audk/UefiCpuPkg/PiSmmCpuDxeSmm/SmmMp.c

344 lines
19 KiB
C

/** @file
SMM MP protocol implementation
Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#include "PiSmmCpuDxeSmm.h"
#include "SmmMp.h"
///
/// SMM MP Protocol instance
///
EFI_MM_MP_PROTOCOL mSmmMp = {
EFI_MM_MP_PROTOCOL_REVISION,
0,
SmmMpGetNumberOfProcessors,
SmmMpDispatchProcedure,
SmmMpBroadcastProcedure,
SmmMpSetStartupProcedure,
SmmMpCheckForProcedure,
SmmMpWaitForProcedure
};
/**
Service to retrieves the number of logical processor in the platform.
@param[in] This The EFI_MM_MP_PROTOCOL instance.
@param[out] NumberOfProcessors Pointer to the total number of logical processors in the system,
including the BSP and all APs.
@retval EFI_SUCCESS The number of processors was retrieved successfully
@retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL
**/
EFI_STATUS
EFIAPI
SmmMpGetNumberOfProcessors (
IN CONST EFI_MM_MP_PROTOCOL *This,
OUT UINTN *NumberOfProcessors
)
{
if (NumberOfProcessors == NULL) {
return EFI_INVALID_PARAMETER;
}
*NumberOfProcessors = gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus;
return EFI_SUCCESS;
}
/**
This service allows the caller to invoke a procedure one of the application processors (AP). This
function uses an optional token parameter to support blocking and non-blocking modes. If the token
is passed into the call, the function will operate in a non-blocking fashion and the caller can
check for completion with CheckOnProcedure or WaitForProcedure.
@param[in] This The EFI_MM_MP_PROTOCOL instance.
@param[in] Procedure A pointer to the procedure to be run on the designated target
AP of the system. Type EFI_AP_PROCEDURE2 is defined below in
related definitions.
@param[in] CpuNumber The zero-based index of the processor number of the target
AP, on which the code stream is supposed to run. If the number
points to the calling processor then it will not run the
supplied code.
@param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for this AP to
finish execution of Procedure, either for blocking or
non-blocking mode. Zero means infinity. If the timeout
expires before this AP returns from Procedure, then Procedure
on the AP is terminated. If the timeout expires in blocking
mode, the call returns EFI_TIMEOUT. If the timeout expires
in non-blocking mode, the timeout determined can be through
CheckOnProcedure or WaitForProcedure.
Note that timeout support is optional. Whether an
implementation supports this feature, can be determined via
the Attributes data member.
@param[in,out] ProcedureArguments Allows the caller to pass a list of parameters to the code
that is run by the AP. It is an optional common mailbox
between APs and the caller to share information.
@param[in,out] Token This is parameter is broken into two components:
1.Token->Completion is an optional parameter that allows the
caller to execute the procedure in a blocking or non-blocking
fashion. If it is NULL the call is blocking, and the call will
not return until the AP has completed the procedure. If the
token is not NULL, the call will return immediately. The caller
can check whether the procedure has completed with
CheckOnProcedure or WaitForProcedure.
2.Token->Status The implementation updates the address pointed
at by this variable with the status code returned by Procedure
when it completes execution on the target AP, or with EFI_TIMEOUT
if the Procedure fails to complete within the optional timeout.
The implementation will update this variable with EFI_NOT_READY
prior to starting Procedure on the target AP
@param[in,out] CPUStatus This optional pointer may be used to get the status code returned
by Procedure when it completes execution on the target AP, or with
EFI_TIMEOUT if the Procedure fails to complete within the optional
timeout. The implementation will update this variable with
EFI_NOT_READY prior to starting Procedure on the target AP.
@retval EFI_SUCCESS In the blocking case, this indicates that Procedure has completed
execution on the target AP.
In the non-blocking case this indicates that the procedure has
been successfully scheduled for execution on the target AP.
@retval EFI_INVALID_PARAMETER The input arguments are out of range. Either the target AP is the
caller of the function, or the Procedure or Token is NULL
@retval EFI_NOT_READY If the target AP is busy executing another procedure
@retval EFI_ALREADY_STARTED Token is already in use for another procedure
@retval EFI_TIMEOUT In blocking mode, the timeout expired before the specified AP
has finished
@retval EFI_OUT_OF_RESOURCES Could not allocate a required resource.
