mirror of https://github.com/acidanthera/audk.git
298 lines
20 KiB
C
298 lines
20 KiB
C
/** @file
|
|
Header file for eMMC support.
|
|
|
|
This header file contains some definitions defined in EMMC4.5/EMMC5.0 spec.
|
|
|
|
Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
|
|
This program and the accompanying materials
|
|
are licensed and made available under the terms and conditions of the BSD License
|
|
which accompanies this distribution. The full text of the license may be found at
|
|
http://opensource.org/licenses/bsd-license.php
|
|
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
|
|
**/
|
|
|
|
#ifndef __EMMC_H__
|
|
#define __EMMC_H__
|
|
|
|
//
|
|
// EMMC command index
|
|
//
|
|
#define EMMC_GO_IDLE_STATE 0
|
|
#define EMMC_SEND_OP_COND 1
|
|
#define EMMC_ALL_SEND_CID 2
|
|
#define EMMC_SET_RELATIVE_ADDR 3
|
|
#define EMMC_SET_DSR 4
|
|
#define EMMC_SLEEP_AWAKE 5
|
|
#define EMMC_SWITCH 6
|
|
#define EMMC_SELECT_DESELECT_CARD 7
|
|
#define EMMC_SEND_EXT_CSD 8
|
|
#define EMMC_SEND_CSD 9
|
|
#define EMMC_SEND_CID 10
|
|
#define EMMC_STOP_TRANSMISSION 12
|
|
#define EMMC_SEND_STATUS 13
|
|
#define EMMC_BUSTEST_R 14
|
|
#define EMMC_GO_INACTIVE_STATE 15
|
|
#define EMMC_SET_BLOCKLEN 16
|
|
#define EMMC_READ_SINGLE_BLOCK 17
|
|
#define EMMC_READ_MULTIPLE_BLOCK 18
|
|
#define EMMC_BUSTEST_W 19
|
|
#define EMMC_SEND_TUNING_BLOCK 21
|
|
#define EMMC_SET_BLOCK_COUNT 23
|
|
#define EMMC_WRITE_BLOCK 24
|
|
#define EMMC_WRITE_MULTIPLE_BLOCK 25
|
|
#define EMMC_PROGRAM_CID 26
|
|
#define EMMC_PROGRAM_CSD 27
|
|
#define EMMC_SET_WRITE_PROT 28
|
|
#define EMMC_CLR_WRITE_PROT 29
|
|
#define EMMC_SEND_WRITE_PROT 30
|
|
#define EMMC_SEND_WRITE_PROT_TYPE 31
|
|
#define EMMC_ERASE_GROUP_START 35
|
|
#define EMMC_ERASE_GROUP_END 36
|
|
#define EMMC_ERASE 38
|
|
#define EMMC_FAST_IO 39
|
|
#define EMMC_GO_IRQ_STATE 40
|
|
#define EMMC_LOCK_UNLOCK 42
|
|
#define EMMC_SET_TIME 49
|
|
#define EMMC_PROTOCOL_RD 53
|
|
#define EMMC_PROTOCOL_WR 54
|
|
#define EMMC_APP_CMD 55
|
|
#define EMMC_GEN_CMD 56
|
|
|
|
typedef enum {
|
|
EmmcPartitionUserData = 0,
|
|
EmmcPartitionBoot1 = 1,
|
|
EmmcPartitionBoot2 = 2,
|
|
EmmcPartitionRPMB = 3,
|
|
EmmcPartitionGP1 = 4,
|
|
EmmcPartitionGP2 = 5,
|
|
EmmcPartitionGP3 = 6,
|
|
EmmcPartitionGP4 = 7,
|
|
EmmcPartitionUnknown
|
|
} EMMC_PARTITION_TYPE;
|
|
|
|
#pragma pack(1)
|
|
typedef struct {
|
|
UINT8 NotUsed:1; // Not used [0:0]
|
|
UINT8 Crc:7; // CRC [7:1]
|
|
UINT8 ManufacturingDate; // Manufacturing date [15:8]
|
|
UINT8 ProductSerialNumber[4]; // Product serial number [47:16]
|
|
UINT8 ProductRevision; // Product revision [55:48]
|
|
UINT8 ProductName[6]; // Product name [103:56]
|
|
UINT8 OemId; // OEM/Application ID [111:104]
|
|
UINT8 DeviceType:2; // Device/BGA [113:112]
|
|
UINT8 Reserved:6; // Reserved [119:114]
|
|
UINT8 ManufacturerId; // Manufacturer ID [127:120]
|
|
} EMMC_CID;
|
|
|
|
typedef struct {
|
|
UINT32 NotUsed:1; // Not used [0:0]
