mirror of https://github.com/acidanthera/audk.git
1465 lines
49 KiB
C
1465 lines
49 KiB
C
/** @file
|
|
DXE PCI Library instance layered on top of ESAL services.
|
|
|
|
Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>
|
|
This program and the accompanying materials
|
|
are licensed and made available under the terms and conditions of the BSD License
|
|
which accompanies this distribution. The full text of the license may be found at
|
|
http://opensource.org/licenses/bsd-license.php.
|
|
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
|
|
**/
|
|
|
|
#include <PiDxe.h>
|
|
|
|
#include <Protocol/ExtendedSalServiceClasses.h>
|
|
|
|
#include <Library/PciLib.h>
|
|
#include <Library/BaseLib.h>
|
|
#include <Library/DebugLib.h>
|
|
#include <Library/ExtendedSalLib.h>
|
|
|
|
/**
|
|
Assert the validity of a PCI address. A valid PCI address should contain 1's
|
|
only in the low 28 bits.
|
|
|
|
@param A The address to validate.
|
|
@param M Additional bits to assert to be zero.
|
|
|
|
**/
|
|
#define ASSERT_INVALID_PCI_ADDRESS(A,M) \
|
|
ASSERT (((A) & (~0xfffffff | (M))) == 0)
|
|
|
|
/**
|
|
Converts a PCI Library Address to a ESAL PCI Service Address.
|
|
Based on SAL Spec 3.2, there are two SAL PCI Address:
|
|
|
|
If address type = 0
|
|
Bits 0..7 - Register address
|
|
Bits 8..10 - Function number
|
|
Bits 11..15 - Device number
|
|
Bits 16..23 - Bus number
|
|
Bits 24..31 - PCI segment group
|
|
Bits 32..63 - Reserved (0)
|
|
|
|
If address type = 1
|
|
Bits 0..7 - Register address
|
|
Bits 8..11 - Extended Register address
|
|
Bits 12..14 - Function number
|
|
Bits 15..19 - Device number
|
|
Bits 20..27 - Bus number
|
|
Bits 28..43 - PCI segment group
|
|
Bits 44..63 - Reserved (0)
|
|
|
|
@param A The PCI Library Address to convert.
|
|
|
|
**/
|
|
#define CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS0(Address) ((((Address) >> 4) & 0x00ffff00) | ((Address) & 0xff))
|
|
#define CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS1(Address) (Address)
|
|
|
|
/**
|
|
Check a PCI Library Address is a PCI Compatible Address or not.
|
|
**/
|
|
#define IS_PCI_COMPATIBLE_ADDRESS(Address) (((Address) & 0xf00) == 0)
|
|
|
|
/**
|
|
Internal worker function to read a PCI configuration register.
|
|
|
|
This function wraps EsalPciConfigRead function of Extended SAL PCI
|
|
Services Class.
|
|
It reads and returns the PCI configuration register specified by Address,
|
|
the width of data is specified by Width.
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param Width Width of data to read
|
|
|
|
@return The value read from the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
DxePciLibEsalReadWorker (
|
|
IN UINTN Address,
|
|
IN UINTN Width
|
|
)
|
|
{
|
|
SAL_RETURN_REGS Return;
|
|
|
|
if (IS_PCI_COMPATIBLE_ADDRESS(Address)) {
|
|
Return = EsalCall (
|
|
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_LO,
|
|
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_HI,
|
|
SalPciConfigReadFunctionId,
|
|
CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS0 (Address),
|
|
Width,
|
|
EFI_SAL_PCI_COMPATIBLE_ADDRESS,
|
|
0,
|
|
0,
|
|
0,
|
|
0
|
|
);
|
|
} else {
|
|
Return = EsalCall (
|
|
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_LO,
|
|
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_HI,
|
|
SalPciConfigReadFunctionId,
|
|
CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS1 (Address),
|
|
Width,
|
|
EFI_SAL_PCI_EXTENDED_REGISTER_ADDRESS,
|
|
0,
|
|
0,
|
|
0,
|
|
0
|
|
);
|
|
}
|
|
|
|
return (UINT32) Return.r9;
|
|
}
|
|
|
|
/**
|
|
Internal worker function to writes a PCI configuration register.
|
|
|
|
This function wraps EsalPciConfigWrite function of Extended SAL PCI
|
|
Services Class.
|
|
It writes the PCI configuration register specified by Address with the
|
|
value specified by Data. The width of data is specified by Width.
|
|
Data is returned.
