tyler.durden/audk
1
0
Fork 0
mirror of https://github.com/acidanthera/audk.git synced 2025-10-31 19:23:54 +01:00
Code Issues Packages Projects Releases Wiki Activity
audk/EdkModulePkg/Universal/Console/Terminal/Dxe/Terminal.c
vanjeff 93b0fbc8a1 Add some definitions for efi event in Uefi/UefiSpec.h to follow spec. 
Changed old event definitions reference to these new event definitions.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@2729 6f19259b-4bc3-4df7-8a09-765794883524
2007-06-25 08:54:54 +00:00

1188 lines
33 KiB
C
Raw Blame History

/*++
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
Terminal.c
Abstract:
Revision History:
--*/
#include "Terminal.h"
//
// Globals
//
EFI_DRIVER_BINDING_PROTOCOL gTerminalDriverBinding = {
TerminalDriverBindingSupported,
TerminalDriverBindingStart,
TerminalDriverBindingStop,
0xa,
NULL,
NULL
};
EFI_STATUS
EFIAPI
TerminalDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_SERIAL_IO_PROTOCOL *SerialIo;
VENDOR_DEVICE_PATH *Node;
//
// If remaining device path is not NULL, then make sure it is a
// device path that describes a terminal communications protocol.
//
if (RemainingDevicePath != NULL) {
Node = (VENDOR_DEVICE_PATH *) RemainingDevicePath;
if (Node->Header.Type != MESSAGING_DEVICE_PATH ||
Node->Header.SubType != MSG_VENDOR_DP ||
DevicePathNodeLength(&Node->Header) != sizeof(VENDOR_DEVICE_PATH)) {
return EFI_UNSUPPORTED;
}
//
// only supports PC ANSI, VT100, VT100+ and VT-UTF8 terminal types
//
if (!CompareGuid (&Node->Guid, &gEfiPcAnsiGuid) &&
!CompareGuid (&Node->Guid, &gEfiVT100Guid) &&
!CompareGuid (&Node->Guid, &gEfiVT100PlusGuid) &&
!CompareGuid (&Node->Guid, &gEfiVTUTF8Guid)) {
return EFI_UNSUPPORTED;
}
}
//
// Open the IO Abstraction(s) needed to perform the supported test
//
Status = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
(VOID **) &ParentDevicePath,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
if (EFI_ERROR (Status)) {
return Status;
}
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
//
// The Controller must support the Serial I/O Protocol.
// This driver is a bus driver with at most 1 child device, so it is
// ok for it to be already started.
//
Status = gBS->OpenProtocol (
Controller,
&gEfiSerialIoProtocolGuid,
(VOID **) &SerialIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
if (EFI_ERROR (Status)) {
return Status;
}
//
// Close the I/O Abstraction(s) used to perform the supported test
//
gBS->CloseProtocol (
Controller,
&gEfiSerialIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
return Status;
}
EFI_STATUS
EFIAPI
TerminalDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
/*++
Routine Description:
Start the controller.
Arguments:
This - A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
Controller - The handle of the controller to start.
RemainingDevicePath - A pointer to the remaining portion of a devcie path.
Returns:
EFI_SUCCESS.
--*/
{
EFI_STATUS Status;
EFI_SERIAL_IO_PROTOCOL *SerialIo;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
VENDOR_DEVICE_PATH *Node;
VENDOR_DEVICE_PATH *DefaultNode;
EFI_SERIAL_IO_MODE *Mode;
UINTN SerialInTimeOut;
TERMINAL_DEV *TerminalDevice;
UINT8 TerminalType;
EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer;
UINTN EntryCount;
UINTN Index;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
TerminalDevice = NULL;
DefaultNode = NULL;
//
// Get the Device Path Protocol to build the device path of the child device
//
Status = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
(VOID **) &ParentDevicePath,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
return Status;
}
//
// Report that the remote terminal is being enabled
//
DevicePath = ParentDevicePath;
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_PC_ENABLE,
DevicePath
);
//
// Open the Serial I/O Protocol BY_DRIVER. It might already be started.
