tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/MdeModulePkg/Bus/Pci/XhciPei/XhcPeim.c

1582 lines
51 KiB
C
Raw Blame History

/** @file
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "XhcPeim.h"
//
// Two arrays used to translate the XHCI port state (change)
// to the UEFI protocol's port state (change).
//
USB_PORT_STATE_MAP mUsbPortStateMap[] = {
{XHC_PORTSC_CCS, USB_PORT_STAT_CONNECTION},
{XHC_PORTSC_PED, USB_PORT_STAT_ENABLE},
{XHC_PORTSC_OCA, USB_PORT_STAT_OVERCURRENT},
{XHC_PORTSC_PP, USB_PORT_STAT_POWER},
{XHC_PORTSC_RESET, USB_PORT_STAT_RESET}
};
USB_PORT_STATE_MAP mUsbPortChangeMap[] = {
{XHC_PORTSC_CSC, USB_PORT_STAT_C_CONNECTION},
{XHC_PORTSC_PEC, USB_PORT_STAT_C_ENABLE},
{XHC_PORTSC_OCC, USB_PORT_STAT_C_OVERCURRENT},
{XHC_PORTSC_PRC, USB_PORT_STAT_C_RESET}
};
USB_CLEAR_PORT_MAP mUsbClearPortChangeMap[] = {
{XHC_PORTSC_CSC, EfiUsbPortConnectChange},
{XHC_PORTSC_PEC, EfiUsbPortEnableChange},
{XHC_PORTSC_OCC, EfiUsbPortOverCurrentChange},
{XHC_PORTSC_PRC, EfiUsbPortResetChange}
};
USB_PORT_STATE_MAP mUsbHubPortStateMap[] = {
{XHC_HUB_PORTSC_CCS, USB_PORT_STAT_CONNECTION},
{XHC_HUB_PORTSC_PED, USB_PORT_STAT_ENABLE},
{XHC_HUB_PORTSC_OCA, USB_PORT_STAT_OVERCURRENT},
{XHC_HUB_PORTSC_PP, USB_PORT_STAT_POWER},
{XHC_HUB_PORTSC_RESET, USB_PORT_STAT_RESET}
};
USB_PORT_STATE_MAP mUsbHubPortChangeMap[] = {
{XHC_HUB_PORTSC_CSC, USB_PORT_STAT_C_CONNECTION},
{XHC_HUB_PORTSC_PEC, USB_PORT_STAT_C_ENABLE},
{XHC_HUB_PORTSC_OCC, USB_PORT_STAT_C_OVERCURRENT},
{XHC_HUB_PORTSC_PRC, USB_PORT_STAT_C_RESET}
};
USB_CLEAR_PORT_MAP mUsbHubClearPortChangeMap[] = {
{XHC_HUB_PORTSC_CSC, EfiUsbPortConnectChange},
{XHC_HUB_PORTSC_PEC, EfiUsbPortEnableChange},
{XHC_HUB_PORTSC_OCC, EfiUsbPortOverCurrentChange},
{XHC_HUB_PORTSC_PRC, EfiUsbPortResetChange},
{XHC_HUB_PORTSC_BHRC, Usb3PortBHPortResetChange}
};
/**
Read XHCI Operation register.
@param Xhc The XHCI device.
@param Offset The operation register offset.
@retval the register content read.
**/
UINT32
XhcPeiReadOpReg (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset
)
{
UINT32 Data;
ASSERT (Xhc->CapLength != 0);
Data = MmioRead32 (Xhc->UsbHostControllerBaseAddress + Xhc->CapLength + Offset);
return Data;
}
/**
Write the data to the XHCI operation register.
@param Xhc The XHCI device.
@param Offset The operation register offset.
@param Data The data to write.
**/
VOID
XhcPeiWriteOpReg (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset,
IN UINT32 Data
)
{
ASSERT (Xhc->CapLength != 0);
MmioWrite32 (Xhc->UsbHostControllerBaseAddress + Xhc->CapLength + Offset, Data);
}
/**
Set one bit of the operational register while keeping other bits.
@param Xhc The XHCI device.
@param Offset The offset of the operational register.
@param Bit The bit mask of the register to set.
**/
VOID
XhcPeiSetOpRegBit (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset,
IN UINT32 Bit
)
{
UINT32 Data;
Data = XhcPeiReadOpReg (Xhc, Offset);
Data |= Bit;
XhcPeiWriteOpReg (Xhc, Offset, Data);
}
/**
Clear one bit of the operational register while keeping other bits.
@param Xhc The XHCI device.
@param Offset The offset of the operational register.
@param Bit The bit mask of the register to clear.
**/
VOID
XhcPeiClearOpRegBit (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset,
IN UINT32 Bit
)
{
UINT32 Data;
Data = XhcPeiReadOpReg (Xhc, Offset);
Data &= ~Bit;
XhcPeiWriteOpReg (Xhc, Offset, Data);
}
/**
Wait the operation register's bit as specified by Bit
to become set (or clear).
@param Xhc The XHCI device.
@param Offset The offset of the operational register.
@param Bit The bit mask of the register to wait for.
@param WaitToSet Wait the bit to set or clear.
@param Timeout The time to wait before abort (in millisecond, ms).
@retval EFI_SUCCESS The bit successfully changed by host controller.
@retval EFI_TIMEOUT The time out occurred.
**/
EFI_STATUS
XhcPeiWaitOpRegBit (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset,
IN UINT32 Bit,
IN BOOLEAN WaitToSet,
IN UINT32 Timeout
)
{
UINT64 Index;
for (Index = 0; Index < Timeout * XHC_1_MILLISECOND; Index++) {
if (XHC_REG_BIT_IS_SET (Xhc, Offset, Bit) == WaitToSet) {
return EFI_SUCCESS;
}
MicroSecondDelay (XHC_1_MICROSECOND);
}
return EFI_TIMEOUT;
}
/**
Read XHCI capability register.
@param Xhc The XHCI device.
@param Offset Capability register address.
@retval the register content read.
**/
UINT32
XhcPeiReadCapRegister (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset
)
{
UINT32 Data;
Data = MmioRead32 (Xhc->UsbHostControllerBaseAddress + Offset);
return Data;
}
/**
Read XHCI door bell register.
@param Xhc The XHCI device.
@param Offset The offset of the door bell register.
@return The register content read
**/
UINT32
XhcPeiReadDoorBellReg (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset
)
{
UINT32 Data;
ASSERT (Xhc->DBOff != 0);
Data = MmioRead32 (Xhc->UsbHostControllerBaseAddress + Xhc->DBOff + Offset);
return Data;
}
/**
Write the data to the XHCI door bell register.
@param Xhc The XHCI device.
@param Offset The offset of the door bell register.
@param Data The data to write.
