audk/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h

552 lines
17 KiB
C

/** @file
This file contains the register definition of XHCI host controller.
Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef _EFI_XHCI_REG_H_
#define _EFI_XHCI_REG_H_
#define PCI_IF_XHCI 0x30
//
// PCI Configuration Registers
//
#define XHC_BAR_INDEX 0x00
#define XHC_PCI_BAR_OFFSET 0x10 // Memory Bar Register Offset
#define XHC_PCI_BAR_MASK 0xFFFF // Memory Base Address Mask
#define XHC_PCI_SBRN_OFFSET 0x60 // Serial Bus Release Number Register Offset
#define USB_HUB_CLASS_CODE 0x09
#define USB_HUB_SUBCLASS_CODE 0x00
#define XHC_CAP_USB_LEGACY 0x01
#define XHC_CAP_USB_DEBUG 0x0A
//============================================//
// XHCI register offset //
//============================================//
//
// Capability registers offset
//
#define XHC_CAPLENGTH_OFFSET 0x00 // Capability register length offset
#define XHC_HCIVERSION_OFFSET 0x02 // Interface Version Number 02-03h
#define XHC_HCSPARAMS1_OFFSET 0x04 // Structural Parameters 1
#define XHC_HCSPARAMS2_OFFSET 0x08 // Structural Parameters 2
#define XHC_HCSPARAMS3_OFFSET 0x0c // Structural Parameters 3
#define XHC_HCCPARAMS_OFFSET 0x10 // Capability Parameters
#define XHC_DBOFF_OFFSET 0x14 // Doorbell Offset
#define XHC_RTSOFF_OFFSET 0x18 // Runtime Register Space Offset
//
// Operational registers offset
//
#define XHC_USBCMD_OFFSET 0x0000 // USB Command Register Offset
#define XHC_USBSTS_OFFSET 0x0004 // USB Status Register Offset
#define XHC_PAGESIZE_OFFSET 0x0008 // USB Page Size Register Offset
#define XHC_DNCTRL_OFFSET 0x0014 // Device Notification Control Register Offset
#define XHC_CRCR_OFFSET 0x0018 // Command Ring Control Register Offset
#define XHC_DCBAAP_OFFSET 0x0030 // Device Context Base Address Array Pointer Register Offset
#define XHC_CONFIG_OFFSET 0x0038 // Configure Register Offset
#define XHC_PORTSC_OFFSET 0x0400 // Port Status and Control Register Offset
//
// Runtime registers offset
//
#define XHC_MFINDEX_OFFSET 0x00 // Microframe Index Register Offset
#define XHC_IMAN_OFFSET 0x20 // Interrupter X Management Register Offset
#define XHC_IMOD_OFFSET 0x24 // Interrupter X Moderation Register Offset
#define XHC_ERSTSZ_OFFSET 0x28 // Event Ring Segment Table Size Register Offset
#define XHC_ERSTBA_OFFSET 0x30 // Event Ring Segment Table Base Address Register Offset
#define XHC_ERDP_OFFSET 0x38 // Event Ring Dequeue Pointer Register Offset
//
// Debug registers offset
//
#define XHC_DC_DCCTRL 0x20
#define USBLEGSP_BIOS_SEMAPHORE BIT16 // HC BIOS Owned Semaphore
#define USBLEGSP_OS_SEMAPHORE BIT24 // HC OS Owned Semaphore
#pragma pack (1)
typedef struct {
UINT8 MaxSlots; // Number of Device Slots
UINT16 MaxIntrs:11; // Number of Interrupters
UINT16 Rsvd:5;
UINT8 MaxPorts; // Number of Ports
} HCSPARAMS1;
//
// Structural Parameters 1 Register Bitmap Definition
//
typedef union {
UINT32 Dword;
HCSPARAMS1 Data;
} XHC_HCSPARAMS1;
typedef struct {
UINT32 Ist:4; // Isochronous Scheduling Threshold
UINT32 Erst:4; // Event Ring Segment Table Max
UINT32 Rsvd:13;
UINT32 ScratchBufHi:5; // Max Scratchpad Buffers Hi
UINT32 Spr:1; // Scratchpad Restore