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param Width Width of data to write
|
|
@param Data The value to write.
|
|
|
|
@return The value written to the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
DxePciLibEsalWriteWorker (
|
|
IN UINTN Address,
|
|
IN UINTN Width,
|
|
IN UINT32 Data
|
|
)
|
|
{
|
|
if (IS_PCI_COMPATIBLE_ADDRESS(Address)) {
|
|
EsalCall (
|
|
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_LO,
|
|
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_HI,
|
|
SalPciConfigWriteFunctionId,
|
|
CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS0 (Address),
|
|
Width,
|
|
Data,
|
|
EFI_SAL_PCI_COMPATIBLE_ADDRESS,
|
|
0,
|
|
0,
|
|
0
|
|
);
|
|
} else {
|
|
EsalCall (
|
|
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_LO,
|
|
EFI_EXTENDED_SAL_PCI_SERVICES_PROTOCOL_GUID_HI,
|
|
SalPciConfigWriteFunctionId,
|
|
CONVERT_PCI_LIB_ADDRESS_TO_PCI_ESAL_ADDRESS1 (Address),
|
|
Width,
|
|
Data,
|
|
EFI_SAL_PCI_EXTENDED_REGISTER_ADDRESS,
|
|
0,
|
|
0,
|
|
0
|
|
);
|
|
}
|
|
|
|
return Data;
|
|
}
|
|
|
|
/**
|
|
Register a PCI device so PCI configuration registers may be accessed after
|
|
SetVirtualAddressMap().
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
|
|
@retval RETURN_SUCCESS The PCI device was registered for runtime access.
|
|
@retval RETURN_UNSUPPORTED An attempt was made to call this function
|
|
after ExitBootServices().
|
|
@retval RETURN_UNSUPPORTED The resources required to access the PCI device
|
|
at runtime could not be mapped.
|
|
@retval RETURN_OUT_OF_RESOURCES There are not enough resources available to
|
|
complete the registration.
|
|
|
|
**/
|
|
RETURN_STATUS
|
|
EFIAPI
|
|
PciRegisterForRuntimeAccess (
|
|
IN UINTN Address
|
|
)
|
|
{
|
|
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
|
|
return RETURN_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
Reads an 8-bit PCI configuration register.
|
|
|
|
Reads and returns the 8-bit PCI configuration register specified by Address.
|
|
This function must guarantee that all PCI read and write operations are
|
|
serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
|
|
@return The value read from the PCI configuration register.
|
|
|
|
**/
|
|
UINT8
|
|
EFIAPI
|
|
PciRead8 (
|
|
IN UINTN Address
|
|
)
|
|
{
|
|
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
|
|
|
|
return (UINT8) DxePciLibEsalReadWorker (Address, 1);
|
|
}
|
|
|
|
/**
|
|
Writes an 8-bit PCI configuration register.
|
|
|
|
Writes the 8-bit PCI configuration register specified by Address with the
|
|
value specified by Value. Value is returned. This function must guarantee
|
|
that all PCI read and write operations are serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param Data The value to write.
|
|
|
|
@return The value written to the PCI configuration register.
|
|
|
|
**/
|
|
UINT8
|
|
EFIAPI
|
|
PciWrite8 (
|
|
IN UINTN Address,
|
|
IN UINT8 Data
|
|
)
|
|
{
|
|
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
|
|
|
|
return (UINT8) DxePciLibEsalWriteWorker (Address, 1, Data);
|
|
}
|
|
|
|
/**
|
|
Performs a bitwise OR of an 8-bit PCI configuration register with
|
|
an 8-bit value.
|
|
|
|
Reads the 8-bit PCI configuration register specified by Address, performs a
|
|
bitwise OR between the read result and the value specified by
|
|
OrData, and writes the result to the 8-bit PCI configuration register
|
|
specified by Address. The value written to the PCI configuration register is
|
|
returned. This function must guarantee that all PCI read and write operations
|
|
are serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param OrData The value to OR with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT8
|
|
EFIAPI
|
|
PciOr8 (
|
|
IN UINTN Address,
|
|
IN UINT8 OrData
|
|
)
|
|
{
|
|
return PciWrite8 (Address, (UINT8)(PciRead8 (Address) | OrData));
|
|
}
|
|
|
|
/**
|
|
Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
|
|
value.
|
|
|
|
Reads the 8-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND between the read result and the value specified by AndData, and
|
|
writes the result to the 8-bit PCI configuration register specified by
|
|
Address. The value written to the PCI configuration register is returned.
|
|
This function must guarantee that all PCI read and write operations are
|
|
serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT8
|
|
EFIAPI
|
|
PciAnd8 (
|
|
IN UINTN Address,
|
|
IN UINT8 AndData
|
|
)
|
|
{
|
|
return PciWrite8 (Address, (UINT8)(PciRead8 (Address) & AndData));
|
|
}
|
|
|
|
/**
|
|
Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
|
|
value, followed a bitwise OR with another 8-bit value.
