audk/Vlv2DeviceRefCodePkg/ValleyView2Soc/SouthCluster/Include/PchRegs/PchRegsLpss.h

493 lines
26 KiB
C

/*++
Copyright (c) 2012 - 2014, Intel Corporation. All rights reserved
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
PchRegsLpss.h
Abstract:
Register names for VLV Low Input Output (LPSS) module.
Conventions:
- Prefixes:
Definitions beginning with "R_" are registers
Definitions beginning with "B_" are bits within registers
Definitions beginning with "V_" are meaningful values of bits within the registers
Definitions beginning with "S_" are register sizes
Definitions beginning with "N_" are the bit position
- In general, PCH registers are denoted by "_PCH_" in register names
- Registers / bits that are different between PCH generations are denoted by
"_PCH_<generation_name>_" in register/bit names. e.g., "_PCH_VLV_"
- Registers / bits that are different between SKUs are denoted by "_<SKU_name>"
at the end of the register/bit names
- Registers / bits of new devices introduced in a PCH generation will be just named
as "_PCH_" without <generation_name> inserted.
--*/
#ifndef _PCH_REGS_LPSS_H_
#define _PCH_REGS_LPSS_H_
//
// Low Power Input Output (LPSS) Module Registers
//
//
// LPSS DMAC Modules
// PCI Config Space Registers
//
#define PCI_DEVICE_NUMBER_PCH_LPSS_DMAC0 30
#define PCI_DEVICE_NUMBER_PCH_LPSS_DMAC1 24
#define PCI_FUNCTION_NUMBER_PCH_LPSS_DMAC 0
#define R_PCH_LPSS_DMAC_DEVVENDID 0x00 // Device ID & Vendor ID
#define B_PCH_LPSS_DMAC_DEVVENDID_DID 0xFFFF0000 // Device ID
#define B_PCH_LPSS_DMAC_DEVVENDID_VID 0x0000FFFF // Vendor ID
#define R_PCH_LPSS_DMAC_STSCMD 0x04 // Status & Command
#define B_PCH_LPSS_DMAC_STSCMD_RMA BIT29 // RMA
#define B_PCH_LPSS_DMAC_STSCMD_RCA BIT28 // RCA
#define B_PCH_LPSS_DMAC_STSCMD_CAPLIST BIT20 // Capability List
#define B_PCH_LPSS_DMAC_STSCMD_INTRSTS BIT19 // Interrupt Status
#define B_PCH_LPSS_DMAC_STSCMD_INTRDIS BIT10 // Interrupt Disable
#define B_PCH_LPSS_DMAC_STSCMD_SERREN BIT8 // SERR# Enable
#define B_PCH_LPSS_DMAC_STSCMD_BME BIT2 // Bus Master Enable
#define B_PCH_LPSS_DMAC_STSCMD_MSE BIT1 // Memory Space Enable
#define R_PCH_LPSS_DMAC_REVCC 0x08 // Revision ID & Class Code
#define B_PCH_LPSS_DMAC_REVCC_CC 0xFFFFFF00 // Class Code
#define B_PCH_LPSS_DMAC_REVCC_RID 0x000000FF // Revision ID
#define R_PCH_LPSS_DMAC_CLHB 0x0C
#define B_PCH_LPSS_DMAC_CLHB_MULFNDEV BIT23
#define B_PCH_LPSS_DMAC_CLHB_HT 0x007F0000 // Header Type
#define B_PCH_LPSS_DMAC_CLHB_LT 0x0000FF00 // Latency Timer
#define B_PCH_LPSS_DMAC_CLHB_CLS 0x000000FF // Cache Line Size
