audk/MdeModulePkg/Bus/Pci/UhciDxe/Uhci.h

210 lines
6.6 KiB
C

/** @file
The definition for UHCI driver model and HC protocol routines.
Copyright (c) 2004 - 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _EFI_UHCI_H_
#define _EFI_UHCI_H_
#include <Uefi.h>
#include <Protocol/Usb2HostController.h>
#include <Protocol/UsbHostController.h>
#include <Protocol/PciIo.h>
#include <Library/DebugLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/UefiDriverEntryPoint.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Library/BaseLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/PcdLib.h>
#include <IndustryStandard/Pci22.h>
typedef struct _USB_HC_DEV USB_HC_DEV;
#include "UsbHcMem.h"
#include "UhciQueue.h"
#include "UhciReg.h"
#include "UhciSched.h"
#include "UhciDebug.h"
#include "ComponentName.h"
typedef enum {
UHC_1_MICROSECOND = 1,
UHC_1_MILLISECOND = 1000 * UHC_1_MICROSECOND,
UHC_1_SECOND = 1000 * UHC_1_MILLISECOND,
//
// UHCI register operation timeout, set by experience
//
UHC_GENERIC_TIMEOUT = UHC_1_SECOND,
//
// Wait for force global resume(FGR) complete, refers to
// specification[UHCI11-2.1.1]
//
UHC_FORCE_GLOBAL_RESUME_STALL = 20 * UHC_1_MILLISECOND,
//
// Wait for roothub port reset and recovery, reset stall
// is set by experience, and recovery stall refers to
// specification[UHCI11-2.1.1]
//
UHC_ROOT_PORT_RESET_STALL = 50 * UHC_1_MILLISECOND,
UHC_ROOT_PORT_RECOVERY_STALL = 10 * UHC_1_MILLISECOND,
//
// Sync and Async transfer polling interval, set by experience,
// and the unit of Async is 100us.
//
UHC_SYNC_POLL_INTERVAL = 50 * UHC_1_MICROSECOND,
UHC_ASYNC_POLL_INTERVAL = 50 * 10000UL
}UHC_TIMEOUT_EXPERIENCE_VALUE;
//
// UHC raises TPL to TPL_NOTIFY to serialize all its operations
// to protect shared data structures.
//
#define UHCI_TPL TPL_NOTIFY
#define USB_HC_DEV_SIGNATURE EFI_SIGNATURE_32 ('u', 'h', 'c', 'i')
#pragma pack(1)
typedef struct {
UINT8 PI;
UINT8 SubClassCode;
UINT8 BaseCode;
} USB_CLASSC;
#pragma pack()
#define UHC_FROM_USB2_HC_PROTO(This) CR(This, USB_HC_DEV, Usb2Hc, USB_HC_DEV_SIGNATURE)
//
// USB_HC_DEV support the UHCI hardware controller. It schedules
// the asynchronous interrupt transfer with the same method as
// EHCI: a reversed tree structure. For synchronous interrupt,
// control and bulk transfer, it uses three static queue head to
// schedule them. SyncIntQh is for interrupt transfer. LsCtrlQh is
// for LOW speed control transfer, and FsCtrlBulkQh is for FULL
// speed control or bulk transfer. This is because FULL speed contrl
// or bulk transfer can reclaim the unused bandwidth. Some USB
// device requires this bandwidth reclamation capability.
//
struct _USB_HC_DEV {
UINT32 Signature;
EFI_USB2_HC_PROTOCOL Usb2Hc;
EFI_PCI_IO_PROTOCOL *PciIo;
UINT64 OriginalPciAttributes;
//
// Schedule data structures
//
UINT32 *FrameBase;
UHCI_QH_SW *SyncIntQh;
UHCI_QH_SW *CtrlQh;
UHCI_QH_SW *BulkQh;
//
// Structures to maintain asynchronus interrupt transfers.
// When asynchronous interrutp transfer is unlinked from
// the frame list, the hardware may still hold a pointer
// to it. To synchronize with hardware, its resoureces are
// released in two steps using Recycle and RecycleWait.
// Check the asynchronous interrupt management routines.
//
LIST_ENTRY AsyncIntList;
EFI_EVENT AsyncIntMonitor;
UHCI_ASYNC_REQUEST *Recycle;
UHCI_ASYNC_REQUEST *RecycleWait;
UINTN RootPorts;
USBHC_MEM_POOL *MemPool;
EFI_UNICODE_STRING_TABLE *CtrlNameTable;
VOID *FrameMapping;
};
extern EFI_DRIVER_BINDING_PROTOCOL gUhciDriverBinding;
extern EFI_COMPONENT_NAME_PROTOCOL gUhciComponentName;
extern EFI_COMPONENT_NAME2_PROTOCOL gUhciComponentName2;
/**
Test to see if this driver supports ControllerHandle. Any
ControllerHandle that has UsbHcProtocol installed will be supported.
@param This Protocol instance pointer.
@param Controller Handle of device to test.
@param RemainingDevicePath Not used.
@return EFI_SUCCESS This driver supports this device.
@return EFI_UNSUPPORTED This driver does not support this device.
**/
EFI_STATUS
EFIAPI
UhciDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Starting the Usb UHCI Driver.
@param This Protocol instance pointer.
@param Controller Handle of device to test.
@param RemainingDevicePath Not used.
@retval EFI_SUCCESS This driver supports this device.
@retval EFI_UNSUPPORTED This driver does not support this device.
@retval EFI_DEVICE_ERROR This driver cannot be started due to device Error.
EFI_OUT_OF_RESOURCES- Failed due to resource shortage.
**/
EFI_STATUS
EFIAPI
UhciDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Stop this driver on ControllerHandle. Support stoping any child handles
created by this driver.
@param This Protocol instance pointer.
@param Controller Handle of device to stop driver on.
@param NumberOfChildren Number of Children in the ChildHandleBuffer.
@param ChildHandleBuffer List of handles for the children we need to stop.
@return EFI_SUCCESS
@return others
**/
EFI_STATUS
EFIAPI
UhciDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
);
#endif