audk/MdeModulePkg/Universal/Network/SnpDxe/Station_address.c

251 lines
7.2 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/** @file
Implementation of reading the MAC address of a network adapter.
Copyright (c) 2004 - 2007, Intel Corporation. <BR>
All rights reserved. This program and the accompanying materials are licensed
and made available under the terms and conditions of the BSD License which
accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "Snp.h"
/**
this routine calls undi to read the MAC address of the NIC and updates the
mode structure with the address.
@param Snp pointer to snp driver structure.
@retval EFI_SUCCESS the MAC address of the NIC is read successfully.
@retval EFI_DEVICE_ERROR failed to read the MAC address of the NIC.
**/
EFI_STATUS
PxeGetStnAddr (
SNP_DRIVER *Snp
)
{
PXE_DB_STATION_ADDRESS *Db;
Db = Snp->Db;
Snp->Cdb.OpCode = PXE_OPCODE_STATION_ADDRESS;
Snp->Cdb.OpFlags = PXE_OPFLAGS_STATION_ADDRESS_READ;
Snp->Cdb.CPBaddr = PXE_CPBADDR_NOT_USED;
Snp->Cdb.CPBsize = PXE_CPBSIZE_NOT_USED;
Snp->Cdb.DBsize = sizeof (PXE_DB_STATION_ADDRESS);
Snp->Cdb.DBaddr = (UINT64)(UINTN) Db;
Snp->Cdb.StatCode = PXE_STATCODE_INITIALIZE;
Snp->Cdb.StatFlags = PXE_STATFLAGS_INITIALIZE;
Snp->Cdb.IFnum = Snp->IfNum;
Snp->Cdb.Control = PXE_CONTROL_LAST_CDB_IN_LIST;
//
// Issue UNDI command and check result.
//
DEBUG ((EFI_D_NET, "\nsnp->undi.station_addr() "));
(*Snp->IssueUndi32Command) ((UINT64)(UINTN) &Snp->Cdb);
if (Snp->Cdb.StatCode != PXE_STATCODE_SUCCESS) {
DEBUG (
(EFI_D_ERROR,
"\nsnp->undi.station_addr() %xh:%xh\n",
Snp->Cdb.StatFlags,
Snp->Cdb.StatCode)
);
return EFI_DEVICE_ERROR;
}
//
// Set new station address in SNP->Mode structure and return success.
//
CopyMem (
&(Snp->Mode.CurrentAddress),
&Db->StationAddr,
Snp->Mode.HwAddressSize
);
CopyMem (
&Snp->Mode.BroadcastAddress,
&Db->BroadcastAddr,
Snp->Mode.HwAddressSize
);
CopyMem (
&Snp->Mode.PermanentAddress,
&Db->PermanentAddr,
Snp->Mode.HwAddressSize
);
return EFI_SUCCESS;
}
/**
this routine calls undi to set a new MAC address for the NIC,
@param Snp pointer to Snp driver structure
@param NewMacAddr pointer to a mac address to be set for the nic, if this is
NULL then this routine resets the mac address to the NIC's
original address.
**/
EFI_STATUS
PxeSetStnAddr (
SNP_DRIVER *Snp,
EFI_MAC_ADDRESS *NewMacAddr
)
{
PXE_CPB_STATION_ADDRESS *Cpb;
PXE_DB_STATION_ADDRESS *Db;
Cpb = Snp->Cpb;
Db = Snp->Db;
Snp->Cdb.OpCode = PXE_OPCODE_STATION_ADDRESS;
if (NewMacAddr == NULL) {
Snp->Cdb.OpFlags = PXE_OPFLAGS_STATION_ADDRESS_RESET;
Snp->Cdb.CPBsize = PXE_CPBSIZE_NOT_USED;
Snp->Cdb.CPBaddr = PXE_CPBADDR_NOT_USED;
} else {
Snp->Cdb.OpFlags = PXE_OPFLAGS_STATION_ADDRESS_READ;
//
// even though the OPFLAGS are set to READ, supplying a new address
// in the CPB will make undi change the mac address to the new one.