#define R_PCH_LPSS_DMAC_BAR 0x10 // BAR
#define B_PCH_LPSS_DMAC_BAR_BA 0xFFFFC000 // Base Address
#define V_PCH_LPSS_DMAC_BAR_SIZE 0x4000
#define N_PCH_LPSS_DMAC_BAR_ALIGNMENT 14
#define B_PCH_LPSS_DMAC_BAR_SI 0x00000FF0 // Size Indicator
#define B_PCH_LPSS_DMAC_BAR_PF BIT3 // Prefetchable
#define B_PCH_LPSS_DMAC_BAR_TYPE (BIT2 | BIT1) // Type
#define B_PCH_LPSS_DMAC_BAR_MS BIT0 // Message Space
#define R_PCH_LPSS_DMAC_BAR1 0x14 // BAR 1
#define B_PCH_LPSS_DMAC_BAR1_BA 0xFFFFF000 // Base Address
#define B_PCH_LPSS_DMAC_BAR1_SI 0x00000FF0 // Size Indicator
#define B_PCH_LPSS_DMAC_BAR1_PF BIT3 // Prefetchable
#define B_PCH_LPSS_DMAC_BAR1_TYPE (BIT2 | BIT1) // Type
#define B_PCH_LPSS_DMAC_BAR1_MS BIT0 // Message Space
#define R_PCH_LPSS_DMAC_SSID 0x2C // Sub System ID
#define B_PCH_LPSS_DMAC_SSID_SID 0xFFFF0000 // Sub System ID
#define B_PCH_LPSS_DMAC_SSID_SVID 0x0000FFFF // Sub System Vendor ID
#define R_PCH_LPSS_DMAC_ERBAR 0x30 // Expansion ROM BAR
#define B_PCH_LPSS_DMAC_ERBAR_BA 0xFFFFFFFF // Expansion ROM Base Address
#define R_PCH_LPSS_DMAC_CAPPTR 0x34 // Capability Pointer
#define B_PCH_LPSS_DMAC_CAPPTR_CPPWR 0xFF // Capability Pointer Power
#define R_PCH_LPSS_DMAC_INTR 0x3C // Interrupt
#define B_PCH_LPSS_DMAC_INTR_ML 0xFF000000 // Max Latency
#define B_PCH_LPSS_DMAC_INTR_MG 0x00FF0000
#define B_PCH_LPSS_DMAC_INTR_IP 0x00000F00 // Interrupt Pin
#define B_PCH_LPSS_DMAC_INTR_IL 0x000000FF // Interrupt Line
#define R_PCH_LPSS_DMAC_PCAPID 0x80 // Power Capability ID
#define B_PCH_LPSS_DMAC_PCAPID_PS 0xF8000000 // PME Support
#define B_PCH_LPSS_DMAC_PCAPID_VS 0x00070000 // Version
#define B_PCH_LPSS_DMAC_PCAPID_NC 0x0000FF00 // Next Capability
#define B_PCH_LPSS_DMAC_PCAPID_PC 0x000000FF // Power Capability
#define R_PCH_LPSS_DMAC_PCS 0x84 // PME Control Status
#define B_PCH_LPSS_DMAC_PCS_PMESTS BIT15 // PME Status
#define B_PCH_LPSS_DMAC_PCS_PMEEN BIT8 // PME Enable
#define B_PCH_LPSS_DMAC_PCS_NSS BIT3 // No Soft Reset
#define B_PCH_LPSS_DMAC_PCS_PS (BIT1 | BIT0) // Power State
#define R_PCH_LPSS_DMAC_MANID 0xF8 // Manufacturer ID
#define B_PCH_LPSS_DMAC_MANID_MANID 0xFFFFFFFF // Manufacturer ID
//
// LPSS I2C Module
// PCI Config Space Registers
//
#define PCI_DEVICE_NUMBER_PCH_LPSS_I2C 24
#define PCI_FUNCTION_NUMBER_PCH_LPSS_I2C0 1
#define PCI_FUNCTION_NUMBER_PCH_LPSS_I2C1 2
#define PCI_FUNCTION_NUMBER_PCH_LPSS_I2C2 3
#define PCI_FUNCTION_NUMBER_PCH_LPSS_I2C3 4
#define PCI_FUNCTION_NUMBER_PCH_LPSS_I2C4 5
#define PCI_FUNCTION_NUMBER_PCH_LPSS_I2C5 6
#define PCI_FUNCTION_NUMBER_PCH_LPSS_I2C6 7