**/
VOID
XhcPeiWriteDoorBellReg (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset,
IN UINT32 Data
)
{
ASSERT (Xhc->DBOff != 0);
MmioWrite32 (Xhc->UsbHostControllerBaseAddress + Xhc->DBOff + Offset, Data);
}
/**
Read XHCI runtime register.
@param Xhc The XHCI device.
@param Offset The offset of the runtime register.
@return The register content read
**/
UINT32
XhcPeiReadRuntimeReg (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset
)
{
UINT32 Data;
ASSERT (Xhc->RTSOff != 0);
Data = MmioRead32 (Xhc->UsbHostControllerBaseAddress + Xhc->RTSOff + Offset);
return Data;
}
/**
Write the data to the XHCI runtime register.
@param Xhc The XHCI device.
@param Offset The offset of the runtime register.
@param Data The data to write.
**/
VOID
XhcPeiWriteRuntimeReg (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset,
IN UINT32 Data
)
{
ASSERT (Xhc->RTSOff != 0);
MmioWrite32 (Xhc->UsbHostControllerBaseAddress + Xhc->RTSOff + Offset, Data);
}
/**
Set one bit of the runtime register while keeping other bits.
@param Xhc The XHCI device.
@param Offset The offset of the runtime register.
@param Bit The bit mask of the register to set.
**/
VOID
XhcPeiSetRuntimeRegBit (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset,
IN UINT32 Bit
)
{
UINT32 Data;
Data = XhcPeiReadRuntimeReg (Xhc, Offset);
Data |= Bit;
XhcPeiWriteRuntimeReg (Xhc, Offset, Data);
}
/**
Clear one bit of the runtime register while keeping other bits.
@param Xhc The XHCI device.
@param Offset The offset of the runtime register.
@param Bit The bit mask of the register to set.
**/
VOID
XhcPeiClearRuntimeRegBit (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Offset,
IN UINT32 Bit
)
{
UINT32 Data;
Data = XhcPeiReadRuntimeReg (Xhc, Offset);
Data &= ~Bit;
XhcPeiWriteRuntimeReg (Xhc, Offset, Data);
}
/**
Check whether Xhc is halted.
@param Xhc The XHCI device.
@retval TRUE The controller is halted.
@retval FALSE The controller isn't halted.
**/
BOOLEAN
XhcPeiIsHalt (
IN PEI_XHC_DEV *Xhc
)
{
return XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_HALT);
}
/**
Check whether system error occurred.
@param Xhc The XHCI device.
@retval TRUE System error happened.
@retval FALSE No system error.
**/
BOOLEAN
XhcPeiIsSysError (
IN PEI_XHC_DEV *Xhc
)
{
return XHC_REG_BIT_IS_SET (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_HSE);
}
/**
Reset the host controller.
@param Xhc The XHCI device.
@param Timeout Time to wait before abort (in millisecond, ms).
@retval EFI_TIMEOUT The transfer failed due to time out.
@retval Others Failed to reset the host.
**/
EFI_STATUS
XhcPeiResetHC (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Timeout
)
{
EFI_STATUS Status;
//
// Host can only be reset when it is halt. If not so, halt it
//
if (!XhcPeiIsHalt (Xhc)) {
Status = XhcPeiHaltHC (Xhc, Timeout);
if (EFI_ERROR (Status)) {
goto ON_EXIT;
}
}
XhcPeiSetOpRegBit (Xhc, XHC_USBCMD_OFFSET, XHC_USBCMD_RESET);
//
// Some XHCI host controllers require to have extra 1ms delay before accessing any MMIO register during reset.
// Otherwise there may have the timeout case happened.
// The below is a workaround to solve such problem.
//
MicroSecondDelay (1000);
Status = XhcPeiWaitOpRegBit (Xhc, XHC_USBCMD_OFFSET, XHC_USBCMD_RESET, FALSE, Timeout);
ON_EXIT:
DEBUG ((EFI_D_INFO, "XhcPeiResetHC: %r\n", Status));
return Status;
}
/**
Halt the host controller.
@param Xhc The XHCI device.
@param Timeout Time to wait before abort.
@retval EFI_TIMEOUT Failed to halt the controller before Timeout.
@retval EFI_SUCCESS The XHCI is halt.
**/
EFI_STATUS
XhcPeiHaltHC (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Timeout
)
{
EFI_STATUS Status;
XhcPeiClearOpRegBit (Xhc, XHC_USBCMD_OFFSET, XHC_USBCMD_RUN);
Status = XhcPeiWaitOpRegBit (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_HALT, TRUE, Timeout);
DEBUG ((EFI_D_INFO, "XhcPeiHaltHC: %r\n", Status));
return Status;
}
/**
Set the XHCI to run.
@param Xhc The XHCI device.
@param Timeout Time to wait before abort.
@retval EFI_SUCCESS The XHCI is running.
@retval Others Failed to set the XHCI to run.
**/
EFI_STATUS
XhcPeiRunHC (
IN PEI_XHC_DEV *Xhc,
IN UINT32 Timeout
)
{
EFI_STATUS Status;
XhcPeiSetOpRegBit (Xhc, XHC_USBCMD_OFFSET, XHC_USBCMD_RUN);
Status = XhcPeiWaitOpRegBit (Xhc, XHC_USBSTS_OFFSET, XHC_USBSTS_HALT, FALSE, Timeout);
DEBUG ((EFI_D_INFO, "XhcPeiRunHC: %r\n", Status));
return Status;
}
/**
Submits control transfer to a target USB device.
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
@param DeviceAddress The target device address.
@param DeviceSpeed Target device speed.
@param MaximumPacketLength Maximum packet size the default control transfer
endpoint is capable of sending or receiving.
@param Request USB device request to send.
@param TransferDirection Specifies the data direction for the data stage.
@param Data Data buffer to be transmitted or received from USB device.
@param DataLength The size (in bytes) of the data buffer.
@param TimeOut Indicates the maximum timeout, in millisecond.
If Timeout is 0, then the caller must wait for the function
to be completed until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
@param Translator Transaction translator to be used by this device.
@param TransferResult Return the result of this control transfer.
@retval EFI_SUCCESS Transfer was completed successfully.
@retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources.
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
@retval EFI_TIMEOUT Transfer failed due to timeout.
@retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error.
