tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/QuarkSocPkg/QuarkNorthCluster/Include/QuarkNcSocId.h

758 lines
37 KiB
C
Raw Blame History

/** @file
QuarkNcSocId Register Definitions
Copyright (c) 2013-2015 Intel Corporation.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Definitions beginning with "R_" are registers
Definitions beginning with "B_" are bits within registers
Definitions beginning with "V_" are meaningful values of bits within the registers
Definitions beginning with "S_" are register sizes
Definitions beginning with "N_" are the bit position
**/
#ifndef _QUARK_NC_SOC_ID_H_
#define _QUARK_NC_SOC_ID_H_
//
// QNC GMCH Equates
//
//
// DEVICE 0 (Memroy Controller Hub)
//
#define MC_BUS PCI_BUS_NUMBER_QNC
#define MC_DEV 0x00
#define MC_FUN 0x00
#define QUARK_MC_VENDOR_ID V_INTEL_VENDOR_ID
#define QUARK_MC_DEVICE_ID 0x0958
#define QUARK2_MC_DEVICE_ID 0x12C0
#define QNC_MC_REV_ID_A0 0x00
//
// MCR - B0:D0:F0:RD0h (WO)- Message control register
// [31:24] Message opcode - D0 read; E0 write;
// [23:16] Message port
// [15:8 ] Message target register address
// [ 7:4 ] Message write byte enable : F is enable
// [ 3:0 ] Reserved
//
#define QNC_ACCESS_PORT_MCR 0xD0 // Message Control Register
// Always Set to 0xF0
//
//MDR - B0:D0:F0:RD4h (RW)- Message data register
//
#define QNC_ACCESS_PORT_MDR 0xD4 // Message Data Register
//
//MEA - B0:D0:F0:RD8h (RW)- Message extended address register
//
#define QNC_ACCESS_PORT_MEA 0xD8 // Message Extended Address Register
#define QNC_MCR_OP_OFFSET 24 // Offset of the opcode field in MCR
#define QNC_MCR_PORT_OFFSET 16 // Offset of the port field in MCR
#define QNC_MCR_REG_OFFSET 8 // Offset of the register field in MCR
//
// Misc Useful Macros
//
#define LShift16(value) (value << 16)
//
// QNC Message OpCodes and Attributes
//
#define QUARK_OPCODE_READ 0x10 // Quark message bus "read" opcode
#define QUARK_OPCODE_WRITE 0x11 // Quark message bus "write" opcode
//
// Alternative opcodes for the SCSS block
//
#define QUARK_ALT_OPCODE_READ 0x06 // Quark message bus "read" opcode
#define QUARK_ALT_OPCODE_WRITE 0x07 // Quark message bus "write" opcode
//
// QNC Message OpCodes and Attributes for IO
//
#define QUARK_OPCODE_IO_READ 0x02 // Quark message bus "IO read" opcode
#define QUARK_OPCODE_IO_WRITE 0x03 // Quark message bus "IO write" opcode
#define QUARK_DRAM_BASE_ADDR_READY 0x78 // Quark message bus "RMU Main binary shadow" opcode
#define QUARK_ECC_SCRUB_RESUME 0xC2 // Quark Remote Management Unit "scrub resume" opcode
#define QUARK_ECC_SCRUB_PAUSE 0xC3 // Quark Remote Management Unit "scrub pause" opcode
//
// QNC Message Ports and Registers
//
// Start of SB Port IDs
#define QUARK_NC_MEMORY_ARBITER_SB_PORT_ID 0x00
#define QUARK_NC_MEMORY_CONTROLLER_SB_PORT_ID 0x01
#define QUARK_NC_HOST_BRIDGE_SB_PORT_ID 0x03
#define QUARK_NC_RMU_SB_PORT_ID 0x04
#define QUARK_NC_MEMORY_MANAGER_SB_PORT_ID 0x05
#define QUARK_SC_USB_AFE_SB_PORT_ID 0x14
#define QUARK_SC_PCIE_AFE_SB_PORT_ID 0x16
#define QUARK_SCSS_SOC_UNIT_SB_PORT_ID 0x31
#define QUARK_SCSS_FUSE_SB_PORT_ID 0x33
#define QUARK_ICLK_SB_PORT_ID 0x32
#define QUARK_SCSS_CRU_SB_PORT_ID 0x34
//
// Quark Memory Arbiter Registers.
//
#define QUARK_NC_MEMORY_ARBITER_REG_ASTATUS 0x21 // Memory Arbiter PRI Status encodings register.
#define ASTATUS_PRI_CASUAL 0x0 // Serviced only if convenient
#define ASTATUS_PRI_IMPENDING 0x1 // Serviced if the DRAM is in Self-Refresh.
#define ASTATUS_PRI_NORMAL 0x2 // Normal request servicing.
#define ASTATUS_PRI_URGENT 0x3 // Urgent request servicing.
#define ASTATUS1_RASISED_BP (10)
#define ASTATUS1_RASISED_BP_MASK (0x03 << ASTATUS1_RASISED_BP)
#define ASTATUS0_RASISED_BP (8)
#define ASTATUS0_RASISED_BP_MASK (0x03 << ASTATUS1_RASISED_BP)
#define ASTATUS1_DEFAULT_BP (2)
#define ASTATUS1_DEFAULT_BP_MASK (0x03 << ASTATUS1_RASISED_BP)
#define ASTATUS0_DEFAULT_BP (0)
#define ASTATUS0_DEFAULT_BP_MASK (0x03 << ASTATUS1_RASISED_BP)
//
// Quark Memory Controller Registers.
//
#define QUARK_NC_MEMORY_CONTROLLER_REG_DFUSESTAT 0x70 // Fuse status register.
#define B_DFUSESTAT_ECC_DIS (BIT0) // Disable ECC.
//
// Quark Remote Management Unit Registers.
//
#define QNC_MSG_TMPM_REG_PMBA 0x70 // Power Management I/O Base Address
#define QUARK_NC_RMU_REG_CONFIG 0x71 // Remote Management Unit configuration register.
