audk/UefiCpuPkg/CpuMpPei/Ia32/MpFuncs.nasm

250 lines
7.5 KiB
NASM

;------------------------------------------------------------------------------ ;
; Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
; This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
; http://opensource.org/licenses/bsd-license.php.
;
; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
; Module Name:
;
; MpFuncs.nasm
;
; Abstract:
;
; This is the assembly code for MP support
;
;-------------------------------------------------------------------------------
%include "MpEqu.inc"
extern ASM_PFX(InitializeFloatingPointUnits)
SECTION .text
;-------------------------------------------------------------------------------------
;RendezvousFunnelProc procedure follows. All APs execute their procedure. This
;procedure serializes all the AP processors through an Init sequence. It must be
;noted that APs arrive here very raw...ie: real mode, no stack.
;ALSO THIS PROCEDURE IS EXECUTED BY APs ONLY ON 16 BIT MODE. HENCE THIS PROC
;IS IN MACHINE CODE.
;-------------------------------------------------------------------------------------
global ASM_PFX(RendezvousFunnelProc)
ASM_PFX(RendezvousFunnelProc):
RendezvousFunnelProcStart:
; At this point CS = 0x(vv00) and ip= 0x0.
BITS 16
mov ebp, eax ; save BIST information
mov ax, cs
mov ds, ax
mov es, ax
mov ss, ax
xor ax, ax
mov fs, ax
mov gs, ax
mov si, BufferStartLocation
mov ebx, [si]
mov di, PmodeOffsetLocation
mov eax, [di]
mov di, ax
sub di, 06h
add eax, ebx
mov [di],eax
mov si, GdtrLocation
o32 lgdt [cs:si]
mov si, IdtrLocation
o32 lidt [cs:si]
xor ax, ax
mov ds, ax
mov eax, cr0 ;Get control register 0
or eax, 000000003h ;Set PE bit (bit #0) & MP
mov cr0, eax
jmp PROTECT_MODE_CS:strict dword 0 ; far jump to protected mode
BITS 32
Flat32Start: ; protected mode entry point
mov ax, PROTECT_MODE_DS
mov ds, ax
mov es, ax
mov fs, ax
mov gs, ax
mov ss, ax
mov esi, ebx
mov edi, esi
add edi, LockLocation
mov eax, NotVacantFlag
TestLock:
xchg [edi], eax
cmp eax, NotVacantFlag
jz TestLock
mov edi, esi
add edi, NumApsExecutingLoction
inc dword [edi]
mov ebx, [edi]
ProgramStack:
mov edi, esi
add edi, StackSizeLocation
mov eax, [edi]
mov edi, esi
add edi, StackStartAddressLocation
add eax, [edi]
mov esp, eax
mov [edi], eax
Releaselock:
mov eax, VacantFlag
mov edi, esi
add edi, LockLocation
xchg [edi], eax
CProcedureInvoke:
push ebp ; push BIST data at top of AP stack
xor ebp, ebp ; clear ebp for call stack trace
push ebp
mov ebp, esp
mov eax, ASM_PFX(InitializeFloatingPointUnits)
call eax ; Call assembly function to initialize FPU per UEFI spec
push ebx ; Push NumApsExecuting
mov eax, esi
add eax, LockLocation
push eax ; push address of exchange info data buffer
mov edi, esi
add edi, ApProcedureLocation
mov eax, [edi]
call eax ; invoke C function
jmp $ ; never reach here
RendezvousFunnelProcEnd:
;-------------------------------------------------------------------------------------
; AsmGetAddressMap (&AddressMap);
;-------------------------------------------------------------------------------------
global ASM_PFX(AsmGetAddressMap)
ASM_PFX(AsmGetAddressMap):
pushad
mov ebp,esp
mov ebx, [ebp + 24h]
mov dword [ebx], RendezvousFunnelProcStart
mov dword [ebx + 4h], Flat32Start - RendezvousFunnelProcStart
mov dword [ebx + 8h], 0
mov dword [ebx + 0ch], RendezvousFunnelProcEnd - RendezvousFunnelProcStart
popad
ret
;-------------------------------------------------------------------------------------
;AsmExchangeRole procedure follows. This procedure executed by current BSP, that is
;about to become an AP. It switches it'stack with the current AP.
;AsmExchangeRole (IN CPU_EXCHANGE_INFO *MyInfo, IN CPU_EXCHANGE_INFO *OthersInfo);
;-------------------------------------------------------------------------------------
global ASM_PFX(AsmExchangeRole)
ASM_PFX(AsmExchangeRole):
; DO NOT call other functions in this function, since 2 CPU may use 1 stack
; at the same time. If 1 CPU try to call a function, stack will be corrupted.
pushad
mov ebp,esp
; esi contains MyInfo pointer
mov esi, [ebp + 24h]
; edi contains OthersInfo pointer
mov edi, [ebp + 28h]
;Store EFLAGS, GDTR and IDTR register to stack
pushfd
mov eax, cr4
push eax ; push cr4 firstly
mov eax, cr0
push eax
sgdt [esi + 8]
sidt [esi + 14]
; Store the its StackPointer
mov [esi + 4],esp
; update its switch state to STORED
mov byte [esi], CPU_SWITCH_STATE_STORED
WaitForOtherStored:
; wait until the other CPU finish storing its state
cmp byte [edi], CPU_SWITCH_STATE_STORED
jz OtherStored
pause
jmp WaitForOtherStored
OtherStored:
; Since another CPU already stored its state, load them
; load GDTR value
lgdt [edi + 8]
; load IDTR value
lidt [edi + 14]
; load its future StackPointer
mov esp, [edi + 4]
; update the other CPU's switch state to LOADED
mov byte [edi], CPU_SWITCH_STATE_LOADED
WaitForOtherLoaded:
; wait until the other CPU finish loading new state,
; otherwise the data in stack may corrupt
cmp byte [esi], CPU_SWITCH_STATE_LOADED
jz OtherLoaded
pause
jmp WaitForOtherLoaded
OtherLoaded:
; since the other CPU already get the data it want, leave this procedure
pop eax
mov cr0, eax
pop eax
mov cr4, eax
popfd
popad
ret
global ASM_PFX(AsmInitializeGdt)
ASM_PFX(AsmInitializeGdt):
push ebp
mov ebp, esp
pushad
mov edi, [ebp + 8] ; Load GDT register
lgdt [edi] ; and update the GDTR
push PROTECT_MODE_CS
mov eax, ASM_PFX(SetCodeSelectorFarJump)
push eax
retf
ASM_PFX(SetCodeSelectorFarJump):
mov ax, PROTECT_MODE_DS ; Update the Base for the new selectors, too
mov ds, ax
mov es, ax
mov fs, ax
mov gs, ax
mov ss, ax
popad
pop ebp
ret