|
|
|
|
Reads the 8-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND between the read result and the value specified by AndData,
|
|
performs a bitwise OR between the result of the AND operation and
|
|
the value specified by OrData, and writes the result to the 8-bit PCI
|
|
configuration register specified by Address. The value written to the PCI
|
|
configuration register is returned. This function must guarantee that all PCI
|
|
read and write operations are serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
@param OrData The value to OR with the result of the AND operation.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT8
|
|
EFIAPI
|
|
PciAndThenOr8 (
|
|
IN UINTN Address,
|
|
IN UINT8 AndData,
|
|
IN UINT8 OrData
|
|
)
|
|
{
|
|
return PciWrite8 (Address, (UINT8)((PciRead8 (Address) & AndData) | OrData));
|
|
}
|
|
|
|
/**
|
|
Reads a bit field of a PCI configuration register.
|
|
|
|
Reads the bit field in an 8-bit PCI configuration register. The bit field is
|
|
specified by the StartBit and the EndBit. The value of the bit field is
|
|
returned.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If StartBit is greater than 7, then ASSERT().
|
|
If EndBit is greater than 7, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to read.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..7.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..7.
|
|
|
|
@return The value of the bit field read from the PCI configuration register.
|
|
|
|
**/
|
|
UINT8
|
|
EFIAPI
|
|
PciBitFieldRead8 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit
|
|
)
|
|
{
|
|
return BitFieldRead8 (PciRead8 (Address), StartBit, EndBit);
|
|
}
|
|
|
|
/**
|
|
Writes a bit field to a PCI configuration register.
|
|
|
|
Writes Value to the bit field of the PCI configuration register. The bit
|
|
field is specified by the StartBit and the EndBit. All other bits in the
|
|
destination PCI configuration register are preserved. The new value of the
|
|
8-bit register is returned.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If StartBit is greater than 7, then ASSERT().
|
|
If EndBit is greater than 7, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..7.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..7.
|
|
@param Value New value of the bit field.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT8
|
|
EFIAPI
|
|
PciBitFieldWrite8 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT8 Value
|
|
)
|
|
{
|
|
return PciWrite8 (
|
|
Address,
|
|
BitFieldWrite8 (PciRead8 (Address), StartBit, EndBit, Value)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
|
|
writes the result back to the bit field in the 8-bit port.
|
|
|
|
Reads the 8-bit PCI configuration register specified by Address, performs a
|
|
bitwise OR between the read result and the value specified by
|
|
OrData, and writes the result to the 8-bit PCI configuration register
|
|
specified by Address. The value written to the PCI configuration register is
|
|
returned. This function must guarantee that all PCI read and write operations
|
|
are serialized. Extra left bits in OrData are stripped.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If StartBit is greater than 7, then ASSERT().
|
|
If EndBit is greater than 7, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..7.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..7.
|
|
@param OrData The value to OR with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT8
|
|
EFIAPI
|
|
PciBitFieldOr8 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT8 OrData
|
|
)
|
|
{
|
|
return PciWrite8 (
|
|
Address,
|
|
BitFieldOr8 (PciRead8 (Address), StartBit, EndBit, OrData)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
|
|
AND, and writes the result back to the bit field in the 8-bit register.
|
|
|
|
Reads the 8-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND between the read result and the value specified by AndData, and
|
|
writes the result to the 8-bit PCI configuration register specified by
|
|
Address. The value written to the PCI configuration register is returned.
|
|
This function must guarantee that all PCI read and write operations are
|
|
serialized. Extra left bits in AndData are stripped.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If StartBit is greater than 7, then ASSERT().
|
|
If EndBit is greater than 7, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..7.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..7.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT8
|
|
EFIAPI
|
|
PciBitFieldAnd8 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT8 AndData
|
|
)
|
|
{
|
|
return PciWrite8 (
|
|
Address,
|
|
BitFieldAnd8 (PciRead8 (Address), StartBit, EndBit, AndData)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
|
|
bitwise OR, and writes the result back to the bit field in the
|
|
8-bit port.
|
|
|
|
Reads the 8-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND followed by a bitwise OR between the read result and
|
|
the value specified by AndData, and writes the result to the 8-bit PCI
|
|
configuration register specified by Address. The value written to the PCI
|
|
configuration register is returned. This function must guarantee that all PCI
|
|
read and write operations are serialized. Extra left bits in both AndData and
|
|
OrData are stripped.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If StartBit is greater than 7, then ASSERT().
|
|
If EndBit is greater than 7, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..7.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..7.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
@param OrData The value to OR with the result of the AND operation.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT8
|
|
EFIAPI
|
|
PciBitFieldAndThenOr8 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT8 AndData,
|
|
IN UINT8 OrData
|
|
)
|
|
{
|
|
return PciWrite8 (
|
|
Address,
|
|
BitFieldAndThenOr8 (PciRead8 (Address), StartBit, EndBit, AndData, OrData)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a 16-bit PCI configuration register.