//
Status = gBS->OpenProtocol (
Controller,
&gEfiSerialIoProtocolGuid,
(VOID **) &SerialIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
return Status;
}
if (Status != EFI_ALREADY_STARTED) {
//
// If Serial I/O is not already open by this driver, then tag the handle
// with the Terminal Driver GUID and update the ConInDev, ConOutDev, and
// StdErrDev variables with the list of possible terminal types on this
// serial port.
//
Status = gBS->OpenProtocol (
Controller,
&gEfiCallerIdGuid,
NULL,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_TEST_PROTOCOL
);
if (EFI_ERROR (Status)) {
Status = gBS->InstallMultipleProtocolInterfaces (
&Controller,
&gEfiCallerIdGuid,
DuplicateDevicePath (ParentDevicePath),
NULL
);
if (EFI_ERROR (Status)) {
goto Error;
}
//
// if the serial device is a hot plug device, do not update the
// ConInDev, ConOutDev, and StdErrDev variables.
//
Status = gBS->OpenProtocol (
Controller,
&gEfiHotPlugDeviceGuid,
NULL,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_TEST_PROTOCOL
);
if (EFI_ERROR (Status)) {
TerminalUpdateConsoleDevVariable ((CHAR16 *)VarConsoleInpDev, ParentDevicePath);
TerminalUpdateConsoleDevVariable ((CHAR16 *)VarConsoleOutDev, ParentDevicePath);
TerminalUpdateConsoleDevVariable ((CHAR16 *)VarErrorOutDev, ParentDevicePath);
}
}
}
//
// Make sure a child handle does not already exist. This driver can only
// produce one child per serial port.
//
Status = gBS->OpenProtocolInformation (
Controller,
&gEfiSerialIoProtocolGuid,
&OpenInfoBuffer,
&EntryCount
);
if (!EFI_ERROR (Status)) {
Status = EFI_SUCCESS;
for (Index = 0; Index < EntryCount; Index++) {
if (OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) {
Status = EFI_ALREADY_STARTED;
}
}
FreePool (OpenInfoBuffer);
if (EFI_ERROR (Status)) {
return Status;
}
}
//
// If RemainingDevicePath is NULL, then create default device path node
//
if (RemainingDevicePath == NULL) {
DefaultNode = AllocatePool (sizeof (VENDOR_DEVICE_PATH));
if (DefaultNode == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
CopyMem (&DefaultNode->Guid, &gEfiPcAnsiGuid, sizeof (EFI_GUID));
RemainingDevicePath = (EFI_DEVICE_PATH_PROTOCOL*) DefaultNode;
}
//
// Use the RemainingDevicePath to determine the terminal type
//
Node = (VENDOR_DEVICE_PATH *) RemainingDevicePath;
if (CompareGuid (&Node->Guid, &gEfiPcAnsiGuid)) {
TerminalType = PcAnsiType;
} else if (CompareGuid (&Node->Guid, &gEfiVT100Guid)) {
TerminalType = VT100Type;
} else if (CompareGuid (&Node->Guid, &gEfiVT100PlusGuid)) {
TerminalType = VT100PlusType;
} else if (CompareGuid (&Node->Guid, &gEfiVTUTF8Guid)) {
TerminalType = VTUTF8Type;
} else {
goto Error;
}
//
// Initialize the Terminal Dev
//
TerminalDevice = AllocatePool (sizeof (TERMINAL_DEV));
if (TerminalDevice == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
ZeroMem (TerminalDevice, sizeof (TERMINAL_DEV));
TerminalDevice->Signature = TERMINAL_DEV_SIGNATURE;
TerminalDevice->TerminalType = TerminalType;
TerminalDevice->SerialIo = SerialIo;
//
// Simple Input Protocol
//
TerminalDevice->SimpleInput.Reset = TerminalConInReset;
TerminalDevice->SimpleInput.ReadKeyStroke = TerminalConInReadKeyStroke;
Status = gBS->CreateEvent (
EVT_NOTIFY_WAIT,
TPL_NOTIFY,
TerminalConInWaitForKey,
&TerminalDevice->SimpleInput,
&TerminalDevice->SimpleInput.WaitForKey
);
if (EFI_ERROR (Status)) {
goto Error;
}
//
// initialize the FIFO buffer used for accommodating
// the pre-read pending characters
//
InitializeRawFiFo (TerminalDevice);
InitializeUnicodeFiFo (TerminalDevice);
InitializeEfiKeyFiFo (TerminalDevice);
//
// Set the timeout value of serial buffer for
// keystroke response performance issue
//
Mode = TerminalDevice->SerialIo->Mode;
SerialInTimeOut = 0;
if (Mode->BaudRate != 0) {
SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) * 2 * 1000000 / (UINTN) Mode->BaudRate;
}
Status = TerminalDevice->SerialIo->SetAttributes (
TerminalDevice->SerialIo,
Mode->BaudRate,
Mode->ReceiveFifoDepth,
(UINT32) SerialInTimeOut,
(EFI_PARITY_TYPE) (Mode->Parity),
(UINT8) Mode->DataBits,
(EFI_STOP_BITS_TYPE) (Mode->StopBits)
);
if (EFI_ERROR (Status)) {
//
// if set attributes operation fails, invalidate
// the value of SerialInTimeOut,thus make it
// inconsistent with the default timeout value
// of serial buffer. This will invoke the recalculation
// in the readkeystroke routine.