UINT32 ScratchBufLo:5; // Max Scratchpad Buffers Lo
} HCSPARAMS2;
//
// Structural Parameters 2 Register Bitmap Definition
//
typedef union {
UINT32 Dword;
HCSPARAMS2 Data;
} XHC_HCSPARAMS2;
typedef struct {
UINT16 Ac64:1; // 64-bit Addressing Capability
UINT16 Bnc:1; // BW Negotiation Capability
UINT16 Csz:1; // Context Size
UINT16 Ppc:1; // Port Power Control
UINT16 Pind:1; // Port Indicators
UINT16 Lhrc:1; // Light HC Reset Capability
UINT16 Ltc:1; // Latency Tolerance Messaging Capability
UINT16 Nss:1; // No Secondary SID Support
UINT16 Pae:1; // Parse All Event Data
UINT16 Rsvd:3;
UINT16 MaxPsaSize:4; // Maximum Primary Stream Array Size
UINT16 ExtCapReg; // xHCI Extended Capabilities Pointer
} HCCPARAMS;
//
// Capability Parameters Register Bitmap Definition
//
typedef union {
UINT32 Dword;
HCCPARAMS Data;
} XHC_HCCPARAMS;
#pragma pack ()
//
// Register Bit Definition
//
#define XHC_USBCMD_RUN BIT0 // Run/Stop
#define XHC_USBCMD_RESET BIT1 // Host Controller Reset
#define XHC_USBCMD_INTE BIT2 // Interrupter Enable
#define XHC_USBCMD_HSEE BIT3 // Host System Error Enable
#define XHC_USBSTS_HALT BIT0 // Host Controller Halted
#define XHC_USBSTS_HSE BIT2 // Host System Error
#define XHC_USBSTS_EINT BIT3 // Event Interrupt
#define XHC_USBSTS_PCD BIT4 // Port Change Detect
#define XHC_USBSTS_SSS BIT8 // Save State Status
#define XHC_USBSTS_RSS BIT9 // Restore State Status
#define XHC_USBSTS_SRE BIT10 // Save/Restore Error
#define XHC_USBSTS_CNR BIT11 // Host Controller Not Ready
#define XHC_USBSTS_HCE BIT12 // Host Controller Error
#define XHC_PAGESIZE_MASK 0xFFFF // Page Size
#define XHC_CRCR_RCS BIT0 // Ring Cycle State
#define XHC_CRCR_CS BIT1 // Command Stop
#define XHC_CRCR_CA BIT2 // Command Abort
#define XHC_CRCR_CRR BIT3 // Command Ring Running
#define XHC_CONFIG_MASK 0xFF // Command Ring Running
#define XHC_PORTSC_CCS BIT0 // Current Connect Status
#define XHC_PORTSC_PED BIT1 // Port Enabled/Disabled
#define XHC_PORTSC_OCA BIT3 // Over-current Active
#define XHC_PORTSC_RESET BIT4 // Port Reset
#define XHC_PORTSC_PLS (BIT5|BIT6|BIT7|BIT8) // Port Link State
#define XHC_PORTSC_PP BIT9 // Port Power
#define XHC_PORTSC_PS (BIT10|BIT11|BIT12|BIT13) // Port Speed
#define XHC_PORTSC_LWS BIT16 // Port Link State Write Strobe
#define XHC_PORTSC_CSC BIT17 // Connect Status Change
#define XHC_PORTSC_PEC BIT18 // Port Enabled/Disabled Change
#define XHC_PORTSC_WRC BIT19 // Warm Port Reset Change
#define XHC_PORTSC_OCC BIT20 // Over-Current Change
#define XHC_PORTSC_PRC BIT21 // Port Reset Change
#define XHC_PORTSC_PLC BIT22 // Port Link State Change
#define XHC_PORTSC_CEC BIT23 // Port Config Error Change
#define XHC_PORTSC_CAS BIT24 // Cold Attach Status
#define XHC_HUB_PORTSC_CCS BIT0 // Hub's Current Connect Status
#define XHC_HUB_PORTSC_PED BIT1 // Hub's Port Enabled/Disabled
#define XHC_HUB_PORTSC_OCA BIT3 // Hub's Over-current Active
#define XHC_HUB_PORTSC_RESET BIT4 // Hub's Port Reset
#define XHC_HUB_PORTSC_PP BIT9 // Hub's Port Power
#define XHC_HUB_PORTSC_CSC BIT16 // Hub's Connect Status Change
#define XHC_HUB_PORTSC_PEC BIT17 // Hub's Port Enabled/Disabled Change
#define XHC_HUB_PORTSC_OCC BIT19 // Hub's Over-Current Change
