audk/MdePkg/Include/Protocol/SimpleTextInEx.h

319 lines
11 KiB
C

/** @file
The file defines the protocol to obtain input from the
ConsoleIn device. The EFI specification requires that the
EFI_SIMPLE_TEXT_INPUT_PROTOCOL supports the same languages as
the corresponding
Copyright (c) 2006 - 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name: SimpleTextInEx.h
**/
#ifndef __SIMPLE_TEXT_IN_EX_H__
#define __SIMPLE_TEXT_IN_EX_H__
#define EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL_GUID \
{0xdd9e7534, 0x7762, 0x4698, { 0x8c, 0x14, 0xf5, 0x85, 0x17, 0xa6, 0x25, 0xaa } }
typedef struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL;
/**
The Reset() function resets the input device hardware. As part
of initialization process, the firmware/device will make a quick
but reasonable attempt to verify that the device is functioning.
If the ExtendedVerification flag is TRUE the firmware may take
an extended amount of time to verify the device is operating on
reset. Otherwise the reset operation is to occur as quickly as
possible. The hardware verification process is not defined by
this specification and is left up to the platform firmware or
driver to implement.
@param This A pointer to the EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX
instance. Type EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX
is defined in this section.
@param ExtendedVerification Indicates that the driver may
perform a more exhaustive
verification operation of the
device during reset.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning
correctly and could not be reset.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_INPUT_RESET_EX) (
IN CONST EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
IN CONST BOOLEAN ExtendedVerification
);
//
// EFI_KEY_TOGGLE_STATE
//
typedef UINT8 EFI_KEY_TOGGLE_STATE;
#define TOGGLE_STATE_VALID 0x80
#define SCROLL_LOCK_ACTIVE 0x01
#define NUM_LOCK_ACTIVE 0x02
#define CAPS_LOCK_ACTIVE 0x04
/**
Definition of EFI_KEY_STATE
@param KeyShiftState Reflects the currently pressed shift
modifiers for the input device. The
returned value is valid only if the high
order bit has been set.
@param KeyToggleState Reflects the current internal state of
various toggled attributes. The returned
value is valid only if the high order
bit has been set.
**/
typedef struct _EFI_KEY_STATE {
UINT32 KeyShiftState;
EFI_KEY_TOGGLE_STATE KeyToggleState;
} EFI_KEY_STATE;
/**
Definition of EFI_KEY_DATA.
@param Key The EFI scan code and Unicode value returned from
the input device.
@param KeyState The current state of various toggled
attributes as well as input modifier values.
**/
typedef struct {
EFI_INPUT_KEY Key;
EFI_KEY_STATE KeyState;
} EFI_KEY_DATA;
//
// Shift State.
//
// Any Shift or Toggle State that is valid should have
// high order bit set.
//
#define SHIFT_STATE_VALID 0x80000000
#define RIGHT_SHIFT_PRESSED 0x00000001
#define LEFT_SHIFT_PRESSED 0x00000002
#define RIGHT_CONTROL_PRESSED 0x00000004
#define LEFT_CONTROL_PRESSED 0x00000008
#define RIGHT_ALT_PRESSED 0x00000010
#define LEFT_ALT_PRESSED 0x00000020
#define RIGHT_LOGO_PRESSED 0x00000040
#define LEFT_LOGO_PRESSED 0x00000080
#define MENU_KEY_PRESSED 0x00000100
#define SYS_REQ_PRESSED 0x00000200
/**
The function reads the next keystroke from the input device. If
there is no pending keystroke the function returns
EFI_NOT_READY. If there is a pending keystroke, then
KeyData.Key.ScanCode is the EFI scan code defined in Error!
Reference source not found.. The KeyData.Key.UnicodeChar is the
actual printable character or is zero if the key does not
represent a printable character (control key, function key,
etc.). The KeyData.KeyState is shift state for the character
reflected in KeyData.Key.UnicodeChar or KeyData.Key.ScanCode .