//
TerminalDevice->SerialInTimeOut = 0;
} else {
TerminalDevice->SerialInTimeOut = SerialInTimeOut;
}
//
// Build the device path for the child device
//
Status = SetTerminalDevicePath (
TerminalDevice->TerminalType,
ParentDevicePath,
&TerminalDevice->DevicePath
);
if (EFI_ERROR (Status)) {
goto Error;
}
DevicePath = TerminalDevice->DevicePath;
Status = TerminalDevice->SimpleInput.Reset (
&TerminalDevice->SimpleInput,
FALSE
);
if (EFI_ERROR (Status)) {
//
// Need to report Error Code first
//
goto ReportError;
}
//
// Simple Text Output Protocol
//
TerminalDevice->SimpleTextOutput.Reset = TerminalConOutReset;
TerminalDevice->SimpleTextOutput.OutputString = TerminalConOutOutputString;
TerminalDevice->SimpleTextOutput.TestString = TerminalConOutTestString;
TerminalDevice->SimpleTextOutput.QueryMode = TerminalConOutQueryMode;
TerminalDevice->SimpleTextOutput.SetMode = TerminalConOutSetMode;
TerminalDevice->SimpleTextOutput.SetAttribute = TerminalConOutSetAttribute;
TerminalDevice->SimpleTextOutput.ClearScreen = TerminalConOutClearScreen;
TerminalDevice->SimpleTextOutput.SetCursorPosition = TerminalConOutSetCursorPosition;
TerminalDevice->SimpleTextOutput.EnableCursor = TerminalConOutEnableCursor;
TerminalDevice->SimpleTextOutput.Mode = &TerminalDevice->SimpleTextOutputMode;
TerminalDevice->SimpleTextOutputMode.MaxMode = 1;
//
// For terminal devices, cursor is always visible
//
TerminalDevice->SimpleTextOutputMode.CursorVisible = TRUE;
TerminalDevice->SimpleTextOutputMode.Attribute = EFI_TEXT_ATTR (EFI_LIGHTGRAY, EFI_BLACK);
Status = TerminalDevice->SimpleTextOutput.Reset (
&TerminalDevice->SimpleTextOutput,
FALSE
);
if (EFI_ERROR (Status)) {
goto ReportError;
}
Status = TerminalDevice->SimpleTextOutput.SetMode (
&TerminalDevice->SimpleTextOutput,
0
);
if (EFI_ERROR (Status)) {
goto ReportError;
}
Status = TerminalDevice->SimpleTextOutput.EnableCursor (
&TerminalDevice->SimpleTextOutput,
TRUE
);
if (EFI_ERROR (Status)) {
goto ReportError;
}
//
//
//
TerminalDevice->InputState = INPUT_STATE_DEFAULT;
TerminalDevice->ResetState = RESET_STATE_DEFAULT;
Status = gBS->CreateEvent (
EVT_TIMER,
TPL_CALLBACK,
NULL,
NULL,
&TerminalDevice->TwoSecondTimeOut
);
//
// Build the component name for the child device
//
TerminalDevice->ControllerNameTable = NULL;
switch (TerminalDevice->TerminalType) {
case PcAnsiType:
AddUnicodeString (
"eng",
gTerminalComponentName.SupportedLanguages,
&TerminalDevice->ControllerNameTable,
(CHAR16 *)L"PC-ANSI Serial Console"
);
break;
case VT100Type:
AddUnicodeString (
"eng",
gTerminalComponentName.SupportedLanguages,
&TerminalDevice->ControllerNameTable,
(CHAR16 *)L"VT-100 Serial Console"
);
break;
case VT100PlusType:
AddUnicodeString (
"eng",
gTerminalComponentName.SupportedLanguages,
&TerminalDevice->ControllerNameTable,
(CHAR16 *)L"VT-100+ Serial Console"
);
break;
case VTUTF8Type:
AddUnicodeString (
"eng",
gTerminalComponentName.SupportedLanguages,
&TerminalDevice->ControllerNameTable,
(CHAR16 *)L"VT-UTF8 Serial Console"
);
break;
}
//
// Install protocol interfaces for the serial device.