#define XHC_HUB_PORTSC_PRC BIT20 // Hub's Port Reset Change
#define XHC_HUB_PORTSC_BHRC BIT21 // Hub's Port Warm Reset Change
#define XHC_IMAN_IP BIT0 // Interrupt Pending
#define XHC_IMAN_IE BIT1 // Interrupt Enable
#define XHC_IMODI_MASK 0x0000FFFF // Interrupt Moderation Interval
#define XHC_IMODC_MASK 0xFFFF0000 // Interrupt Moderation Counter
//
// Hub Class Feature Selector for Clear Port Feature Request
// It's the extension of hub class feature selector of USB 2.0 in USB 3.0 Spec.
// For more details, Please refer to USB 3.0 Spec Table 10-7.
//
typedef enum {
Usb3PortBHPortReset = 28,
Usb3PortBHPortResetChange = 29
} XHC_PORT_FEATURE;
//
// Structure to map the hardware port states to the
// UEFI's port states.
//
typedef struct {
UINT32 HwState;
UINT16 UefiState;
} USB_PORT_STATE_MAP;
//
// Structure to map the hardware port states to feature selector for clear port feature request.
//
typedef struct {
UINT32 HwState;
UINT16 Selector;
} USB_CLEAR_PORT_MAP;
/**
Read 1-byte width XHCI capability register.
@param Xhc The XHCI Instance.
@param Offset The offset of the 1-byte width capability register.
@return The register content read.
@retval If err, return 0xFFFF.
**/
UINT8
XhcReadCapReg8 (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset
);
/**
Read 4-bytes width XHCI capability register.
@param Xhc The XHCI Instance.
@param Offset The offset of the 4-bytes width capability register.
@return The register content read.
@retval If err, return 0xFFFFFFFF.
**/
UINT32
XhcReadCapReg (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset
);
/**
Read 4-bytes width XHCI Operational register.
@param Xhc The XHCI Instance.
@param Offset The offset of the 4-bytes width operational register.
@return The register content read.
@retval If err, return 0xFFFFFFFF.
**/
UINT32
XhcReadOpReg (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset
);
/**
Write the data to the 4-bytes width XHCI operational register.
@param Xhc The XHCI Instance.
@param Offset The offset of the 4-bytes width operational register.
@param Data The data to write.
**/
VOID
XhcWriteOpReg (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset,
IN UINT32 Data
);
/**
Read XHCI runtime register.
@param Xhc The XHCI Instance.
@param Offset The offset of the runtime register.
@return The register content read
**/
UINT32
XhcReadRuntimeReg (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset
);
/**
Write the data to the XHCI runtime register.
@param Xhc The XHCI Instance.
@param Offset The offset of the runtime register.
@param Data The data to write.
**/
VOID
XhcWriteRuntimeReg (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset,
IN UINT32 Data
);
/**
Write the data to the XHCI door bell register.
@param Xhc The XHCI Instance.
@param Offset The offset of the door bell register.
@param Data The data to write.
**/
VOID
XhcWriteDoorBellReg (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset,
IN UINT32 Data
);
/**
Set one bit of the operational register while keeping other bits.
@param Xhc The XHCI Instance.
@param Offset The offset of the operational register.
@param Bit The bit mask of the register to set.