#define R_PCH_LPSS_I2C_DEVVENDID 0x00 // Device ID & Vendor ID
#define B_PCH_LPSS_I2C_DEVVENDID_DID 0xFFFF0000 // Device ID
#define B_PCH_LPSS_I2C_DEVVENDID_VID 0x0000FFFF // Vendor ID
#define R_PCH_LPSS_I2C_STSCMD 0x04 // Status & Command
#define B_PCH_LPSS_I2C_STSCMD_RMA BIT29 // RMA
#define B_PCH_LPSS_I2C_STSCMD_RCA BIT28 // RCA
#define B_PCH_LPSS_I2C_STSCMD_CAPLIST BIT20 // Capability List
#define B_PCH_LPSS_I2C_STSCMD_INTRSTS BIT19 // Interrupt Status
#define B_PCH_LPSS_I2C_STSCMD_INTRDIS BIT10 // Interrupt Disable
#define B_PCH_LPSS_I2C_STSCMD_SERREN BIT8 // SERR# Enable
#define B_PCH_LPSS_I2C_STSCMD_BME BIT2 // Bus Master Enable
#define B_PCH_LPSS_I2C_STSCMD_MSE BIT1 // Memory Space Enable
#define R_PCH_LPSS_I2C_REVCC 0x08 // Revision ID & Class Code
#define B_PCH_LPSS_I2C_REVCC_CC 0xFFFFFF00 // Class Code
#define B_PCH_LPSS_I2C_REVCC_RID 0x000000FF // Revision ID
#define R_PCH_LPSS_I2C_CLHB 0x0C
#define B_PCH_LPSS_I2C_CLHB_MULFNDEV BIT23
#define B_PCH_LPSS_I2C_CLHB_HT 0x007F0000 // Header Type
#define B_PCH_LPSS_I2C_CLHB_LT 0x0000FF00 // Latency Timer
#define B_PCH_LPSS_I2C_CLHB_CLS 0x000000FF // Cache Line Size
#define R_PCH_LPSS_I2C_BAR 0x10 // BAR
#define B_PCH_LPSS_I2C_BAR_BA 0xFFFFF000 // Base Address
#define V_PCH_LPSS_I2C_BAR_SIZE 0x1000
#define N_PCH_LPSS_I2C_BAR_ALIGNMENT 12
#define B_PCH_LPSS_I2C_BAR_SI 0x00000FF0 // Size Indicator
#define B_PCH_LPSS_I2C_BAR_PF BIT3 // Prefetchable
#define B_PCH_LPSS_I2C_BAR_TYPE (BIT2 | BIT1) // Type
#define B_PCH_LPSS_I2C_BAR_MS BIT0 // Message Space
#define R_PCH_LPSS_I2C_BAR1 0x14 // BAR 1
#define B_PCH_LPSS_I2C_BAR1_BA 0xFFFFF000 // Base Address
#define B_PCH_LPSS_I2C_BAR1_SI 0x00000FF0 // Size Indicator
#define B_PCH_LPSS_I2C_BAR1_PF BIT3 // Prefetchable
#define B_PCH_LPSS_I2C_BAR1_TYPE (BIT2 | BIT1) // Type
#define B_PCH_LPSS_I2C_BAR1_MS BIT0 // Message Space
#define R_PCH_LPSS_I2C_SSID 0x2C // Sub System ID
#define B_PCH_LPSS_I2C_SSID_SID 0xFFFF0000 // Sub System ID
#define B_PCH_LPSS_I2C_SSID_SVID 0x0000FFFF // Sub System Vendor ID
#define R_PCH_LPSS_I2C_ERBAR 0x30 // Expansion ROM BAR
#define B_PCH_LPSS_I2C_ERBAR_BA 0xFFFFFFFF // Expansion ROM Base Address
#define R_PCH_LPSS_I2C_CAPPTR 0x34 // Capability Pointer
#define B_PCH_LPSS_I2C_CAPPTR_CPPWR 0xFF // Capability Pointer Power
#define R_PCH_LPSS_I2C_INTR 0x3C // Interrupt
#define B_PCH_LPSS_I2C_INTR_ML 0xFF000000 // Max Latency
#define B_PCH_LPSS_I2C_INTR_MG 0x00FF0000
#define B_PCH_LPSS_I2C_INTR_IP 0x00000F00 // Interrupt Pin
#define B_PCH_LPSS_I2C_INTR_IL 0x000000FF // Interrupt Line
#define R_PCH_LPSS_I2C_PCAPID 0x80 // Power Capability ID