//
Status = gBS->InstallMultipleProtocolInterfaces (
&TerminalDevice->Handle,
&gEfiDevicePathProtocolGuid,
TerminalDevice->DevicePath,
&gEfiSimpleTextInProtocolGuid,
&TerminalDevice->SimpleInput,
&gEfiSimpleTextOutProtocolGuid,
&TerminalDevice->SimpleTextOutput,
NULL
);
if (EFI_ERROR (Status)) {
goto Error;
}
//
// if the serial device is a hot plug device, attaches the HotPlugGuid
// onto the terminal device handle.
//
Status = gBS->OpenProtocol (
Controller,
&gEfiHotPlugDeviceGuid,
NULL,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_TEST_PROTOCOL
);
if (!EFI_ERROR (Status)) {
Status = gBS->InstallMultipleProtocolInterfaces (
&TerminalDevice->Handle,
&gEfiHotPlugDeviceGuid,
NULL,
NULL
);
}
//
// Register the Parent-Child relationship via
// EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
//
Status = gBS->OpenProtocol (
Controller,
&gEfiSerialIoProtocolGuid,
(VOID **) &TerminalDevice->SerialIo,
This->DriverBindingHandle,
TerminalDevice->Handle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
if (EFI_ERROR (Status)) {
goto Error;
}
if (DefaultNode != NULL) {
FreePool (DefaultNode);
}
return EFI_SUCCESS;
ReportError:
//
// Report error code before exiting
//
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
EFI_PERIPHERAL_LOCAL_CONSOLE | EFI_P_EC_CONTROLLER_ERROR,
DevicePath
);
Error:
//
// Use the Stop() function to free all resources allocated in Start()
//
if (TerminalDevice != NULL) {
if (TerminalDevice->Handle != NULL) {
This->Stop (This, Controller, 1, &TerminalDevice->Handle);
} else {
if (TerminalDevice->TwoSecondTimeOut != NULL) {
gBS->CloseEvent (TerminalDevice->TwoSecondTimeOut);
}
if (TerminalDevice->SimpleInput.WaitForKey != NULL) {
gBS->CloseEvent (TerminalDevice->SimpleInput.WaitForKey);
}
if (TerminalDevice->ControllerNameTable != NULL) {
FreeUnicodeStringTable (TerminalDevice->ControllerNameTable);
}
if (TerminalDevice->DevicePath != NULL) {
FreePool (TerminalDevice->DevicePath);
}
FreePool (TerminalDevice);
}
}
if (DefaultNode != NULL) {
FreePool (DefaultNode);
}
This->Stop (This, Controller, 0, NULL);
return Status;
}
EFI_STATUS
EFIAPI
TerminalDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
/*++
Routine Description:
Stop a device controller.
Arguments:
This - A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
Controller - A handle to the device being stopped.
NumberOfChildren - The number of child device handles in ChildHandleBuffer.
ChildHandleBuffer - An array of child handles to be freed.
Returns:
EFI_SUCCESS - Operation successful.
EFI_DEVICE_ERROR - Devices error.
--*/
{
EFI_STATUS Status;
UINTN Index;
BOOLEAN AllChildrenStopped;
EFI_SIMPLE_TEXT_OUT_PROTOCOL *SimpleTextOutput;
TERMINAL_DEV *TerminalDevice;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_SERIAL_IO_PROTOCOL *SerialIo;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
Status = gBS->HandleProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
(VOID **) &DevicePath
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Report that the remote terminal is being disabled
//
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_PC_DISABLE,
DevicePath
);
//
// Complete all outstanding transactions to Controller.