**/
EFI_STATUS
EFIAPI
XhcPeiControlTransfer (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
IN UINT8 DeviceAddress,
IN UINT8 DeviceSpeed,
IN UINTN MaximumPacketLength,
IN EFI_USB_DEVICE_REQUEST *Request,
IN EFI_USB_DATA_DIRECTION TransferDirection,
IN OUT VOID *Data,
IN OUT UINTN *DataLength,
IN UINTN TimeOut,
IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
OUT UINT32 *TransferResult
)
{
PEI_XHC_DEV *Xhc;
URB *Urb;
UINT8 Endpoint;
UINT8 Index;
UINT8 DescriptorType;
UINT8 SlotId;
UINT8 TTT;
UINT8 MTT;
UINT32 MaxPacket0;
EFI_USB_HUB_DESCRIPTOR *HubDesc;
EFI_STATUS Status;
EFI_STATUS RecoveryStatus;
UINTN MapSize;
EFI_USB_PORT_STATUS PortStatus;
UINT32 State;
EFI_USB_DEVICE_REQUEST ClearPortRequest;
UINTN Len;
//
// Validate parameters
//
if ((Request == NULL) || (TransferResult == NULL)) {
return EFI_INVALID_PARAMETER;
}
if ((TransferDirection != EfiUsbDataIn) &&
(TransferDirection != EfiUsbDataOut) &&
(TransferDirection != EfiUsbNoData)) {
return EFI_INVALID_PARAMETER;
}
if ((TransferDirection == EfiUsbNoData) &&
((Data != NULL) || (*DataLength != 0))) {
return EFI_INVALID_PARAMETER;
}
if ((TransferDirection != EfiUsbNoData) &&
((Data == NULL) || (*DataLength == 0))) {
return EFI_INVALID_PARAMETER;
}
if ((MaximumPacketLength != 8) && (MaximumPacketLength != 16) &&
(MaximumPacketLength != 32) && (MaximumPacketLength != 64) &&
(MaximumPacketLength != 512)
) {
return EFI_INVALID_PARAMETER;
}
if ((DeviceSpeed == EFI_USB_SPEED_LOW) && (MaximumPacketLength != 8)) {
return EFI_INVALID_PARAMETER;
}
if ((DeviceSpeed == EFI_USB_SPEED_SUPER) && (MaximumPacketLength != 512)) {
return EFI_INVALID_PARAMETER;
}
Xhc = PEI_RECOVERY_USB_XHC_DEV_FROM_THIS (This);
Status = EFI_DEVICE_ERROR;
*TransferResult = EFI_USB_ERR_SYSTEM;
Len = 0;
if (XhcPeiIsHalt (Xhc) || XhcPeiIsSysError (Xhc)) {
DEBUG ((EFI_D_ERROR, "XhcPeiControlTransfer: HC is halted or has system error\n"));
goto ON_EXIT;
}
//
// Check if the device is still enabled before every transaction.
//
SlotId = XhcPeiBusDevAddrToSlotId (Xhc, DeviceAddress);
if (SlotId == 0) {
goto ON_EXIT;
}
//
// Hook the Set_Address request from UsbBus.
// According to XHCI 1.0 spec, the Set_Address request is replaced by XHCI's Address_Device cmd.
//
if ((Request->Request == USB_REQ_SET_ADDRESS) &&
(Request->RequestType == USB_REQUEST_TYPE (EfiUsbNoData, USB_REQ_TYPE_STANDARD, USB_TARGET_DEVICE))) {
//
// Reset the BusDevAddr field of all disabled entries in UsbDevContext array firstly.
// This way is used to clean the history to avoid using wrong device address afterwards.
//
for (Index = 0; Index < 255; Index++) {
if (!Xhc->UsbDevContext[Index + 1].Enabled &&
(Xhc->UsbDevContext[Index + 1].SlotId == 0) &&
(Xhc->UsbDevContext[Index + 1].BusDevAddr == (UINT8) Request->Value)) {
Xhc->UsbDevContext[Index + 1].BusDevAddr = 0;
}
}
if (Xhc->UsbDevContext[SlotId].XhciDevAddr == 0) {
goto ON_EXIT;
}
//
// The actual device address has been assigned by XHCI during initializing the device slot.
// So we just need establish the mapping relationship between the device address requested from UsbBus
// and the actual device address assigned by XHCI. The following invocations through EFI_USB2_HC_PROTOCOL interface
// can find out the actual device address by it.
//
Xhc->UsbDevContext[SlotId].BusDevAddr = (UINT8) Request->Value;
Status = EFI_SUCCESS;
goto ON_EXIT;
}
//
// Create a new URB, insert it into the asynchronous
// schedule list, then poll the execution status.
// Note that we encode the direction in address although default control
// endpoint is bidirectional. XhcPeiCreateUrb expects this
// combination of Ep addr and its direction.
//
Endpoint = (UINT8) (0 | ((TransferDirection == EfiUsbDataIn) ? 0x80 : 0));
Urb = XhcPeiCreateUrb (
Xhc,
DeviceAddress,
Endpoint,
DeviceSpeed,
MaximumPacketLength,
XHC_CTRL_TRANSFER,
Request,
Data,
*DataLength,
NULL,
NULL
);
if (Urb == NULL) {
DEBUG ((EFI_D_ERROR, "XhcPeiControlTransfer: failed to create URB"));
Status = EFI_OUT_OF_RESOURCES;
goto ON_EXIT;
}
Status = XhcPeiExecTransfer (Xhc, FALSE, Urb, TimeOut);
//
// Get the status from URB. The result is updated in XhcPeiCheckUrbResult
// which is called by XhcPeiExecTransfer
//
*TransferResult = Urb->Result;
*DataLength = Urb->Completed;
if (Status == EFI_TIMEOUT) {
//
// The transfer timed out. Abort the transfer by dequeueing of the TD.
//
RecoveryStatus = XhcPeiDequeueTrbFromEndpoint(Xhc, Urb);
if (EFI_ERROR(RecoveryStatus)) {
DEBUG((EFI_D_ERROR, "XhcPeiControlTransfer: XhcPeiDequeueTrbFromEndpoint failed\n"));
}
XhcPeiFreeUrb (Xhc, Urb);
goto ON_EXIT;
} else {
if (*TransferResult == EFI_USB_NOERROR) {
Status = EFI_SUCCESS;
} else if ((*TransferResult == EFI_USB_ERR_STALL) || (*TransferResult == EFI_USB_ERR_BABBLE)) {
RecoveryStatus = XhcPeiRecoverHaltedEndpoint(Xhc, Urb);
if (EFI_ERROR (RecoveryStatus)) {
DEBUG ((EFI_D_ERROR, "XhcPeiControlTransfer: XhcPeiRecoverHaltedEndpoint failed\n"));
}
Status = EFI_DEVICE_ERROR;
XhcPeiFreeUrb (Xhc, Urb);
goto ON_EXIT;
} else {
XhcPeiFreeUrb (Xhc, Urb);
goto ON_EXIT;
}
}
//
// Unmap data before consume.
//
XhcPeiFreeUrb (Xhc, Urb);
//
// Hook Get_Descriptor request from UsbBus as we need evaluate context and configure endpoint.