#define TS_LOCK_AUX_TRIP_PT_REGS_ENABLE (BIT6)
#define TS_LOCK_THRM_CTRL_REGS_ENABLE (BIT5)
#define QUARK_NC_RMU_REG_OPTIONS_1 0x72 // Remote Management Unit Options register 1.
#define OPTIONS_1_DMA_DISABLE (BIT0)
#define QUARK_NC_RMU_REG_WDT_CONTROL 0x74 // Remote Management Unit Watchdog control register.
#define B_WDT_CONTROL_DBL_ECC_BIT_ERR_MASK (BIT19 | BIT18)
#define B_WDT_CONTROL_DBL_ECC_BIT_ERR_BP 18
#define V_WDT_CONTROL_DBL_ECC_BIT_ERR_NONE (0x0 << B_WDT_CONTROL_DBL_ECC_BIT_ERR_BP)
#define V_WDT_CONTROL_DBL_ECC_BIT_ERR_CAT (0x1 << B_WDT_CONTROL_DBL_ECC_BIT_ERR_BP)
#define V_WDT_CONTROL_DBL_ECC_BIT_ERR_WARM (0x2 << B_WDT_CONTROL_DBL_ECC_BIT_ERR_BP)
#define V_WDT_CONTROL_DBL_ECC_BIT_ERR_SERR (0x3 << B_WDT_CONTROL_DBL_ECC_BIT_ERR_BP)
#define QUARK_NC_RMU_REG_TS_MODE 0xB0 // Remote Management Unit Thermal sensor mode register.
#define TS_ENABLE (BIT15)
#define QUARK_NC_RMU_REG_TS_TRIP 0xB2 // Remote Management Unit Thermal sensor programmable trip point register.
#define TS_HOT_TRIP_CLEAR_THOLD_BP 24
#define TS_HOT_TRIP_CLEAR_THOLD_MASK (0xFF << TS_HOT_TRIP_CLEAR_THOLD_BP)
#define TS_CAT_TRIP_CLEAR_THOLD_BP 16
#define TS_CAT_TRIP_CLEAR_THOLD_MASK (0xFF << TS_CAT_TRIP_CLEAR_THOLD_BP)
#define TS_HOT_TRIP_SET_THOLD_BP 8
#define TS_HOT_TRIP_SET_THOLD_MASK (0xFF << TS_HOT_TRIP_SET_THOLD_BP)
#define TS_CAT_TRIP_SET_THOLD_BP 0
#define TS_CAT_TRIP_SET_THOLD_MASK (0xFF << TS_CAT_TRIP_SET_THOLD_BP)
#define QUARK_NC_ECC_SCRUB_CONFIG_REG 0x50
#define SCRUB_CFG_INTERVAL_SHIFT 0x00
#define SCRUB_CFG_INTERVAL_MASK 0xFF
#define SCRUB_CFG_BLOCKSIZE_SHIFT 0x08
#define SCRUB_CFG_BLOCKSIZE_MASK 0x1F
#define SCRUB_CFG_ACTIVE (BIT13)
#define SCRUB_CFG_INVALID 0x00000FFF
#define QUARK_NC_ECC_SCRUB_START_MEM_REG 0x76
#define QUARK_NC_ECC_SCRUB_END_MEM_REG 0x77
#define QUARK_NC_ECC_SCRUB_NEXT_READ_REG 0x7C
#define SCRUB_RESUME_MSG() ((UINT32)( \
(QUARK_ECC_SCRUB_RESUME << QNC_MCR_OP_OFFSET) | \
(QUARK_NC_RMU_SB_PORT_ID << QNC_MCR_PORT_OFFSET) | \
0xF0))
#define SCRUB_PAUSE_MSG() ((UINT32)( \
(QUARK_ECC_SCRUB_PAUSE << QNC_MCR_OP_OFFSET) | \
(QUARK_NC_RMU_SB_PORT_ID << QNC_MCR_PORT_OFFSET) | \
0xF0))
//
// Quark Memory Manager Registers
//
#define QUARK_NC_MEMORY_MANAGER_ESRAMPGCTRL_BLOCK 0x82
#define BLOCK_ENABLE_PG (1 << 28)
#define BLOCK_DISABLE_PG (1 << 29)
#define QUARK_NC_MEMORY_MANAGER_BIMRVCTL 0x19
#define EnableIMRInt BIT31
#define QUARK_NC_MEMORY_MANAGER_BSMMVCTL 0x1C
#define EnableSMMInt BIT31
#define QUARK_NC_MEMORY_MANAGER_BTHCTRL 0x20
#define DRAM_NON_HOST_RQ_LIMIT_BP 0
#define DRAM_NON_HOST_RQ_LIMIT_MASK (0x3f << DRAM_NON_HOST_RQ_LIMIT_BP)
#define QUARK_NC_TOTAL_IMR_SET 0x8
#define QUARK_NC_MEMORY_MANAGER_IMR0 0x40
#define QUARK_NC_MEMORY_MANAGER_IMR1 0x44
#define QUARK_NC_MEMORY_MANAGER_IMR2 0x48
#define QUARK_NC_MEMORY_MANAGER_IMR3 0x4C
#define QUARK_NC_MEMORY_MANAGER_IMR4 0x50
#define QUARK_NC_MEMORY_MANAGER_IMR5 0x54
#define QUARK_NC_MEMORY_MANAGER_IMR6 0x58
#define QUARK_NC_MEMORY_MANAGER_IMR7 0x5C
#define QUARK_NC_MEMORY_MANAGER_IMRXL 0x00
#define IMR_LOCK BIT31
#define IMR_EN BIT30
#define IMRL_MASK 0x00FFFFFC
#define IMRL_RESET 0x00000000
#define QUARK_NC_MEMORY_MANAGER_IMRXH 0x01
#define IMRH_MASK 0x00FFFFFC
#define IMRH_RESET 0x00000000
#define QUARK_NC_MEMORY_MANAGER_IMRXRM 0x02
#define QUARK_NC_MEMORY_MANAGER_IMRXWM 0x03
#define IMRX_ALL_ACCESS 0xFFFFFFFF
#define CPU_SNOOP BIT30
#define RMU BIT29
#define CPU0_NON_SMM BIT0
//
// Quark Host Bridge Registers
//
#define QNC_MSG_FSBIC_REG_HMISC 0x03 // Host Misellaneous Controls
#define SMI_EN (BIT19) // SMI Global Enable (from Legacy Bridge)
#define QNC_MSG_FSBIC_REG_HSMMC 0x04 // Host SMM Control