// Don't allow any new transaction to Controller to be started.
//
if (NumberOfChildren == 0) {
//
// Close the bus driver
//
Status = gBS->OpenProtocol (
Controller,
&gEfiCallerIdGuid,
(VOID **) &ParentDevicePath,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (!EFI_ERROR (Status)) {
//
// Remove Parent Device Path from
// the Console Device Environment Variables
//
TerminalRemoveConsoleDevVariable ((CHAR16 *)VarConsoleInpDev, ParentDevicePath);
TerminalRemoveConsoleDevVariable ((CHAR16 *)VarConsoleOutDev, ParentDevicePath);
TerminalRemoveConsoleDevVariable ((CHAR16 *)VarErrorOutDev, ParentDevicePath);
//
// Uninstall the Terminal Driver's GUID Tag from the Serial controller
//
Status = gBS->UninstallMultipleProtocolInterfaces (
Controller,
&gEfiCallerIdGuid,
ParentDevicePath,
NULL
);
//
// Free the ParentDevicePath that was duplicated in Start()
//
if (!EFI_ERROR (Status)) {
FreePool (ParentDevicePath);
}
}
gBS->CloseProtocol (
Controller,
&gEfiSerialIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
return EFI_SUCCESS;
}
AllChildrenStopped = TRUE;
for (Index = 0; Index < NumberOfChildren; Index++) {
Status = gBS->OpenProtocol (
ChildHandleBuffer[Index],
&gEfiSimpleTextOutProtocolGuid,
(VOID **) &SimpleTextOutput,
This->DriverBindingHandle,
ChildHandleBuffer[Index],
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (!EFI_ERROR (Status)) {
TerminalDevice = TERMINAL_CON_OUT_DEV_FROM_THIS (SimpleTextOutput);
gBS->CloseProtocol (
Controller,
&gEfiSerialIoProtocolGuid,
This->DriverBindingHandle,
ChildHandleBuffer[Index]
);
Status = gBS->UninstallMultipleProtocolInterfaces (
ChildHandleBuffer[Index],
&gEfiSimpleTextInProtocolGuid,
&TerminalDevice->SimpleInput,
&gEfiSimpleTextOutProtocolGuid,
&TerminalDevice->SimpleTextOutput,
&gEfiDevicePathProtocolGuid,
TerminalDevice->DevicePath,
NULL
);
if (EFI_ERROR (Status)) {
gBS->OpenProtocol (
Controller,
&gEfiSerialIoProtocolGuid,
(VOID **) &SerialIo,
This->DriverBindingHandle,
ChildHandleBuffer[Index],
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
} else {
if (TerminalDevice->ControllerNameTable != NULL) {
FreeUnicodeStringTable (TerminalDevice->ControllerNameTable);
}
Status = gBS->OpenProtocol (
ChildHandleBuffer[Index],
&gEfiHotPlugDeviceGuid,
NULL,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_TEST_PROTOCOL
);
if (!EFI_ERROR (Status)) {
Status = gBS->UninstallMultipleProtocolInterfaces (
ChildHandleBuffer[Index],
&gEfiHotPlugDeviceGuid,
NULL,
NULL
);
} else {
Status = EFI_SUCCESS;
}
gBS->CloseEvent (TerminalDevice->TwoSecondTimeOut);
gBS->CloseEvent (TerminalDevice->SimpleInput.WaitForKey);
FreePool (TerminalDevice->DevicePath);
FreePool (TerminalDevice);
}
}
if (EFI_ERROR (Status)) {
AllChildrenStopped = FALSE;
}
}
if (!AllChildrenStopped) {
return EFI_DEVICE_ERROR;
}
return EFI_SUCCESS;
}
VOID
TerminalUpdateConsoleDevVariable (
IN CHAR16 *VariableName,
IN EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath
)
{
EFI_STATUS Status;
UINTN VariableSize;
UINT8 TerminalType;
EFI_DEVICE_PATH_PROTOCOL *Variable;
EFI_DEVICE_PATH_PROTOCOL *NewVariable;
EFI_DEVICE_PATH_PROTOCOL *TempDevicePath;
Variable = NULL;
//
// Get global variable and its size according to the name given.
