build by nmake/make build system. The "Obj" parameter
# must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
# be make units missing build.
#
# Currently the "Obj" should be only ModuleAutoGen object.
#
class ModuleMakeUnit(BuildUnit):
## The constructor
#
# @param self The object pointer
# @param Obj The ModuleAutoGen object the build is working on
# @param Target The build target name, one of gSupportedTarget
#
def __init__(self, Obj, Target):
Dependency = [ModuleMakeUnit(La, Target) for La in Obj.LibraryAutoGenList]
BuildUnit.__init__(self, Obj, Obj.BuildCommand, Target, Dependency, Obj.MakeFileDir)
if Target in [None, "", "all"]:
self.Target = "tbuild"
## The smallest platform unit that can be built by nmake/make command in multi-thread build mode
#
# This class is for platform build by nmake/make build system. The "Obj" parameter
# must provide __str__(), __eq__() and __hash__() methods. Otherwise there could
# be make units missing build.
#
# Currently the "Obj" should be only PlatformAutoGen object.
#
class PlatformMakeUnit(BuildUnit):
## The constructor
#
# @param self The object pointer
# @param Obj The PlatformAutoGen object the build is working on
# @param Target The build target name, one of gSupportedTarget
#
def __init__(self, Obj, Target):
Dependency = [ModuleMakeUnit(Lib, Target) for Lib in self.BuildObject.LibraryAutoGenList]
Dependency.extend([ModuleMakeUnit(Mod, Target) for Mod in self.BuildObject.ModuleAutoGenList])
BuildUnit.__init__(self, Obj, Obj.BuildCommand, Target, Dependency, Obj.MakeFileDir)
## The class representing the task of a module build or platform build
#
# This class manages the build tasks in multi-thread build mode. Its jobs include
# scheduling thread running, catching thread error, monitor the thread status, etc.
#
class BuildTask:
# queue for tasks waiting for schedule
_PendingQueue = sdict()
_PendingQueueLock = threading.Lock()
# queue for tasks ready for running
_ReadyQueue = sdict()
_ReadyQueueLock = threading.Lock()
# queue for run tasks
_RunningQueue = sdict()
_RunningQueueLock = threading.Lock()
# queue containing all build tasks, in case duplicate build
_TaskQueue = sdict()
# flag indicating error occurs in a running thread
_ErrorFlag = threading.Event()
_ErrorFlag.clear()
_ErrorMessage = ""
# BoundedSemaphore object used to control the number of running threads
_Thread = None
# flag indicating if the scheduler is started or not
_SchedulerStopped = threading.Event()
_SchedulerStopped.set()
## Start the task scheduler thread
#
# @param MaxThreadNumber The maximum thread number
# @param ExitFlag Flag used to end the scheduler
#
@staticmethod
def StartScheduler(MaxThreadNumber, ExitFlag):
SchedulerThread = Thread(target=BuildTask.Scheduler, args=(MaxThreadNumber, ExitFlag))
SchedulerThread.setName("Build-Task-Scheduler")
SchedulerThread.setDaemon(False)
SchedulerThread.start()
# wait for the scheduler to be started, especially useful in Linux
while not BuildTask.IsOnGoing():
time.sleep(0.01)
## Scheduler method
#
# @param MaxThreadNumber The maximum thread number
# @param ExitFlag Flag used to end the scheduler
#
@staticmethod
def Scheduler(MaxThreadNumber, ExitFlag):
BuildTask._SchedulerStopped.clear()
try:
# use BoundedSemaphore to control the maximum running threads
BuildTask._Thread = BoundedSemaphore(MaxThreadNumber)
#
# scheduling loop, which will exits when no pending/ready task and
# indicated to do so, or there's error in running thread
#
while (len(BuildTask._PendingQueue) > 0 or len(BuildTask._ReadyQueue) > 0 \
or not ExitFlag.isSet()) and not BuildTask._ErrorFlag.isSet():
EdkLogger.debug(EdkLogger.DEBUG_8, "Pending Queue (%d), Ready Queue (%d)"
% (len(BuildTask._PendingQueue), len(BuildTask._ReadyQueue)))
# get all pending tasks
BuildTask._PendingQueueLock.acquire()
BuildObjectList = BuildTask._PendingQueue.keys()
#
# check if their dependency is resolved, and if true, move them
# into ready queue
#
for BuildObject in BuildObjectList:
Bt = BuildTask._PendingQueue[BuildObject]
if Bt.IsReady():
BuildTask._ReadyQueue[BuildObject] = BuildTask._PendingQueue.pop(BuildObject)
BuildTask._PendingQueueLock.release()
# launch build thread until the maximum number of threads is reached
while not BuildTask._ErrorFlag.isSet():
# empty ready queue, do nothing further
if len(BuildTask._ReadyQueue) == 0:
break
# wait for active thread(s) exit
BuildTask._Thread.acquire(True)
# start a new build thread
Bo = BuildTask._ReadyQueue.keys()[0]
Bt = BuildTask._ReadyQueue.pop(Bo)
# move into running queue
BuildTask._RunningQueueLock.acquire()
BuildTask._RunningQueue[Bo] = Bt
BuildTask._RunningQueueLock.release()
Bt.Start()
# avoid tense loop
time.sleep(0.01)
# avoid tense loop
time.sleep(0.01)
# wait for all running threads exit
if BuildTask._ErrorFlag.isSet():
EdkLogger.quiet("\nWaiting for all build threads exit...")
# while not BuildTask._ErrorFlag.isSet() and \
while len(BuildTask._RunningQueue) > 0:
EdkLogger.verbose("Waiting for thread ending...(%d)" % len(BuildTask._RunningQueue))
EdkLogger.debug(EdkLogger.DEBUG_8, "Threads [%s]" % ", ".join([Th.getName() for Th in threading.enumerate()]))
# avoid tense loop
time.sleep(0.1)
except BaseException, X:
#
# TRICK: hide the output of threads left runing, so that the user can
# catch the error message easily
#
EdkLogger.SetLevel(EdkLogger.ERROR)
BuildTask._ErrorFlag.set()
BuildTask._ErrorMessage = "build thread scheduler error\n\t%s" % str(X)
BuildTask._PendingQueue.clear()
BuildTask._ReadyQueue.clear()
BuildTask._RunningQueue.clear()
BuildTask._TaskQueue.clear()
BuildTask._SchedulerStopped.set()
## Wait for all running method exit
#
@staticmethod
def WaitForComplete():
BuildTask._SchedulerStopped.wait()
## Check if the scheduler is running or not
#
@staticmethod
def IsOnGoing():
return not BuildTask._SchedulerStopped.isSet()
## Abort the build
@staticmethod
def Abort():
if BuildTask.IsOnGoing():
BuildTask._ErrorFlag.set()
BuildTask.WaitForComplete()
## Check if there's error in running thread
#
# Since the main thread cannot catch exceptions in other thread, we have to
# use threading.Event to communicate this formation to main thread.
#
@staticmethod
def HasError():
return BuildTask._ErrorFlag.isSet()
## Get error message in running thread
#
# Since the main thread cannot catch exceptions in other thread, we have to
# use a static variable to communicate this message to main thread.
#
@staticmethod
def GetErrorMessage():