|
|
|
|
Reads and returns the 16-bit PCI configuration register specified by Address.
|
|
This function must guarantee that all PCI read and write operations are
|
|
serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 16-bit boundary, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
|
|
@return The value read from the PCI configuration register.
|
|
|
|
**/
|
|
UINT16
|
|
EFIAPI
|
|
PciRead16 (
|
|
IN UINTN Address
|
|
)
|
|
{
|
|
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
|
|
|
|
return (UINT16) DxePciLibEsalReadWorker (Address, 2);
|
|
}
|
|
|
|
/**
|
|
Writes a 16-bit PCI configuration register.
|
|
|
|
Writes the 16-bit PCI configuration register specified by Address with the
|
|
value specified by Value. Value is returned. This function must guarantee
|
|
that all PCI read and write operations are serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 16-bit boundary, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param Data The value to write.
|
|
|
|
@return The value written to the PCI configuration register.
|
|
|
|
**/
|
|
UINT16
|
|
EFIAPI
|
|
PciWrite16 (
|
|
IN UINTN Address,
|
|
IN UINT16 Data
|
|
)
|
|
{
|
|
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
|
|
|
|
return (UINT16) DxePciLibEsalWriteWorker (Address, 2, Data);
|
|
}
|
|
|
|
/**
|
|
Performs a bitwise OR of a 16-bit PCI configuration register with
|
|
a 16-bit value.
|
|
|
|
Reads the 16-bit PCI configuration register specified by Address, performs a
|
|
bitwise OR between the read result and the value specified by
|
|
OrData, and writes the result to the 16-bit PCI configuration register
|
|
specified by Address. The value written to the PCI configuration register is
|
|
returned. This function must guarantee that all PCI read and write operations
|
|
are serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 16-bit boundary, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param OrData The value to OR with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT16
|
|
EFIAPI
|
|
PciOr16 (
|
|
IN UINTN Address,
|
|
IN UINT16 OrData
|
|
)
|
|
{
|
|
return PciWrite16 (Address, (UINT16)(PciRead16 (Address) | OrData));
|
|
}
|
|
|
|
/**
|
|
Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
|
|
value.
|
|
|
|
Reads the 16-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND between the read result and the value specified by AndData, and
|
|
writes the result to the 16-bit PCI configuration register specified by
|
|
Address. The value written to the PCI configuration register is returned.
|
|
This function must guarantee that all PCI read and write operations are
|
|
serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 16-bit boundary, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT16
|
|
EFIAPI
|
|
PciAnd16 (
|
|
IN UINTN Address,
|
|
IN UINT16 AndData
|
|
)
|
|
{
|
|
return PciWrite16 (Address, (UINT16)(PciRead16 (Address) & AndData));
|
|
}
|
|
|
|
/**
|
|
Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
|
|
value, followed a bitwise OR with another 16-bit value.
|
|
|
|
Reads the 16-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND between the read result and the value specified by AndData,
|
|
performs a bitwise OR between the result of the AND operation and
|
|
the value specified by OrData, and writes the result to the 16-bit PCI
|
|
configuration register specified by Address. The value written to the PCI
|
|
configuration register is returned. This function must guarantee that all PCI
|
|
read and write operations are serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 16-bit boundary, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
@param OrData The value to OR with the result of the AND operation.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT16
|
|
EFIAPI
|
|
PciAndThenOr16 (
|
|
IN UINTN Address,
|
|
IN UINT16 AndData,
|
|
IN UINT16 OrData
|
|
)
|
|
{
|
|
return PciWrite16 (Address, (UINT16)((PciRead16 (Address) & AndData) | OrData));
|
|
}
|
|
|
|
/**
|
|
Reads a bit field of a PCI configuration register.
|
|
|
|
Reads the bit field in a 16-bit PCI configuration register. The bit field is
|
|
specified by the StartBit and the EndBit. The value of the bit field is
|
|
returned.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 16-bit boundary, then ASSERT().
|
|
If StartBit is greater than 15, then ASSERT().
|
|
If EndBit is greater than 15, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to read.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..15.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..15.
|
|
|
|
@return The value of the bit field read from the PCI configuration register.
|
|
|
|
**/
|
|
UINT16
|
|
EFIAPI
|
|
PciBitFieldRead16 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit
|
|
)
|
|
{
|
|
return BitFieldRead16 (PciRead16 (Address), StartBit, EndBit);
|
|
}
|
|
|
|
/**
|
|
Writes a bit field to a PCI configuration register.
|
|
|
|
Writes Value to the bit field of the PCI configuration register. The bit
|
|
field is specified by the StartBit and the EndBit. All other bits in the
|
|
destination PCI configuration register are preserved. The new value of the
|
|
16-bit register is returned.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 16-bit boundary, then ASSERT().