|
|
UINT32 Crc:7; // CRC [7:1]
|
|
UINT32 Ecc:2; // ECC code [9:8]
|
|
UINT32 FileFormat:2; // File format [11:10]
|
|
UINT32 TmpWriteProtect:1; // Temporary write protection [12:12]
|
|
UINT32 PermWriteProtect:1; // Permanent write protection [13:13]
|
|
UINT32 Copy:1; // Copy flag (OTP) [14:14]
|
|
UINT32 FileFormatGrp:1; // File format group [15:15]
|
|
UINT32 ContentProtApp:1; // Content protection application [16:16]
|
|
UINT32 Reserved:4; // Reserved [20:17]
|
|
UINT32 WriteBlPartial:1; // Partial blocks for write allowed [21:21]
|
|
UINT32 WriteBlLen:4; // Max. write data block length [25:22]
|
|
UINT32 R2WFactor:3; // Write speed factor [28:26]
|
|
UINT32 DefaultEcc:2; // Manufacturer default ECC [30:29]
|
|
UINT32 WpGrpEnable:1; // Write protect group enable [31:31]
|
|
|
|
UINT32 WpGrpSize:5; // Write protect group size [36:32]
|
|
UINT32 EraseGrpMult:5; // Erase group size multiplier [41:37]
|
|
UINT32 EraseGrpSize:5; // Erase group size [46:42]
|
|
UINT32 CSizeMult:3; // Device size multiplier [49:47]
|
|
UINT32 VddWCurrMax:3; // Max. write current @ VDD max [52:50]
|
|
UINT32 VddWCurrMin:3; // Max. write current @ VDD min [55:53]
|
|
UINT32 VddRCurrMax:3; // Max. read current @ VDD max [58:56]
|
|
UINT32 VddRCurrMin:3; // Max. read current @ VDD min [61:59]
|
|
UINT32 CSizeLow:2; // Device size low two bits [63:62]
|
|
|
|
UINT32 CSizeHigh:10; // Device size high eight bits [73:64]
|
|
UINT32 Reserved1:2; // Reserved [75:74]
|
|
UINT32 DsrImp:1; // DSR implemented [76:76]
|
|
UINT32 ReadBlkMisalign:1; // Read block misalignment [77:77]
|
|
UINT32 WriteBlkMisalign:1; // Write block misalignment [78:78]
|
|
UINT32 ReadBlPartial:1; // Partial blocks for read allowed [79:79]
|
|
UINT32 ReadBlLen:4; // Max. read data block length [83:80]
|
|
UINT32 Ccc:12; // Device command classes [95:84]
|
|
|
|
UINT32 TranSpeed:8; // Max. bus clock frequency [103:96]
|
|
UINT32 Nsac:8; // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
|
|
UINT32 Taac:8; // Data read access-time 1 [119:112]
|
|
UINT32 Reserved2:2; // Reserved [121:120]
|
|
UINT32 SpecVers:4; // System specification version [125:122]
|
|
UINT32 CsdStructure:2; // CSD structure [127:126]
|
|
} EMMC_CSD;
|
|
|
|
typedef struct {
|
|
//
|
|
// Modes Segment
|
|
//
|
|
UINT8 Reserved[16]; // Reserved [15:0]
|
|
UINT8 SecureRemovalType; // Secure Removal Type R/W & R [16]
|
|
UINT8 ProductStateAwarenessEnablement; // Product state awareness enablement R/W/E & R [17]
|
|
UINT8 MaxPreLoadingDataSize[4]; // Max pre loading data size R [21:18]
|
|
UINT8 PreLoadingDataSize[4]; // Pre loading data size R/W/EP [25:22]
|
|
UINT8 FfuStatus; // FFU status R [26]
|
|
UINT8 Reserved1[2]; // Reserved [28:27]
|
|
UINT8 ModeOperationCodes; // Mode operation codes W/EP [29]
|
|
UINT8 ModeConfig; // Mode config R/W/EP [30]
|
|
UINT8 Reserved2; // Reserved [31]
|
|
UINT8 FlushCache; // Flushing of the cache W/EP [32]
|
|
