audk/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.h

147 lines
4.5 KiB
C

/** @file
Copyright (c) 2006 - 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
Ehci.h
Abstract:
Revision History
**/
#ifndef _EFI_EHCI_H_
#define _EFI_EHCI_H_
#include <PiDxe.h>
#include <Protocol/Usb2HostController.h>
#include <Protocol/PciIo.h>
#include <Library/DebugLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/UefiDriverEntryPoint.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Library/BaseLib.h>
#include <Library/MemoryAllocationLib.h>
#include <IndustryStandard/Pci22.h>
typedef struct _USB2_HC_DEV USB2_HC_DEV;
#include "UsbHcMem.h"
#include "EhciReg.h"
#include "EhciUrb.h"
#include "EhciSched.h"
#include "EhciDebug.h"
enum {
USB2_HC_DEV_SIGNATURE = EFI_SIGNATURE_32 ('e', 'h', 'c', 'i'),
EHC_STALL_1_MICROSECOND = 1,
EHC_STALL_1_MILLISECOND = 1000 * EHC_STALL_1_MICROSECOND,
EHC_STALL_1_SECOND = 1000 * EHC_STALL_1_MILLISECOND,
EHC_SET_PORT_RESET_TIME = 50 * EHC_STALL_1_MILLISECOND,
EHC_CLEAR_PORT_RESET_TIME = EHC_STALL_1_MILLISECOND,
EHC_GENERIC_TIME = 10 * EHC_STALL_1_MILLISECOND,
EHC_SYNC_POLL_TIME = 20 * EHC_STALL_1_MICROSECOND,
EHC_ASYNC_POLL_TIME = 50 * 10000UL, // The unit of time is 100us
EHC_TPL = TPL_NOTIFY
};
//
//Iterate through the doule linked list. NOT delete safe
//
#define EFI_LIST_FOR_EACH(Entry, ListHead) \
for(Entry = (ListHead)->ForwardLink; Entry != (ListHead); Entry = Entry->ForwardLink)
//
//Iterate through the doule linked list. This is delete-safe.
//Don't touch NextEntry
//
#define EFI_LIST_FOR_EACH_SAFE(Entry, NextEntry, ListHead) \
for(Entry = (ListHead)->ForwardLink, NextEntry = Entry->ForwardLink;\
Entry != (ListHead); Entry = NextEntry, NextEntry = Entry->ForwardLink)
#define EFI_LIST_CONTAINER(Entry, Type, Field) _CR(Entry, Type, Field)
#define EHC_LOW_32BIT(Addr64) ((UINT32)(((UINTN)(Addr64)) & 0XFFFFFFFF))
#define EHC_HIGH_32BIT(Addr64) ((UINT32)(RShiftU64((UINTN)(Addr64), 32) & 0XFFFFFFFF))
#define EHC_BIT_IS_SET(Data, Bit) ((BOOLEAN)(((Data) & (Bit)) == (Bit)))
#define EHC_REG_BIT_IS_SET(Ehc, Offset, Bit) \
(EHC_BIT_IS_SET(EhcReadOpReg ((Ehc), (Offset)), (Bit)))
#define EHC_FROM_THIS(a) CR(a, USB2_HC_DEV, Usb2Hc, USB2_HC_DEV_SIGNATURE)
struct _USB2_HC_DEV {
UINTN Signature;
EFI_USB2_HC_PROTOCOL Usb2Hc;
EFI_PCI_IO_PROTOCOL *PciIo;
USBHC_MEM_POOL *MemPool;
//
// Schedule data shared between asynchronous and periodic
// transfers:
// ShortReadStop, as its name indicates, is used to terminate
// the short read except the control transfer. EHCI follows
// the alternative next QTD point when a short read happens.
// For control transfer, even the short read happens, try the
// status stage.
//
EHC_QTD *ShortReadStop;
EFI_EVENT PollTimer;
//
// Asynchronous(bulk and control) transfer schedule data:
// ReclaimHead is used as the head of the asynchronous transfer
// list. It acts as the reclamation header.
//
EHC_QH *ReclaimHead;
//
// Peroidic (interrupt) transfer schedule data:
//
VOID *PeriodFrame; // Mapped as common buffer
VOID *PeriodFrameHost;
VOID *PeriodFrameMap;
EHC_QH *PeriodOne;
LIST_ENTRY AsyncIntTransfers;
//
// EHCI configuration data
//
UINT32 HcStructParams; // Cache of HC structure parameter, EHC_HCSPARAMS_OFFSET
UINT32 HcCapParams; // Cache of HC capability parameter, HCCPARAMS
UINT32 CapLen; // Capability length
UINT32 High32bitAddr;
//
// Misc
//
EFI_UNICODE_STRING_TABLE *ControllerNameTable;
};
extern EFI_DRIVER_BINDING_PROTOCOL gEhciDriverBinding;
extern EFI_COMPONENT_NAME_PROTOCOL gEhciComponentName;
#endif