return BuildTask._ErrorMessage
## Factory method to create a BuildTask object
#
# This method will check if a module is building or has been built. And if
# true, just return the associated BuildTask object in the _TaskQueue. If
# not, create and return a new BuildTask object. The new BuildTask object
# will be appended to the _PendingQueue for scheduling later.
#
# @param BuildItem A BuildUnit object representing a build object
# @param Dependency The dependent build object of BuildItem
#
@staticmethod
def New(BuildItem, Dependency=None):
if BuildItem in BuildTask._TaskQueue:
Bt = BuildTask._TaskQueue[BuildItem]
return Bt
Bt = BuildTask()
Bt._Init(BuildItem, Dependency)
BuildTask._TaskQueue[BuildItem] = Bt
BuildTask._PendingQueueLock.acquire()
BuildTask._PendingQueue[BuildItem] = Bt
BuildTask._PendingQueueLock.release()
return Bt
## The real constructor of BuildTask
#
# @param BuildItem A BuildUnit object representing a build object
# @param Dependency The dependent build object of BuildItem
#
def _Init(self, BuildItem, Dependency=None):
self.BuildItem = BuildItem
self.DependencyList = []
if Dependency == None:
Dependency = BuildItem.Dependency
else:
Dependency.extend(BuildItem.Dependency)
self.AddDependency(Dependency)
# flag indicating build completes, used to avoid unnecessary re-build
self.CompleteFlag = False
## Check if all dependent build tasks are completed or not
#
def IsReady(self):
ReadyFlag = True
for Dep in self.DependencyList:
if Dep.CompleteFlag == True:
continue
ReadyFlag = False
break
return ReadyFlag
## Add dependent build task
#
# @param Dependency The list of dependent build objects
#
def AddDependency(self, Dependency):
for Dep in Dependency:
self.DependencyList.append(BuildTask.New(Dep)) # BuildTask list
## The thread wrapper of LaunchCommand function
#
# @param Command A list or string contains the call of the command
# @param WorkingDir The directory in which the program will be running
#
def _CommandThread(self, Command, WorkingDir):
try:
LaunchCommand(Command, WorkingDir)
self.CompleteFlag = True
except:
#
# TRICK: hide the output of threads left runing, so that the user can
# catch the error message easily
#
if not BuildTask._ErrorFlag.isSet():
GlobalData.gBuildingModule = "%s [%s, %s, %s]" % (str(self.BuildItem.BuildObject),
self.BuildItem.BuildObject.Arch,
self.BuildItem.BuildObject.ToolChain,
self.BuildItem.BuildObject.BuildTarget
)
EdkLogger.SetLevel(EdkLogger.ERROR)
BuildTask._ErrorFlag.set()
BuildTask._ErrorMessage = "%s broken\n %s [%s]" % \
(threading.currentThread().getName(), Command, WorkingDir)
# indicate there's a thread is available for another build task
BuildTask._RunningQueueLock.acquire()
BuildTask._RunningQueue.pop(self.BuildItem)
BuildTask._RunningQueueLock.release()
BuildTask._Thread.release()
## Start build task thread
#
def Start(self):
EdkLogger.quiet("Building ... %s" % repr(self.BuildItem))
Command = self.BuildItem.BuildCommand + [self.BuildItem.Target]
self.BuildTread = Thread(target=self._CommandThread, args=(Command, self.BuildItem.WorkingDir))
self.BuildTread.setName("build thread")
self.BuildTread.setDaemon(False)
self.BuildTread.start()
## The class contains the information related to EFI image
#
class PeImageInfo():
## Constructor
#
# Constructor will load all required image information.
#
# @param BaseName The full file path of image.
# @param Guid The GUID for image.
# @param Arch Arch of this image.
# @param OutputDir The output directory for image.
# @param DebugDir The debug directory for image.
# @param ImageClass PeImage Information
#
def __init__(self, BaseName, Guid, Arch, OutputDir, DebugDir, ImageClass):
self.BaseName = BaseName
self.Guid = Guid
self.Arch = Arch
self.OutputDir = OutputDir
self.DebugDir = DebugDir
self.Image = ImageClass
self.Image.Size = (self.Image.Size / 0x1000 + 1) * 0x1000
## The class implementing the EDK2 build process
#
# The build process includes:
# 1. Load configuration from target.txt and tools_def.txt in $(WORKSPACE)/Conf
# 2. Parse DSC file of active platform
# 3. Parse FDF file if any
# 4. Establish build database, including parse all other files (module, package)
# 5. Create AutoGen files (C code file, depex file, makefile) if necessary
# 6. Call build command
#
class Build():
## Constructor
#
# Constructor will load all necessary configurations, parse platform, modules
# and packages and the establish a database for AutoGen.
#
# @param Target The build command target, one of gSupportedTarget
# @param WorkspaceDir The directory of workspace
# @param BuildOptions Build options passed from command line
#
def __init__(self, Target, WorkspaceDir, BuildOptions):
self.WorkspaceDir = WorkspaceDir
self.Target = Target
self.PlatformFile = BuildOptions.PlatformFile
self.ModuleFile = BuildOptions.ModuleFile
self.ArchList = BuildOptions.TargetArch
self.ToolChainList = BuildOptions.ToolChain
self.BuildTargetList= BuildOptions.BuildTarget
self.Fdf = BuildOptions.FdfFile
self.FdList = BuildOptions.RomImage
self.FvList = BuildOptions.FvImage
self.CapList = BuildOptions.CapName
self.SilentMode = BuildOptions.SilentMode
self.ThreadNumber = BuildOptions.ThreadNumber
self.SkipAutoGen = BuildOptions.SkipAutoGen
self.Reparse = BuildOptions.Reparse
self.SkuId = BuildOptions.SkuId
self.SpawnMode = True
self.BuildReport = BuildReport(BuildOptions.ReportFile, BuildOptions.ReportType)
self.TargetTxt = TargetTxtClassObject()
self.ToolDef = ToolDefClassObject()
if BuildOptions.DisableCache:
self.Db = WorkspaceDatabase(":memory:")
else:
self.Db = WorkspaceDatabase(None, self.Reparse)
self.BuildDatabase = self.Db.BuildObject
self.Platform = None
self.LoadFixAddress = 0
self.UniFlag = BuildOptions.Flag
# print dot character during doing some time-consuming work
self.Progress = Utils.Progressor()
self.InitBuild()
# print current build environment and configuration
EdkLogger.quiet("%-16s = %s" % ("WORKSPACE", os.environ["WORKSPACE"]))
EdkLogger.quiet("%-16s = %s" % ("ECP_SOURCE", os.environ["ECP_SOURCE"]))
EdkLogger.quiet("%-16s = %s" % ("EDK_SOURCE", os.environ["EDK_SOURCE"]))
EdkLogger.quiet("%-16s = %s" % ("EFI_SOURCE", os.environ["EFI_SOURCE"]))
EdkLogger.quiet("%-16s = %s" % ("EDK_TOOLS_PATH", os.environ["EDK_TOOLS_PATH"]))
EdkLogger.info("")
os.chdir(self.WorkspaceDir)
## Load configuration
#
# This method will parse target.txt and get the build configurations.
#
def LoadConfiguration(self):
#
# Check target.txt and tools_def.txt and Init them
#
BuildConfigurationFile = os.path.normpath(os.path.join(self.WorkspaceDir, gBuildConfiguration))
if os.path.isfile(BuildConfigurationFile) == True:
StatusCode = self.TargetTxt.LoadTargetTxtFile(BuildConfigurationFile)
ToolDefinitionFile = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
if ToolDefinitionFile == '':
ToolDefinitionFile = gToolsDefinition
ToolDefinitionFile = os.path.normpath(os.path.join(self.WorkspaceDir, ToolDefinitionFile))
if os.path.isfile(ToolDefinitionFile) == True:
StatusCode = self.ToolDef.LoadToolDefFile(ToolDefinitionFile)
else:
EdkLogger.error("build", FILE_NOT_FOUND, ExtraData=ToolDefinitionFile)
else:
EdkLogger.error("build", FILE_NOT_FOUND, ExtraData=BuildConfigurationFile)
# if no ARCH given in command line, get it from target.txt
if not self.ArchList:
self.ArchList = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TARGET_ARCH]
self.ArchList = tuple(self.ArchList)
# if no build target given in command line, get it from target.txt
if not self.BuildTargetList:
self.BuildTargetList = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TARGET]
# if no tool chain given in command line, get it from target.txt
if not self.ToolChainList:
self.ToolChainList = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_TAG]
if self.ToolChainList == None or len(self.ToolChainList) == 0:
EdkLogger.error("build", RESOURCE_NOT_AVAILABLE, ExtraData="No toolchain given. Don't know how to build.\n")
# check if the tool chains are defined or not
NewToolChainList = []
for ToolChain in self.ToolChainList:
if ToolChain not in self.ToolDef.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TOOL_CHAIN_TAG]:
EdkLogger.warn("build", "Tool chain [%s] is not defined" % ToolChain)
else:
NewToolChainList.append(ToolChain)
# if no tool chain available, break the build
if len(NewToolChainList) == 0:
EdkLogger.error("build", RESOURCE_NOT_AVAILABLE,
ExtraData="[%s] not defined. No toolchain available for build!\n" % ", ".join(self.ToolChainList))
else:
self.ToolChainList = NewToolChainList
if self.ThreadNumber == None:
self.ThreadNumber = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_MAX_CONCURRENT_THREAD_NUMBER]
if self.ThreadNumber == '':
self.ThreadNumber = 0
else:
self.ThreadNumber = int(self.ThreadNumber, 0)
if self.ThreadNumber == 0:
self.ThreadNumber = 1
if not self.PlatformFile:
PlatformFile = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_ACTIVE_PLATFORM]
if not PlatformFile:
# Try to find one in current directory
WorkingDirectory = os.getcwd()
FileList = glob.glob(os.path.normpath(os.path.join(WorkingDirectory, '*.dsc')))
FileNum = len(FileList)
if FileNum >= 2:
EdkLogger.error("build", OPTION_MISSING,
ExtraData="There are %d DSC files in %s. Use '-p' to specify one.\n" % (FileNum, WorkingDirectory))
elif FileNum == 1:
PlatformFile = FileList[0]
else:
EdkLogger.error("build", RESOURCE_NOT_AVAILABLE,
ExtraData="No active platform specified in target.txt or command line! Nothing can be built.\n")
self.PlatformFile = PathClass(NormFile(PlatformFile, self.WorkspaceDir), self.WorkspaceDir)