// Hook Get_Status request form UsbBus as we need trace device attach/detach event happened at hub.
// Hook Set_Config request from UsbBus as we need configure device endpoint.
//
if ((Request->Request == USB_REQ_GET_DESCRIPTOR) &&
((Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_STANDARD, USB_TARGET_DEVICE)) ||
((Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_CLASS, USB_TARGET_DEVICE))))) {
DescriptorType = (UINT8) (Request->Value >> 8);
if ((DescriptorType == USB_DESC_TYPE_DEVICE) && ((*DataLength == sizeof (EFI_USB_DEVICE_DESCRIPTOR)) || ((DeviceSpeed == EFI_USB_SPEED_FULL) && (*DataLength == 8)))) {
ASSERT (Data != NULL);
//
// Store a copy of device scriptor as hub device need this info to configure endpoint.
//
CopyMem (&Xhc->UsbDevContext[SlotId].DevDesc, Data, *DataLength);
if (Xhc->UsbDevContext[SlotId].DevDesc.BcdUSB >= 0x0300) {
//
// If it's a usb3.0 device, then its max packet size is a 2^n.
//
MaxPacket0 = 1 << Xhc->UsbDevContext[SlotId].DevDesc.MaxPacketSize0;
} else {
MaxPacket0 = Xhc->UsbDevContext[SlotId].DevDesc.MaxPacketSize0;
}
Xhc->UsbDevContext[SlotId].ConfDesc = AllocateZeroPool (Xhc->UsbDevContext[SlotId].DevDesc.NumConfigurations * sizeof (EFI_USB_CONFIG_DESCRIPTOR *));
if (Xhc->UsbDevContext[SlotId].ConfDesc == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto ON_EXIT;
}
if (Xhc->HcCParams.Data.Csz == 0) {
Status = XhcPeiEvaluateContext (Xhc, SlotId, MaxPacket0);
} else {
Status = XhcPeiEvaluateContext64 (Xhc, SlotId, MaxPacket0);
}
} else if (DescriptorType == USB_DESC_TYPE_CONFIG) {
ASSERT (Data != NULL);
if (*DataLength == ((UINT16 *) Data)[1]) {
//
// Get configuration value from request, store the configuration descriptor for Configure_Endpoint cmd.
//
Index = (UINT8) Request->Value;
ASSERT (Index < Xhc->UsbDevContext[SlotId].DevDesc.NumConfigurations);
Xhc->UsbDevContext[SlotId].ConfDesc[Index] = AllocateZeroPool (*DataLength);
if (Xhc->UsbDevContext[SlotId].ConfDesc[Index] == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto ON_EXIT;
}
CopyMem (Xhc->UsbDevContext[SlotId].ConfDesc[Index], Data, *DataLength);
}
} else if (((DescriptorType == USB_DESC_TYPE_HUB) ||
(DescriptorType == USB_DESC_TYPE_HUB_SUPER_SPEED)) && (*DataLength > 2)) {
ASSERT (Data != NULL);
HubDesc = (EFI_USB_HUB_DESCRIPTOR *) Data;
ASSERT (HubDesc->NumPorts <= 15);
//
// The bit 5,6 of HubCharacter field of Hub Descriptor is TTT.
//
TTT = (UINT8) ((HubDesc->HubCharacter & (BIT5 | BIT6)) >> 5);
if (Xhc->UsbDevContext[SlotId].DevDesc.DeviceProtocol == 2) {
//
// Don't support multi-TT feature for super speed hub now.
//
MTT = 0;
DEBUG ((EFI_D_ERROR, "XHCI: Don't support multi-TT feature for Hub now. (force to disable MTT)\n"));
} else {
MTT = 0;
}
if (Xhc->HcCParams.Data.Csz == 0) {
Status = XhcPeiConfigHubContext (Xhc, SlotId, HubDesc->NumPorts, TTT, MTT);
} else {
Status = XhcPeiConfigHubContext64 (Xhc, SlotId, HubDesc->NumPorts, TTT, MTT);
}
}
} else if ((Request->Request == USB_REQ_SET_CONFIG) &&
(Request->RequestType == USB_REQUEST_TYPE (EfiUsbNoData, USB_REQ_TYPE_STANDARD, USB_TARGET_DEVICE))) {
//
// Hook Set_Config request from UsbBus as we need configure device endpoint.
//
for (Index = 0; Index < Xhc->UsbDevContext[SlotId].DevDesc.NumConfigurations; Index++) {
if (Xhc->UsbDevContext[SlotId].ConfDesc[Index]->ConfigurationValue == (UINT8)Request->Value) {
if (Xhc->HcCParams.Data.Csz == 0) {
Status = XhcPeiSetConfigCmd (Xhc, SlotId, DeviceSpeed, Xhc->UsbDevContext[SlotId].ConfDesc[Index]);
} else {
Status = XhcPeiSetConfigCmd64 (Xhc, SlotId, DeviceSpeed, Xhc->UsbDevContext[SlotId].ConfDesc[Index]);
}
break;
}
}
} else if ((Request->Request == USB_REQ_GET_STATUS) &&
(Request->RequestType == USB_REQUEST_TYPE (EfiUsbDataIn, USB_REQ_TYPE_CLASS, USB_TARGET_OTHER))) {
ASSERT (Data != NULL);
//
// Hook Get_Status request from UsbBus to keep track of the port status change.
//
State = *(UINT32 *) Data;
PortStatus.PortStatus = 0;
PortStatus.PortChangeStatus = 0;
if (DeviceSpeed == EFI_USB_SPEED_SUPER) {
//
// For super speed hub, its bit10~12 presents the attached device speed.
//
if ((State & XHC_PORTSC_PS) >> 10 == 0) {
PortStatus.PortStatus |= USB_PORT_STAT_SUPER_SPEED;
}
} else {
//
// For high or full/low speed hub, its bit9~10 presents the attached device speed.