#define NON_HOST_SMM_WR_OPEN (BIT18) // SMM Writes OPEN
#define NON_HOST_SMM_RD_OPEN (BIT17) // SMM Writes OPEN
#define SMM_CODE_RD_OPEN (BIT16) // SMM Code read OPEN
#define SMM_CTL_EN (BIT3) // SMM enable
#define SMM_WRITE_OPEN (BIT2) // SMM Writes OPEN
#define SMM_READ_OPEN (BIT1) // SMM Reads OPEN
#define SMM_LOCKED (BIT0) // SMM Locked
#define SMM_START_MASK 0x0000FFF0
#define SMM_END_MASK 0xFFF00000
#define QUARK_NC_HOST_BRIDGE_HMBOUND_REG 0x08
#define HMBOUND_MASK 0x0FFFFF000
#define HMBOUND_LOCK BIT0
#define QUARK_NC_HOST_BRIDGE_HLEGACY_REG 0x0A
#define HLEGACY_SMI_PIN_VALUE BIT12
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_CAP 0x40
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_DEF_TYPE 0x41
#define QUARK_NC_HOST_BRIDGE_MTRR_FIX64K_00000 0x42
#define QUARK_NC_HOST_BRIDGE_MTRR_FIX16K_80000 0x44
#define QUARK_NC_HOST_BRIDGE_MTRR_FIX16K_A0000 0x46
#define QUARK_NC_HOST_BRIDGE_MTRR_FIX4K_C0000 0x48
#define QUARK_NC_HOST_BRIDGE_MTRR_FIX4K_C8000 0x4A
#define QUARK_NC_HOST_BRIDGE_MTRR_FIX4K_D0000 0x4C
#define QUARK_NC_HOST_BRIDGE_MTRR_FIX4K_D8000 0x4E
#define QUARK_NC_HOST_BRIDGE_MTRR_FIX4K_E0000 0x50
#define QUARK_NC_HOST_BRIDGE_MTRR_FIX4K_E8000 0x52
#define QUARK_NC_HOST_BRIDGE_MTRR_FIX4K_F0000 0x54
#define QUARK_NC_HOST_BRIDGE_MTRR_FIX4K_F8000 0x56
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_SMRR_PHYSBASE 0x58
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_SMRR_PHYSMASK 0x59
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSBASE0 0x5A
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSMASK0 0x5B
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSBASE1 0x5C
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSMASK1 0x5D
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSBASE2 0x5E
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSMASK2 0x5F
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSBASE3 0x60
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSMASK3 0x61
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSBASE4 0x62
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSMASK4 0x63
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSBASE5 0x64
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSMASK5 0x65
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSBASE6 0x66
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSMASK6 0x67
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSBASE7 0x68
#define QUARK_NC_HOST_BRIDGE_IA32_MTRR_PHYSMASK7 0x69
//
// System On Chip Unit (SOCUnit) Registers.
//
#define QUARK_SCSS_SOC_UNIT_STPDDRCFG 0x00
#define B_STPDDRCFG_FORCE_RECOVERY BIT0
#define QUARK_SCSS_SOC_UNIT_SPI_ROM_FUSE 0x25
#define B_ROM_FUSE_IN_SECURE_SKU BIT6
#define QUARK_SCSS_SOC_UNIT_TSCGF1_CONFIG 0x31
#define B_TSCGF1_CONFIG_ISNSCURRENTSEL_MASK (BIT5 | BIT4 | BIT3)
#define B_TSCGF1_CONFIG_ISNSCURRENTSEL_BP 3
#define B_TSCGF1_CONFIG_ISNSCHOPSEL_MASK (BIT12 | BIT11 | BIT10 | BIT9 | BIT8)
#define B_TSCGF1_CONFIG_ISNSCHOPSEL_BP 8
#define B_TSCGF1_CONFIG_IBGEN BIT17
#define B_TSCGF1_CONFIG_IBGEN_BP 17
#define B_TSCGF1_CONFIG_IBGCHOPEN BIT18
#define B_TSCGF1_CONFIG_IBGCHOPEN_BP 18
#define B_TSCGF1_CONFIG_ISNSINTERNALVREFEN BIT14
#define B_TSCGF1_CONFIG_ISNSINTERNALVREFEN_BP 14
#define QUARK_SCSS_SOC_UNIT_TSCGF2_CONFIG 0x32
#define B_TSCGF2_CONFIG_IDSCONTROL_MASK 0x0000FFFF
#define B_TSCGF2_CONFIG_IDSCONTROL_BP 0
#define B_TSCGF2_CONFIG_IDSTIMING_MASK 0xFFFF0000
#define B_TSCGF2_CONFIG_IDSTIMING_BP 16
#define QUARK_SCSS_SOC_UNIT_TSCGF2_CONFIG2 0x33
#define B_TSCGF2_CONFIG2_ISPARECTRL_MASK 0xFF000000
#define B_TSCGF2_CONFIG2_ISPARECTRL_BP 24