UINT8 CacheCtrl; // Control to turn the Cache ON/OFF R/W/EP [33]
|
|
UINT8 PowerOffNotification; // Power Off Notification R/W/EP [34]
|
|
UINT8 PackedFailureIndex; // Packed command failure index R [35]
|
|
UINT8 PackedCommandStatus; // Packed command status R [36]
|
|
UINT8 ContextConf[15]; // Context configuration R/W/EP [51:37]
|
|
UINT8 ExtPartitionsAttribute[2]; // Extended Partitions Attribute R/W [53:52]
|
|
UINT8 ExceptionEventsStatus[2]; // Exception events status R [55:54]
|
|
UINT8 ExceptionEventsCtrl[2]; // Exception events control R/W/EP [57:56]
|
|
UINT8 DyncapNeeded; // Number of addressed group to be Released R [58]
|
|
UINT8 Class6Ctrl; // Class 6 commands control R/W/EP [59]
|
|
UINT8 IniTimeoutEmu; // 1st initialization after disabling sector size emulation R [60]
|
|
UINT8 DataSectorSize; // Sector size R [61]
|
|
UINT8 UseNativeSector; // Sector size emulation R/W [62]
|
|
UINT8 NativeSectorSize; // Native sector size R [63]
|
|
UINT8 VendorSpecificField[64]; // Vendor Specific Fields <vendor specific> [127:64]
|
|
UINT8 Reserved3[2]; // Reserved [129:128]
|
|
UINT8 ProgramCidCsdDdrSupport; // Program CID/CSD in DDR mode support R [130]
|
|
UINT8 PeriodicWakeup; // Periodic Wake-up R/W/E [131]
|
|
UINT8 TcaseSupport; // Package Case Temperature is controlled W/EP [132]
|
|
UINT8 ProductionStateAwareness; // Production state awareness R/W/E [133]
|
|
UINT8 SecBadBlkMgmnt; // Bad Block Management mode R/W [134]
|
|
UINT8 Reserved4; // Reserved [135]
|
|
UINT8 EnhStartAddr[4]; // Enhanced User Data Start Address R/W [139:136]
|
|
UINT8 EnhSizeMult[3]; // Enhanced User Data Area Size R/W [142:140]
|
|
UINT8 GpSizeMult[12]; // General Purpose Partition Size R/W [154:143]
|
|
UINT8 PartitionSettingCompleted; // Partitioning Setting R/W [155]
|
|
UINT8 PartitionsAttribute; // Partitions attribute R/W [156]
|
|
UINT8 MaxEnhSizeMult[3]; // Max Enhanced Area Size R [159:157]
|
|
UINT8 PartitioningSupport; // Partitioning Support R [160]
|
|
UINT8 HpiMgmt; // HPI management R/W/EP [161]
|
|
UINT8 RstFunction; // H/W reset function R/W [162]
|
|
UINT8 BkopsEn; // Enable background operations handshake R/W [163]
|
|
UINT8 BkopsStart; // Manually start background operations W/EP [164]
|
|
UINT8 SanitizeStart; // Start Sanitize operation W/EP [165]
|
|
UINT8 WrRelParam; // Write reliability parameter register R [166]
|
|
UINT8 WrRelSet; // Write reliability setting register R/W [167]
|
|
UINT8 RpmbSizeMult; // RPMB Size R [168]
|
|
UINT8 FwConfig; // FW configuration R/W [169]
|
|
UINT8 Reserved5; // Reserved [170]
|
|
UINT8 UserWp; // User area write protection register R/W,R/W/CP&R/W/EP [171]
|
|
UINT8 Reserved6; // Reserved [172]
|
|
UINT8 BootWp; // Boot area write protection register R/W&R/W/CP[173]
|
|
UINT8 BootWpStatus; // Boot write protection status registers R [174]
|
|
UINT8 EraseGroupDef; // High-density erase group definition R/W/EP [175]
|
|
UINT8 Reserved7; // Reserved [176]