//
Variable = TerminalGetVariableAndSize (
VariableName,
&gEfiGlobalVariableGuid,
&VariableSize
);
//
// Append terminal device path onto the variable.
//
for (TerminalType = PcAnsiType; TerminalType <= VTUTF8Type; TerminalType++) {
SetTerminalDevicePath (TerminalType, ParentDevicePath, &TempDevicePath);
NewVariable = AppendDevicePathInstance (Variable, TempDevicePath);
if (Variable != NULL) {
FreePool (Variable);
}
if (TempDevicePath != NULL) {
FreePool (TempDevicePath);
}
Variable = NewVariable;
}
VariableSize = GetDevicePathSize (Variable);
Status = gRT->SetVariable (
VariableName,
&gEfiGlobalVariableGuid,
EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
VariableSize,
Variable
);
ASSERT_EFI_ERROR (Status);
FreePool (Variable);
return ;
}
VOID
TerminalRemoveConsoleDevVariable (
IN CHAR16 *VariableName,
IN EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath
)
/*++
Routine Description:
Remove console device variable.
Arguments:
VariableName - A pointer to the variable name.
ParentDevicePath - A pointer to the parent device path.
Returns:
--*/
{
EFI_STATUS Status;
BOOLEAN FoundOne;
BOOLEAN Match;
UINTN VariableSize;
UINTN InstanceSize;
UINT8 TerminalType;
EFI_DEVICE_PATH_PROTOCOL *Instance;
EFI_DEVICE_PATH_PROTOCOL *Variable;
EFI_DEVICE_PATH_PROTOCOL *OriginalVariable;
EFI_DEVICE_PATH_PROTOCOL *NewVariable;
EFI_DEVICE_PATH_PROTOCOL *SavedNewVariable;
EFI_DEVICE_PATH_PROTOCOL *TempDevicePath;
Variable = NULL;
Instance = NULL;
//
// Get global variable and its size according to the name given.
//
Variable = TerminalGetVariableAndSize (
VariableName,
&gEfiGlobalVariableGuid,
&VariableSize
);
if (Variable == NULL) {
return ;
}
FoundOne = FALSE;
OriginalVariable = Variable;
NewVariable = NULL;
//
// Get first device path instance from Variable
//
Instance = GetNextDevicePathInstance (&Variable, &InstanceSize);
if (Instance == NULL) {
FreePool (OriginalVariable);
return ;
}
//
// Loop through all the device path instances of Variable
//
do {
//
// Loop through all the terminal types that this driver supports
//
Match = FALSE;
for (TerminalType = PcAnsiType; TerminalType <= VTUTF8Type; TerminalType++) {
SetTerminalDevicePath (TerminalType, ParentDevicePath, &TempDevicePath);
//
// Compare the genterated device path to the current device path instance
//
if (TempDevicePath != NULL) {
if (CompareMem (Instance, TempDevicePath, InstanceSize) == 0) {
Match = TRUE;
FoundOne = TRUE;
}
FreePool (TempDevicePath);
}
}
//
// If a match was not found, then keep the current device path instance
//
if (!Match) {
SavedNewVariable = NewVariable;
NewVariable = AppendDevicePathInstance (NewVariable, Instance);
if (SavedNewVariable != NULL) {
FreePool (SavedNewVariable);
}
}
//
// Get next device path instance from Variable
//
FreePool (Instance);
Instance = GetNextDevicePathInstance (&Variable, &InstanceSize);
} while (Instance != NULL);
FreePool (OriginalVariable);
if (FoundOne) {
VariableSize = GetDevicePathSize (NewVariable);
Status = gRT->SetVariable (
VariableName,
&gEfiGlobalVariableGuid,
EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
VariableSize,
NewVariable
);
ASSERT_EFI_ERROR (Status);
}
if (NewVariable != NULL) {
FreePool (NewVariable);
}
return ;
}
VOID *
TerminalGetVariableAndSize (
IN CHAR16 *Name,
IN EFI_GUID *VendorGuid,
OUT UINTN *VariableSize
)
/*++
Routine Description:
Read the EFI variable (VendorGuid/Name) and return a dynamically allocated
buffer, and the size of the buffer. On failure return NULL.