#define B_TSCGF2_CONFIG2_ICALCONFIGSEL_MASK (BIT9 | BIT8)
#define B_TSCGF2_CONFIG2_ICALCONFIGSEL_BP 8
#define B_TSCGF2_CONFIG2_ICALCOARSETUNE_MASK 0x000000FF
#define B_TSCGF2_CONFIG2_ICALCOARSETUNE_BP 0
#define QUARK_SCSS_SOC_UNIT_TSCGF3_CONFIG 0x34
#define B_TSCGF3_CONFIG_ITSRST BIT0
#define B_TSCGF3_CONFIG_ITSGAMMACOEFF_BP 11
#define B_TSCGF3_CONFIG_ITSGAMMACOEFF_MASK (0xFFF << B_TSCGF3_CONFIG_ITSGAMMACOEFF_BP)
#define QUARK_SCSS_SOC_UNIT_SOCCLKEN_CONFIG 0x36
#define SOCCLKEN_CONFIG_PHY_I_SIDE_RST_L BIT20
#define SOCCLKEN_CONFIG_PHY_I_CMNRESET_L BIT19
#define SOCCLKEN_CONFIG_SBI_BB_RST_B BIT18
#define SOCCLKEN_CONFIG_SBI_RST_100_CORE_B BIT17
#define SOCCLKEN_CONFIG_BB_RST_B BIT16
#define QUARK_SCSS_SOC_UNIT_SOCCLKEN_CONFIG 0x36
#define QUARK_SCSS_SOC_UNIT_CFG_STICKY_RW 0x51
#define B_CFG_STICKY_RW_SMM_VIOLATION BIT0
#define B_CFG_STICKY_RW_HMB_VIOLATION BIT1
#define B_CFG_STICKY_RW_IMR_VIOLATION BIT2
#define B_CFG_STICKY_RW_DECC_VIOLATION BIT3
#define B_CFG_STICKY_RW_WARM_RST BIT4
#define B_CFG_STICKY_RW_FORCE_RECOVERY BIT9
#define B_CFG_STICKY_RW_VIOLATION (B_CFG_STICKY_RW_SMM_VIOLATION | B_CFG_STICKY_RW_HMB_VIOLATION | B_CFG_STICKY_RW_IMR_VIOLATION | B_CFG_STICKY_RW_DECC_VIOLATION)
#define B_CFG_STICKY_RW_ALL (B_CFG_STICKY_RW_VIOLATION | B_CFG_STICKY_RW_WARM_RST)
//
// iCLK Registers.
//
#define QUARK_ICLK_MUXTOP 0x0140
#define B_MUXTOP_FLEX2_MASK (BIT25 | BIT24 | BIT23)
#define B_MUXTOP_FLEX2_BP 23
#define B_MUXTOP_FLEX1_MASK (BIT22 | BIT21 | BIT20)
#define B_MUXTOP_FLEX1_BP 20
#define QUARK_ICLK_SSC1 0x0314
#define QUARK_ICLK_SSC2 0x0414
#define QUARK_ICLK_SSC3 0x0514
#define QUARK_ICLK_REF2_DBUFF0 0x2000
//
// PCIe AFE Unit Registers (QUARK_SC_PCIE_AFE_SB_PORT_ID).
//
#define QUARK_PCIE_AFE_PCIE_RXPICTRL0_L0 0x2080
#define QUARK_PCIE_AFE_PCIE_RXPICTRL0_L1 0x2180
#define OCFGPIMIXLOAD_1_0 BIT6
#define OCFGPIMIXLOAD_1_0_MASK 0xFFFFFF3F
//
// QNC ICH Equates
//
#define V_INTEL_VENDOR_ID 0x8086
#define PCI_BUS_NUMBER_QNC 0x00
//
// PCI to LPC Bridge Registers (D31:F0)
//
#define PCI_DEVICE_NUMBER_QNC_LPC 31
#define PCI_FUNCTION_NUMBER_QNC_LPC 0
#define R_QNC_LPC_VENDOR_ID 0x00
#define V_LPC_VENDOR_ID V_INTEL_VENDOR_ID
#define R_QNC_LPC_DEVICE_ID 0x02
#define QUARK_V_LPC_DEVICE_ID_0 0x095E
#define R_QNC_LPC_REV_ID 0x08
#define R_QNC_LPC_SMBUS_BASE 0x40 //~0x43
#define B_QNC_LPC_SMBUS_BASE_EN (BIT31)
#define B_QNC_LPC_SMBUS_BASE_MASK 0x0000FFC0 //[15:6]
//
// SMBus register offsets from SMBA - "SMBA" (D31:F0:R40h)
// Suggested Value for SMBA = 0x1040
//
#define R_QNC_SMBUS_HCTL 0x00 // Host Control Register R/W
#define B_QNC_SMBUS_START (BIT4) // Start/Stop
#define V_QNC_SMBUS_HCTL_CMD_QUICK 0
#define V_QNC_SMBUS_HCTL_CMD_BYTE 1
#define V_QNC_SMBUS_HCTL_CMD_BYTE_DATA 2
#define V_QNC_SMBUS_HCTL_CMD_WORD_DATA 3
#define V_QNC_SMBUS_HCTL_CMD_PROCESS_CALL 4
#define V_QNC_SMBUS_HCTL_CMD_BLOCK 5
#define R_QNC_SMBUS_HSTS 0x01 // Host Status Register R/W
#define B_QNC_SMBUS_BERR (BIT2) // BUS Error
#define B_QNC_SMBUS_DERR (BIT1) // Device Error
#define B_QNC_SMBUS_BYTE_DONE_STS (BIT0) // Completion Status
#define B_QNC_SMBUS_HSTS_ALL 0x07
#define R_QNC_SMBUS_HCLK 0x02 // Host Clock Divider Register R/W
#define V_QNC_SMBUS_HCLK_100KHZ 0x0054
#define R_QNC_SMBUS_TSA 0x04 // Transmit Slave Address Register R/W
#define V_QNC_SMBUS_RW_SEL_READ 1
#define V_QNC_SMBUS_RW_SEL_WRITE 0
#define R_QNC_SMBUS_HCMD 0x05 // Host Command Register R/W
#define R_QNC_SMBUS_HD0 0x06 // Data 0 Register R/W
#define R_QNC_SMBUS_HD1 0x07 // Data 1 Register R/W
#define R_QNC_SMBUS_HBD 0x20 // Host Block Data Register R/W [255:0] ~ 3Fh
#define R_QNC_LPC_GBA_BASE 0x44
#define B_QNC_LPC_GPA_BASE_MASK 0x0000FFC0