//
if (XHC_BIT_IS_SET (State, BIT9)) {
PortStatus.PortStatus |= USB_PORT_STAT_LOW_SPEED;
} else if (XHC_BIT_IS_SET (State, BIT10)) {
PortStatus.PortStatus |= USB_PORT_STAT_HIGH_SPEED;
}
}
//
// Convert the XHCI port/port change state to UEFI status
//
MapSize = sizeof (mUsbHubPortStateMap) / sizeof (USB_PORT_STATE_MAP);
for (Index = 0; Index < MapSize; Index++) {
if (XHC_BIT_IS_SET (State, mUsbHubPortStateMap[Index].HwState)) {
PortStatus.PortStatus = (UINT16) (PortStatus.PortStatus | mUsbHubPortStateMap[Index].UefiState);
}
}
MapSize = sizeof (mUsbHubPortChangeMap) / sizeof (USB_PORT_STATE_MAP);
for (Index = 0; Index < MapSize; Index++) {
if (XHC_BIT_IS_SET (State, mUsbHubPortChangeMap[Index].HwState)) {
PortStatus.PortChangeStatus = (UINT16) (PortStatus.PortChangeStatus | mUsbHubPortChangeMap[Index].UefiState);
}
}
MapSize = sizeof (mUsbHubClearPortChangeMap) / sizeof (USB_CLEAR_PORT_MAP);
for (Index = 0; Index < MapSize; Index++) {
if (XHC_BIT_IS_SET (State, mUsbHubClearPortChangeMap[Index].HwState)) {
ZeroMem (&ClearPortRequest, sizeof (EFI_USB_DEVICE_REQUEST));
ClearPortRequest.RequestType = USB_REQUEST_TYPE (EfiUsbNoData, USB_REQ_TYPE_CLASS, USB_TARGET_OTHER);
ClearPortRequest.Request = (UINT8) USB_REQ_CLEAR_FEATURE;
ClearPortRequest.Value = mUsbHubClearPortChangeMap[Index].Selector;
ClearPortRequest.Index = Request->Index;
ClearPortRequest.Length = 0;
XhcPeiControlTransfer (
PeiServices,
This,
DeviceAddress,
DeviceSpeed,
MaximumPacketLength,
&ClearPortRequest,
EfiUsbNoData,
NULL,
&Len,
TimeOut,
Translator,
TransferResult
);
}
}
XhcPeiPollPortStatusChange (Xhc, Xhc->UsbDevContext[SlotId].RouteString, (UINT8)Request->Index, &PortStatus);
*(UINT32 *) Data = *(UINT32 *) &PortStatus;
}
ON_EXIT:
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "XhcPeiControlTransfer: error - %r, transfer - %x\n", Status, *TransferResult));
}
return Status;
}
/**
Submits bulk transfer to a bulk endpoint of a USB device.
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
@param DeviceAddress Target device address.
@param EndPointAddress Endpoint number and its direction in bit 7.
@param DeviceSpeed Device speed, Low speed device doesn't support
bulk transfer.
@param MaximumPacketLength Maximum packet size the endpoint is capable of
sending or receiving.
@param Data Array of pointers to the buffers of data to transmit
from or receive into.
@param DataLength The lenght of the data buffer.
@param DataToggle On input, the initial data toggle for the transfer;
On output, it is updated to to next data toggle to use of
the subsequent bulk transfer.
@param TimeOut Indicates the maximum time, in millisecond, which the
transfer is allowed to complete.
If Timeout is 0, then the caller must wait for the function
to be completed until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
@param Translator A pointr to the transaction translator data.
@param TransferResult A pointer to the detailed result information of the
bulk transfer.
@retval EFI_SUCCESS The transfer was completed successfully.
@retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
@retval EFI_INVALID_PARAMETER Parameters are invalid.
@retval EFI_TIMEOUT The transfer failed due to timeout.
@retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
**/
EFI_STATUS
EFIAPI
XhcPeiBulkTransfer (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
IN UINT8 DeviceAddress,
IN UINT8 EndPointAddress,
IN UINT8 DeviceSpeed,
IN UINTN MaximumPacketLength,
IN OUT VOID *Data[EFI_USB_MAX_BULK_BUFFER_NUM],
IN OUT UINTN *DataLength,
IN OUT UINT8 *DataToggle,
IN UINTN TimeOut,
IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,
OUT UINT32 *TransferResult
)
{
PEI_XHC_DEV *Xhc;
URB *Urb;
UINT8 SlotId;
EFI_STATUS Status;
EFI_STATUS RecoveryStatus;
//
// Validate the parameters
//
if ((DataLength == NULL) || (*DataLength == 0) ||
(Data == NULL) || (Data[0] == NULL) || (TransferResult == NULL)) {
return EFI_INVALID_PARAMETER;
}
if ((*DataToggle != 0) && (*DataToggle != 1)) {
return EFI_INVALID_PARAMETER;
}
if ((DeviceSpeed == EFI_USB_SPEED_LOW) ||
((DeviceSpeed == EFI_USB_SPEED_FULL) && (MaximumPacketLength > 64)) ||
((DeviceSpeed == EFI_USB_SPEED_HIGH) && (MaximumPacketLength > 512)) ||
((DeviceSpeed == EFI_USB_SPEED_SUPER) && (MaximumPacketLength > 1024))) {
return EFI_INVALID_PARAMETER;
}
Xhc = PEI_RECOVERY_USB_XHC_DEV_FROM_THIS (This);
*TransferResult = EFI_USB_ERR_SYSTEM;
Status = EFI_DEVICE_ERROR;
if (XhcPeiIsHalt (Xhc) || XhcPeiIsSysError (Xhc)) {
DEBUG ((EFI_D_ERROR, "XhcPeiBulkTransfer: HC is halted or has system error\n"));
goto ON_EXIT;
}
//
// Check if the device is still enabled before every transaction.
//
SlotId = XhcPeiBusDevAddrToSlotId (Xhc, DeviceAddress);
if (SlotId == 0) {
goto ON_EXIT;
}
//
// Create a new URB, insert it into the asynchronous
// schedule list, then poll the execution status.
//
Urb = XhcPeiCreateUrb (
Xhc,
DeviceAddress,
EndPointAddress,
DeviceSpeed,
MaximumPacketLength,
XHC_BULK_TRANSFER,
NULL,
Data[0],
*DataLength,
NULL,
NULL
);
if (Urb == NULL) {
DEBUG ((EFI_D_ERROR, "XhcPeiBulkTransfer: failed to create URB\n"));
Status = EFI_OUT_OF_RESOURCES;
goto ON_EXIT;
}
Status = XhcPeiExecTransfer (Xhc, FALSE, Urb, TimeOut);
*TransferResult = Urb->Result;
*DataLength = Urb->Completed;
if (Status == EFI_TIMEOUT) {
//
// The transfer timed out. Abort the transfer by dequeueing of the TD.
//
RecoveryStatus = XhcPeiDequeueTrbFromEndpoint(Xhc, Urb);
if (EFI_ERROR(RecoveryStatus)) {
DEBUG((EFI_D_ERROR, "XhcPeiBulkTransfer: XhcPeiDequeueTrbFromEndpoint failed\n"));
}
} else {
if (*TransferResult == EFI_USB_NOERROR) {
Status = EFI_SUCCESS;
} else if ((*TransferResult == EFI_USB_ERR_STALL) || (*TransferResult == EFI_USB_ERR_BABBLE)) {
RecoveryStatus = XhcPeiRecoverHaltedEndpoint(Xhc, Urb);
if (EFI_ERROR (RecoveryStatus)) {
DEBUG ((EFI_D_ERROR, "XhcPeiBulkTransfer: XhcPeiRecoverHaltedEndpoint failed\n"));
}
Status = EFI_DEVICE_ERROR;
}
}
XhcPeiFreeUrb (Xhc, Urb);
ON_EXIT:
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "XhcPeiBulkTransfer: error - %r, transfer - %x\n", Status, *TransferResult));
}
return Status;
}
/**
Retrieves the number of root hub ports.