## Initialize build configuration
#
# This method will parse DSC file and merge the configurations from
# command line and target.txt, then get the final build configurations.
#
def InitBuild(self):
# parse target.txt, tools_def.txt, and platform file
self.LoadConfiguration()
# Allow case-insensitive for those from command line or configuration file
ErrorCode, ErrorInfo = self.PlatformFile.Validate(".dsc", False)
if ErrorCode != 0:
EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)
# create metafile database
self.Db.InitDatabase()
## Build a module or platform
#
# Create autogen code and makefile for a module or platform, and the launch
# "make" command to build it
#
# @param Target The target of build command
# @param Platform The platform file
# @param Module The module file
# @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"
# @param ToolChain The name of toolchain to build
# @param Arch The arch of the module/platform
# @param CreateDepModuleCodeFile Flag used to indicate creating code
# for dependent modules/Libraries
# @param CreateDepModuleMakeFile Flag used to indicate creating makefile
# for dependent modules/Libraries
#
def _BuildPa(self, Target, AutoGenObject, CreateDepsCodeFile=True, CreateDepsMakeFile=True, BuildModule=False):
if AutoGenObject == None:
return False
# skip file generation for cleanxxx targets, run and fds target
if Target not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
# for target which must generate AutoGen code and makefile
if not self.SkipAutoGen or Target == 'genc':
self.Progress.Start("Generating code")
AutoGenObject.CreateCodeFile(CreateDepsCodeFile)
self.Progress.Stop("done!")
if Target == "genc":
return True
if not self.SkipAutoGen or Target == 'genmake':
self.Progress.Start("Generating makefile")
AutoGenObject.CreateMakeFile(CreateDepsMakeFile)
self.Progress.Stop("done!")
if Target == "genmake":
return True
else:
# always recreate top/platform makefile when clean, just in case of inconsistency
AutoGenObject.CreateCodeFile(False)
AutoGenObject.CreateMakeFile(False)
if EdkLogger.GetLevel() == EdkLogger.QUIET:
EdkLogger.quiet("Building ... %s" % repr(AutoGenObject))
BuildCommand = AutoGenObject.BuildCommand
if BuildCommand == None or len(BuildCommand) == 0:
EdkLogger.error("build", OPTION_MISSING,
"No build command found for this module. "
"Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
(AutoGenObject.BuildTarget, AutoGenObject.ToolChain, AutoGenObject.Arch),
ExtraData=str(AutoGenObject))
makefile = GenMake.BuildFile(AutoGenObject)._FILE_NAME_[GenMake.gMakeType]
# genfds
if Target == 'fds':
LaunchCommand(AutoGenObject.GenFdsCommand, AutoGenObject.MakeFileDir)
return True
# run
if Target == 'run':
RunDir = os.path.normpath(os.path.join(AutoGenObject.BuildDir, 'IA32'))
Command = '.\SecMain'
os.chdir(RunDir)
LaunchCommand(Command, RunDir)
return True
# build modules
if BuildModule:
BuildCommand = BuildCommand + [Target]
LaunchCommand(BuildCommand, AutoGenObject.MakeFileDir)
self.CreateAsBuiltInf()
return True
# build library
if Target == 'libraries':
for Lib in AutoGenObject.LibraryBuildDirectoryList:
NewBuildCommand = BuildCommand + ['-f', os.path.normpath(os.path.join(Lib, makefile)), 'pbuild']
LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)
return True
# build module
if Target == 'modules':
for Lib in AutoGenObject.LibraryBuildDirectoryList:
NewBuildCommand = BuildCommand + ['-f', os.path.normpath(os.path.join(Lib, makefile)), 'pbuild']
LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)
for Mod in AutoGenObject.ModuleBuildDirectoryList:
NewBuildCommand = BuildCommand + ['-f', os.path.normpath(os.path.join(Mod, makefile)), 'pbuild']
LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)
self.CreateAsBuiltInf()
return True
# cleanlib
if Target == 'cleanlib':
for Lib in AutoGenObject.LibraryBuildDirectoryList:
LibMakefile = os.path.normpath(os.path.join(Lib, makefile))
if os.path.exists(LibMakefile):
NewBuildCommand = BuildCommand + ['-f', LibMakefile, 'cleanall']
LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)
return True
# clean
if Target == 'clean':
for Mod in AutoGenObject.ModuleBuildDirectoryList:
ModMakefile = os.path.normpath(os.path.join(Mod, makefile))
if os.path.exists(ModMakefile):
NewBuildCommand = BuildCommand + ['-f', ModMakefile, 'cleanall']
LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)
for Lib in AutoGenObject.LibraryBuildDirectoryList:
LibMakefile = os.path.normpath(os.path.join(Lib, makefile))
if os.path.exists(LibMakefile):
NewBuildCommand = BuildCommand + ['-f', LibMakefile, 'cleanall']
LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)
return True
# cleanall
if Target == 'cleanall':
try:
#os.rmdir(AutoGenObject.BuildDir)
RemoveDirectory(AutoGenObject.BuildDir, True)
#
# First should close DB.
#
self.Db.Close()
RemoveDirectory(os.path.dirname(GlobalData.gDatabasePath), True)
except WindowsError, X:
EdkLogger.error("build", FILE_DELETE_FAILURE, ExtraData=str(X))
return True
## Build a module or platform
#
# Create autogen code and makefile for a module or platform, and the launch
# "make" command to build it
#
# @param Target The target of build command
# @param Platform The platform file
# @param Module The module file
# @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"
# @param ToolChain The name of toolchain to build
# @param Arch The arch of the module/platform
# @param CreateDepModuleCodeFile Flag used to indicate creating code
# for dependent modules/Libraries
# @param CreateDepModuleMakeFile Flag used to indicate creating makefile
# for dependent modules/Libraries
#
def _Build(self, Target, AutoGenObject, CreateDepsCodeFile=True, CreateDepsMakeFile=True, BuildModule=False):
if AutoGenObject == None:
return False
# skip file generation for cleanxxx targets, run and fds target
if Target not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
# for target which must generate AutoGen code and makefile
if not self.SkipAutoGen or Target == 'genc':
self.Progress.Start("Generating code")
AutoGenObject.CreateCodeFile(CreateDepsCodeFile)
self.Progress.Stop("done!")
if Target == "genc":
return True
if not self.SkipAutoGen or Target == 'genmake':
self.Progress.Start("Generating makefile")
AutoGenObject.CreateMakeFile(CreateDepsMakeFile)
#AutoGenObject.CreateAsBuiltInf()
self.Progress.Stop("done!")