**/
EFI_STATUS
EFIAPI
SmmMpDispatchProcedure (
IN CONST EFI_MM_MP_PROTOCOL *This,
IN EFI_AP_PROCEDURE2 Procedure,
IN UINTN CpuNumber,
IN UINTN TimeoutInMicroseconds,
IN OUT VOID *ProcedureArguments OPTIONAL,
IN OUT MM_COMPLETION *Token,
IN OUT EFI_STATUS *CPUStatus
)
{
return InternalSmmStartupThisAp (
Procedure,
CpuNumber,
ProcedureArguments,
Token,
TimeoutInMicroseconds,
CPUStatus
);
}
/**
This service allows the caller to invoke a procedure on all running application processors (AP)
except the caller. This function uses an optional token parameter to support blocking and
nonblocking modes. If the token is passed into the call, the function will operate in a non-blocking
fashion and the caller can check for completion with CheckOnProcedure or WaitForProcedure.
It is not necessary for the implementation to run the procedure on every processor on the platform.
Processors that are powered down in such a way that they cannot respond to interrupts, may be
excluded from the broadcast.
@param[in] This The EFI_MM_MP_PROTOCOL instance.
@param[in] Procedure A pointer to the code stream to be run on the APs that have
entered MM. Type EFI_AP_PROCEDURE is defined below in related
definitions.
@param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for the APs to finish
execution of Procedure, either for blocking or non-blocking mode.
Zero means infinity. If the timeout expires before all APs return
from Procedure, then Procedure on the failed APs is terminated. If
the timeout expires in blocking mode, the call returns EFI_TIMEOUT.
If the timeout expires in non-blocking mode, the timeout determined
can be through CheckOnProcedure or WaitForProcedure.
Note that timeout support is optional. Whether an implementation
supports this feature can be determined via the Attributes data
member.
@param[in,out] ProcedureArguments Allows the caller to pass a list of parameters to the code
that is run by the AP. It is an optional common mailbox
between APs and the caller to share information.
@param[in,out] Token This is parameter is broken into two components:
1.Token->Completion is an optional parameter that allows the
caller to execute the procedure in a blocking or non-blocking
fashion. If it is NULL the call is blocking, and the call will
not return until the AP has completed the procedure. If the
token is not NULL, the call will return immediately. The caller
can check whether the procedure has completed with
CheckOnProcedure or WaitForProcedure.
2.Token->Status The implementation updates the address pointed
at by this variable with the status code returned by Procedure
when it completes execution on the target AP, or with EFI_TIMEOUT
if the Procedure fails to complete within the optional timeout.
The implementation will update this variable with EFI_NOT_READY
prior to starting Procedure on the target AP
@param[in,out] CPUStatus This optional pointer may be used to get the individual status
returned by every AP that participated in the broadcast. This
parameter if used provides the base address of an array to hold
the EFI_STATUS value of each AP in the system. The size of the
array can be ascertained by the GetNumberOfProcessors function.
As mentioned above, the broadcast may not include every processor
in the system. Some implementations may exclude processors that
have been powered down in such a way that they are not responsive
to interrupts. Additionally the broadcast excludes the processor
which is making the BroadcastProcedure call. For every excluded
processor, the array entry must contain a value of EFI_NOT_STARTED
@retval EFI_SUCCESS In the blocking case, this indicates that Procedure has completed
execution on the APs.
In the non-blocking case this indicates that the procedure has
been successfully scheduled for execution on the APs.
@retval EFI_INVALID_PARAMETER The Procedure or Token is NULL
@retval EFI_NOT_READY If the target AP is busy executing another procedure
@retval EFI_ALREADY_STARTED Token is already in use for another procedure
@retval EFI_TIMEOUT In blocking mode, the timeout expired before the specified AP
has finished.
@retval EFI_OUT_OF_RESOURCES Could not allocate a required resource.
**/
EFI_STATUS
EFIAPI
SmmMpBroadcastProcedure (
IN CONST EFI_MM_MP_PROTOCOL *This,
IN EFI_AP_PROCEDURE2 Procedure,
IN UINTN TimeoutInMicroseconds,
IN OUT VOID *ProcedureArguments OPTIONAL,
IN OUT MM_COMPLETION *Token,
IN OUT EFI_STATUS *CPUStatus
)
{
return InternalSmmStartupAllAPs (
Procedure,
TimeoutInMicroseconds,
ProcedureArguments,
Token,
CPUStatus
);
}
/**
This service allows the caller to set a startup procedure that will be executed when an AP powers
up from a state where core configuration and context is lost. The procedure is execution has the
following properties:
1. The procedure executes before the processor is handed over to the operating system.
2. All processors execute the same startup procedure.
3. The procedure may run in parallel with other procedures invoked through the functions in this
protocol, or with processors that are executing an MM handler or running in the operating system.