//
// GPIO register offsets from GBA - "GPIO" (D31:F0:R44h)
// Suggested Value for GBA = 0x1080
//
#define R_QNC_GPIO_CGEN_CORE_WELL 0x00
#define R_QNC_GPIO_CGIO_CORE_WELL 0x04
#define R_QNC_GPIO_CGLVL_CORE_WELL 0x08
#define R_QNC_GPIO_CGTPE_CORE_WELL 0x0C // Core well GPIO Trigger Positive Edge Enable
#define R_QNC_GPIO_CGTNE_CORE_WELL 0x10 // Core well GPIO Trigger Negative Edge Enable
#define R_QNC_GPIO_CGGPE_CORE_WELL 0x14 // Core well GPIO GPE Enable
#define R_QNC_GPIO_CGSMI_CORE_WELL 0x18 // Core well GPIO SMI Enable
#define R_QNC_GPIO_CGTS_CORE_WELL 0x1C // Core well GPIO Trigger Status
#define R_QNC_GPIO_RGEN_RESUME_WELL 0x20
#define R_QNC_GPIO_RGIO_RESUME_WELL 0x24
#define R_QNC_GPIO_RGLVL_RESUME_WELL 0x28
#define R_QNC_GPIO_RGTPE_RESUME_WELL 0x2C // Resume well GPIO Trigger Positive Edge Enable
#define R_QNC_GPIO_RGTNE_RESUME_WELL 0x30 // Resume well GPIO Trigger Negative Edge Enable
#define R_QNC_GPIO_RGGPE_RESUME_WELL 0x34 // Resume well GPIO GPE Enable
#define R_QNC_GPIO_RGSMI_RESUME_WELL 0x38 // Resume well GPIO SMI Enable
#define R_QNC_GPIO_RGTS_RESUME_WELL 0x3C // Resume well GPIO Trigger Status
#define R_QNC_GPIO_CNMIEN_CORE_WELL 0x40 // Core well GPIO NMI Enable
#define R_QNC_GPIO_RNMIEN_RESUME_WELL 0x44 // Resume well GPIO NMI Enable
#define R_QNC_LPC_PM1BLK 0x48
#define B_QNC_LPC_PM1BLK_MASK 0x0000FFF0
//
// ACPI register offsets from PM1BLK - "ACPI PM1 Block" (D31:F0:R48h)
// Suggested Value for PM1BLK = 0x1000
//
#define R_QNC_PM1BLK_PM1S 0x00
#define S_QNC_PM1BLK_PM1S 2
#define B_QNC_PM1BLK_PM1S_ALL (BIT15+BIT14+BIT10+BIT5+BIT0)
#define B_QNC_PM1BLK_PM1S_WAKE (BIT15)
#define B_QNC_PM1BLK_PM1S_PCIEWSTS (BIT14)
#define B_QNC_PM1BLK_PM1S_RTC (BIT10)
#define B_QNC_PM1BLK_PM1S_GLOB (BIT5)
#define B_QNC_PM1BLK_PM1S_TO (BIT0)
#define N_QNC_PM1BLK_PM1S_RTC 10
#define R_QNC_PM1BLK_PM1E 0x02
#define S_QNC_PM1BLK_PM1E 2
#define B_QNC_PM1BLK_PM1E_PWAKED (BIT14)
#define B_QNC_PM1BLK_PM1E_RTC (BIT10)
#define B_QNC_PM1BLK_PM1E_GLOB (BIT5)
#define N_QNC_PM1BLK_PM1E_RTC 10
#define R_QNC_PM1BLK_PM1C 0x04
#define B_QNC_PM1BLK_PM1C_SLPEN (BIT13)
#define B_QNC_PM1BLK_PM1C_SLPTP (BIT12+BIT11+BIT10)
#define V_S0 0x00000000
#define V_S3 0x00001400
#define V_S4 0x00001800
#define V_S5 0x00001C00
#define B_QNC_PM1BLK_PM1C_SCIEN (BIT0)
#define R_QNC_PM1BLK_PM1T 0x08
#define R_QNC_LPC_GPE0BLK 0x4C
#define B_QNC_LPC_GPE0BLK_MASK 0x0000FFC0
// Suggested Value for GPE0BLK = 0x10C0
//
#define R_QNC_GPE0BLK_GPE0S 0x00 // General Purpose Event 0 Status
#define S_QNC_GPE0BLK_GPE0S 4
#define B_QNC_GPE0BLK_GPE0S_ALL 0x00003F800 // used to clear the status reg
#define B_QNC_GPE0BLK_GPE0S_PCIE (BIT17) // PCIE
#define B_QNC_GPE0BLK_GPE0S_GPIO (BIT14) // GPIO
#define B_QNC_GPE0BLK_GPE0S_EGPE (BIT13) // External GPE
#define N_QNC_GPE0BLK_GPE0S_THRM 12
#define R_QNC_GPE0BLK_GPE0E 0x04 // General Purpose Event 0 Enable
#define S_QNC_GPE0BLK_GPE0E 4
#define B_QNC_GPE0BLK_GPE0E_PCIE (BIT17) // PCIE
#define B_QNC_GPE0BLK_GPE0E_GPIO (BIT14) // GPIO
#define B_QNC_GPE0BLK_GPE0E_EGPE (BIT13) // External GPE
#define N_QNC_GPE0BLK_GPE0E_THRM 12
#define R_QNC_GPE0BLK_SMIE 0x10 // SMI_B Enable
#define S_QNC_GPE0BLK_SMIE 4
#define B_QNC_GPE0BLK_SMIE_ALL 0x0003871F
#define B_QNC_GPE0BLK_SMIE_APM (BIT4) // APM
#define B_QNC_GPE0BLK_SMIE_SLP (BIT2) // Sleep
#define B_QNC_GPE0BLK_SMIE_SWT (BIT1) // Software Timer
#define N_QNC_GPE0BLK_SMIE_GPIO 9
#define N_QNC_GPE0BLK_SMIE_ESMI 8
#define N_QNC_GPE0BLK_SMIE_APM 4
#define N_QNC_GPE0BLK_SMIE_SPI 3
#define N_QNC_GPE0BLK_SMIE_SLP 2
#define N_QNC_GPE0BLK_SMIE_SWT 1
#define R_QNC_GPE0BLK_SMIS 0x14 // SMI Status Register.