#define B_PCH_LPSS_I2C_PCAPID_PS 0xF8000000 // PME Support
#define B_PCH_LPSS_I2C_PCAPID_VS 0x00070000 // Version
#define B_PCH_LPSS_I2C_PCAPID_NC 0x0000FF00 // Next Capability
#define B_PCH_LPSS_I2C_PCAPID_PC 0x000000FF // Power Capability
#define R_PCH_LPSS_I2C_PCS 0x84 // PME Control Status
#define B_PCH_LPSS_I2C_PCS_PMESTS BIT15 // PME Status
#define B_PCH_LPSS_I2C_PCS_PMEEN BIT8 // PME Enable
#define B_PCH_LPSS_I2C_PCS_NSS BIT3 // No Soft Reset
#define B_PCH_LPSS_I2C_PCS_PS (BIT1 | BIT0) // Power State
#define R_PCH_LPSS_I2C_MANID 0xF8 // Manufacturer ID
#define B_PCH_LPSS_I2C_MANID_MANID 0xFFFFFFFF // Manufacturer ID
//
// LPSS I2C Module
// Memory Space Registers
//
#define R_PCH_LPSS_I2C_MEM_RESETS 0x804 // Software Reset
#define B_PCH_LPSS_I2C_MEM_RESETS_FUNC BIT1 // Function Clock Domain Reset
#define B_PCH_LPSS_I2C_MEM_RESETS_APB BIT0 // APB Domain Reset
//
// LPSS PWM Modules
// PCI Config Space Registers
//
#define PCI_DEVICE_NUMBER_PCH_LPSS_PWM 30
#define PCI_FUNCTION_NUMBER_PCH_LPSS_PWM0 1
#define PCI_FUNCTION_NUMBER_PCH_LPSS_PWM1 2
#define R_PCH_LPSS_PWM_DEVVENDID 0x00 // Device ID & Vendor ID
#define B_PCH_LPSS_PWM_DEVVENDID_DID 0xFFFF0000 // Device ID
#define B_PCH_LPSS_PWM_DEVVENDID_VID 0x0000FFFF // Vendor ID
#define R_PCH_LPSS_PWM_STSCMD 0x04 // Status & Command
#define B_PCH_LPSS_PWM_STSCMD_RMA BIT29 // RMA
#define B_PCH_LPSS_PWM_STSCMD_RCA BIT28 // RCA
#define B_PCH_LPSS_PWM_STSCMD_CAPLIST BIT20 // Capability List
#define B_PCH_LPSS_PWM_STSCMD_INTRSTS BIT19 // Interrupt Status
#define B_PCH_LPSS_PWM_STSCMD_INTRDIS BIT10 // Interrupt Disable
#define B_PCH_LPSS_PWM_STSCMD_SERREN BIT8 // SERR# Enable
#define B_PCH_LPSS_PWM_STSCMD_BME BIT2 // Bus Master Enable
#define B_PCH_LPSS_PWM_STSCMD_MSE BIT1 // Memory Space Enable
#define R_PCH_LPSS_PWM_REVCC 0x08 // Revision ID & Class Code
#define B_PCH_LPSS_PWM_REVCC_CC 0xFFFFFF00 // Class Code
#define B_PCH_LPSS_PWM_REVCC_RID 0x000000FF // Revision ID
#define R_PCH_LPSS_PWM_CLHB 0x0C
#define B_PCH_LPSS_PWM_CLHB_MULFNDEV BIT23
#define B_PCH_LPSS_PWM_CLHB_HT 0x007F0000 // Header Type
#define B_PCH_LPSS_PWM_CLHB_LT 0x0000FF00 // Latency Timer
#define B_PCH_LPSS_PWM_CLHB_CLS 0x000000FF // Cache Line Size
#define R_PCH_LPSS_PWM_BAR 0x10 // BAR
#define B_PCH_LPSS_PWM_BAR_BA 0xFFFFF000 // Base Address
#define V_PCH_LPSS_PWM_BAR_SIZE 0x1000
#define N_PCH_LPSS_PWM_BAR_ALIGNMENT 12
#define B_PCH_LPSS_PWM_BAR_SI 0x00000FF0 // Size Indicator
#define B_PCH_LPSS_PWM_BAR_PF BIT3 // Prefetchable
#define B_PCH_LPSS_PWM_BAR_TYPE (BIT2 | BIT1) // Type