When interpreting the data from this function, it should be
noted that if a class of printable characters that are
normally adjusted by shift modifiers (e.g. Shift Key + "f"
key) would be presented solely as a KeyData.Key.UnicodeChar
without the associated shift state. So in the previous example
of a Shift Key + "f" key being pressed, the only pertinent
data returned would be KeyData.Key.UnicodeChar with the value
of "F". This of course would not typically be the case for
non-printable characters such as the pressing of the Right
Shift Key + F10 key since the corresponding returned data
would be reflected both in the KeyData.KeyState.KeyShiftState
and KeyData.Key.ScanCode values. UEFI drivers which implement
the EFI_SIMPLE_TEXT_INPUT_EX protocol are required to return
KeyData.Key and KeyData.KeyState values. These drivers must
always return the most current state of
KeyData.KeyState.KeyShiftState and
KeyData.KeyState.KeyToggleState. It should also be noted that
certain input devices may not be able to produce shift or toggle
state information, and in those cases the high order bit in the
respective Toggle and Shift state fields should not be active.
@param This A pointer to the
EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX instance.
@param KeyData A pointer to a buffer that is filled in with
the keystroke state data for the key that was
pressed.
@retval EFI_SUCCESS The keystroke information was
returned.
@retval EFI_NOT_READY There was no keystroke data available.
EFI_DEVICE_ERROR The keystroke
information was not returned due to
hardware errors.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_INPUT_READ_KEY_EX) (
IN CONST EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
OUT EFI_KEY_DATA *KeyData
);
/**
The SetState() function allows the input device hardware to
have state settings adjusted.
@param This A pointer to the EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX
instance. Type EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX
is defined in this section.
@param KeyToggleState Pointer to the EFI_KEY_TOGGLE_STATE to
set the state for the input device.
@retval EFI_SUCCESS The device state was set appropriately.
@retval EFI_DEVICE_ERROR The device is not functioning
correctly and could not have the
setting adjusted.
@retval EFI_UNSUPPORTED The device does not support the
ability to have its state set.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SET_STATE) (
IN CONST EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
IN CONST EFI_KEY_TOGGLE_STATE *KeyToggleState
);
//
// EFI_KEY_NOTIFY
//
typedef
EFI_STATUS
(EFIAPI *EFI_KEY_NOTIFY_FUNCTION) (
IN CONST EFI_KEY_DATA *KeyData
);
/**
The RegisterKeystrokeNotify() function registers a function
which will be called when a specified keystroke will occur.
@param This A pointer to the EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX
instance. Type EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX
is defined in this section.
@param KeyData A pointer to a buffer that is filled in with
the keystroke information for the key that was
pressed.
@param KeyNotificationFunction Points to the function to be
called when the key sequence
is typed specified by KeyData.
@param NotifyHandle Points to the unique handle assigned to
the registered notification.
@retval EFI_SUCCESS The device state was set
appropriately.
@retval EFI_OUT_OF_RESOURCES Unable to allocate necessary
data structures.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_REGISTER_KEYSTROKE_NOTIFY) (
IN CONST EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
IN CONST EFI_KEY_DATA *KeyData,
IN CONST EFI_KEY_NOTIFY_FUNCTION KeyNotificationFunction,
OUT EFI_HANDLE *NotifyHandle
);
/**
The UnregisterKeystrokeNotify() function removes the
notification which was previously registered.
@param This A pointer to the EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX
instance.
@param NotificationHandle The handle of the notification
function being unregistered.
@retval EFI_SUCCESS The device state was set appropriately.
@retval EFI_INVALID_PARAMETER The NotificationHandle is
invalid.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_UNREGISTER_KEYSTROKE_NOTIFY) (
IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
IN EFI_HANDLE NotificationHandle
);
/**
The EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL is used on the ConsoleIn
device. It is an extension to the Simple Text Input protocol
which allows a variety of extended shift state information to be
returned.
@param Reset Reset the ConsoleIn device. See Reset().
@param ReadKeyStrokeEx Returns the next input character. See
ReadKeyStrokeEx().
@param WaitForKeyEx Event to use with WaitForEvent() to wait
for a key to be available.
@param SetState Set the EFI_KEY_TOGGLE_STATE state settings
for the input device.
@param RegisterKeyNotify Register a notification function to
be called when a given key sequence
is hit.
@param UnregisterKeyNotifyRemoves A specific notification
function.
**/
struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL{
EFI_INPUT_RESET_EX Reset;
EFI_INPUT_READ_KEY_EX ReadKeyStrokeEx;
EFI_EVENT WaitForKeyEx;
EFI_SET_STATE SetState;
EFI_REGISTER_KEYSTROKE_NOTIFY RegisterKeyNotify;
EFI_UNREGISTER_KEYSTROKE_NOTIFY UnregisterKeyNotify;
};
extern EFI_GUID gEfiSimpleTextInputExProtocolGuid;
#endif