#define S_QNC_GPE0BLK_SMIS 4
#define B_QNC_GPE0BLK_SMIS_ALL 0x0003871F
#define B_QNC_GPE0BLK_SMIS_EOS (BIT31) // End of SMI
#define B_QNC_GPE0BLK_SMIS_APM (BIT4) // APM
#define B_QNC_GPE0BLK_SMIS_SPI (BIT3) // SPI
#define B_QNC_GPE0BLK_SMIS_SLP (BIT2) // Sleep
#define B_QNC_GPE0BLK_SMIS_SWT (BIT1) // Software Timer
#define B_QNC_GPE0BLK_SMIS_BIOS (BIT0) // BIOS
#define N_QNC_GPE0BLK_SMIS_GPIO 9
#define N_QNC_GPE0BLK_SMIS_APM 4
#define N_QNC_GPE0BLK_SMIS_SPI 3
#define N_QNC_GPE0BLK_SMIS_SLP 2
#define N_QNC_GPE0BLK_SMIS_SWT 1
#define R_QNC_GPE0BLK_PMCW 0x28 // Power Management Configuration Core Well
#define B_QNC_GPE0BLK_PMCW_PSE (BIT31) // Periodic SMI Enable
#define R_QNC_GPE0BLK_PMSW 0x2C // Power Management Configuration Suspend/Resume Well
#define B_QNC_GPE0BLK_PMSW_DRAM_INIT (BIT0) // Dram Initialization Sctrachpad
#define R_QNC_LPC_ACTL 0x58
#define V_QNC_LPC_ACTL_SCIS_IRQ9 0x00
//
// Number of PIRQs supported. PIRQA~PIRQH
//
#define QNC_NUMBER_PIRQS 8
#define R_QNC_LPC_PIRQA_ROUT 0x60
#define R_QNC_LPC_PIRQB_ROUT 0x61
#define R_QNC_LPC_PIRQC_ROUT 0x62
#define R_QNC_LPC_PIRQD_ROUT 0x63
#define R_QNC_LPC_PIRQE_ROUT 0x64
#define R_QNC_LPC_PIRQF_ROUT 0x65
#define R_QNC_LPC_PIRQG_ROUT 0x66
#define R_QNC_LPC_PIRQH_ROUT 0x67
//
// Bit values are the same for R_TNC_LPC_PIRQA_ROUT to
// R_TNC_LPC_PIRQH_ROUT
#define B_QNC_LPC_PIRQX_ROUT (BIT3+BIT2+BIT1+BIT0)
#define R_QNC_LPC_WDTBA 0x84
// Watchdog Timer register offsets from WDTBASE (in R_QNC_LPC_WDTBA)------------BEGIN
#define R_QNC_LPC_WDT_WDTCR 0x10
#define R_QNC_LPC_WDT_WDTLR 0x18
// Watchdog Timer register offsets from WDTBASE (in R_QNC_LPC_WDTBA)--------------END
#define R_QNC_LPC_FWH_BIOS_DEC 0xD4
#define B_QNC_LPC_FWH_BIOS_DEC_F8 (BIT31)
#define B_QNC_LPC_FWH_BIOS_DEC_F0 (BIT30)
#define B_QNC_LPC_FWH_BIOS_DEC_E8 (BIT29)
#define B_QNC_LPC_FWH_BIOS_DEC_E0 (BIT28)
#define B_QNC_LPC_FWH_BIOS_DEC_D8 (BIT27)
#define B_QNC_LPC_FWH_BIOS_DEC_D0 (BIT26)
#define B_QNC_LPC_FWH_BIOS_DEC_C8 (BIT25)
#define B_QNC_LPC_FWH_BIOS_DEC_C0 (BIT24)
#define R_QNC_LPC_BIOS_CNTL 0xD8
#define S_QNC_LPC_BIOS_CNTL 4
#define B_QNC_LPC_BIOS_CNTL_PFE (BIT8)
#define B_QNC_LPC_BIOS_CNTL_SMM_BWP (BIT5)
#define B_QNC_LPC_BIOS_CNTL_BCD (BIT2)
#define B_QNC_LPC_BIOS_CNTL_BLE (BIT1)
#define B_QNC_LPC_BIOS_CNTL_BIOSWE (BIT0)
#define N_QNC_LPC_BIOS_CNTL_BLE 1
#define N_QNC_LPC_BIOS_CNTL_BIOSWE 0
#define R_QNC_LPC_RCBA 0xF0
#define B_QNC_LPC_RCBA_MASK 0xFFFFC000
#define B_QNC_LPC_RCBA_EN (BIT0)
//---------------------------------------------------------------------------
// Fixed IO Decode on QuarkNcSocId
//
// 20h(2B) 24h(2B) 28h(2B) 2Ch(2B) 30h(2B) 34h(2B) 38h(2B) 3Ch(2B) : R/W 8259 master
// 40h(3B): R/W 8254
// 43h(1B): W 8254
// 50h(3B): R/W 8254
// 53h(1B): W 8254
// 61h(1B): R/W NMI Controller
// 63h(1B): R/W NMI Controller - can be disabled
// 65h(1B): R/W NMI Controller - can be disabled
// 67h(1B): R/W NMI Controller - can be disabled
// 70h(1B): W NMI & RTC
// 71h(1B): R/W RTC
// 72h(1B): R RTC; W NMI&RTC
// 73h(1B): R/W RTC
// 74h(1B): R RTC; W NMI&RTC
// 75h(1B): R/W RTC
// 76h(1B): R RTC; W NMI&RTC
// 77h(1B): R/W RTC
// 84h(3B): R/W Internal/LPC
// 88h(1B): R/W Internal/LPC
// 8Ch(3B): R/W Internal/LPC
// A0h(2B) A4h(2B) A8h(2B) ACh(2B) B0h(2B) B4h(2B) B8h(2B) BCh(2B): R/W 8259 slave
// B2h(1B) B3h(1B): R/W Power management
// 3B0h-3BBh: R/W VGA
// 3C0h-3DFh: R/W VGA
// CF8h(4B): R/W Internal
// CF9h(1B): R/W LPC
// CFCh(4B): R/W Internal
//---------------------------------------------------------------------------
#define R_APM_CNT 0xB2
//
// Reset Generator I/O Port
//
#define RST_CNT 0xCF9
#define B_RST_CNT_COLD_RST (BIT3) // Cold reset
#define B_RST_CNT_WARM_RST (BIT1) // Warm reset
//
// Processor interface registers (NMI)
//
#define PCI_DEVICE_NUMBER_QNC_IOSF2AHB_0 20
#define PCI_DEVICE_NUMBER_QNC_IOSF2AHB_1 21
#define PCI_FUNCTION_NUMBER_QNC_IOSF2AHB 0
//
// Pci Express Root Ports (D23:F0/F1)
//
#define PCI_DEVICE_NUMBER_PCIE_ROOTPORT 23