Arguments:
Name - String part of EFI variable name
VendorGuid - GUID part of EFI variable name
VariableSize - Returns the size of the EFI variable that was read
Returns:
Dynamically allocated memory that contains a copy of the EFI variable.
Caller is repsoncible freeing the buffer.
NULL - Variable was not read
--*/
{
EFI_STATUS Status;
UINTN BufferSize;
VOID *Buffer;
Buffer = NULL;
//
// Pass in a small size buffer to find the actual variable size.
//
BufferSize = 1;
Buffer = AllocatePool (BufferSize);
if (Buffer == NULL) {
*VariableSize = 0;
return NULL;
}
Status = gRT->GetVariable (Name, VendorGuid, NULL, &BufferSize, Buffer);
if (Status == EFI_SUCCESS) {
*VariableSize = BufferSize;
return Buffer;
} else if (Status == EFI_BUFFER_TOO_SMALL) {
//
// Allocate the buffer to return
//
FreePool (Buffer);
Buffer = AllocatePool (BufferSize);
if (Buffer == NULL) {
*VariableSize = 0;
return NULL;
}
//
// Read variable into the allocated buffer.
//
Status = gRT->GetVariable (Name, VendorGuid, NULL, &BufferSize, Buffer);
if (EFI_ERROR (Status)) {
BufferSize = 0;
FreePool (Buffer);
Buffer = NULL;
}
} else {
//
// Variable not found or other errors met.
//
BufferSize = 0;
FreePool (Buffer);
Buffer = NULL;
}
*VariableSize = BufferSize;
return Buffer;
}
EFI_STATUS
SetTerminalDevicePath (
IN UINT8 TerminalType,
IN EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath,
OUT EFI_DEVICE_PATH_PROTOCOL **TerminalDevicePath
)
{
VENDOR_DEVICE_PATH Node;
*TerminalDevicePath = NULL;
Node.Header.Type = MESSAGING_DEVICE_PATH;
Node.Header.SubType = MSG_VENDOR_DP;
//
// generate terminal device path node according to terminal type.
//
switch (TerminalType) {
case PcAnsiType:
CopyMem (
&Node.Guid,
&gEfiPcAnsiGuid,
sizeof (EFI_GUID)
);
break;
case VT100Type:
CopyMem (
&Node.Guid,
&gEfiVT100Guid,
sizeof (EFI_GUID)
);
break;
case VT100PlusType:
CopyMem (
&Node.Guid,
&gEfiVT100PlusGuid,
sizeof (EFI_GUID)
);
break;
case VTUTF8Type:
CopyMem (
&Node.Guid,
&gEfiVTUTF8Guid,
sizeof (EFI_GUID)
);
break;
default:
return EFI_UNSUPPORTED;
break;
}
SetDevicePathNodeLength (
&Node.Header,
sizeof (VENDOR_DEVICE_PATH)
);
//
// append the terminal node onto parent device path
// to generate a complete terminal device path.
//
*TerminalDevicePath = AppendDevicePathNode (
ParentDevicePath,
(EFI_DEVICE_PATH_PROTOCOL *) &Node
);
if (*TerminalDevicePath == NULL) {
return EFI_OUT_OF_RESOURCES;
}
return EFI_SUCCESS;
}
VOID
InitializeRawFiFo (
IN TERMINAL_DEV *TerminalDevice
)
{
//
// Make the raw fifo empty.
//
TerminalDevice->RawFiFo.Head = TerminalDevice->RawFiFo.Tail;
}
VOID
InitializeUnicodeFiFo (
IN TERMINAL_DEV *TerminalDevice
)
{
//
// Make the unicode fifo empty
//
TerminalDevice->UnicodeFiFo.Head = TerminalDevice->UnicodeFiFo.Tail;
}
VOID
InitializeEfiKeyFiFo (
IN TERMINAL_DEV *TerminalDevice
)
{
//
// Make the efi key fifo empty
//
TerminalDevice->EfiKeyFiFo.Head = TerminalDevice->EfiKeyFiFo.Tail;
}
Reference in New Issue View Git Blame Copy Permalink