|
|
UINT8 BootBusConditions; // Boot bus Conditions R/W/E [177]
|
|
UINT8 BootConfigProt; // Boot config protection R/W&R/W/CP[178]
|
|
UINT8 PartitionConfig; // Partition configuration R/W/E&R/W/EP[179]
|
|
UINT8 Reserved8; // Reserved [180]
|
|
UINT8 ErasedMemCont; // Erased memory content R [181]
|
|
UINT8 Reserved9; // Reserved [182]
|
|
UINT8 BusWidth; // Bus width mode W/EP [183]
|
|
UINT8 Reserved10; // Reserved [184]
|
|
UINT8 HsTiming; // High-speed interface timing R/W/EP [185]
|
|
UINT8 Reserved11; // Reserved [186]
|
|
UINT8 PowerClass; // Power class R/W/EP [187]
|
|
UINT8 Reserved12; // Reserved [188]
|
|
UINT8 CmdSetRev; // Command set revision R [189]
|
|
UINT8 Reserved13; // Reserved [190]
|
|
UINT8 CmdSet; // Command set R/W/EP [191]
|
|
//
|
|
// Properties Segment
|
|
//
|
|
UINT8 ExtCsdRev; // Extended CSD revision [192]
|
|
UINT8 Reserved14; // Reserved [193]
|
|
UINT8 CsdStructure; // CSD STRUCTURE [194]
|
|
UINT8 Reserved15; // Reserved [195]
|
|
UINT8 DeviceType; // Device type [196]
|
|
UINT8 DriverStrength; // I/O Driver Strength [197]
|
|
UINT8 OutOfInterruptTime; // Out-of-interrupt busy timing[198]
|
|
UINT8 PartitionSwitchTime; // Partition switching timing [199]
|
|
UINT8 PwrCl52M195V; // Power class for 52MHz at 1.95V [200]
|
|
UINT8 PwrCl26M195V; // Power class for 26MHz at 1.95V [201]
|
|
UINT8 PwrCl52M360V; // Power class for 52MHz at 3.6V [202]
|
|
UINT8 PwrCl26M360V; // Power class for 26MHz at 3.6V [203]
|
|
UINT8 Reserved16; // Reserved [204]
|
|
UINT8 MinPerfR4B26M; // Minimum Read Performance for 4bit at 26MHz [205]
|
|
UINT8 MinPerfW4B26M; // Minimum Write Performance for 4bit at 26MHz [206]
|
|
UINT8 MinPerfR8B26M4B52M; // Minimum Read Performance for 8bit at 26MHz, for 4bit at 52MHz [207]
|
|
UINT8 MinPerfW8B26M4B52M; // Minimum Write Performance for 8bit at 26MHz, for 4bit at 52MHz [208]
|
|
UINT8 MinPerfR8B52M; // Minimum Read Performance for 8bit at 52MHz [209]
|
|
UINT8 MinPerfW8B52M; // Minimum Write Performance for 8bit at 52MHz [210]
|
|
UINT8 Reserved17; // Reserved [211]
|
|
UINT8 SecCount[4]; // Sector Count [215:212]
|
|
UINT8 SleepNotificationTime; // Sleep Notification Timout [216]
|
|
UINT8 SATimeout; // Sleep/awake timeout [217]
|
|
UINT8 ProductionStateAwarenessTimeout; // Production state awareness timeout [218]
|
|
UINT8 SCVccq; // Sleep current (VCCQ) [219]
|
|
UINT8 SCVcc; // Sleep current (VCC) [220]
|
|
UINT8 HcWpGrpSize; // High-capacity write protect group size [221]
|
|
UINT8 RelWrSecC; // Reliable write sector count [222]
|
|
UINT8 EraseTimeoutMult; // High-capacity erase timeout [223]
|
|
UINT8 HcEraseGrpSize; // High-capacity erase unit size [224]
|
|
UINT8 AccSize; // Access size [225]
|
|
UINT8 BootSizeMult; // Boot partition size [226]
|
|
UINT8 Reserved18; // Reserved [227]
|
|
UINT8 BootInfo; // Boot information [228]
|
|
UINT8 SecTrimMult; // Secure TRIM Multiplier [229]
|
|
UINT8 SecEraseMult; // Secure Erase Multiplier [230]