#define B_PCH_LPSS_PWM_BAR_MS BIT0 // Message Space
#define R_PCH_LPSS_PWM_BAR1 0x14 // BAR 1
#define B_PCH_LPSS_PWM_BAR1_BA 0xFFFFF000 // Base Address
#define B_PCH_LPSS_PWM_BAR1_SI 0x00000FF0 // Size Indicator
#define B_PCH_LPSS_PWM_BAR1_PF BIT3 // Prefetchable
#define B_PCH_LPSS_PWM_BAR1_TYPE (BIT2 | BIT1) // Type
#define B_PCH_LPSS_PWM_BAR1_MS BIT0 // Message Space
#define R_PCH_LPSS_PWM_SSID 0x2C // Sub System ID
#define B_PCH_LPSS_PWM_SSID_SID 0xFFFF0000 // Sub System ID
#define B_PCH_LPSS_PWM_SSID_SVID 0x0000FFFF // Sub System Vendor ID
#define R_PCH_LPSS_PWM_ERBAR 0x30 // Expansion ROM BAR
#define B_PCH_LPSS_PWM_ERBAR_BA 0xFFFFFFFF // Expansion ROM Base Address
#define R_PCH_LPSS_PWM_CAPPTR 0x34 // Capability Pointer
#define B_PCH_LPSS_PWM_CAPPTR_CPPWR 0xFF // Capability Pointer Power
#define R_PCH_LPSS_PWM_INTR 0x3C // Interrupt
#define B_PCH_LPSS_PWM_INTR_ML 0xFF000000 // Max Latency
#define B_PCH_LPSS_PWM_INTR_MG 0x00FF0000
#define B_PCH_LPSS_PWM_INTR_IP 0x00000F00 // Interrupt Pin
#define B_PCH_LPSS_PWM_INTR_IL 0x000000FF // Interrupt Line
#define R_PCH_LPSS_PWM_PCAPID 0x80 // Power Capability ID
#define B_PCH_LPSS_PWM_PCAPID_PS 0xF8000000 // PME Support
#define B_PCH_LPSS_PWM_PCAPID_VS 0x00070000 // Version
#define B_PCH_LPSS_PWM_PCAPID_NC 0x0000FF00 // Next Capability
#define B_PCH_LPSS_PWM_PCAPID_PC 0x000000FF // Power Capability
#define R_PCH_LPSS_PWM_PCS 0x84 // PME Control Status
#define B_PCH_LPSS_PWM_PCS_PMESTS BIT15 // PME Status
#define B_PCH_LPSS_PWM_PCS_PMEEN BIT8 // PME Enable
#define B_PCH_LPSS_PWM_PCS_NSS BIT3 // No Soft Reset
#define B_PCH_LPSS_PWM_PCS_PS (BIT1 | BIT0) // Power State
#define R_PCH_LPSS_PWM_MANID 0xF8 // Manufacturer ID
#define B_PCH_LPSS_PWM_MANID_MANID 0xFFFFFFFF // Manufacturer ID
//
// LPSS PWM Module
// Memory Space Registers
//
#define R_PCH_LPSS_PWM_MEM_RESETS 0x804 // Software Reset
#define B_PCH_LPSS_PWM_MEM_RESETS_FUNC BIT1 // Function Clock Domain Reset
#define B_PCH_LPSS_PWM_MEM_RESETS_APB BIT0 // APB Domain Reset
//
// LPSS HSUART Modules
// PCI Config Space Registers
//
#define PCI_DEVICE_NUMBER_PCH_LPSS_HSUART 30
#define PCI_FUNCTION_NUMBER_PCH_LPSS_HSUART0 3
#define PCI_FUNCTION_NUMBER_PCH_LPSS_HSUART1 4
#define R_PCH_LPSS_HSUART_DEVVENDID 0x00 // Device ID & Vendor ID
#define B_PCH_LPSS_HSUART_DEVVENDID_DID 0xFFFF0000 // Device ID
#define B_PCH_LPSS_HSUART_DEVVENDID_VID 0x0000FFFF // Vendor ID
#define R_PCH_LPSS_HSUART_STSCMD 0x04 // Status & Command
#define B_PCH_LPSS_HSUART_STSCMD_RMA BIT29 // RMA
#define B_PCH_LPSS_HSUART_STSCMD_RCA BIT28 // RCA