//
CopyMem (&Cpb->StationAddr, NewMacAddr, Snp->Mode.HwAddressSize);
Snp->Cdb.CPBsize = sizeof (PXE_CPB_STATION_ADDRESS);
Snp->Cdb.CPBaddr = (UINT64)(UINTN) Cpb;
}
Snp->Cdb.DBsize = sizeof (PXE_DB_STATION_ADDRESS);
Snp->Cdb.DBaddr = (UINT64)(UINTN) Db;
Snp->Cdb.StatCode = PXE_STATCODE_INITIALIZE;
Snp->Cdb.StatFlags = PXE_STATFLAGS_INITIALIZE;
Snp->Cdb.IFnum = Snp->IfNum;
Snp->Cdb.Control = PXE_CONTROL_LAST_CDB_IN_LIST;
//
// Issue UNDI command and check result.
//
DEBUG ((EFI_D_NET, "\nsnp->undi.station_addr() "));
(*Snp->IssueUndi32Command) ((UINT64)(UINTN) &Snp->Cdb);
if (Snp->Cdb.StatCode != PXE_STATCODE_SUCCESS) {
DEBUG (
(EFI_D_ERROR,
"\nsnp->undi.station_addr() %xh:%xh\n",
Snp->Cdb.StatFlags,
Snp->Cdb.StatCode)
);
//
// UNDI command failed. Return UNDI status to caller.
//
return EFI_DEVICE_ERROR;
}
//
// read the changed address and save it in SNP->Mode structure
//
PxeGetStnAddr (Snp);
return EFI_SUCCESS;
}
/**
Modifies or resets the current station address, if supported.
This function modifies or resets the current station address of a network
interface, if supported. If Reset is TRUE, then the current station address is
set to the network interfaces permanent address. If Reset is FALSE, and the
network interface allows its station address to be modified, then the current
station address is changed to the address specified by New. If the network
interface does not allow its station address to be modified, then
EFI_INVALID_PARAMETER will be returned. If the station address is successfully
updated on the network interface, EFI_SUCCESS will be returned. If the driver
has not been initialized, EFI_DEVICE_ERROR will be returned.
@param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
@param Reset Flag used to reset the station address to the network interfaces
permanent address.
@param New New station address to be used for the network interface.
@retval EFI_SUCCESS The network interfaces station address was updated.
@retval EFI_NOT_STARTED The Simple Network Protocol interface has not been
started by calling Start().
@retval EFI_INVALID_PARAMETER The New station address was not accepted by the NIC.
@retval EFI_INVALID_PARAMETER Reset is FALSE and New is NULL.
@retval EFI_DEVICE_ERROR The Simple Network Protocol interface has not
been initialized by calling Initialize().
@retval EFI_DEVICE_ERROR An error occurred attempting to set the new
station address.
@retval EFI_UNSUPPORTED The NIC does not support changing the network
interfaces station address.
**/
EFI_STATUS
EFIAPI
SnpUndi32StationAddress (
IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
IN BOOLEAN Reset,
IN EFI_MAC_ADDRESS *New OPTIONAL
)
{
SNP_DRIVER *Snp;
EFI_STATUS Status;
EFI_TPL OldTpl;
//
// Check for invalid parameter combinations.
//
if ((This == NULL) ||
(!Reset && (New == NULL))) {
return EFI_INVALID_PARAMETER;
}
Snp = EFI_SIMPLE_NETWORK_DEV_FROM_THIS (This);
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
//
// Return error if the SNP is not initialized.
//
switch (Snp->Mode.State) {
case EfiSimpleNetworkInitialized:
break;
case EfiSimpleNetworkStopped:
Status = EFI_NOT_STARTED;
goto ON_EXIT;
default:
Status = EFI_DEVICE_ERROR;
goto ON_EXIT;
}
if (Reset) {
Status = PxeSetStnAddr (Snp, NULL);
} else {
Status = PxeSetStnAddr (Snp, New);
}
ON_EXIT:
gBS->RestoreTPL (OldTpl);
return Status;
}