#define PCI_FUNCTION_NUMBER_PCIE_ROOTPORT_0 0
#define PCI_FUNCTION_NUMBER_PCIE_ROOTPORT_1 1
#define MAX_PCI_EXPRESS_ROOT_PORTS 2
#define R_QNC_PCIE_BNUM 0x18
#define R_QNC_PCIE_CAP_PTR 0x34
#define PCIE_CAPID 0x10 //PCIE Capability ID
#define PCIE_CAP_EXT_HEARDER_OFFSET 0x100 //PCIE Capability ID
#define PCIE_DEV_CAP_OFFSET 0x04 //PCIE Device Capability reg offset
#define PCIE_LINK_CAP_OFFSET 0x0C //PCIE Link Capability reg offset
#define PCIE_LINK_CNT_OFFSET 0x10 //PCIE Link control reg offset
#define PCIE_LINK_STS_OFFSET 0x12 //PCIE Link status reg offset
#define PCIE_SLOT_CAP_OFFSET 0x14 //PCIE Link Capability reg offset
#define R_QNC_PCIE_XCAP 0x42 //~ 43h
#define B_QNC_PCIE_XCAP_SI (BIT8) //slot implemented
#define R_QNC_PCIE_DCAP 0x44 //~ 47h
#define B_QNC_PCIE_DCAP_E1AL (BIT11 | BIT10 | BIT9) // L1 Acceptable exit latency
#define B_QNC_PCIE_DCAP_E0AL (BIT8 | BIT7 | BIT6) // L0 Acceptable exit latency
#define R_QNC_PCIE_DCTL 0x48 //~ 49h
#define B_QNC_PCIE_DCTL_URE (BIT3) //Unsupported Request Reporting Enable
#define B_QNC_PCIE_DCTL_FEE (BIT2) //Fatal error Reporting Enable
#define B_QNC_PCIE_DCTL_NFE (BIT1) //Non Fatal error Reporting Enable
#define B_QNC_PCIE_DCTL_CEE (BIT0) //Correctable error Reporting Enable
#define R_QNC_PCIE_LCAP 0x4C //~ 4Fh
#define B_QNC_PCIE_LCAP_CPM (BIT18) //clock power management supported
#define B_QNC_PCIE_LCAP_EL1_MASK (BIT17 | BIT16 | BIT15) //L1 Exit latency mask
#define B_QNC_PCIE_LCAP_EL0_MASK (BIT14 | BIT13 | BIT12) //L0 Exit latency mask
#define B_QNC_PCIE_LCAP_APMS_MASK (BIT11 | BIT10) //Active state link PM support mask
#define V_QNC_PCIE_LCAP_APMS_OFFSET 10 //Active state link PM support mask
#define R_QNC_PCIE_LCTL 0x50 //~ 51h
#define B_QNC_PCIE_LCTL_CCC (BIT6) // Clock clock configuration
#define B_QNC_PCIE_LCTL_RL (BIT5) // Retrain link
#define R_QNC_PCIE_LSTS 0x52 //~ 53h
#define B_QNC_PCIE_LSTS_SCC (BIT12) //Slot clock configuration
#define B_QNC_PCIE_LSTS_LT (BIT11) //Link training
#define R_QNC_PCIE_SLCAP 0x54 //~ 57h
#define B_QNC_PCIE_SLCAP_MASK_RSV_VALUE 0x0006007F
#define V_QNC_PCIE_SLCAP_SLV 0x0A //Slot power limit value [14:7]
#define V_QNC_PCIE_SLCAP_SLV_OFFSET 7 //Slot power limit value offset is 7 [14:7]
#define V_QNC_PCIE_SLCAP_PSN_OFFSET 19 //Slot number offset is 19 [31:19]
#define R_QNC_PCIE_SLCTL 0x58 //~ 59h
#define B_QNC_PCIE_SLCTL_HPE (BIT5) // Hot plug interrupt enable
#define B_QNC_PCIE_SLCTL_PDE (BIT3) // Presense detect change enable
#define B_QNC_PCIE_SLCTL_ABE (BIT0) // Attention Button Pressed Enable
#define R_QNC_PCIE_SLSTS 0x5A //~ 5Bh
#define B_QNC_PCIE_SLSTS_PDS (BIT6) // Present Detect State = 1b : has device connected
#define B_QNC_PCIE_SLSTS_PDC (BIT3) // Present Detect changed = 1b : PDS state has changed
#define B_QNC_PCIE_SLSTS_ABP (BIT0) // Attention Button Pressed
#define R_QNC_PCIE_RCTL 0x5C //~ 5Dh
#define B_QNC_PCIE_RCTL_PIE (BIT3) //Root PCI-E PME Interrupt Enable
#define B_QNC_PCIE_RCTL_SFE (BIT2) //Root PCI-E System Error on Fatal Error Enable
#define B_QNC_PCIE_RCTL_SNE (BIT1) //Root PCI-E System Error on Non-Fatal Error Enable
#define B_QNC_PCIE_RCTL_SCE (BIT0) //Root PCI-E System Error on Correctable Error Enable
#define R_QNC_PCIE_SVID 0x94 //~ 97h
#define R_QNC_PCIE_CCFG 0xD0 //~ D3h
#define B_QNC_PCIE_CCFG_UPSD (BIT24) // Upstream Posted Split Disable
#define B_QNC_PCIE_CCFG_UNRS (BIT15) // Upstream Non-Posted Request Size
#define B_QNC_PCIE_CCFG_UPRS (BIT14) // Upstream Posted Request Size
#define R_QNC_PCIE_MPC2 0xD4 //~ D7h
#define B_QNC_PCIE_MPC2_IPF (BIT11) // ISOF Packet Fast Transmit Mode
#define R_QNC_PCIE_MPC 0xD8 //~ DBh
#define B_QNC_PCIE_MPC_PMCE (BIT31) // PM SCI Enable
#define B_QNC_PCIE_MPC_HPCE (BIT30) // Hot plug SCI enable
#define B_QNC_PCIE_MPC_HPME (BIT1) // Hot plug SMI enable
#define B_QNC_PCIE_MPC_PMME (BIT0) // PM SMI Enable
#define R_QNC_PCIE_IOSFSBCTL 0xF6
#define B_QNC_PCIE_IOSFSBCTL_SBIC_MASK (BIT1 | BIT0) // IOSF Sideband ISM Idle Counter.