|
|
UINT8 SecFeatureSupport; // Secure Feature support [231]
|
|
UINT8 TrimMult; // TRIM Multiplier [232]
|
|
UINT8 Reserved19; // Reserved [233]
|
|
UINT8 MinPerfDdrR8b52M; // Minimum Read Performance for 8bit at 52MHz in DDR mode [234]
|
|
UINT8 MinPerfDdrW8b52M; // Minimum Write Performance for 8bit at 52MHz in DDR mode [235]
|
|
UINT8 PwrCl200M130V; // Power class for 200MHz, at VCCQ=1.3V, VCC = 3.6V [236]
|
|
UINT8 PwrCl200M195V; // Power class for 200MHz at VCCQ=1.95V, VCC = 3.6V [237]
|
|
UINT8 PwrClDdr52M195V; // Power class for 52MHz, DDR at VCC= 1.95V [238]
|
|
UINT8 PwrClDdr52M360V; // Power class for 52MHz, DDR at VCC= 3.6V [239]
|
|
UINT8 Reserved20; // Reserved [240]
|
|
UINT8 IniTimeoutAp; // 1st initialization time after partitioning [241]
|
|
UINT8 CorrectlyPrgSectorsNum[4]; // Number of correctly programmed sectors [245:242]
|
|
UINT8 BkopsStatus; // Background operations status [246]
|
|
UINT8 PowerOffLongTime; // Power off notification(long) timeout [247]
|
|
UINT8 GenericCmd6Time; // Generic CMD6 timeout [248]
|
|
UINT8 CacheSize[4]; // Cache size [252:249]
|
|
UINT8 PwrClDdr200M360V; // Power class for 200MHz, DDR at VCC= 3.6V [253]
|
|
UINT8 FirmwareVersion[8]; // Firmware version [261:254]
|
|
UINT8 DeviceVersion[2]; // Device version [263:262]
|
|
UINT8 OptimalTrimUnitSize; // Optimal trim unit size[264]
|
|
UINT8 OptimalWriteSize; // Optimal write size [265]
|
|
UINT8 OptimalReadSize; // Optimal read size [266]
|
|
UINT8 PreEolInfo; // Pre EOL information [267]
|
|
UINT8 DeviceLifeTimeEstTypA; // Device life time estimation type A [268]
|
|
UINT8 DeviceLifeTimeEstTypB; // Device life time estimation type B [269]
|
|
UINT8 VendorProprietaryHealthReport[32]; // Vendor proprietary health report [301:270]
|
|
UINT8 NumOfFwSectorsProgrammed[4]; // Number of FW sectors correctly programmed [305:302]
|
|
UINT8 Reserved21[181]; // Reserved [486:306]
|
|
UINT8 FfuArg[4]; // FFU Argument [490:487]
|
|
UINT8 OperationCodeTimeout; // Operation codes timeout [491]
|
|
UINT8 FfuFeatures; // FFU features [492]
|
|
UINT8 SupportedModes; // Supported modes [493]
|
|
UINT8 ExtSupport; // Extended partitions attribute support [494]
|
|
UINT8 LargeUnitSizeM1; // Large Unit size [495]
|
|
UINT8 ContextCapabilities; // Context management capabilities [496]
|
|
UINT8 TagResSize; // Tag Resources Size [497]
|
|
UINT8 TagUnitSize; // Tag Unit Size [498]
|
|
UINT8 DataTagSupport; // Data Tag Support [499]
|
|
UINT8 MaxPackedWrites; // Max packed write commands [500]
|
|
UINT8 MaxPackedReads; // Max packed read commands[501]
|
|
UINT8 BkOpsSupport; // Background operations support [502]
|
|
UINT8 HpiFeatures; // HPI features [503]
|
|
UINT8 SupportedCmdSet; // Supported Command Sets [504]
|
|
UINT8 ExtSecurityErr; // Extended Security Commands Error [505]
|
|
UINT8 Reserved22[6]; // Reserved [511:506]
|
|
} EMMC_EXT_CSD;
|
|
|
|
#pragma pack()
|
|
|
|
#endif
|