mirror of https://github.com/acidanthera/audk.git
178 lines
7.4 KiB
Plaintext
178 lines
7.4 KiB
Plaintext
/** @file
|
||
Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
|
||
This program and the accompanying materials
|
||
are licensed and made available under the terms and conditions of the BSD License
|
||
which accompanies this distribution. The full text of the license may be found at
|
||
http://opensource.org/licenses/bsd-license.php
|
||
|
||
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
||
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
||
|
||
**/
|
||
|
||
Device(IOTD) {
|
||
Name(_HID, "MSFT8000")
|
||
Name(_CID, "MSFT8000")
|
||
|
||
Name(_CRS, ResourceTemplate() {
|
||
// Index 0
|
||
SPISerialBus( // Pin 5, 7, 9 , 11 of JP1 for SIO_SPI
|
||
1, // Device selection
|
||
PolarityLow, // Device selection polarity
|
||
FourWireMode, // wiremode
|
||
8, // databit len
|
||
ControllerInitiated, // slave mode
|
||
8000000, // Connection speed
|
||
ClockPolarityLow, // Clock polarity
|
||
ClockPhaseSecond, // clock phase
|
||
"\\_SB.SPI1", // ResourceSource: SPI bus controller name
|
||
0, // ResourceSourceIndex
|
||
ResourceConsumer, // Resource usage
|
||
JSPI, // DescriptorName: creates name for offset of resource descriptor
|
||
) // Vendor Data
|
||
|
||
// Index 1
|
||
I2CSerialBus( // Pin 13, 15 of JP1, for SIO_I2C5 (signal)
|
||
0x00, // SlaveAddress: bus address (TBD)
|
||
, // SlaveMode: default to ControllerInitiated
|
||
400000, // ConnectionSpeed: in Hz
|
||
, // Addressing Mode: default to 7 bit
|
||
"\\_SB.I2C6", // ResourceSource: I2C bus controller name (For MinnowBoard Max, hardware I2C5(0-based) is reported as ACPI I2C6(1-based))
|
||
,
|
||
,
|
||
JI2C, // Descriptor Name: creates name for offset of resource descriptor
|
||
) // VendorData
|
||
|
||
// Index 2
|
||
UARTSerialBus( // Pin 17, 19 of JP1, for SIO_UART2
|
||
115200, // InitialBaudRate: in bits ber second
|
||
, // BitsPerByte: default to 8 bits
|
||
, // StopBits: Defaults to one bit
|
||
0xfc, // LinesInUse: 8 1-bit flags to declare line enabled
|
||
, // IsBigEndian: default to LittleEndian
|
||
, // Parity: Defaults to no parity
|
||
, // FlowControl: Defaults to no flow control
|
||
32, // ReceiveBufferSize
|
||
32, // TransmitBufferSize
|
||
"\\_SB.URT2", // ResourceSource: UART bus controller name
|
||
,
|
||
,
|
||
UAR2, // DescriptorName: creates name for offset of resource descriptor
|
||
)
|
||
|
||
// Index 3
|
||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {0} // Pin 21 of JP1 (GPIO_S5[00])
|
||
// Index 4
|
||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {0}
|
||
|
||
// Index 5
|
||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {1} // Pin 23 of JP1 (GPIO_S5[01])
|
||
// Index 6
|
||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {1}
|
||
|
||
// Index 7
|
||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO2",) {2} // Pin 25 of JP1 (GPIO_S5[02])
|
||
// Index 8
|
||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO2",) {2}
|
||
|
||
// Index 9
|
||
UARTSerialBus( // Pin 6, 8, 10, 12 of JP1, for SIO_UART1
|
||
115200, // InitialBaudRate: in bits ber second
|
||
, // BitsPerByte: default to 8 bits
|
||
, // StopBits: Defaults to one bit
|
||
0xfc, // LinesInUse: 8 1-bit flags to declare line enabled
|
||
, // IsBigEndian: default to LittleEndian
|
||
, // Parity: Defaults to no parity
|
||
FlowControlHardware, // FlowControl: Defaults to no flow control
|
||
32, // ReceiveBufferSize
|
||
32, // TransmitBufferSize
|
||
"\\_SB.URT1", // ResourceSource: UART bus controller name
|
||
,
|
||
,
|
||
UAR1, // DescriptorName: creates name for offset of resource descriptor
|
||
)
|
||
|
||
// Index 10
|
||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {62} // Pin 14 of JP1 (GPIO_SC[62])
|
||
// Index 11
|
||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {62}
|
||
|
||
// Index 12
|
||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {63} // Pin 16 of JP1 (GPIO_SC[63])
|
||
// Index 13
|
||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {63}
|
||
|
||
// Index 14
|
||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {65} // Pin 18 of JP1 (GPIO_SC[65])
|
||
// Index 15
|
||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {65}
|
||
|
||
// Index 16
|
||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {64} // Pin 20 of JP1 (GPIO_SC[64])
|
||
// Index 17
|
||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {64}
|
||
|
||
// Index 18
|
||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {94} // Pin 22 of JP1 (GPIO_SC[94])
|
||
// Index 19
|
||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {94}
|
||
|
||
// Index 20
|
||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {95} // Pin 24 of JP1 (GPIO_SC[95])
|
||
// Index 21
|
||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {95}
|
||
|
||
// Index 22
|
||
GpioIo (Shared, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.GPO0",) {54} // Pin 26 of JP1 (GPIO_SC[54])
|
||
// Index 23
|
||
GpioInt(Edge, ActiveBoth, SharedAndWake, PullNone, 0,"\\_SB.GPO0",) {54}
|
||
})
|
||
|
||
Name(_DSD, Package() {
|
||
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
||
Package(1) { // Just one Property for IOT (at this time)
|
||
Package(2) { //The <20>symbolic-identifiers<72> property
|
||
"symbolic-identifiers",
|
||
Package() { //Contains all the <resource index, symbolic-identifier> pairs
|
||
0, "SPI0",
|
||
1, "I2C5",
|
||
2, "UART2",
|
||
3, 21, // Pin 21 of JP1 (GPIO_S5[00])
|
||
4, 21, // Pin 21 for separate resource.
|
||
5, 23, // Pin 23 of JP1 (GPIO_S5[01])
|
||
6, 23,
|
||
7, 25, // Pin 25 of JP1 (GPIO_S5[02])
|
||
8, 25,
|
||
9, "UART1",
|
||
10, 14, // Pin 14 of JP1 (GPIO_SC[62])
|
||
11, 14,
|
||
12, 16, // Pin 16 of JP1 (GPIO_SC[63])
|
||
13, 16,
|
||
14, 18, // Pin 18 of JP1 (GPIO_SC[65])
|
||
15, 18,
|
||
16, 20, // Pin 20 of JP1 (GPIO_SC[64])
|
||
17, 20,
|
||
18, 22, // Pin 22 of JP1 (GPIO_SC[94])
|
||
19, 22,
|
||
20, 24, // Pin 24 of JP1 (GPIO_SC[95])
|
||
21, 24,
|
||
22, 26, // Pin 26 of JP1 (GPIO_SC[54])
|
||
23, 26
|
||
}
|
||
}
|
||
}
|
||
})
|
||
|
||
Method(_STA,0,Serialized) {
|
||
|
||
//
|
||
// Only report IoT virtual device when all pins' configuration follows MSFT's datasheet.
|
||
//
|
||
If (LEqual(IOT, 1)) {
|
||
Return (0xF)
|
||
}
|
||
|
||
Return (0x0)
|
||
}
|
||
}
|