if Target == "genmake":
return True
else:
# always recreate top/platform makefile when clean, just in case of inconsistency
AutoGenObject.CreateCodeFile(False)
AutoGenObject.CreateMakeFile(False)
if EdkLogger.GetLevel() == EdkLogger.QUIET:
EdkLogger.quiet("Building ... %s" % repr(AutoGenObject))
BuildCommand = AutoGenObject.BuildCommand
if BuildCommand == None or len(BuildCommand) == 0:
EdkLogger.error("build", OPTION_MISSING,
"No build command found for this module. "
"Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
(AutoGenObject.BuildTarget, AutoGenObject.ToolChain, AutoGenObject.Arch),
ExtraData=str(AutoGenObject))
# genfds
if Target == 'fds':
LaunchCommand(AutoGenObject.GenFdsCommand, AutoGenObject.MakeFileDir)
return True
# run
if Target == 'run':
RunDir = os.path.normpath(os.path.join(AutoGenObject.BuildDir, 'IA32'))
Command = '.\SecMain'
os.chdir(RunDir)
LaunchCommand(Command, RunDir)
return True
# build modules
BuildCommand = BuildCommand + [Target]
if BuildModule:
LaunchCommand(BuildCommand, AutoGenObject.MakeFileDir)
self.CreateAsBuiltInf()
return True
# build library
if Target == 'libraries':
pass
# not build modules
# cleanall
if Target == 'cleanall':
try:
#os.rmdir(AutoGenObject.BuildDir)
RemoveDirectory(AutoGenObject.BuildDir, True)
#
# First should close DB.
#
self.Db.Close()
RemoveDirectory(gBuildCacheDir, True)
except WindowsError, X:
EdkLogger.error("build", FILE_DELETE_FAILURE, ExtraData=str(X))
return True
## Rebase module image and Get function address for the input module list.
#
def _RebaseModule (self, MapBuffer, BaseAddress, ModuleList, AddrIsOffset = True, ModeIsSmm = False):
if ModeIsSmm:
AddrIsOffset = False
InfFileNameList = ModuleList.keys()
#InfFileNameList.sort()
for InfFile in InfFileNameList:
sys.stdout.write (".")
sys.stdout.flush()
ModuleInfo = ModuleList[InfFile]
ModuleName = ModuleInfo.BaseName
ModuleOutputImage = ModuleInfo.Image.FileName
ModuleDebugImage = os.path.join(ModuleInfo.DebugDir, ModuleInfo.BaseName + '.efi')
## for SMM module in SMRAM, the SMRAM will be allocated from base to top.
if not ModeIsSmm:
BaseAddress = BaseAddress - ModuleInfo.Image.Size
#
# Update Image to new BaseAddress by GenFw tool
#
LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleOutputImage], ModuleInfo.OutputDir)
LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)
else:
#
# Set new address to the section header only for SMM driver.
#
LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleOutputImage], ModuleInfo.OutputDir)
LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)
#
# Collect funtion address from Map file
#
ImageMapTable = ModuleOutputImage.replace('.efi', '.map')
FunctionList = []
if os.path.exists(ImageMapTable):
OrigImageBaseAddress = 0
ImageMap = open (ImageMapTable, 'r')
for LinStr in ImageMap:
if len (LinStr.strip()) == 0:
continue
#
# Get the preferred address set on link time.
#
if LinStr.find ('Preferred load address is') != -1:
StrList = LinStr.split()
OrigImageBaseAddress = int (StrList[len(StrList) - 1], 16)
StrList = LinStr.split()
if len (StrList) > 4:
if StrList[3] == 'f' or StrList[3] =='F':
Name = StrList[1]
RelativeAddress = int (StrList[2], 16) - OrigImageBaseAddress
FunctionList.append ((Name, RelativeAddress))
if ModuleInfo.Arch == 'IPF' and Name.endswith('_ModuleEntryPoint'):
#
# Get the real entry point address for IPF image.
#
ModuleInfo.Image.EntryPoint = RelativeAddress
ImageMap.close()
#
# Add general information.
#
if ModeIsSmm:
MapBuffer.write('\n\n%s (Fixed SMRAM Offset, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName, BaseAddress, BaseAddress + ModuleInfo.Image.EntryPoint))
elif AddrIsOffset:
MapBuffer.write('\n\n%s (Fixed Memory Offset, BaseAddress=-0x%010X, EntryPoint=-0x%010X)\n' % (ModuleName, 0 - BaseAddress, 0 - (BaseAddress + ModuleInfo.Image.EntryPoint)))
else:
MapBuffer.write('\n\n%s (Fixed Memory Address, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName, BaseAddress, BaseAddress + ModuleInfo.Image.EntryPoint))
#
# Add guid and general seciton section.
#
TextSectionAddress = 0
DataSectionAddress = 0
for SectionHeader in ModuleInfo.Image.SectionHeaderList:
if SectionHeader[0] == '.text':
TextSectionAddress = SectionHeader[1]
elif SectionHeader[0] in ['.data', '.sdata']:
DataSectionAddress = SectionHeader[1]
if AddrIsOffset:
MapBuffer.write('(GUID=%s, .textbaseaddress=-0x%010X, .databaseaddress=-0x%010X)\n' % (ModuleInfo.Guid, 0 - (BaseAddress + TextSectionAddress), 0 - (BaseAddress + DataSectionAddress)))
else:
MapBuffer.write('(GUID=%s, .textbaseaddress=0x%010X, .databaseaddress=0x%010X)\n' % (ModuleInfo.Guid, BaseAddress + TextSectionAddress, BaseAddress + DataSectionAddress))
#
# Add debug image full path.
#
MapBuffer.write('(IMAGE=%s)\n\n' % (ModuleDebugImage))
#
# Add funtion address
#
for Function in FunctionList:
if AddrIsOffset:
MapBuffer.write(' -0x%010X %s\n' % (0 - (BaseAddress + Function[1]), Function[0]))
else:
MapBuffer.write(' 0x%010X %s\n' % (BaseAddress + Function[1], Function[0]))
ImageMap.close()
#
# for SMM module in SMRAM, the SMRAM will be allocated from base to top.
#
if ModeIsSmm:
BaseAddress = BaseAddress + ModuleInfo.Image.Size
## Collect MAP information of all FVs
#
def _CollectFvMapBuffer (self, MapBuffer, Wa, ModuleList):
if self.Fdf:
# First get the XIP base address for FV map file.
GuidPattern = re.compile("[-a-fA-F0-9]+")
GuidName = re.compile("\(GUID=[-a-fA-F0-9]+")
for FvName in Wa.FdfProfile.FvDict.keys():
FvMapBuffer = os.path.join(Wa.FvDir, FvName + '.Fv.map')
if not os.path.exists(FvMapBuffer):
continue
FvMap = open(FvMapBuffer, 'r')
#skip FV size information
FvMap.readline()
FvMap.readline()
FvMap.readline()
FvMap.readline()
for Line in FvMap:
MatchGuid = GuidPattern.match(Line)
if MatchGuid != None:
#
# Replace GUID with module name
#
GuidString = MatchGuid.group()
if GuidString.upper() in ModuleList:
Line = Line.replace(GuidString, ModuleList[GuidString.upper()].Name)
MapBuffer.write('%s' % (Line))
#
# Add the debug image full path.
#
MatchGuid = GuidName.match(Line)
if MatchGuid != None:
GuidString = MatchGuid.group().split("=")[1]
if GuidString.upper() in ModuleList:
MapBuffer.write('(IMAGE=%s)\n' % (os.path.join(ModuleList[GuidString.upper()].DebugDir, ModuleList[GuidString.upper()].Name + '.efi')))
FvMap.close()
## Collect MAP information of all modules
#
def _CollectModuleMapBuffer (self, MapBuffer, ModuleList):
sys.stdout.write ("Generate Load Module At Fix Address Map")
sys.stdout.flush()
PatchEfiImageList = []
PeiModuleList = {}
BtModuleList = {}
RtModuleList = {}
SmmModuleList = {}
PeiSize = 0
BtSize = 0
RtSize = 0
# reserve 4K size in SMRAM to make SMM module address not from 0.
SmmSize = 0x1000
IsIpfPlatform = False
if 'IPF' in self.ArchList:
IsIpfPlatform = True
for ModuleGuid in ModuleList:
Module = ModuleList[ModuleGuid]
GlobalData.gProcessingFile = "%s [%s, %s, %s]" % (Module.MetaFile, Module.Arch, Module.ToolChain, Module.BuildTarget)
OutputImageFile = ''
for ResultFile in Module.CodaTargetList:
if str(ResultFile.Target).endswith('.efi'):
#
# module list for PEI, DXE, RUNTIME and SMM
#
OutputImageFile = os.path.join(Module.OutputDir, Module.Name + '.efi')
ImageClass = PeImageClass (OutputImageFile)
if not ImageClass.IsValid:
EdkLogger.error("build", FILE_PARSE_FAILURE, ExtraData=ImageClass.ErrorInfo)
ImageInfo = PeImageInfo(Module.Name, Module.Guid, Module.Arch, Module.OutputDir, Module.DebugDir, ImageClass)
if Module.ModuleType in ['PEI_CORE', 'PEIM', 'COMBINED_PEIM_DRIVER','PIC_PEIM', 'RELOCATABLE_PEIM', 'DXE_CORE']:
PeiModuleList[Module.MetaFile] = ImageInfo
PeiSize += ImageInfo.Image.Size
elif Module.ModuleType in ['BS_DRIVER', 'DXE_DRIVER', 'UEFI_DRIVER']:
BtModuleList[Module.MetaFile] = ImageInfo
BtSize += ImageInfo.Image.Size
elif Module.ModuleType in ['DXE_RUNTIME_DRIVER', 'RT_DRIVER', 'DXE_SAL_DRIVER', 'SAL_RT_DRIVER']:
RtModuleList[Module.MetaFile] = ImageInfo
#IPF runtime driver needs to be at 2 page alignment.
