audk/EdkModulePkg/Library/EdkUefiDebugLibConOut/DebugLib.c

301 lines
8.4 KiB
C
Raw Blame History

/** @file
UEFI Debug Library that uses PrintLib to send messages to CONOUT.
Copyright (c) 2006, Intel Corporation<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
//
// Define the maximum debug and assert message length that this library supports.
//
#define MAX_DEBUG_MESSAGE_LENGTH 0x100
STATIC BOOLEAN mDebugLevelInstalled = FALSE;
STATIC EFI_DEBUG_LEVEL_PROTOCOL mDebugLevel = { 0 };
/**
Installs Debug Level Protocol.
The constructor function installs Debug Level Protocol on the ImageHandle.
It will ASSERT() if the installation fails and will always return EFI_SUCCESS.
@param ImageHandle The firmware allocated handle for the EFI image.
@param SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
**/
EFI_STATUS
EFIAPI
DebugLibConstructor (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
//
// Initialize Debug Level Protocol.
//
mDebugLevel.DebugLevel = PcdGet32(PcdDebugPrintErrorLevel);
//
// Install Debug Level Protocol.
//
Status = gBS->InstallMultipleProtocolInterfaces (
&ImageHandle,
&gEfiDebugLevelProtocolGuid,
&mDebugLevel,
NULL
);
ASSERT_EFI_ERROR (Status);
//
// Set flag to show that the Debug Level Protocol has been installed.
//
mDebugLevelInstalled = TRUE;
return Status;
}
/**
Prints a debug message to the debug output device if the specified error level is enabled.
If any bit in ErrorLevel is also set in PcdDebugPrintErrorLevel, then print
the message specified by Format and the associated variable argument list to
the debug output device.
If Format is NULL, then ASSERT().
@param ErrorLevel The error level of the debug message.
@param Format Format string for the debug message to print.
**/
VOID
EFIAPI
DebugPrint (
IN UINTN ErrorLevel,
IN CONST CHAR8 *Format,
...
)
{
CHAR16 Buffer[MAX_DEBUG_MESSAGE_LENGTH];
VA_LIST Marker;
//
// If Format is NULL, then ASSERT().
//
ASSERT (Format != NULL);
//
// Check driver Debug Level value and global debug level
//
if (mDebugLevelInstalled) {
if ((ErrorLevel & mDebugLevel.DebugLevel) == 0) {
return;
}
} else {
if ((ErrorLevel & PcdGet32(PcdDebugPrintErrorLevel)) == 0) {
return;
}
}
//
// Convert the DEBUG() message to a Unicode String
//
VA_START (Marker, Format);
UnicodeVSPrintAsciiFormat (Buffer, sizeof (Buffer), Format, Marker);
VA_END (Marker);
//
// Send the print string to the Console Output device if CONOUT is available.
//
if (gST->ConOut != NULL) {
gST->ConOut->OutputString (gST->ConOut, Buffer);
}
}
/**
Prints an assert message containing a filename, line number, and description.
This may be followed by a breakpoint or a dead loop.
Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if
DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then
CpuDeadLoop() is called. If neither of these bits are set, then this function
returns immediately after the message is printed to the debug output device.
DebugAssert() must actively prevent recusrsion. If DebugAssert() is called while
processing another DebugAssert(), then DebugAssert() must return immediately.
If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed.
If Description is NULL, then a <Description> string of "(NULL) Description" is printed.
@param FileName Pointer to the name of the source file that generated the assert condition.
@param LineNumber The line number in the source file that generated the assert condition
@param Description Pointer to the description of the assert condition.
**/
VOID
EFIAPI
DebugAssert (
IN CONST CHAR8 *FileName,
IN UINTN LineNumber,
IN CONST CHAR8 *Description
)
{
CHAR16 Buffer[MAX_DEBUG_MESSAGE_LENGTH];
//
// Generate the ASSERT() message in Unicode format
//
UnicodeSPrintAsciiFormat (Buffer, sizeof (Buffer), "ASSERT %s(%d): %s\n", FileName, LineNumber, Description);
//
// Send the print string to the Console Output device if CONOUT is available.
//
if (gST->ConOut != NULL) {
gST->ConOut->OutputString (gST->ConOut, Buffer);
}
//
// Generate a Breakpoint, DeadLoop, or NOP based on PCD settings
//
if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) {
CpuBreakpoint ();
} else if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) {
CpuDeadLoop ();
}
}
/**
Fills a target buffer with PcdDebugClearMemoryValue, and returns the target buffer.
This function fills Length bytes of Buffer with the value specified by
PcdDebugClearMemoryValue, and returns Buffer.
If Buffer is NULL, then ASSERT().
If Length is greater than (MAX_ADDRESS <20> Buffer + 1), then ASSERT().
@param Buffer Pointer to the target buffer to fill with PcdDebugClearMemoryValue.
@param Length Number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue.
@return Buffer
**/
VOID *
EFIAPI
DebugClearMemory (
OUT VOID *Buffer,
IN UINTN Length
)
{
//
// If Buffer is NULL, then ASSERT().
//
ASSERT (Buffer != NULL);
//
// SetMem() checks for the the ASSERT() condition on Length and returns Buffer
//
return SetMem (Buffer, Length, PcdGet8(PcdDebugClearMemoryValue));
}
/**
Returns TRUE if ASSERT() macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
PcdDebugProperyMask is set. Otherwise FALSE is returned.
@retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
@retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.
**/
BOOLEAN
EFIAPI
DebugAssertEnabled (
VOID
)
{
return ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0);
}
/**
Returns TRUE if DEBUG()macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
PcdDebugProperyMask is set. Otherwise FALSE is returned.
@retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
@retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.
**/
BOOLEAN
EFIAPI
DebugPrintEnabled (
VOID
)
{
return ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0);
}
/**
Returns TRUE if DEBUG_CODE()macros are enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
PcdDebugProperyMask is set. Otherwise FALSE is returned.
@retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
@retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.
**/
BOOLEAN
EFIAPI
DebugCodeEnabled (
VOID
)
{
return ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0);
}
/**
Returns TRUE if DEBUG_CLEAR_MEMORY()macro is enabled.
This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of
PcdDebugProperyMask is set. Otherwise FALSE is returned.
@retval TRUE The DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
@retval FALSE The DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.
**/
BOOLEAN
EFIAPI
DebugClearMemoryEnabled (
VOID
)
{
return ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0);
}