@param[in] PeiServices The pointer to the PEI Services Table.
@param[in] This The pointer to this instance of the
PEI_USB2_HOST_CONTROLLER_PPI.
@param[out] PortNumber The pointer to the number of the root hub ports.
@retval EFI_SUCCESS The port number was retrieved successfully.
@retval EFI_INVALID_PARAMETER PortNumber is NULL.
**/
EFI_STATUS
EFIAPI
XhcPeiGetRootHubPortNumber (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
OUT UINT8 *PortNumber
)
{
PEI_XHC_DEV *XhcDev;
XhcDev = PEI_RECOVERY_USB_XHC_DEV_FROM_THIS (This);
if (PortNumber == NULL) {
return EFI_INVALID_PARAMETER;
}
*PortNumber = XhcDev->HcSParams1.Data.MaxPorts;
DEBUG ((EFI_D_INFO, "XhcPeiGetRootHubPortNumber: PortNumber = %x\n", *PortNumber));
return EFI_SUCCESS;
}
/**
Clears a feature for the specified root hub port.
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
@param PortNumber Specifies the root hub port whose feature
is requested to be cleared.
@param PortFeature Indicates the feature selector associated with the
feature clear request.
@retval EFI_SUCCESS The feature specified by PortFeature was cleared
for the USB root hub port specified by PortNumber.
@retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
**/
EFI_STATUS
EFIAPI
XhcPeiClearRootHubPortFeature (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
IN UINT8 PortNumber,
IN EFI_USB_PORT_FEATURE PortFeature
)
{
PEI_XHC_DEV *Xhc;
UINT32 Offset;
UINT32 State;
EFI_STATUS Status;
Xhc = PEI_RECOVERY_USB_XHC_DEV_FROM_THIS (This);
Status = EFI_SUCCESS;
if (PortNumber >= Xhc->HcSParams1.Data.MaxPorts) {
Status = EFI_INVALID_PARAMETER;
goto ON_EXIT;
}
Offset = (UINT32) (XHC_PORTSC_OFFSET + (0x10 * PortNumber));
State = XhcPeiReadOpReg (Xhc, Offset);
DEBUG ((EFI_D_INFO, "XhcPeiClearRootHubPortFeature: Port: %x State: %x\n", PortNumber, State));
//
// Mask off the port status change bits, these bits are
// write clean bits
//
State &= ~ (BIT1 | BIT17 | BIT18 | BIT19 | BIT20 | BIT21 | BIT22 | BIT23);
switch (PortFeature) {
case EfiUsbPortEnable:
//
// Ports may only be enabled by the xHC. Software cannot enable a port by writing a '1' to this flag.
// A port may be disabled by software writing a '1' to this flag.
//
State |= XHC_PORTSC_PED;
State &= ~XHC_PORTSC_RESET;
XhcPeiWriteOpReg (Xhc, Offset, State);
break;
case EfiUsbPortSuspend:
State |= XHC_PORTSC_LWS;
XhcPeiWriteOpReg (Xhc, Offset, State);
State &= ~XHC_PORTSC_PLS;
XhcPeiWriteOpReg (Xhc, Offset, State);
break;
case EfiUsbPortReset:
//
// PORTSC_RESET BIT(4) bit is RW1S attribute, which means Write-1-to-set status:
// Register bits indicate status when read, a clear bit may be set by
// writing a '1'. Writing a '0' to RW1S bits has no effect.
//
break;
case EfiUsbPortPower:
if (Xhc->HcCParams.Data.Ppc) {
//
// Port Power Control supported
//
State &= ~XHC_PORTSC_PP;
XhcPeiWriteOpReg (Xhc, Offset, State);
}
break;
case EfiUsbPortOwner:
//
// XHCI root hub port don't has the owner bit, ignore the operation
//
break;
case EfiUsbPortConnectChange:
//
// Clear connect status change
//
State |= XHC_PORTSC_CSC;
XhcPeiWriteOpReg (Xhc, Offset, State);
break;
case EfiUsbPortEnableChange:
//
// Clear enable status change
//
State |= XHC_PORTSC_PEC;
XhcPeiWriteOpReg (Xhc, Offset, State);
break;
case EfiUsbPortOverCurrentChange:
//
// Clear PortOverCurrent change
//
State |= XHC_PORTSC_OCC;
XhcPeiWriteOpReg (Xhc, Offset, State);
break;
case EfiUsbPortResetChange:
//
// Clear Port Reset change
//
State |= XHC_PORTSC_PRC;
XhcPeiWriteOpReg (Xhc, Offset, State);
break;
case EfiUsbPortSuspendChange:
//
// Not supported or not related operation
//
break;
default:
Status = EFI_INVALID_PARAMETER;
break;
}
ON_EXIT:
DEBUG ((EFI_D_INFO, "XhcPeiClearRootHubPortFeature: PortFeature: %x Status = %r\n", PortFeature, Status));
return Status;
}
/**
Sets a feature for the specified root hub port.
@param PeiServices The pointer of EFI_PEI_SERVICES
@param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI
@param PortNumber Root hub port to set.
@param PortFeature Feature to set.
@retval EFI_SUCCESS The feature specified by PortFeature was set.
@retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
@retval EFI_TIMEOUT The time out occurred.
**/
EFI_STATUS
EFIAPI
XhcPeiSetRootHubPortFeature (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
IN UINT8 PortNumber,
IN EFI_USB_PORT_FEATURE PortFeature
)
{
PEI_XHC_DEV *Xhc;
UINT32 Offset;
UINT32 State;
EFI_STATUS Status;
Xhc = PEI_RECOVERY_USB_XHC_DEV_FROM_THIS (This);
Status = EFI_SUCCESS;
if (PortNumber >= Xhc->HcSParams1.Data.MaxPorts) {
Status = EFI_INVALID_PARAMETER;
goto ON_EXIT;
}
Offset = (UINT32) (XHC_PORTSC_OFFSET + (0x10 * PortNumber));
State = XhcPeiReadOpReg (Xhc, Offset);
DEBUG ((EFI_D_INFO, "XhcPeiSetRootHubPortFeature: Port: %x State: %x\n", PortNumber, State));
//
// Mask off the port status change bits, these bits are
// write clean bits
//
State &= ~ (BIT1 | BIT17 | BIT18 | BIT19 | BIT20 | BIT21 | BIT22 | BIT23);
switch (PortFeature) {
case EfiUsbPortEnable:
//
// Ports may only be enabled by the xHC. Software cannot enable a port by writing a '1' to this flag.
