audk/EdkCompatibilityPkg/Foundation/Efi/Protocol/ScsiPassThru/ScsiPassThru.h

333 lines
15 KiB
C

/*++
Copyright (c) 2004, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
ScsiPassThru.h
Abstract:
SCSI Pass Through protocol.
--*/
#ifndef __SCSI_PT_H__
#define __SCSI_PT_H__
#define EFI_SCSI_PASS_THRU_PROTOCOL_GUID \
{ \
0xa59e8fcf, 0xbda0, 0x43bb, 0x90, 0xb1, 0xd3, 0x73, 0x2e, 0xca, 0xa8, 0x77 \
}
//
// Forward reference for pure ANSI compatability
//
EFI_FORWARD_DECLARATION (EFI_SCSI_PASS_THRU_PROTOCOL);
#define EFI_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL 0x0001
#define EFI_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL 0x0002
#define EFI_SCSI_PASS_THRU_ATTRIBUTES_NONBLOCKIO 0x0004
//
// SCSI Host Adapter Status definition
//
#define EFI_SCSI_STATUS_HOST_ADAPTER_OK 0x00
#define EFI_SCSI_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND 0x09 // timeout when processing the command
#define EFI_SCSI_STATUS_HOST_ADAPTER_TIMEOUT 0x0b // timeout when waiting for the command processing
#define EFI_SCSI_STATUS_HOST_ADAPTER_MESSAGE_REJECT 0x0d // a message reject was received when processing command
#define EFI_SCSI_STATUS_HOST_ADAPTER_BUS_RESET 0x0e // a bus reset was detected
#define EFI_SCSI_STATUS_HOST_ADAPTER_PARITY_ERROR 0x0f
#define EFI_SCSI_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED 0x10 // the adapter failed in issuing request sense command
#define EFI_SCSI_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT 0x11 // selection timeout
#define EFI_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN 0x12 // data overrun or data underrun
#define EFI_SCSI_STATUS_HOST_ADAPTER_BUS_FREE 0x13 // Unexepected bus free
#define EFI_SCSI_STATUS_HOST_ADAPTER_PHASE_ERROR 0x14 // Target bus phase sequence failure
#define EFI_SCSI_STATUS_HOST_ADAPTER_OTHER 0x7f
//
// SCSI Target Status definition
//
#define EFI_SCSI_STATUS_TARGET_GOOD 0x00
#define EFI_SCSI_STATUS_TARGET_CHECK_CONDITION 0x02 // check condition
#define EFI_SCSI_STATUS_TARGET_CONDITION_MET 0x04 // condition met
#define EFI_SCSI_STATUS_TARGET_BUSY 0x08 // busy
#define EFI_SCSI_STATUS_TARGET_INTERMEDIATE 0x10 // intermediate
#define EFI_SCSI_STATUS_TARGET_INTERMEDIATE_CONDITION_MET 0x14 // intermediate-condition met
#define EFI_SCSI_STATUS_TARGET_RESERVATION_CONFLICT 0x18 // reservation conflict
#define EFI_SCSI_STATUS_TARGET_COMMOND_TERMINATED 0x22 // command terminated
#define EFI_SCSI_STATUS_TARGET_QUEUE_FULL 0x28 // queue full
typedef struct {
UINT64 Timeout;
VOID *DataBuffer;
VOID *SenseData;
VOID *Cdb;
UINT32 TransferLength;
UINT8 CdbLength;
UINT8 DataDirection;
UINT8 HostAdapterStatus;
UINT8 TargetStatus;
UINT8 SenseDataLength;
} EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET;
typedef struct {
CHAR16 *ControllerName;
CHAR16 *ChannelName;
UINT32 AdapterId;
UINT32 Attributes;
UINT32 IoAlign;
} EFI_SCSI_PASS_THRU_MODE;
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_PASS_THRU_PASSTHRU) (
IN EFI_SCSI_PASS_THRU_PROTOCOL * This,
IN UINT32 Target,
IN UINT64 Lun,
IN OUT EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET * Packet,
IN EFI_EVENT Event OPTIONAL
)
/*++
Routine Description:
Sends a SCSI Request Packet to a SCSI device that is attached to
the SCSI channel. This function supports both blocking I/O and
non-blocking I/O. The blocking I/O functionality is required,
and the non-blocking I/O functionality is optional.
