audk/EdkCompatibilityPkg/Foundation/Library/Dxe/Graphics/Graphics.c

628 lines
18 KiB
C

/*++
Copyright (c) 2004 - 2009, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
Graphics.c
Abstract:
Support for Basic Graphics operations.
BugBug: Currently *.BMP files are supported. This will be replaced
when Tiano graphics format is supported.
--*/
#include "Tiano.h"
#include "EfiDriverLib.h"
#include "GraphicsLib.h"
EFI_STATUS
GetGraphicsBitMapFromFV (
IN EFI_GUID *FileNameGuid,
OUT VOID **Image,
OUT UINTN *ImageSize
)
/*++
Routine Description:
Return the graphics image file named FileNameGuid into Image and return it's
size in ImageSize. All Firmware Volumes (FV) in the system are searched for the
file name.
Arguments:
FileNameGuid - File Name of graphics file in the FV(s).
Image - Pointer to pointer to return graphics image. If NULL, a
buffer will be allocated.
ImageSize - Size of the graphics Image in bytes. Zero if no image found.
Returns:
EFI_SUCCESS - Image and ImageSize are valid.
EFI_BUFFER_TOO_SMALL - Image not big enough. ImageSize has required size
EFI_NOT_FOUND - FileNameGuid not found
--*/
{
return GetGraphicsBitMapFromFVEx (NULL, FileNameGuid, Image, ImageSize);
}
EFI_STATUS
GetGraphicsBitMapFromFVEx (
IN EFI_HANDLE ImageHandle,
IN EFI_GUID *FileNameGuid,
OUT VOID **Image,
OUT UINTN *ImageSize
)
/*++
Routine Description:
Return the graphics image file named FileNameGuid into Image and return it's
size in ImageSize. All Firmware Volumes (FV) in the system are searched for the
file name.
Arguments:
ImageHandle - The driver image handle of the caller. The parameter is used to
optimize the loading of the image file so that the FV from which
the driver image is loaded will be tried first.
FileNameGuid - File Name of graphics file in the FV(s).
Image - Pointer to pointer to return graphics image. If NULL, a
buffer will be allocated.
ImageSize - Size of the graphics Image in bytes. Zero if no image found.
Returns:
EFI_SUCCESS - Image and ImageSize are valid.
EFI_BUFFER_TOO_SMALL - Image not big enough. ImageSize has required size
EFI_NOT_FOUND - FileNameGuid not found
--*/
{
return GetImageEx (
ImageHandle,
FileNameGuid,
EFI_SECTION_RAW,
Image,
ImageSize,
FALSE
);
}
EFI_STATUS
ConvertBmpToGopBlt (
IN VOID *BmpImage,
IN UINTN BmpImageSize,
IN OUT VOID **GopBlt,
IN OUT UINTN *GopBltSize,
OUT UINTN *PixelHeight,
OUT UINTN *PixelWidth
)
/*++
Routine Description:
Convert a *.BMP graphics image to a GOP/UGA blt buffer. If a NULL Blt buffer
is passed in a GopBlt buffer will be allocated by this routine. If a GopBlt
buffer is passed in it will be used if it is big enough.
Arguments:
BmpImage - Pointer to BMP file
BmpImageSize - Number of bytes in BmpImage
GopBlt - Buffer containing GOP version of BmpImage.
GopBltSize - Size of GopBlt in bytes.
PixelHeight - Height of GopBlt/BmpImage in pixels
PixelWidth - Width of GopBlt/BmpImage in pixels
Returns:
EFI_SUCCESS - GopBlt and GopBltSize are returned.
EFI_UNSUPPORTED - BmpImage is not a valid *.BMP image
EFI_BUFFER_TOO_SMALL - The passed in GopBlt buffer is not big enough.
GopBltSize will contain the required size.