// A port may be disabled by software writing a '1' to this flag.
//
break;
case EfiUsbPortSuspend:
State |= XHC_PORTSC_LWS;
XhcPeiWriteOpReg (Xhc, Offset, State);
State &= ~XHC_PORTSC_PLS;
State |= (3 << 5) ;
XhcPeiWriteOpReg (Xhc, Offset, State);
break;
case EfiUsbPortReset:
//
// Make sure Host Controller not halt before reset it
//
if (XhcPeiIsHalt (Xhc)) {
Status = XhcPeiRunHC (Xhc, XHC_GENERIC_TIMEOUT);
if (EFI_ERROR (Status)) {
break;
}
}
//
// 4.3.1 Resetting a Root Hub Port
// 1) Write the PORTSC register with the Port Reset (PR) bit set to '1'.
// 2) Wait for a successful Port Status Change Event for the port, where the Port Reset Change (PRC)
// bit in the PORTSC field is set to '1'.
//
State |= XHC_PORTSC_RESET;
XhcPeiWriteOpReg (Xhc, Offset, State);
XhcPeiWaitOpRegBit(Xhc, Offset, XHC_PORTSC_PRC, TRUE, XHC_GENERIC_TIMEOUT);
break;
case EfiUsbPortPower:
if (Xhc->HcCParams.Data.Ppc) {
//
// Port Power Control supported
//
State |= XHC_PORTSC_PP;
XhcPeiWriteOpReg (Xhc, Offset, State);
}
break;
case EfiUsbPortOwner:
//
// XHCI root hub port don't has the owner bit, ignore the operation
//
break;
default:
Status = EFI_INVALID_PARAMETER;
}
ON_EXIT:
DEBUG ((EFI_D_INFO, "XhcPeiSetRootHubPortFeature: PortFeature: %x Status = %r\n", PortFeature, Status));
return Status;
}
/**
Retrieves the current status of a USB root hub port.
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB2_HOST_CONTROLLER_PPI.
@param PortNumber The root hub port to retrieve the state from.
@param PortStatus Variable to receive the port state.
@retval EFI_SUCCESS The status of the USB root hub port specified.
by PortNumber was returned in PortStatus.
@retval EFI_INVALID_PARAMETER PortNumber is invalid.
**/
EFI_STATUS
EFIAPI
XhcPeiGetRootHubPortStatus (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB2_HOST_CONTROLLER_PPI *This,
IN UINT8 PortNumber,
OUT EFI_USB_PORT_STATUS *PortStatus
)
{
PEI_XHC_DEV *Xhc;
UINT32 Offset;
UINT32 State;
UINTN Index;
UINTN MapSize;
USB_DEV_ROUTE ParentRouteChart;
if (PortStatus == NULL) {
return EFI_INVALID_PARAMETER;
}
Xhc = PEI_RECOVERY_USB_XHC_DEV_FROM_THIS (This);
if (PortNumber >= Xhc->HcSParams1.Data.MaxPorts) {
return EFI_INVALID_PARAMETER;
}
//
// Clear port status.
//
PortStatus->PortStatus = 0;
PortStatus->PortChangeStatus = 0;
Offset = (UINT32) (XHC_PORTSC_OFFSET + (0x10 * PortNumber));
State = XhcPeiReadOpReg (Xhc, Offset);
DEBUG ((EFI_D_INFO, "XhcPeiGetRootHubPortStatus: Port: %x State: %x\n", PortNumber, State));
//
// According to XHCI 1.0 spec, bit 10~13 of the root port status register identifies the speed of the attached device.
//
switch ((State & XHC_PORTSC_PS) >> 10) {
case 2:
PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
break;
case 3:
PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
break;
case 4:
PortStatus->PortStatus |= USB_PORT_STAT_SUPER_SPEED;
break;
default:
break;
}
//
// Convert the XHCI port/port change state to UEFI status
//
MapSize = sizeof (mUsbPortStateMap) / sizeof (USB_PORT_STATE_MAP);
for (Index = 0; Index < MapSize; Index++) {
if (XHC_BIT_IS_SET (State, mUsbPortStateMap[Index].HwState)) {
PortStatus->PortStatus = (UINT16) (PortStatus->PortStatus | mUsbPortStateMap[Index].UefiState);
}
}
//
// Bit5~8 reflects its current link state.
//
if ((State & XHC_PORTSC_PLS) >> 5 == 3) {
PortStatus->PortStatus |= USB_PORT_STAT_SUSPEND;
}
MapSize = sizeof (mUsbPortChangeMap) / sizeof (USB_PORT_STATE_MAP);
for (Index = 0; Index < MapSize; Index++) {
if (XHC_BIT_IS_SET (State, mUsbPortChangeMap[Index].HwState)) {
PortStatus->PortChangeStatus = (UINT16) (PortStatus->PortChangeStatus | mUsbPortChangeMap[Index].UefiState);
}
}
MapSize = sizeof (mUsbClearPortChangeMap) / sizeof (USB_CLEAR_PORT_MAP);
for (Index = 0; Index < MapSize; Index++) {
if (XHC_BIT_IS_SET (State, mUsbClearPortChangeMap[Index].HwState)) {
XhcPeiClearRootHubPortFeature (PeiServices, This, PortNumber, (EFI_USB_PORT_FEATURE)mUsbClearPortChangeMap[Index].Selector);
}
}
//
// Poll the root port status register to enable/disable corresponding device slot if there is a device attached/detached.
// For those devices behind hub, we get its attach/detach event by hooking Get_Port_Status request at control transfer for those hub.
//
ParentRouteChart.Dword = 0;
XhcPeiPollPortStatusChange (Xhc, ParentRouteChart, PortNumber, PortStatus);
DEBUG ((EFI_D_INFO, "XhcPeiGetRootHubPortStatus: PortChangeStatus: %x PortStatus: %x\n", PortStatus->PortChangeStatus, PortStatus->PortStatus));
return EFI_SUCCESS;
}
/**
One notified function to stop the Host Controller at the end of PEI
@param[in] PeiServices Pointer to PEI Services Table.
@param[in] NotifyDescriptor Pointer to the descriptor for the Notification event that
caused this function to execute.
@param[in] Ppi Pointer to the PPI data associated with this function.
@retval EFI_SUCCESS The function completes successfully
@retval others
**/
EFI_STATUS
EFIAPI
XhcEndOfPei (
IN EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
IN VOID *Ppi
)
{
PEI_XHC_DEV *Xhc;
Xhc = PEI_RECOVERY_USB_XHC_DEV_FROM_THIS_NOTIFY(NotifyDescriptor);
XhcPeiHaltHC (Xhc, XHC_GENERIC_TIMEOUT);
XhcPeiFreeSched (Xhc);
return EFI_SUCCESS;
}
/**
@param FileHandle Handle of the file being invoked.