Arguments:
This - Protocol instance pointer.
Target - The Target ID of the SCSI device to
send the SCSI Request Packet.
Lun - The LUN of the SCSI device to send the
SCSI Request Packet.
Packet - A pointer to the SCSI Request Packet to send
to the SCSI device specified by Target and Lun.
Event - If non-blocking I/O is not supported then Event
is ignored, and blocking I/O is performed.
If Event is NULL, then blocking I/O is performed.
If Event is not NULL and non blocking I/O is
supported, then non-blocking I/O is performed,
and Event will be signaled when the SCSI Request
Packet completes
Returns:
EFI_SUCCESSThe - SCSI Request Packet was sent by the host, and
TransferLength bytes were transferred to/from
DataBuffer.See HostAdapterStatus, TargetStatus,
SenseDataLength,and SenseData in that order
for additional status information.
EFI_BAD_BUFFER_SIZE - The SCSI Request Packet was executed, but the
entire DataBuffer could not be transferred.
The actual number of bytes transferred is returned
in TransferLength. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
EFI_NOT_READY - The SCSI Request Packet could not be sent because
there are too many SCSI Request Packets already
queued. The caller may retry again later.
EFI_DEVICE_ERROR - A device error occurred while attempting to send
the SCSI Request Packet. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
EFI_INVALID_PARAMETER - Target, Lun, or the contents of ScsiRequestPacket
are invalid. The SCSI Request Packet was not sent,
so no additional status information is available.
EFI_UNSUPPORTED - The command described by the SCSI Request Packet
is not supported by the host adapter. The SCSI
Request Packet was not sent, so no additional
status information is available.
EFI_TIMEOUT - A timeout occurred while waiting for the SCSI
Request Packet to execute. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
--*/
;
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_PASS_THRU_GET_NEXT_DEVICE) (
IN EFI_SCSI_PASS_THRU_PROTOCOL * This,
IN OUT UINT32 *Target,
IN OUT UINT64 *Lun
)
/*++
Routine Description:
Used to retrieve the list of legal Target IDs for SCSI devices
on a SCSI channel.
Arguments:
This - Protocol instance pointer.
Target - On input, a pointer to the Target ID of a
SCSI device present on the SCSI channel.
On output, a pointer to the Target ID of
the next SCSI device present on a SCSI channel.
An input value of 0xFFFFFFFF retrieves the
Target ID of the first SCSI device present on
a SCSI channel.
Lun - On input, a pointer to the LUN of a SCSI device
present on the SCSI channel.On output, a pointer
to the LUN of the next SCSI device present on a
SCSI channel.
Returns:
EFI_SUCCESS - The Target ID of the next SCSI device on the SCSI
channel was returned in Target and Lun.
EFI_NOT_FOUND - There are no more SCSI devices on this SCSI channel.
EFI_INVALID_PARAMETER - Target is not 0xFFFFFFFF, and Target and Lun were
not returned on a previous call to GetNextDevice().
--*/
;
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_PASS_THRU_BUILD_DEVICE_PATH) (
IN EFI_SCSI_PASS_THRU_PROTOCOL * This,
IN UINT32 Target,
IN UINT64 Lun,
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
)
/*++
Routine Description:
Used to allocate and build a device path node for a SCSI device
on a SCSI channel.
Arguments:
This - Protocol instance pointer.
Target - The Target ID of the SCSI device for which
a device path node is to be allocated and built.
Lun - The LUN of the SCSI device for which a device
path node is to be allocated and built.
DevicePath - A pointer to a single device path node that
describes the SCSI device specified by
Target and Lun. This function is responsible
for allocating the buffer DevicePath with the boot
service AllocatePool(). It is the caller's
responsibility to free DevicePath when the caller
is finished with DevicePath.