#define B_PCH_LPSS_HSUART_STSCMD_CAPLIST BIT20 // Capability List
#define B_PCH_LPSS_HSUART_STSCMD_INTRSTS BIT19 // Interrupt Status
#define B_PCH_LPSS_HSUART_STSCMD_INTRDIS BIT10 // Interrupt Disable
#define B_PCH_LPSS_HSUART_STSCMD_SERREN BIT8 // SERR# Enable
#define B_PCH_LPSS_HSUART_STSCMD_BME BIT2 // Bus Master Enable
#define B_PCH_LPSS_HSUART_STSCMD_MSE BIT1 // Memory Space Enable
#define R_PCH_LPSS_HSUART_REVCC 0x08 // Revision ID & Class Code
#define B_PCH_LPSS_HSUART_REVCC_CC 0xFFFFFF00 // Class Code
#define B_PCH_LPSS_HSUART_REVCC_RID 0x000000FF // Revision ID
#define R_PCH_LPSS_HSUART_CLHB 0x0C
#define B_PCH_LPSS_HSUART_CLHB_MULFNDEV BIT23
#define B_PCH_LPSS_HSUART_CLHB_HT 0x007F0000 // Header Type
#define B_PCH_LPSS_HSUART_CLHB_LT 0x0000FF00 // Latency Timer
#define B_PCH_LPSS_HSUART_CLHB_CLS 0x000000FF // Cache Line Size
#define R_PCH_LPSS_HSUART_BAR 0x10 // BAR
#define B_PCH_LPSS_HSUART_BAR_BA 0xFFFFF000 // Base Address
#define V_PCH_LPSS_HSUART_BAR_SIZE 0x1000
#define N_PCH_LPSS_HSUART_BAR_ALIGNMENT 12
#define B_PCH_LPSS_HSUART_BAR_SI 0x00000FF0 // Size Indicator
#define B_PCH_LPSS_HSUART_BAR_PF BIT3 // Prefetchable
#define B_PCH_LPSS_HSUART_BAR_TYPE (BIT2 | BIT1) // Type
#define B_PCH_LPSS_HSUART_BAR_MS BIT0 // Message Space
#define R_PCH_LPSS_HSUART_BAR1 0x14 // BAR 1
#define B_PCH_LPSS_HSUART_BAR1_BA 0xFFFFF000 // Base Address
#define B_PCH_LPSS_HSUART_BAR1_SI 0x00000FF0 // Size Indicator
#define B_PCH_LPSS_HSUART_BAR1_PF BIT3 // Prefetchable
#define B_PCH_LPSS_HSUART_BAR1_TYPE (BIT2 | BIT1) // Type
#define B_PCH_LPSS_HSUART_BAR1_MS BIT0 // Message Space
#define R_PCH_LPSS_HSUART_SSID 0x2C // Sub System ID
#define B_PCH_LPSS_HSUART_SSID_SID 0xFFFF0000 // Sub System ID
#define B_PCH_LPSS_HSUART_SSID_SVID 0x0000FFFF // Sub System Vendor ID
#define R_PCH_LPSS_HSUART_ERBAR 0x30 // Expansion ROM BAR
#define B_PCH_LPSS_HSUART_ERBAR_BA 0xFFFFFFFF // Expansion ROM Base Address
#define R_PCH_LPSS_HSUART_CAPPTR 0x34 // Capability Pointer
#define B_PCH_LPSS_HSUART_CAPPTR_CPPWR 0xFF // Capability Pointer Power
#define R_PCH_LPSS_HSUART_INTR 0x3C // Interrupt
#define B_PCH_LPSS_HSUART_INTR_ML 0xFF000000 // Max Latency
#define B_PCH_LPSS_HSUART_INTR_MG 0x00FF0000
#define B_PCH_LPSS_HSUART_INTR_IP 0x00000F00 // Interrupt Pin
#define B_PCH_LPSS_HSUART_INTR_IL 0x000000FF // Interrupt Line
#define R_PCH_LPSS_HSUART_PCAPID 0x80 // Power Capability ID
#define B_PCH_LPSS_HSUART_PCAPID_PS 0xF8000000 // PME Support
#define B_PCH_LPSS_HSUART_PCAPID_VS 0x00070000 // Version
#define B_PCH_LPSS_HSUART_PCAPID_NC 0x0000FF00 // Next Capability