if IsIpfPlatform and ImageInfo.Image.Size % 0x2000 != 0:
ImageInfo.Image.Size = (ImageInfo.Image.Size / 0x2000 + 1) * 0x2000
RtSize += ImageInfo.Image.Size
elif Module.ModuleType in ['SMM_CORE', 'DXE_SMM_DRIVER']:
SmmModuleList[Module.MetaFile] = ImageInfo
SmmSize += ImageInfo.Image.Size
if Module.ModuleType == 'DXE_SMM_DRIVER':
PiSpecVersion = '0x00000000'
if 'PI_SPECIFICATION_VERSION' in Module.Module.Specification:
PiSpecVersion = Module.Module.Specification['PI_SPECIFICATION_VERSION']
# for PI specification < PI1.1, DXE_SMM_DRIVER also runs as BOOT time driver.
if int(PiSpecVersion, 16) < 0x0001000A:
BtModuleList[Module.MetaFile] = ImageInfo
BtSize += ImageInfo.Image.Size
break
#
# EFI image is final target.
# Check EFI image contains patchable FixAddress related PCDs.
#
if OutputImageFile != '':
ModuleIsPatch = False
for Pcd in Module.ModulePcdList:
if Pcd.Type == TAB_PCDS_PATCHABLE_IN_MODULE and Pcd.TokenCName in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST:
ModuleIsPatch = True
break
if not ModuleIsPatch:
for Pcd in Module.LibraryPcdList:
if Pcd.Type == TAB_PCDS_PATCHABLE_IN_MODULE and Pcd.TokenCName in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST:
ModuleIsPatch = True
break
if not ModuleIsPatch:
continue
#
# Module includes the patchable load fix address PCDs.
# It will be fixed up later.
#
PatchEfiImageList.append (OutputImageFile)
#
# Get Top Memory address
#
ReservedRuntimeMemorySize = 0
TopMemoryAddress = 0
if self.LoadFixAddress == 0xFFFFFFFFFFFFFFFF:
TopMemoryAddress = 0
else:
TopMemoryAddress = self.LoadFixAddress
if TopMemoryAddress < RtSize + BtSize + PeiSize:
EdkLogger.error("build", PARAMETER_INVALID, "FIX_LOAD_TOP_MEMORY_ADDRESS is too low to load driver")
# Make IPF runtime driver at 2 page alignment.
if IsIpfPlatform:
ReservedRuntimeMemorySize = TopMemoryAddress % 0x2000
RtSize = RtSize + ReservedRuntimeMemorySize
#
# Patch FixAddress related PCDs into EFI image
#
for EfiImage in PatchEfiImageList:
EfiImageMap = EfiImage.replace('.efi', '.map')
if not os.path.exists(EfiImageMap):
continue
#
# Get PCD offset in EFI image by GenPatchPcdTable function
#
PcdTable = parsePcdInfoFromMapFile(EfiImageMap, EfiImage)
#
# Patch real PCD value by PatchPcdValue tool
#
for PcdInfo in PcdTable:
ReturnValue = 0
if PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE:
ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE, str (PeiSize/0x1000))
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE:
ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE, str (BtSize/0x1000))
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE:
ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE, str (RtSize/0x1000))
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE and len (SmmModuleList) > 0:
ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE, str (SmmSize/0x1000))
if ReturnValue != 0:
EdkLogger.error("build", PARAMETER_INVALID, "Patch PCD value failed", ExtraData=ErrorInfo)
MapBuffer.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize/0x1000))
MapBuffer.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize/0x1000))
MapBuffer.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize/0x1000))
if len (SmmModuleList) > 0:
MapBuffer.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize/0x1000))
PeiBaseAddr = TopMemoryAddress - RtSize - BtSize
BtBaseAddr = TopMemoryAddress - RtSize
RtBaseAddr = TopMemoryAddress - ReservedRuntimeMemorySize
self._RebaseModule (MapBuffer, PeiBaseAddr, PeiModuleList, TopMemoryAddress == 0)
self._RebaseModule (MapBuffer, BtBaseAddr, BtModuleList, TopMemoryAddress == 0)
self._RebaseModule (MapBuffer, RtBaseAddr, RtModuleList, TopMemoryAddress == 0)
self._RebaseModule (MapBuffer, 0x1000, SmmModuleList, AddrIsOffset = False, ModeIsSmm = True)
MapBuffer.write('\n\n')
sys.stdout.write ("\n")
sys.stdout.flush()
## Save platform Map file
#
def _SaveMapFile (self, MapBuffer, Wa):
#
# Map file path is got.
#
MapFilePath = os.path.join(Wa.BuildDir, Wa.Name + '.map')
#
# Save address map into MAP file.
#
SaveFileOnChange(MapFilePath, MapBuffer.getvalue(), False)
MapBuffer.close()
if self.LoadFixAddress != 0:
sys.stdout.write ("\nLoad Module At Fix Address Map file can be found at %s\n" %(MapFilePath))
sys.stdout.flush()
## Build active platform for different build targets and different tool chains
#
def _BuildPlatform(self):
for BuildTarget in self.BuildTargetList:
GlobalData.gGlobalDefines['TARGET'] = BuildTarget
for ToolChain in self.ToolChainList:
GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain
GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain
Wa = WorkspaceAutoGen(
self.WorkspaceDir,
self.PlatformFile,
BuildTarget,
ToolChain,
self.ArchList,
self.BuildDatabase,
self.TargetTxt,
self.ToolDef,
self.Fdf,
self.FdList,
self.FvList,
self.CapList,
self.SkuId,
self.UniFlag,
self.Progress
)
self.Fdf = Wa.FdfFile
self.LoadFixAddress = Wa.Platform.LoadFixAddress
self.BuildReport.AddPlatformReport(Wa)
self.Progress.Stop("done!")
for Arch in Wa.ArchList:
GlobalData.gGlobalDefines['ARCH'] = Arch
Pa = PlatformAutoGen(Wa, self.PlatformFile, BuildTarget, ToolChain, Arch)
for Module in Pa.Platform.Modules:
# Get ModuleAutoGen object to generate C code file and makefile
Ma = ModuleAutoGen(Wa, Module, BuildTarget, ToolChain, Arch, self.PlatformFile)
if Ma == None:
continue
self.BuildModules.append(Ma)
self._BuildPa(self.Target, Pa)
# Create MAP file when Load Fix Address is enabled.
if self.Target in ["", "all", "fds"]:
for Arch in Wa.ArchList:
GlobalData.gGlobalDefines['ARCH'] = Arch
#
# Check whether the set fix address is above 4G for 32bit image.
#
if (Arch == 'IA32' or Arch == 'ARM') and self.LoadFixAddress != 0xFFFFFFFFFFFFFFFF and self.LoadFixAddress >= 0x100000000:
EdkLogger.error("build", PARAMETER_INVALID, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platform with IA32 or ARM arch modules")
#
# Get Module List
#
ModuleList = {}
for Pa in Wa.AutoGenObjectList:
for Ma in Pa.ModuleAutoGenList:
if Ma == None:
continue
if not Ma.IsLibrary:
ModuleList[Ma.Guid.upper()] = Ma
MapBuffer = StringIO('')
if self.LoadFixAddress != 0:
#
# Rebase module to the preferred memory address before GenFds
#
self._CollectModuleMapBuffer(MapBuffer, ModuleList)
if self.Fdf:
#
# create FDS again for the updated EFI image
#
self._Build("fds", Wa)
if self.Fdf:
#
# Create MAP file for all platform FVs after GenFds.
#
self._CollectFvMapBuffer(MapBuffer, Wa, ModuleList)
#
# Save MAP buffer into MAP file.
#
self._SaveMapFile (MapBuffer, Wa)
## Build active module for different build targets, different tool chains and different archs
#
def _BuildModule(self):
for BuildTarget in self.BuildTargetList:
GlobalData.gGlobalDefines['TARGET'] = BuildTarget
for ToolChain in self.ToolChainList:
GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain
GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain
#
# module build needs platform build information, so get platform
# AutoGen first
#
Wa = WorkspaceAutoGen(
self.WorkspaceDir,
self.PlatformFile,
BuildTarget,
ToolChain,
self.ArchList,
self.BuildDatabase,
self.TargetTxt,
self.ToolDef,
self.Fdf,
self.FdList,
self.FvList,
self.CapList,
self.SkuId,
self.UniFlag,
self.Progress,
self.ModuleFile
)
self.Fdf = Wa.FdfFile
self.LoadFixAddress = Wa.Platform.LoadFixAddress
Wa.CreateMakeFile(False)
self.Progress.Stop("done!")