#define B_QNC_PCIE_IOSFSBCTL_SBIC_IDLE_NEVER (BIT1 | BIT0) // Never transition to IDLE.
#define V_PCIE_MAX_TRY_TIMES 200
//
// Misc PCI register offsets and sizes
//
#define R_EFI_PCI_SVID 0x2C
//
// IO_APIC
//
#define IOAPIC_BASE 0xFEC00000
#define IOAPIC_SIZE 0x1000
//
// Chipset configuration registers RCBA - "Root Complex Base Address" (D31:F0:RF0h)
// Suggested Value for RCBA = 0xFED1C000
//
#define R_QNC_RCRB_SPIBASE 0x3020 // SPI (Serial Peripheral Interface) in RCRB
#define R_QNC_RCRB_SPIS (R_QNC_RCRB_SPIBASE + 0x00) // SPI Status
#define B_QNC_RCRB_SPIS_SCL (BIT15) // SPI Configuration Lockdown
#define B_QNC_RCRB_SPIS_BAS (BIT3) // Blocked Access Status
#define B_QNC_RCRB_SPIS_CDS (BIT2) // Cycle Done Status
#define B_QNC_RCRB_SPIS_SCIP (BIT0) // SPI Cycle in Progress
#define R_QNC_RCRB_SPIC (R_QNC_RCRB_SPIBASE + 0x02) // SPI Control
#define B_QNC_RCRB_SPIC_DC (BIT14) // SPI Data Cycle Enable
#define B_QNC_RCRB_SPIC_DBC 0x3F00 // SPI Data Byte Count (1..8,16,24,32,40,48,56,64)
#define B_QNC_RCRB_SPIC_COP (BIT6+BIT5+BIT4) // SPI Cycle Opcode Pointer
#define B_QNC_RCRB_SPIC_SPOP (BIT3) // Sequence Prefix Opcode Pointer
#define B_QNC_RCRB_SPIC_ACS (BIT2) // SPI Atomic Cycle Sequence
#define B_QNC_RCRB_SPIC_SCGO (BIT1) // SPI Cycle Go
#define R_QNC_RCRB_SPIA (R_QNC_RCRB_SPIBASE + 0x04) // SPI Address
#define B_QNC_RCRB_SPIA_MASK 0x00FFFFFF // SPI Address mask
#define R_QNC_RCRB_SPID0 (R_QNC_RCRB_SPIBASE + 0x08) // SPI Data 0
#define R_QNC_RCRB_SPIPREOP (R_QNC_RCRB_SPIBASE + 0x54) // Prefix Opcode Configuration
#define R_QNC_RCRB_SPIOPTYPE (R_QNC_RCRB_SPIBASE + 0x56) // Opcode Type Configuration
#define B_QNC_RCRB_SPIOPTYPE_NOADD_READ 0
#define B_QNC_RCRB_SPIOPTYPE_NOADD_WRITE (BIT0)
#define B_QNC_RCRB_SPIOPTYPE_ADD_READ (BIT1)
#define B_QNC_RCRB_SPIOPTYPE_ADD_WRITE (BIT0 + BIT1)
#define R_QNC_RCRB_SPIOPMENU (R_QNC_RCRB_SPIBASE + 0x58) // Opcode Menu Configuration //R_OPMENU
#define R_QNC_RCRB_SPIPBR0 (R_QNC_RCRB_SPIBASE + 0x60) // Protected BIOS Range 0.
#define R_QNC_RCRB_SPIPBR1 (R_QNC_RCRB_SPIBASE + 0x64) // Protected BIOS Range 1.
#define R_QNC_RCRB_SPIPBR2 (R_QNC_RCRB_SPIBASE + 0x68) // Protected BIOS Range 2.
#define B_QNC_RCRB_SPIPBRn_WPE (BIT31) // Write Protection Enable for above 3 registers.
#define R_QNC_RCRB_AGENT0IR 0x3140 // AGENT0 interrupt route
#define R_QNC_RCRB_AGENT1IR 0x3142 // AGENT1 interrupt route
#define R_QNC_RCRB_AGENT2IR 0x3144 // AGENT2 interrupt route
#define R_QNC_RCRB_AGENT3IR 0x3146 // AGENT3 interrupt route
#endif
Reference in New Issue View Git Blame Copy Permalink