**/
VOID
XhcSetOpRegBit (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset,
IN UINT32 Bit
);
/**
Clear one bit of the operational register while keeping other bits.
@param Xhc The XHCI Instance.
@param Offset The offset of the operational register.
@param Bit The bit mask of the register to clear.
**/
VOID
XhcClearOpRegBit (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset,
IN UINT32 Bit
);
/**
Wait the operation register's bit as specified by Bit
to be set (or clear).
@param Xhc The XHCI Instance.
@param Offset The offset of the operational register.
@param Bit The bit of the register to wait for.
@param WaitToSet Wait the bit to set or clear.
@param Timeout The time to wait before abort (in millisecond, ms).
@retval EFI_SUCCESS The bit successfully changed by host controller.
@retval EFI_TIMEOUT The time out occurred.
**/
EFI_STATUS
XhcWaitOpRegBit (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset,
IN UINT32 Bit,
IN BOOLEAN WaitToSet,
IN UINT32 Timeout
);
/**
Read XHCI runtime register.
@param Xhc The XHCI Instance.
@param Offset The offset of the runtime register.
@return The register content read
**/
UINT32
XhcReadRuntimeReg (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset
);
/**
Write the data to the XHCI runtime register.
@param Xhc The XHCI Instance.
@param Offset The offset of the runtime register.
@param Data The data to write.
**/
VOID
XhcWriteRuntimeReg (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset,
IN UINT32 Data
);
/**
Set one bit of the runtime register while keeping other bits.
@param Xhc The XHCI Instance.
@param Offset The offset of the runtime register.
@param Bit The bit mask of the register to set.
**/
VOID
XhcSetRuntimeRegBit (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset,
IN UINT32 Bit
);
/**
Clear one bit of the runtime register while keeping other bits.
@param Xhc The XHCI Instance.
@param Offset The offset of the runtime register.
@param Bit The bit mask of the register to set.
**/
VOID
XhcClearRuntimeRegBit (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset,
IN UINT32 Bit
);
/**
Read XHCI extended capability register.
@param Xhc The XHCI Instance.
@param Offset The offset of the extended capability register.
@return The register content read
**/
UINT32
XhcReadExtCapReg (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset
);
/**
Whether the XHCI host controller is halted.
@param Xhc The XHCI Instance.
@retval TRUE The controller is halted.
@retval FALSE It isn't halted.
**/
BOOLEAN
XhcIsHalt (
IN USB_XHCI_INSTANCE *Xhc
);
/**
Whether system error occurred.
@param Xhc The XHCI Instance.
@retval TRUE System error happened.
@retval FALSE No system error.
**/
BOOLEAN
XhcIsSysError (
IN USB_XHCI_INSTANCE *Xhc
);
/**
Reset the XHCI host controller.
@param Xhc The XHCI Instance.
@param Timeout Time to wait before abort (in millisecond, ms).
@retval EFI_SUCCESS The XHCI host controller is reset.
@return Others Failed to reset the XHCI before Timeout.
**/
EFI_STATUS
XhcResetHC (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Timeout
);
/**
Halt the XHCI host controller.
@param Xhc The XHCI Instance.
@param Timeout Time to wait before abort (in millisecond, ms).
@return EFI_SUCCESS The XHCI host controller is halt.
@return EFI_TIMEOUT Failed to halt the XHCI before Timeout.
**/
EFI_STATUS
XhcHaltHC (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Timeout
);
/**
Set the XHCI host controller to run.
@param Xhc The XHCI Instance.
@param Timeout Time to wait before abort (in millisecond, ms).
@return EFI_SUCCESS The XHCI host controller is running.
@return EFI_TIMEOUT Failed to set the XHCI to run before Timeout.
**/
EFI_STATUS
XhcRunHC (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Timeout
);
/**
Calculate the offset of the XHCI capability.
@param Xhc The XHCI Instance.
@param CapId The XHCI Capability ID.
@return The offset of XHCI legacy support capability register.
**/
UINT32
XhcGetCapabilityAddr (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT8 CapId
);
#endif