@param[in] This The EFI_MM_MP_PROTOCOL instance.
@param[in] Procedure A pointer to the code stream to be run on the designated target AP
of the system. Type EFI_AP_PROCEDURE is defined below in Volume 2
with the related definitions of
EFI_MP_SERVICES_PROTOCOL.StartupAllAPs.
If caller may pass a value of NULL to deregister any existing
startup procedure.
@param[in,out] ProcedureArguments Allows the caller to pass a list of parameters to the code that is
run by the AP. It is an optional common mailbox between APs and
the caller to share information
@retval EFI_SUCCESS The Procedure has been set successfully.
@retval EFI_INVALID_PARAMETER The Procedure is NULL but ProcedureArguments not NULL.
**/
EFI_STATUS
EFIAPI
SmmMpSetStartupProcedure (
IN CONST EFI_MM_MP_PROTOCOL *This,
IN EFI_AP_PROCEDURE Procedure,
IN OUT VOID *ProcedureArguments OPTIONAL
)
{
return RegisterStartupProcedure (Procedure, ProcedureArguments);
}
/**
When non-blocking execution of a procedure on an AP is invoked with DispatchProcedure,
via the use of a token, this function can be used to check for completion of the procedure on the AP.
The function takes the token that was passed into the DispatchProcedure call. If the procedure
is complete, and therefore it is now possible to run another procedure on the same AP, this function
returns EFI_SUCESS. In this case the status returned by the procedure that executed on the AP is
returned in the token's Status field. If the procedure has not yet completed, then this function
returns EFI_NOT_READY.
When a non-blocking execution of a procedure is invoked with BroadcastProcedure, via the
use of a token, this function can be used to check for completion of the procedure on all the
broadcast APs. The function takes the token that was passed into the BroadcastProcedure
call. If the procedure is complete on all broadcast APs this function returns EFI_SUCESS. In this
case the Status field in the token passed into the function reflects the overall result of the
invocation, which may be EFI_SUCCESS, if all executions succeeded, or the first observed failure.
If the procedure has not yet completed on the broadcast APs, the function returns
EFI_NOT_READY.
@param[in] This The EFI_MM_MP_PROTOCOL instance.
@param[in] Token This parameter describes the token that was passed into
DispatchProcedure or BroadcastProcedure.
@retval EFI_SUCCESS Procedure has completed.
@retval EFI_NOT_READY The Procedure has not completed.
@retval EFI_INVALID_PARAMETER Token or Token->Completion is NULL
@retval EFI_NOT_FOUND Token is not currently in use for a non-blocking call
**/
EFI_STATUS
EFIAPI
SmmMpCheckForProcedure (
IN CONST EFI_MM_MP_PROTOCOL *This,
IN MM_COMPLETION Token
)
{
if (Token == NULL) {
return EFI_INVALID_PARAMETER;
}
if (!IsTokenInUse ((SPIN_LOCK *)Token)) {
return EFI_NOT_FOUND;
}
return IsApReady ((SPIN_LOCK *)Token);
}
/**
When a non-blocking execution of a procedure on an AP is invoked via DispatchProcedure,
this function will block the caller until the remote procedure has completed on the designated AP.
The non-blocking procedure invocation is identified by the Token parameter, which must match the
token that used when DispatchProcedure was called. Upon completion the status returned by
the procedure that executed on the AP is used to update the token's Status field.
When a non-blocking execution of a procedure on an AP is invoked via BroadcastProcedure
this function will block the caller until the remote procedure has completed on all of the APs that
entered MM. The non-blocking procedure invocation is identified by the Token parameter, which
must match the token that used when BroadcastProcedure was called. Upon completion the
overall status returned by the procedures that executed on the broadcast AP is used to update the
token's Status field. The overall status may be EFI_SUCCESS, if all executions succeeded, or the
first observed failure.
@param[in] This The EFI_MM_MP_PROTOCOL instance.
@param[in] Token This parameter describes the token that was passed into
DispatchProcedure or BroadcastProcedure.
@retval EFI_SUCCESS Procedure has completed.
@retval EFI_INVALID_PARAMETER Token or Token->Completion is NULL
@retval EFI_NOT_FOUND Token is not currently in use for a non-blocking call
**/
EFI_STATUS
EFIAPI
SmmMpWaitForProcedure (
IN CONST EFI_MM_MP_PROTOCOL *This,
IN MM_COMPLETION Token
)
{
EFI_STATUS Status;
do {
Status = SmmMpCheckForProcedure (This, Token);
} while (Status == EFI_NOT_READY);
return Status;
}