Returns:
EFI_SUCCESS - The device path node that describes the SCSI device
specified by Target and Lun was allocated and
returned in DevicePath.
EFI_NOT_FOUND - The SCSI devices specified by Target and Lun does
not exist on the SCSI channel.
EFI_INVALID_PARAMETER - DevicePath is NULL.
EFI_OUT_OF_RESOURCES - There are not enough resources to allocate
DevicePath.
--*/
;
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_PASS_THRU_GET_TARGET_LUN) (
IN EFI_SCSI_PASS_THRU_PROTOCOL * This,
IN EFI_DEVICE_PATH_PROTOCOL * DevicePath,
OUT UINT32 *Target,
OUT UINT64 *Lun
)
/*++
Routine Description:
Used to translate a device path node to a Target ID and LUN.
Arguments:
This - Protocol instance pointer.
DevicePath - A pointer to the device path node that
describes a SCSI device on the SCSI channel.
Target - A pointer to the Target ID of a SCSI device
on the SCSI channel.
Lun - A pointer to the LUN of a SCSI device on
the SCSI channel.
Returns:
EFI_SUCCESS - DevicePath was successfully translated to a
Target ID and LUN, and they were returned
in Target and Lun.
EFI_INVALID_PARAMETER - DevicePath is NULL.
EFI_INVALID_PARAMETER - Target is NULL.
EFI_INVALID_PARAMETER - Lun is NULL.
EFI_UNSUPPORTED - This driver does not support the device path
node type in DevicePath.
EFI_NOT_FOUND - A valid translation from DevicePath to a
Target ID and LUN does not exist.
--*/
;
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_PASS_THRU_RESET_CHANNEL) (
IN EFI_SCSI_PASS_THRU_PROTOCOL * This
)
/*++
Routine Description:
Resets a SCSI channel.This operation resets all the
SCSI devices connected to the SCSI channel.
Arguments:
This - Protocol instance pointer.
Returns:
EFI_SUCCESS - The SCSI channel was reset.
EFI_UNSUPPORTED - The SCSI channel does not support
a channel reset operation.
EFI_DEVICE_ERROR - A device error occurred while
attempting to reset the SCSI channel.
EFI_TIMEOUT - A timeout occurred while attempting
to reset the SCSI channel.
--*/
;
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_PASS_THRU_RESET_TARGET) (
IN EFI_SCSI_PASS_THRU_PROTOCOL * This,
IN UINT32 Target,
IN UINT64 Lun
)
/*++
Routine Description:
Resets a SCSI device that is connected to a SCSI channel.
Arguments:
This - Protocol instance pointer.
Target - The Target ID of the SCSI device to reset.
Lun - The LUN of the SCSI device to reset.
Returns:
EFI_SUCCESS - The SCSI device specified by Target and
Lun was reset.
EFI_UNSUPPORTED - The SCSI channel does not support a target
reset operation.
EFI_INVALID_PARAMETER - Target or Lun are invalid.
EFI_DEVICE_ERROR - A device error occurred while attempting
to reset the SCSI device specified by Target
and Lun.
EFI_TIMEOUT - A timeout occurred while attempting to reset
the SCSI device specified by Target and Lun.
--*/
;
typedef struct _EFI_SCSI_PASS_THRU_PROTOCOL {
EFI_SCSI_PASS_THRU_MODE *Mode;
EFI_SCSI_PASS_THRU_PASSTHRU PassThru;
EFI_SCSI_PASS_THRU_GET_NEXT_DEVICE GetNextDevice;
EFI_SCSI_PASS_THRU_BUILD_DEVICE_PATH BuildDevicePath;
EFI_SCSI_PASS_THRU_GET_TARGET_LUN GetTargetLun;
EFI_SCSI_PASS_THRU_RESET_CHANNEL ResetChannel;
EFI_SCSI_PASS_THRU_RESET_TARGET ResetTarget;
} EFI_SCSI_PASS_THRU_PROTOCOL;
extern EFI_GUID gEfiScsiPassThruProtocolGuid;
#endif