|
|
If StartBit is greater than 15, then ASSERT().
|
|
If EndBit is greater than 15, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..15.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..15.
|
|
@param Value New value of the bit field.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT16
|
|
EFIAPI
|
|
PciBitFieldWrite16 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT16 Value
|
|
)
|
|
{
|
|
return PciWrite16 (
|
|
Address,
|
|
BitFieldWrite16 (PciRead16 (Address), StartBit, EndBit, Value)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and
|
|
writes the result back to the bit field in the 16-bit port.
|
|
|
|
Reads the 16-bit PCI configuration register specified by Address, performs a
|
|
bitwise OR between the read result and the value specified by
|
|
OrData, and writes the result to the 16-bit PCI configuration register
|
|
specified by Address. The value written to the PCI configuration register is
|
|
returned. This function must guarantee that all PCI read and write operations
|
|
are serialized. Extra left bits in OrData are stripped.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 16-bit boundary, then ASSERT().
|
|
If StartBit is greater than 15, then ASSERT().
|
|
If EndBit is greater than 15, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..15.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..15.
|
|
@param OrData The value to OR with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT16
|
|
EFIAPI
|
|
PciBitFieldOr16 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT16 OrData
|
|
)
|
|
{
|
|
return PciWrite16 (
|
|
Address,
|
|
BitFieldOr16 (PciRead16 (Address), StartBit, EndBit, OrData)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a bit field in a 16-bit PCI configuration register, performs a bitwise
|
|
AND, and writes the result back to the bit field in the 16-bit register.
|
|
|
|
Reads the 16-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND between the read result and the value specified by AndData, and
|
|
writes the result to the 16-bit PCI configuration register specified by
|
|
Address. The value written to the PCI configuration register is returned.
|
|
This function must guarantee that all PCI read and write operations are
|
|
serialized. Extra left bits in AndData are stripped.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 16-bit boundary, then ASSERT().
|
|
If StartBit is greater than 15, then ASSERT().
|
|
If EndBit is greater than 15, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..15.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..15.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT16
|
|
EFIAPI
|
|
PciBitFieldAnd16 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT16 AndData
|
|
)
|
|
{
|
|
return PciWrite16 (
|
|
Address,
|
|
BitFieldAnd16 (PciRead16 (Address), StartBit, EndBit, AndData)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
|
|
bitwise OR, and writes the result back to the bit field in the
|
|
16-bit port.
|
|
|
|
Reads the 16-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND followed by a bitwise OR between the read result and
|
|
the value specified by AndData, and writes the result to the 16-bit PCI
|
|
configuration register specified by Address. The value written to the PCI
|
|
configuration register is returned. This function must guarantee that all PCI
|
|
read and write operations are serialized. Extra left bits in both AndData and
|
|
OrData are stripped.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 16-bit boundary, then ASSERT().
|
|
If StartBit is greater than 15, then ASSERT().
|
|
If EndBit is greater than 15, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..15.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..15.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
@param OrData The value to OR with the result of the AND operation.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT16
|
|
EFIAPI
|
|
PciBitFieldAndThenOr16 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT16 AndData,
|
|
IN UINT16 OrData
|
|
)
|
|
{
|
|
return PciWrite16 (
|
|
Address,
|
|
BitFieldAndThenOr16 (PciRead16 (Address), StartBit, EndBit, AndData, OrData)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a 32-bit PCI configuration register.
|
|
|
|
Reads and returns the 32-bit PCI configuration register specified by Address.
|
|
This function must guarantee that all PCI read and write operations are
|
|
serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 32-bit boundary, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
|
|
@return The value read from the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
EFIAPI
|
|
PciRead32 (
|
|
IN UINTN Address
|
|
)
|
|
{
|
|
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
|
|
|
|
return DxePciLibEsalReadWorker (Address, 4);
|
|
}
|
|
|
|
/**
|
|
Writes a 32-bit PCI configuration register.
|
|
|
|
Writes the 32-bit PCI configuration register specified by Address with the
|
|
value specified by Value. Value is returned. This function must guarantee
|
|
that all PCI read and write operations are serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 32-bit boundary, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param Data The value to write.
|
|
|
|
@return The value written to the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
EFIAPI
|
|
PciWrite32 (
|
|
IN UINTN Address,
|
|
IN UINT32 Data
|
|
)
|
|
{
|
|
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
|
|
|
|
return DxePciLibEsalWriteWorker (Address, 4, Data);
|
|
}
|
|
|
|
/**
|
|
Performs a bitwise OR of a 32-bit PCI configuration register with
|
|
a 32-bit value.