MaList = []
for Arch in Wa.ArchList:
GlobalData.gGlobalDefines['ARCH'] = Arch
Ma = ModuleAutoGen(Wa, self.ModuleFile, BuildTarget, ToolChain, Arch, self.PlatformFile)
if Ma == None: continue
MaList.append(Ma)
self.BuildModules.append(Ma)
if not Ma.IsBinaryModule:
self._Build(self.Target, Ma, BuildModule=True)
self.BuildReport.AddPlatformReport(Wa, MaList)
if MaList == []:
EdkLogger.error(
'build',
BUILD_ERROR,
"Module for [%s] is not a component of active platform."\
" Please make sure that the ARCH and inf file path are"\
" given in the same as in [%s]" %\
(', '.join(Wa.ArchList), self.PlatformFile),
ExtraData=self.ModuleFile
)
# Create MAP file when Load Fix Address is enabled.
if self.Target == "fds" and self.Fdf:
for Arch in Wa.ArchList:
#
# Check whether the set fix address is above 4G for 32bit image.
#
if (Arch == 'IA32' or Arch == 'ARM') and self.LoadFixAddress != 0xFFFFFFFFFFFFFFFF and self.LoadFixAddress >= 0x100000000:
EdkLogger.error("build", PARAMETER_INVALID, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
#
# Get Module List
#
ModuleList = {}
for Pa in Wa.AutoGenObjectList:
for Ma in Pa.ModuleAutoGenList:
if Ma == None:
continue
if not Ma.IsLibrary:
ModuleList[Ma.Guid.upper()] = Ma
MapBuffer = StringIO('')
if self.LoadFixAddress != 0:
#
# Rebase module to the preferred memory address before GenFds
#
self._CollectModuleMapBuffer(MapBuffer, ModuleList)
#
# create FDS again for the updated EFI image
#
self._Build("fds", Wa)
#
# Create MAP file for all platform FVs after GenFds.
#
self._CollectFvMapBuffer(MapBuffer, Wa, ModuleList)
#
# Save MAP buffer into MAP file.
#
self._SaveMapFile (MapBuffer, Wa)
## Build a platform in multi-thread mode
#
def _MultiThreadBuildPlatform(self):
for BuildTarget in self.BuildTargetList:
GlobalData.gGlobalDefines['TARGET'] = BuildTarget
for ToolChain in self.ToolChainList:
GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain
GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain
Wa = WorkspaceAutoGen(
self.WorkspaceDir,
self.PlatformFile,
BuildTarget,
ToolChain,
self.ArchList,
self.BuildDatabase,
self.TargetTxt,
self.ToolDef,
self.Fdf,
self.FdList,
self.FvList,
self.CapList,
self.SkuId,
self.UniFlag,
self.Progress
)
self.Fdf = Wa.FdfFile
self.LoadFixAddress = Wa.Platform.LoadFixAddress
self.BuildReport.AddPlatformReport(Wa)
Wa.CreateMakeFile(False)
# multi-thread exit flag
ExitFlag = threading.Event()
ExitFlag.clear()
for Arch in Wa.ArchList:
GlobalData.gGlobalDefines['ARCH'] = Arch
Pa = PlatformAutoGen(Wa, self.PlatformFile, BuildTarget, ToolChain, Arch)
if Pa == None:
continue
pModules = []
for Module in Pa.Platform.Modules:
# Get ModuleAutoGen object to generate C code file and makefile
Ma = ModuleAutoGen(Wa, Module, BuildTarget, ToolChain, Arch, self.PlatformFile)
if Ma == None:
continue
# Not to auto-gen for targets 'clean', 'cleanlib', 'cleanall', 'run', 'fds'
if self.Target not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:
# for target which must generate AutoGen code and makefile
if not self.SkipAutoGen or self.Target == 'genc':
Ma.CreateCodeFile(True)
if self.Target == "genc":
continue
if not self.SkipAutoGen or self.Target == 'genmake':
Ma.CreateMakeFile(True)
Ma.CreateAsBuiltInf()
if self.Target == "genmake":
continue
pModules.append(Ma)
self.Progress.Stop("done!")
for Ma in pModules:
# Generate build task for the module
Bt = BuildTask.New(ModuleMakeUnit(Ma, self.Target))
# Break build if any build thread has error
if BuildTask.HasError():
# we need a full version of makefile for platform
ExitFlag.set()
BuildTask.WaitForComplete()
Pa.CreateMakeFile(False)
EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)
# Start task scheduler
if not BuildTask.IsOnGoing():
BuildTask.StartScheduler(self.ThreadNumber, ExitFlag)
# in case there's an interruption. we need a full version of makefile for platform
Pa.CreateMakeFile(False)
if BuildTask.HasError():
EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)
#
# Save temp tables to a TmpTableDict.
#
for Key in Wa.BuildDatabase._CACHE_:
if Wa.BuildDatabase._CACHE_[Key]._RawData and Wa.BuildDatabase._CACHE_[Key]._RawData._Table and Wa.BuildDatabase._CACHE_[Key]._RawData._Table.Table:
if TemporaryTablePattern.match(Wa.BuildDatabase._CACHE_[Key]._RawData._Table.Table):
TmpTableDict[Wa.BuildDatabase._CACHE_[Key]._RawData._Table.Table] = Wa.BuildDatabase._CACHE_[Key]._RawData._Table.Cur
#
#
# All modules have been put in build tasks queue. Tell task scheduler
# to exit if all tasks are completed
#
ExitFlag.set()
BuildTask.WaitForComplete()
#
# Check for build error, and raise exception if one
# has been signaled.
#
if BuildTask.HasError():
EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)
# Create MAP file when Load Fix Address is enabled.
if self.Target in ["", "all", "fds"]:
for Arch in Wa.ArchList:
#
# Check whether the set fix address is above 4G for 32bit image.
#
if (Arch == 'IA32' or Arch == 'ARM') and self.LoadFixAddress != 0xFFFFFFFFFFFFFFFF and self.LoadFixAddress >= 0x100000000:
EdkLogger.error("build", PARAMETER_INVALID, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")
#
# Get Module List
#
ModuleList = {}
for Pa in Wa.AutoGenObjectList:
for Ma in Pa.ModuleAutoGenList:
if Ma == None:
continue
if not Ma.IsLibrary:
ModuleList[Ma.Guid.upper()] = Ma
#
# Rebase module to the preferred memory address before GenFds
#
MapBuffer = StringIO('')
if self.LoadFixAddress != 0:
self._CollectModuleMapBuffer(MapBuffer, ModuleList)
if self.Fdf:
#
# Generate FD image if there's a FDF file found
#
LaunchCommand(Wa.GenFdsCommand, os.getcwd())
#
# Create MAP file for all platform FVs after GenFds.
#
self._CollectFvMapBuffer(MapBuffer, Wa, ModuleList)
#
# Save MAP buffer into MAP file.
#
self._SaveMapFile(MapBuffer, Wa)