@param PeiServices Describes the list of possible PEI Services.
@retval EFI_SUCCESS PPI successfully installed.
**/
EFI_STATUS
EFIAPI
XhcPeimEntry (
IN EFI_PEI_FILE_HANDLE FileHandle,
IN CONST EFI_PEI_SERVICES **PeiServices
)
{
PEI_USB_CONTROLLER_PPI *UsbControllerPpi;
EFI_STATUS Status;
UINT8 Index;
UINTN ControllerType;
UINTN BaseAddress;
UINTN MemPages;
PEI_XHC_DEV *XhcDev;
EFI_PHYSICAL_ADDRESS TempPtr;
UINT32 PageSize;
//
// Shadow this PEIM to run from memory.
//
if (!EFI_ERROR (PeiServicesRegisterForShadow (FileHandle))) {
return EFI_SUCCESS;
}
Status = PeiServicesLocatePpi (
&gPeiUsbControllerPpiGuid,
0,
NULL,
(VOID **) &UsbControllerPpi
);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
IoMmuInit ();
Index = 0;
while (TRUE) {
Status = UsbControllerPpi->GetUsbController (
(EFI_PEI_SERVICES **) PeiServices,
UsbControllerPpi,
Index,
&ControllerType,
&BaseAddress
);
//
// When status is error, it means no controller is found.
//
if (EFI_ERROR (Status)) {
break;
}
//
// This PEIM is for XHC type controller.
//
if (ControllerType != PEI_XHCI_CONTROLLER) {
Index++;
continue;
}
MemPages = EFI_SIZE_TO_PAGES (sizeof (PEI_XHC_DEV));
Status = PeiServicesAllocatePages (
EfiBootServicesData,
MemPages,
&TempPtr
);
if (EFI_ERROR (Status)) {
return EFI_OUT_OF_RESOURCES;
}
ZeroMem ((VOID *) (UINTN) TempPtr, EFI_PAGES_TO_SIZE (MemPages));
XhcDev = (PEI_XHC_DEV *) ((UINTN) TempPtr);
XhcDev->Signature = USB_XHC_DEV_SIGNATURE;
XhcDev->UsbHostControllerBaseAddress = (UINT32) BaseAddress;
XhcDev->CapLength = (UINT8) (XhcPeiReadCapRegister (XhcDev, XHC_CAPLENGTH_OFFSET) & 0x0FF);
XhcDev->HcSParams1.Dword = XhcPeiReadCapRegister (XhcDev, XHC_HCSPARAMS1_OFFSET);
XhcDev->HcSParams2.Dword = XhcPeiReadCapRegister (XhcDev, XHC_HCSPARAMS2_OFFSET);
XhcDev->HcCParams.Dword = XhcPeiReadCapRegister (XhcDev, XHC_HCCPARAMS_OFFSET);
XhcDev->DBOff = XhcPeiReadCapRegister (XhcDev, XHC_DBOFF_OFFSET);
XhcDev->RTSOff = XhcPeiReadCapRegister (XhcDev, XHC_RTSOFF_OFFSET);
//
// This PageSize field defines the page size supported by the xHC implementation.
// This xHC supports a page size of 2^(n+12) if bit n is Set. For example,
// if bit 0 is Set, the xHC supports 4k byte page sizes.
//
PageSize = XhcPeiReadOpReg (XhcDev, XHC_PAGESIZE_OFFSET) & XHC_PAGESIZE_MASK;
XhcDev->PageSize = 1 << (HighBitSet32 (PageSize) + 12);
DEBUG ((EFI_D_INFO, "XhciPei: UsbHostControllerBaseAddress: %x\n", XhcDev->UsbHostControllerBaseAddress));
DEBUG ((EFI_D_INFO, "XhciPei: CapLength: %x\n", XhcDev->CapLength));
DEBUG ((EFI_D_INFO, "XhciPei: HcSParams1: %x\n", XhcDev->HcSParams1.Dword));
DEBUG ((EFI_D_INFO, "XhciPei: HcSParams2: %x\n", XhcDev->HcSParams2.Dword));
DEBUG ((EFI_D_INFO, "XhciPei: HcCParams: %x\n", XhcDev->HcCParams.Dword));
DEBUG ((EFI_D_INFO, "XhciPei: DBOff: %x\n", XhcDev->DBOff));
DEBUG ((EFI_D_INFO, "XhciPei: RTSOff: %x\n", XhcDev->RTSOff));
DEBUG ((EFI_D_INFO, "XhciPei: PageSize: %x\n", XhcDev->PageSize));
XhcPeiResetHC (XhcDev, XHC_RESET_TIMEOUT);
ASSERT (XhcPeiIsHalt (XhcDev));
//
// Initialize the schedule
//
XhcPeiInitSched (XhcDev);
//
// Start the Host Controller
//
XhcPeiRunHC (XhcDev, XHC_GENERIC_TIMEOUT);
//
// Wait for root port state stable
//
MicroSecondDelay (XHC_ROOT_PORT_STATE_STABLE);
XhcDev->Usb2HostControllerPpi.ControlTransfer = XhcPeiControlTransfer;
XhcDev->Usb2HostControllerPpi.BulkTransfer = XhcPeiBulkTransfer;
XhcDev->Usb2HostControllerPpi.GetRootHubPortNumber = XhcPeiGetRootHubPortNumber;
XhcDev->Usb2HostControllerPpi.GetRootHubPortStatus = XhcPeiGetRootHubPortStatus;
XhcDev->Usb2HostControllerPpi.SetRootHubPortFeature = XhcPeiSetRootHubPortFeature;
XhcDev->Usb2HostControllerPpi.ClearRootHubPortFeature = XhcPeiClearRootHubPortFeature;
XhcDev->PpiDescriptor.Flags = (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST);
XhcDev->PpiDescriptor.Guid = &gPeiUsb2HostControllerPpiGuid;
XhcDev->PpiDescriptor.Ppi = &XhcDev->Usb2HostControllerPpi;
XhcDev->EndOfPeiNotifyList.Flags = (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST);
XhcDev->EndOfPeiNotifyList.Guid = &gEfiEndOfPeiSignalPpiGuid;
XhcDev->EndOfPeiNotifyList.Notify = XhcEndOfPei;
PeiServicesInstallPpi (&XhcDev->PpiDescriptor);
PeiServicesNotifyPpi (&XhcDev->EndOfPeiNotifyList);
Index++;
}
return EFI_SUCCESS;
}
Reference in New Issue View Git Blame Copy Permalink