#define B_PCH_LPSS_HSUART_PCAPID_PC 0x000000FF // Power Capability
#define R_PCH_LPSS_HSUART_PCS 0x84 // PME Control Status
#define B_PCH_LPSS_HSUART_PCS_PMESTS BIT15 // PME Status
#define B_PCH_LPSS_HSUART_PCS_PMEEN BIT8 // PME Enable
#define B_PCH_LPSS_HSUART_PCS_NSS BIT3 // No Soft Reset
#define B_PCH_LPSS_HSUART_PCS_PS (BIT1 | BIT0) // Power State
#define R_PCH_LPSS_HSUART_MANID 0xF8 // Manufacturer ID
#define B_PCH_LPSS_HSUART_MANID_MANID 0xFFFFFFFF // Manufacturer ID
//
// LPSS HSUART Module
// Memory Space Registers
//
#define R_PCH_LPSS_HSUART_MEM_PCP 0x800 // Private Clock Parameters
#define B_PCH_LPSS_HSUART_MEM_PCP_CLKUPDATE BIT31 // Clock Divider Update
#define B_PCH_LPSS_HSUART_MEM_PCP_NVAL 0x7FFF0000 // N value for the M over N divider
#define B_PCH_LPSS_HSUART_MEM_PCP_MVAL 0x0000FFFE // M value for the M over N divider
#define B_PCH_LPSS_HSUART_MEM_PCP_CLKEN BIT0 // Clock Enable
#define R_PCH_LPSS_HSUART_MEM_RESETS 0x804 // Software Reset
#define B_PCH_LPSS_HSUART_MEM_RESETS_FUNC BIT1 // Function Clock Domain Reset
#define B_PCH_LPSS_HSUART_MEM_RESETS_APB BIT0 // APB Domain Reset
//
// LPSS SPI Module
// PCI Config Space Registers
//
#define PCI_DEVICE_NUMBER_PCH_LPSS_SPI 30
#define PCI_FUNCTION_NUMBER_PCH_LPSS_SPI 5
#define R_PCH_LPSS_SPI_DEVVENDID 0x00 // Device ID & Vendor ID
#define B_PCH_LPSS_SPI_DEVVENDID_DID 0xFFFF0000 // Device ID
#define B_PCH_LPSS_SPI_DEVVENDID_VID 0x0000FFFF // Vendor ID
#define R_PCH_LPSS_SPI_STSCMD 0x04 // Status & Command
#define B_PCH_LPSS_SPI_STSCMD_RMA BIT29 // RMA
#define B_PCH_LPSS_SPI_STSCMD_RCA BIT28 // RCA
#define B_PCH_LPSS_SPI_STSCMD_CAPLIST BIT20 // Capability List
#define B_PCH_LPSS_SPI_STSCMD_INTRSTS BIT19 // Interrupt Status
#define B_PCH_LPSS_SPI_STSCMD_INTRDIS BIT10 // Interrupt Disable
#define B_PCH_LPSS_SPI_STSCMD_SERREN BIT8 // SERR# Enable
#define B_PCH_LPSS_SPI_STSCMD_BME BIT2 // Bus Master Enable
#define B_PCH_LPSS_SPI_STSCMD_MSE BIT1 // Memory Space Enable
#define R_PCH_LPSS_SPI_REVCC 0x08 // Revision ID & Class Code
#define B_PCH_LPSS_SPI_REVCC_CC 0xFFFFFF00 // Class Code
#define B_PCH_LPSS_SPI_REVCC_RID 0x000000FF // Revision ID
#define R_PCH_LPSS_SPI_CLHB 0x0C
#define B_PCH_LPSS_SPI_CLHB_MULFNDEV BIT23
#define B_PCH_LPSS_SPI_CLHB_HT 0x007F0000 // Header Type
#define B_PCH_LPSS_SPI_CLHB_LT 0x0000FF00 // Latency Timer
#define B_PCH_LPSS_SPI_CLHB_CLS 0x000000FF // Cache Line Size
#define R_PCH_LPSS_SPI_BAR 0x10 // BAR
#define B_PCH_LPSS_SPI_BAR_BA 0xFFFFF000 // Base Address
#define V_PCH_LPSS_SPI_BAR_SIZE 0x1000