|
|
|
|
Reads the 32-bit PCI configuration register specified by Address, performs a
|
|
bitwise OR between the read result and the value specified by
|
|
OrData, and writes the result to the 32-bit PCI configuration register
|
|
specified by Address. The value written to the PCI configuration register is
|
|
returned. This function must guarantee that all PCI read and write operations
|
|
are serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 32-bit boundary, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param OrData The value to OR with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
EFIAPI
|
|
PciOr32 (
|
|
IN UINTN Address,
|
|
IN UINT32 OrData
|
|
)
|
|
{
|
|
return PciWrite32 (Address, PciRead32 (Address) | OrData);
|
|
}
|
|
|
|
/**
|
|
Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
|
|
value.
|
|
|
|
Reads the 32-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND between the read result and the value specified by AndData, and
|
|
writes the result to the 32-bit PCI configuration register specified by
|
|
Address. The value written to the PCI configuration register is returned.
|
|
This function must guarantee that all PCI read and write operations are
|
|
serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 32-bit boundary, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
EFIAPI
|
|
PciAnd32 (
|
|
IN UINTN Address,
|
|
IN UINT32 AndData
|
|
)
|
|
{
|
|
return PciWrite32 (Address, PciRead32 (Address) & AndData);
|
|
}
|
|
|
|
/**
|
|
Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
|
|
value, followed a bitwise OR with another 32-bit value.
|
|
|
|
Reads the 32-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND between the read result and the value specified by AndData,
|
|
performs a bitwise OR between the result of the AND operation and
|
|
the value specified by OrData, and writes the result to the 32-bit PCI
|
|
configuration register specified by Address. The value written to the PCI
|
|
configuration register is returned. This function must guarantee that all PCI
|
|
read and write operations are serialized.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 32-bit boundary, then ASSERT().
|
|
|
|
@param Address Address that encodes the PCI Bus, Device, Function and
|
|
Register.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
@param OrData The value to OR with the result of the AND operation.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
EFIAPI
|
|
PciAndThenOr32 (
|
|
IN UINTN Address,
|
|
IN UINT32 AndData,
|
|
IN UINT32 OrData
|
|
)
|
|
{
|
|
return PciWrite32 (Address, (PciRead32 (Address) & AndData) | OrData);
|
|
}
|
|
|
|
/**
|
|
Reads a bit field of a PCI configuration register.
|
|
|
|
Reads the bit field in a 32-bit PCI configuration register. The bit field is
|
|
specified by the StartBit and the EndBit. The value of the bit field is
|
|
returned.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 32-bit boundary, then ASSERT().
|
|
If StartBit is greater than 31, then ASSERT().
|
|
If EndBit is greater than 31, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to read.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..31.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..31.
|
|
|
|
@return The value of the bit field read from the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
EFIAPI
|
|
PciBitFieldRead32 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit
|
|
)
|
|
{
|
|
return BitFieldRead32 (PciRead32 (Address), StartBit, EndBit);
|
|
}
|
|
|
|
/**
|
|
Writes a bit field to a PCI configuration register.
|
|
|
|
Writes Value to the bit field of the PCI configuration register. The bit
|
|
field is specified by the StartBit and the EndBit. All other bits in the
|
|
destination PCI configuration register are preserved. The new value of the
|
|
32-bit register is returned.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 32-bit boundary, then ASSERT().
|
|
If StartBit is greater than 31, then ASSERT().
|
|
If EndBit is greater than 31, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..31.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..31.
|
|
@param Value New value of the bit field.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
EFIAPI
|
|
PciBitFieldWrite32 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT32 Value
|
|
)
|
|
{
|
|
return PciWrite32 (
|
|
Address,
|
|
BitFieldWrite32 (PciRead32 (Address), StartBit, EndBit, Value)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
|
|
writes the result back to the bit field in the 32-bit port.
|
|
|
|
Reads the 32-bit PCI configuration register specified by Address, performs a
|
|
bitwise OR between the read result and the value specified by
|
|
OrData, and writes the result to the 32-bit PCI configuration register
|
|
specified by Address. The value written to the PCI configuration register is
|
|
returned. This function must guarantee that all PCI read and write operations
|
|
are serialized. Extra left bits in OrData are stripped.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 32-bit boundary, then ASSERT().
|
|
If StartBit is greater than 31, then ASSERT().
|
|
If EndBit is greater than 31, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..31.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..31.
|
|
@param OrData The value to OR with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
EFIAPI
|
|
PciBitFieldOr32 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT32 OrData
|
|
)
|
|
{
|
|
return PciWrite32 (
|
|
Address,
|
|
BitFieldOr32 (PciRead32 (Address), StartBit, EndBit, OrData)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
|
|
AND, and writes the result back to the bit field in the 32-bit register.