## Generate GuidedSectionTools.txt in the FV directories.
#
def CreateGuidedSectionToolsFile(self):
for BuildTarget in self.BuildTargetList:
for ToolChain in self.ToolChainList:
Wa = WorkspaceAutoGen(
self.WorkspaceDir,
self.PlatformFile,
BuildTarget,
ToolChain,
self.ArchList,
self.BuildDatabase,
self.TargetTxt,
self.ToolDef,
self.Fdf,
self.FdList,
self.FvList,
self.CapList,
self.SkuId,
self.UniFlag
)
FvDir = Wa.FvDir
if not os.path.exists(FvDir):
continue
for Arch in self.ArchList:
# Build up the list of supported architectures for this build
prefix = '%s_%s_%s_' % (BuildTarget, ToolChain, Arch)
# Look through the tool definitions for GUIDed tools
guidAttribs = []
for (attrib, value) in self.ToolDef.ToolsDefTxtDictionary.iteritems():
if attrib.upper().endswith('_GUID'):
split = attrib.split('_')
thisPrefix = '_'.join(split[0:3]) + '_'
if thisPrefix == prefix:
guid = self.ToolDef.ToolsDefTxtDictionary[attrib]
guid = guid.lower()
toolName = split[3]
path = '_'.join(split[0:4]) + '_PATH'
path = self.ToolDef.ToolsDefTxtDictionary[path]
path = self.GetFullPathOfTool(path)
guidAttribs.append((guid, toolName, path))
# Write out GuidedSecTools.txt
toolsFile = os.path.join(FvDir, 'GuidedSectionTools.txt')
toolsFile = open(toolsFile, 'wt')
for guidedSectionTool in guidAttribs:
print >> toolsFile, ' '.join(guidedSectionTool)
toolsFile.close()
## Returns the full path of the tool.
#
def GetFullPathOfTool (self, tool):
if os.path.exists(tool):
return os.path.realpath(tool)
else:
# We need to search for the tool using the
# PATH environment variable.
for dirInPath in os.environ['PATH'].split(os.pathsep):
foundPath = os.path.join(dirInPath, tool)
if os.path.exists(foundPath):
return os.path.realpath(foundPath)
# If the tool was not found in the path then we just return
# the input tool.
return tool
## Launch the module or platform build
#
def Launch(self):
if not self.ModuleFile:
if not self.SpawnMode or self.Target not in ["", "all"]:
self.SpawnMode = False
self._BuildPlatform()
else:
self._MultiThreadBuildPlatform()
self.CreateGuidedSectionToolsFile()
else:
self.SpawnMode = False
self._BuildModule()
## Do some clean-up works when error occurred
def Relinquish(self):
OldLogLevel = EdkLogger.GetLevel()
EdkLogger.SetLevel(EdkLogger.ERROR)
#self.DumpBuildData()
Utils.Progressor.Abort()
if self.SpawnMode == True:
BuildTask.Abort()
EdkLogger.SetLevel(OldLogLevel)
def DumpBuildData(self):
CacheDirectory = os.path.join(self.WorkspaceDir, gBuildCacheDir)
Utils.CreateDirectory(CacheDirectory)
Utils.DataDump(Utils.gFileTimeStampCache, os.path.join(CacheDirectory, "gFileTimeStampCache"))
Utils.DataDump(Utils.gDependencyDatabase, os.path.join(CacheDirectory, "gDependencyDatabase"))
def RestoreBuildData(self):
FilePath = os.path.join(self.WorkspaceDir, gBuildCacheDir, "gFileTimeStampCache")
if Utils.gFileTimeStampCache == {} and os.path.isfile(FilePath):
Utils.gFileTimeStampCache = Utils.DataRestore(FilePath)
if Utils.gFileTimeStampCache == None:
Utils.gFileTimeStampCache = {}
FilePath = os.path.join(self.WorkspaceDir, gBuildCacheDir, "gDependencyDatabase")
if Utils.gDependencyDatabase == {} and os.path.isfile(FilePath):
Utils.gDependencyDatabase = Utils.DataRestore(FilePath)
if Utils.gDependencyDatabase == None:
Utils.gDependencyDatabase = {}
def ParseDefines(DefineList=[]):
DefineDict = {}
if DefineList != None:
for Define in DefineList:
DefineTokenList = Define.split("=", 1)
if not GlobalData.gMacroNamePattern.match(DefineTokenList[0]):
EdkLogger.error('build', FORMAT_INVALID,
"The macro name must be in the pattern [A-Z][A-Z0-9_]*",
ExtraData=DefineTokenList[0])
if len(DefineTokenList) == 1:
DefineDict[DefineTokenList[0]] = "TRUE"
else:
DefineDict[DefineTokenList[0]] = DefineTokenList[1].strip()
return DefineDict
gParamCheck = []
def SingleCheckCallback(option, opt_str, value, parser):
if option not in gParamCheck:
setattr(parser.values, option.dest, value)
gParamCheck.append(option)
else:
parser.error("Option %s only allows one instance in command line!" % option)
## Parse command line options
#
# Using standard Python module optparse to parse command line option of this tool.
#
# @retval Opt A optparse.Values object containing the parsed options
# @retval Args Target of build command
#
def MyOptionParser():
Parser = OptionParser(description=__copyright__,version=__version__,prog="build.exe",usage="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")
Parser.add_option("-a", "--arch", action="append", type="choice", choices=['IA32','X64','IPF','EBC','ARM', 'AARCH64'], dest="TargetArch",
help="ARCHS is one of list: IA32, X64, IPF, ARM, AARCH64 or EBC, which overrides target.txt's TARGET_ARCH definition. To specify more archs, please repeat this option.")
Parser.add_option("-p", "--platform", action="callback", type="string", dest="PlatformFile", callback=SingleCheckCallback,
help="Build the platform specified by the DSC file name argument, overriding target.txt's ACTIVE_PLATFORM definition.")
Parser.add_option("-m", "--module", action="callback", type="string", dest="ModuleFile", callback=SingleCheckCallback,
help="Build the module specified by the INF file name argument.")
Parser.add_option("-b", "--buildtarget", type="string", dest="BuildTarget", help="Using the TARGET to build the platform, overriding target.txt's TARGET definition.",
action="append")
Parser.add_option("-t", "--tagname", action="append", type="string", dest="ToolChain",
help="Using the Tool Chain Tagname to build the platform, overriding target.txt's TOOL_CHAIN_TAG definition.")
Parser.add_option("-x", "--sku-id", action="callback", type="string", dest="SkuId", callback=SingleCheckCallback,
help="Using this name of SKU ID to build the platform, overriding SKUID_IDENTIFIER in DSC file.")
Parser.add_option("-n", action="callback", type="int", dest="ThreadNumber", callback=SingleCheckCallback,
help="Build the platform using multi-threaded compiler. The value overrides target.txt's MAX_CONCURRENT_THREAD_NUMBER. Less than 2 will disable multi-thread builds.")
Parser.add_option("-f", "--fdf", action="callback", type="string", dest="FdfFile", callback=SingleCheckCallback,
help="The name of the FDF file to use, which overrides the setting in the DSC file.")
Parser.add_option("-r", "--rom-image", action="append", type="string", dest="RomImage", default=[],
help="The name of FD to be generated. The name must be from [FD] section in FDF file.")
Parser.add_option("-i", "--fv-image", action="append", type="string", dest="FvImage", default=[],
help="The name of FV to be generated. The name must be from [FV] section in FDF file.")
Parser.add_option("-C", "--capsule-image", action="append", type="string", dest="CapName", default=[],
help="The name of Capsule to be generated. The name must be from [Capsule] section in FDF file.")
Parser.add_option("-u", "--skip-autogen", action="store_true", dest="SkipAutoGen", help="Skip AutoGen step.")
Parser.add_option("-e", "--re-parse", action="store_true", dest="Reparse", help="Re-parse all meta-data files.")
Parser.add_option("-c", "--case-insensitive", action="store_true", dest="CaseInsensitive", default=False, help="Don't check case of file name.")
Parser.add_option("-w", "--warning-as-error", action="store_true", dest="WarningAsError", help="Treat warning in tools as error.")
Parser.add_option("-j", "--log", action="store", dest="LogFile", help="Put log in specified file as well as on console.")
Parser.add_option("-s", "--silent", action="store_true", type=None, dest="SilentMode",
help="Make use of silent mode of (n)make.")
Parser.add_option("-q", "--quiet", action="store_true", type=None, help="Disable all messages except FATAL ERRORS.")
Parser.add_option("-v", "--verbose", action="store_true", type=None, help="Turn on verbose output with informational messages printed, "\
"including library instances selected, final dependency expression, "\
"and warning messages, etc.")
Parser.add_option("-d", "--debug", action="store", type="int", help="Enable debug messages at specified level.")
Parser.add_option("-D", "--define", action="append", type="string", dest="Macros", help="Macro: \"Name [= Value]\".")
Parser.add_option("-y", "--report-file", action="store", dest="ReportFile", help="Create/overwrite the report to the specified filename.")