#define N_PCH_LPSS_SPI_BAR_ALIGNMENT 12
#define B_PCH_LPSS_SPI_BAR_SI 0x00000FF0 // Size Indicator
#define B_PCH_LPSS_SPI_BAR_PF BIT3 // Prefetchable
#define B_PCH_LPSS_SPI_BAR_TYPE (BIT2 | BIT1) // Type
#define B_PCH_LPSS_SPI_BAR_MS BIT0 // Message Space
#define R_PCH_LPSS_SPI_BAR1 0x14 // BAR 1
#define B_PCH_LPSS_SPI_BAR1_BA 0xFFFFF000 // Base Address
#define B_PCH_LPSS_SPI_BAR1_SI 0x00000FF0 // Size Indicator
#define B_PCH_LPSS_SPI_BAR1_PF BIT3 // Prefetchable
#define B_PCH_LPSS_SPI_BAR1_TYPE (BIT2 | BIT1) // Type
#define B_PCH_LPSS_SPI_BAR1_MS BIT0 // Message Space
#define R_PCH_LPSS_SPI_SSID 0x2C // Sub System ID
#define B_PCH_LPSS_SPI_SSID_SID 0xFFFF0000 // Sub System ID
#define B_PCH_LPSS_SPI_SSID_SVID 0x0000FFFF // Sub System Vendor ID
#define R_PCH_LPSS_SPI_ERBAR 0x30 // Expansion ROM BAR
#define B_PCH_LPSS_SPI_ERBAR_BA 0xFFFFFFFF // Expansion ROM Base Address
#define R_PCH_LPSS_SPI_CAPPTR 0x34 // Capability Pointer
#define B_PCH_LPSS_SPI_CAPPTR_CPPWR 0xFF // Capability Pointer Power
#define R_PCH_LPSS_SPI_INTR 0x3C // Interrupt
#define B_PCH_LPSS_SPI_INTR_ML 0xFF000000 // Max Latency
#define B_PCH_LPSS_SPI_INTR_MG 0x00FF0000
#define B_PCH_LPSS_SPI_INTR_IP 0x00000F00 // Interrupt Pin
#define B_PCH_LPSS_SPI_INTR_IL 0x000000FF // Interrupt Line
#define R_PCH_LPSS_SPI_PCAPID 0x80 // Power Capability ID
#define B_PCH_LPSS_SPI_PCAPID_PS 0xF8000000 // PME Support
#define B_PCH_LPSS_SPI_PCAPID_VS 0x00070000 // Version
#define B_PCH_LPSS_SPI_PCAPID_NC 0x0000FF00 // Next Capability
#define B_PCH_LPSS_SPI_PCAPID_PC 0x000000FF // Power Capability
#define R_PCH_LPSS_SPI_PCS 0x84 // PME Control Status
#define B_PCH_LPSS_SPI_PCS_PMESTS BIT15 // PME Status
#define B_PCH_LPSS_SPI_PCS_PMEEN BIT8 // PME Enable
#define B_PCH_LPSS_SPI_PCS_NSS BIT3 // No Soft Reset
#define B_PCH_LPSS_SPI_PCS_PS (BIT1 | BIT0) // Power State
#define R_PCH_LPSS_SPI_MANID 0xF8 // Manufacturer ID
#define B_PCH_LPSS_SPI_MANID_MANID 0xFFFFFFFF // Manufacturer ID
//
// LPSS SPI Module
// Memory Space Registers
//
#define R_PCH_LPSS_SPI_MEM_PCP 0x400 // Private Clock Parameters
#define B_PCH_LPSS_SPI_MEM_PCP_CLKUPDATE BIT31 // Clock Divider Update
#define B_PCH_LPSS_SPI_MEM_PCP_NVAL 0x7FFF0000 // N value for the M over N divider
#define B_PCH_LPSS_SPI_MEM_PCP_MVAL 0x0000FFFE // M value for the M over N divider
#define B_PCH_LPSS_SPI_MEM_PCP_CLKEN BIT0 // Clock Enable
#define R_PCH_LPSS_SPI_MEM_RESETS 0x404 // Software Reset
#define B_PCH_LPSS_SPI_MEM_RESETS_FUNC BIT1 // Function Clock Domain Reset
#define B_PCH_LPSS_SPI_MEM_RESETS_APB BIT0 // APB Domain Reset
#endif