|
|
|
|
Reads the 32-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND between the read result and the value specified by AndData, and
|
|
writes the result to the 32-bit PCI configuration register specified by
|
|
Address. The value written to the PCI configuration register is returned.
|
|
This function must guarantee that all PCI read and write operations are
|
|
serialized. Extra left bits in AndData are stripped.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 32-bit boundary, then ASSERT().
|
|
If StartBit is greater than 31, then ASSERT().
|
|
If EndBit is greater than 31, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..31.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..31.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
EFIAPI
|
|
PciBitFieldAnd32 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT32 AndData
|
|
)
|
|
{
|
|
return PciWrite32 (
|
|
Address,
|
|
BitFieldAnd32 (PciRead32 (Address), StartBit, EndBit, AndData)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
|
|
bitwise OR, and writes the result back to the bit field in the
|
|
32-bit port.
|
|
|
|
Reads the 32-bit PCI configuration register specified by Address, performs a
|
|
bitwise AND followed by a bitwise OR between the read result and
|
|
the value specified by AndData, and writes the result to the 32-bit PCI
|
|
configuration register specified by Address. The value written to the PCI
|
|
configuration register is returned. This function must guarantee that all PCI
|
|
read and write operations are serialized. Extra left bits in both AndData and
|
|
OrData are stripped.
|
|
|
|
If Address > 0x0FFFFFFF, then ASSERT().
|
|
If Address is not aligned on a 32-bit boundary, then ASSERT().
|
|
If StartBit is greater than 31, then ASSERT().
|
|
If EndBit is greater than 31, then ASSERT().
|
|
If EndBit is less than StartBit, then ASSERT().
|
|
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
|
|
|
|
@param Address PCI configuration register to write.
|
|
@param StartBit The ordinal of the least significant bit in the bit field.
|
|
Range 0..31.
|
|
@param EndBit The ordinal of the most significant bit in the bit field.
|
|
Range 0..31.
|
|
@param AndData The value to AND with the PCI configuration register.
|
|
@param OrData The value to OR with the result of the AND operation.
|
|
|
|
@return The value written back to the PCI configuration register.
|
|
|
|
**/
|
|
UINT32
|
|
EFIAPI
|
|
PciBitFieldAndThenOr32 (
|
|
IN UINTN Address,
|
|
IN UINTN StartBit,
|
|
IN UINTN EndBit,
|
|
IN UINT32 AndData,
|
|
IN UINT32 OrData
|
|
)
|
|
{
|
|
return PciWrite32 (
|
|
Address,
|
|
BitFieldAndThenOr32 (PciRead32 (Address), StartBit, EndBit, AndData, OrData)
|
|
);
|
|
}
|
|
|
|
/**
|
|
Reads a range of PCI configuration registers into a caller supplied buffer.
|
|
|
|
Reads the range of PCI configuration registers specified by StartAddress and
|
|
Size into the buffer specified by Buffer. This function only allows the PCI
|
|
configuration registers from a single PCI function to be read. Size is
|
|
returned. When possible 32-bit PCI configuration read cycles are used to read
|
|
from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
|
|
and 16-bit PCI configuration read cycles may be used at the beginning and the
|
|
end of the range.
|
|
|
|
If StartAddress > 0x0FFFFFFF, then ASSERT().
|
|
If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
|
|
If Size > 0 and Buffer is NULL, then ASSERT().
|
|
|
|
@param StartAddress Starting address that encodes the PCI Bus, Device,
|
|
Function and Register.
|
|
@param Size Size in bytes of the transfer.
|
|
@param Buffer Pointer to a buffer receiving the data read.