Parser.add_option("-Y", "--report-type", action="append", type="choice", choices=['PCD','LIBRARY','FLASH','DEPEX','BUILD_FLAGS','FIXED_ADDRESS', 'EXECUTION_ORDER'], dest="ReportType", default=[],
help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, EXECUTION_ORDER]. "\
"To specify more than one flag, repeat this option on the command line and the default flag set is [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS]")
Parser.add_option("-F", "--flag", action="store", type="string", dest="Flag",
help="Specify the specific option to parse EDK UNI file. Must be one of: [-c, -s]. -c is for EDK framework UNI file, and -s is for EDK UEFI UNI file. "\
"This option can also be specified by setting *_*_*_BUILD_FLAGS in [BuildOptions] section of platform DSC. If they are both specified, this value "\
"will override the setting in [BuildOptions] section of platform DSC.")
Parser.add_option("-N", "--no-cache", action="store_true", dest="DisableCache", default=False, help="Disable build cache mechanism")
(Opt, Args)=Parser.parse_args()
return (Opt, Args)
## Tool entrance method
#
# This method mainly dispatch specific methods per the command line options.
# If no error found, return zero value so the caller of this tool can know
# if it's executed successfully or not.
#
# @retval 0 Tool was successful
# @retval 1 Tool failed
#
def Main():
StartTime = time.time()
# Initialize log system
EdkLogger.Initialize()
#
# Parse the options and args
#
(Option, Target) = MyOptionParser()
GlobalData.gOptions = Option
GlobalData.gCaseInsensitive = Option.CaseInsensitive
# Set log level
if Option.verbose != None:
EdkLogger.SetLevel(EdkLogger.VERBOSE)
elif Option.quiet != None:
EdkLogger.SetLevel(EdkLogger.QUIET)
elif Option.debug != None:
EdkLogger.SetLevel(Option.debug + 1)
else:
EdkLogger.SetLevel(EdkLogger.INFO)
if Option.LogFile != None:
EdkLogger.SetLogFile(Option.LogFile)
if Option.WarningAsError == True:
EdkLogger.SetWarningAsError()
if platform.platform().find("Windows") >= 0:
GlobalData.gIsWindows = True
else:
GlobalData.gIsWindows = False
EdkLogger.quiet("Build environment: %s" % platform.platform())
EdkLogger.quiet(time.strftime("Build start time: %H:%M:%S, %b.%d %Y\n", time.localtime()));
ReturnCode = 0
MyBuild = None
try:
if len(Target) == 0:
Target = "all"
elif len(Target) >= 2:
EdkLogger.error("build", OPTION_NOT_SUPPORTED, "More than one targets are not supported.",
ExtraData="Please select one of: %s" %(' '.join(gSupportedTarget)))
else:
Target = Target[0].lower()
if Target not in gSupportedTarget:
EdkLogger.error("build", OPTION_NOT_SUPPORTED, "Not supported target [%s]." % Target,
ExtraData="Please select one of: %s" %(' '.join(gSupportedTarget)))
#
# Check environment variable: EDK_TOOLS_PATH, WORKSPACE, PATH
#
CheckEnvVariable()
GlobalData.gCommandLineDefines.update(ParseDefines(Option.Macros))
Workspace = os.getenv("WORKSPACE")
#
# Get files real name in workspace dir
#
GlobalData.gAllFiles = Utils.DirCache(Workspace)
WorkingDirectory = os.getcwd()
if not Option.ModuleFile:
FileList = glob.glob(os.path.normpath(os.path.join(WorkingDirectory, '*.inf')))
FileNum = len(FileList)
if FileNum >= 2:
EdkLogger.error("build", OPTION_NOT_SUPPORTED, "There are %d INF files in %s." % (FileNum, WorkingDirectory),
ExtraData="Please use '-m <INF_FILE_PATH>' switch to choose one.")
elif FileNum == 1:
Option.ModuleFile = NormFile(FileList[0], Workspace)
if Option.ModuleFile:
if os.path.isabs (Option.ModuleFile):
if os.path.normcase (os.path.normpath(Option.ModuleFile)).find (Workspace) == 0:
Option.ModuleFile = NormFile(os.path.normpath(Option.ModuleFile), Workspace)
Option.ModuleFile = PathClass(Option.ModuleFile, Workspace)
ErrorCode, ErrorInfo = Option.ModuleFile.Validate(".inf", False)
if ErrorCode != 0:
EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)
if Option.PlatformFile != None:
if os.path.isabs (Option.PlatformFile):
if os.path.normcase (os.path.normpath(Option.PlatformFile)).find (Workspace) == 0:
Option.PlatformFile = NormFile(os.path.normpath(Option.PlatformFile), Workspace)
Option.PlatformFile = PathClass(Option.PlatformFile, Workspace)
if Option.FdfFile != None:
if os.path.isabs (Option.FdfFile):
if os.path.normcase (os.path.normpath(Option.FdfFile)).find (Workspace) == 0:
Option.FdfFile = NormFile(os.path.normpath(Option.FdfFile), Workspace)
Option.FdfFile = PathClass(Option.FdfFile, Workspace)
ErrorCode, ErrorInfo = Option.FdfFile.Validate(".fdf", False)
if ErrorCode != 0:
EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)
if Option.Flag != None and Option.Flag not in ['-c', '-s']:
EdkLogger.error("build", OPTION_VALUE_INVALID, "UNI flag must be one of -c or -s")
MyBuild = Build(Target, Workspace, Option)
GlobalData.gCommandLineDefines['ARCH'] = ' '.join(MyBuild.ArchList)
MyBuild.Launch()
# Drop temp tables to avoid database locked.
for TmpTableName in TmpTableDict:
SqlCommand = """drop table IF EXISTS %s""" % TmpTableName
TmpTableDict[TmpTableName].execute(SqlCommand)
#MyBuild.DumpBuildData()
except FatalError, X:
if MyBuild != None:
# for multi-thread build exits safely
MyBuild.Relinquish()
if Option != None and Option.debug != None:
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())
ReturnCode = X.args[0]
except Warning, X:
# error from Fdf parser
if MyBuild != None:
# for multi-thread build exits safely
MyBuild.Relinquish()
if Option != None and Option.debug != None:
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())
else:
EdkLogger.error(X.ToolName, FORMAT_INVALID, File=X.FileName, Line=X.LineNumber, ExtraData=X.Message, RaiseError = False)
ReturnCode = FORMAT_INVALID
except KeyboardInterrupt:
ReturnCode = ABORT_ERROR
if Option != None and Option.debug != None:
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())
except:
if MyBuild != None:
# for multi-thread build exits safely
MyBuild.Relinquish()
# try to get the meta-file from the object causing exception
Tb = sys.exc_info()[-1]
MetaFile = GlobalData.gProcessingFile
while Tb != None:
if 'self' in Tb.tb_frame.f_locals and hasattr(Tb.tb_frame.f_locals['self'], 'MetaFile'):
MetaFile = Tb.tb_frame.f_locals['self'].MetaFile
Tb = Tb.tb_next
EdkLogger.error(
"\nbuild",
CODE_ERROR,
"Unknown fatal error when processing [%s]" % MetaFile,
ExtraData="\n(Please send email to edk2-buildtools-devel@lists.sourceforge.net for help, attaching following call stack trace!)\n",
RaiseError=False
)
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())
ReturnCode = CODE_ERROR
finally:
Utils.Progressor.Abort()
if ReturnCode == 0:
Conclusion = "Done"
elif ReturnCode == ABORT_ERROR:
Conclusion = "Aborted"
else:
Conclusion = "Failed"
FinishTime = time.time()
BuildDuration = time.gmtime(int(round(FinishTime - StartTime)))
BuildDurationStr = ""
if BuildDuration.tm_yday > 1:
BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration) + ", %d day(s)"%(BuildDuration.tm_yday - 1)
else:
BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration)
if MyBuild != None:
MyBuild.BuildReport.GenerateReport(BuildDurationStr)
MyBuild.Db.Close()
EdkLogger.SetLevel(EdkLogger.QUIET)
EdkLogger.quiet("\n- %s -" % Conclusion)
EdkLogger.quiet(time.strftime("Build end time: %H:%M:%S, %b.%d %Y", time.localtime()))
EdkLogger.quiet("Build total time: %s\n" % BuildDurationStr)
return ReturnCode
if __name__ == '__main__':
r = Main()
## 0-127 is a safe return range, and 1 is a standard default error
if r < 0 or r > 127: r = 1
sys.exit(r)
Reference in New Issue View Git Blame Copy Permalink