|
|
|
|
@return Size
|
|
|
|
**/
|
|
UINTN
|
|
EFIAPI
|
|
PciReadBuffer (
|
|
IN UINTN StartAddress,
|
|
IN UINTN Size,
|
|
OUT VOID *Buffer
|
|
)
|
|
{
|
|
UINTN ReturnValue;
|
|
|
|
ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0);
|
|
ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100);
|
|
|
|
if (Size == 0) {
|
|
return Size;
|
|
}
|
|
|
|
ASSERT (Buffer != NULL);
|
|
|
|
//
|
|
// Save Size for return
|
|
//
|
|
ReturnValue = Size;
|
|
|
|
if ((StartAddress & 1) != 0) {
|
|
//
|
|
// Read a byte if StartAddress is byte aligned
|
|
//
|
|
*(volatile UINT8 *)Buffer = PciRead8 (StartAddress);
|
|
StartAddress += sizeof (UINT8);
|
|
Size -= sizeof (UINT8);
|
|
Buffer = (UINT8*)Buffer + 1;
|
|
}
|
|
|
|
if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
|
|
//
|
|
// Read a word if StartAddress is word aligned
|
|
//
|
|
*(volatile UINT16 *)Buffer = PciRead16 (StartAddress);
|
|
StartAddress += sizeof (UINT16);
|
|
Size -= sizeof (UINT16);
|
|
Buffer = (UINT16*)Buffer + 1;
|
|
}
|
|
|
|
while (Size >= sizeof (UINT32)) {
|
|
//
|
|
// Read as many double words as possible
|
|
//
|
|
*(volatile UINT32 *)Buffer = PciRead32 (StartAddress);
|
|
StartAddress += sizeof (UINT32);
|
|
Size -= sizeof (UINT32);
|
|
Buffer = (UINT32*)Buffer + 1;
|
|
}
|
|
|
|
if (Size >= sizeof (UINT16)) {
|
|
//
|
|
// Read the last remaining word if exist
|
|
//
|
|
*(volatile UINT16 *)Buffer = PciRead16 (StartAddress);
|
|
StartAddress += sizeof (UINT16);
|
|
Size -= sizeof (UINT16);
|
|
Buffer = (UINT16*)Buffer + 1;
|
|
}
|
|
|
|
if (Size >= sizeof (UINT8)) {
|
|
//
|
|
// Read the last remaining byte if exist
|
|
//
|
|
*(volatile UINT8 *)Buffer = PciRead8 (StartAddress);
|
|
}
|
|
|
|
return ReturnValue;
|
|
}
|
|
|
|
/**
|
|
Copies the data in a caller supplied buffer to a specified range of PCI
|
|
configuration space.
|
|
|
|
Writes the range of PCI configuration registers specified by StartAddress and
|
|
Size from the buffer specified by Buffer. This function only allows the PCI
|
|
configuration registers from a single PCI function to be written. Size is
|
|
returned. When possible 32-bit PCI configuration write cycles are used to
|
|
write from StartAdress to StartAddress + Size. Due to alignment restrictions,
|
|
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
|
|
and the end of the range.
|
|
|
|
If StartAddress > 0x0FFFFFFF, then ASSERT().
|
|
If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
|
|
If Size > 0 and Buffer is NULL, then ASSERT().
|
|
|
|
@param StartAddress Starting address that encodes the PCI Bus, Device,
|
|
Function and Register.
|
|
@param Size Size in bytes of the transfer.
|
|
@param Buffer Pointer to a buffer containing the data to write.
|
|
|
|
@return Size
|
|
|
|
**/
|
|
UINTN
|
|
EFIAPI
|
|
PciWriteBuffer (
|
|
IN UINTN StartAddress,
|
|
IN UINTN Size,
|
|
IN VOID *Buffer
|
|
)
|
|
{
|
|
UINTN ReturnValue;
|
|
|
|
ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0);
|
|
ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100);
|
|
|
|
if (Size == 0) {
|
|
return 0;
|
|
}
|
|
|
|
ASSERT (Buffer != NULL);
|
|
|
|
//
|
|
// Save Size for return
|
|
//
|
|
ReturnValue = Size;
|
|
|
|
if ((StartAddress & 1) != 0) {
|
|
//
|
|
// Write a byte if StartAddress is byte aligned
|
|
//
|
|
PciWrite8 (StartAddress, *(UINT8*)Buffer);
|
|
StartAddress += sizeof (UINT8);
|
|
Size -= sizeof (UINT8);
|
|
Buffer = (UINT8*)Buffer + 1;
|
|
}
|
|
|
|
if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
|
|
//
|
|
// Write a word if StartAddress is word aligned
|
|
//
|
|
PciWrite16 (StartAddress, *(UINT16*)Buffer);
|
|
StartAddress += sizeof (UINT16);
|
|
Size -= sizeof (UINT16);
|
|
Buffer = (UINT16*)Buffer + 1;
|
|
}
|
|
|
|
while (Size >= sizeof (UINT32)) {
|
|
//
|
|
// Write as many double words as possible
|
|
//
|
|
PciWrite32 (StartAddress, *(UINT32*)Buffer);
|
|
StartAddress += sizeof (UINT32);
|
|
Size -= sizeof (UINT32);
|
|
Buffer = (UINT32*)Buffer + 1;
|
|
}
|
|
|
|
if (Size >= sizeof (UINT16)) {
|
|
//
|
|
// Write the last remaining word if exist
|
|
//
|
|
PciWrite16 (StartAddress, *(UINT16*)Buffer);
|
|
StartAddress += sizeof (UINT16);
|
|
Size -= sizeof (UINT16);
|
|
Buffer = (UINT16*)Buffer + 1;
|
|
}
|
|
|
|
if (Size >= sizeof (UINT8)) {
|
|
//
|
|
// Write the last remaining byte if exist
|
|
//
|
|
PciWrite8 (StartAddress, *(UINT8*)Buffer);
|
|
}
|
|
|
|
return ReturnValue;
|
|
}
|