EFI_OUT_OF_RESOURCES - No enough buffer to allocate
--*/
{
UINT8 *Image;
UINT8 *ImageHeader;
BMP_IMAGE_HEADER *BmpHeader;
BMP_COLOR_MAP *BmpColorMap;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Blt;
UINT64 BltBufferSize;
UINTN Index;
UINTN Height;
UINTN Width;
UINTN ImageIndex;
BOOLEAN IsAllocated;
BmpHeader = (BMP_IMAGE_HEADER *) BmpImage;
if (BmpHeader->CharB != 'B' || BmpHeader->CharM != 'M') {
return EFI_UNSUPPORTED;
}
if (BmpHeader->CompressionType != 0) {
return EFI_UNSUPPORTED;
}
//
// Calculate Color Map offset in the image.
//
Image = BmpImage;
BmpColorMap = (BMP_COLOR_MAP *) (Image + sizeof (BMP_IMAGE_HEADER));
//
// Calculate graphics image data address in the image
//
Image = ((UINT8 *) BmpImage) + BmpHeader->ImageOffset;
ImageHeader = Image;
BltBufferSize = MultU64x32 ((UINT64) BmpHeader->PixelWidth, BmpHeader->PixelHeight);
//
// Ensure the BltBufferSize * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL) doesn't overflow
//
if (BltBufferSize > DivU64x32 ((UINTN) ~0, sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL), NULL)) {
return EFI_UNSUPPORTED;
}
BltBufferSize = MultU64x32 (BltBufferSize, sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL));
IsAllocated = FALSE;
if (*GopBlt == NULL) {
*GopBltSize = (UINTN) BltBufferSize;
*GopBlt = EfiLibAllocatePool (*GopBltSize);
IsAllocated = TRUE;
if (*GopBlt == NULL) {
return EFI_OUT_OF_RESOURCES;
}
} else {
if (*GopBltSize < (UINTN) BltBufferSize) {
*GopBltSize = (UINTN) BltBufferSize;
return EFI_BUFFER_TOO_SMALL;
}
}
*PixelWidth = BmpHeader->PixelWidth;
*PixelHeight = BmpHeader->PixelHeight;
//
// Convert image from BMP to Blt buffer format
//
BltBuffer = *GopBlt;
for (Height = 0; Height < BmpHeader->PixelHeight; Height++) {
Blt = &BltBuffer[(BmpHeader->PixelHeight - Height - 1) * BmpHeader->PixelWidth];
for (Width = 0; Width < BmpHeader->PixelWidth; Width++, Image++, Blt++) {
switch (BmpHeader->BitPerPixel) {
case 1:
//
// Convert 1bit BMP to 24-bit color
//
for (Index = 0; Index < 8 && Width < BmpHeader->PixelWidth; Index++) {
Blt->Red = BmpColorMap[((*Image) >> (7 - Index)) & 0x1].Red;
Blt->Green = BmpColorMap[((*Image) >> (7 - Index)) & 0x1].Green;
Blt->Blue = BmpColorMap[((*Image) >> (7 - Index)) & 0x1].Blue;
Blt++;
Width++;
}
Blt --;
Width --;
break;
case 4:
//
// Convert BMP Palette to 24-bit color
//
Index = (*Image) >> 4;
Blt->Red = BmpColorMap[Index].Red;
Blt->Green = BmpColorMap[Index].Green;
Blt->Blue = BmpColorMap[Index].Blue;
if (Width < (BmpHeader->PixelWidth - 1)) {
Blt++;
Width++;
Index = (*Image) & 0x0f;
Blt->Red = BmpColorMap[Index].Red;
Blt->Green = BmpColorMap[Index].Green;
Blt->Blue = BmpColorMap[Index].Blue;
}
break;
case 8:
//
// Convert BMP Palette to 24-bit color
//
Blt->Red = BmpColorMap[*Image].Red;
Blt->Green = BmpColorMap[*Image].Green;
Blt->Blue = BmpColorMap[*Image].Blue;
break;
case 24:
Blt->Blue = *Image++;
Blt->Green = *Image++;
Blt->Red = *Image;
break;
default:
if (IsAllocated) {
gBS->FreePool (*GopBlt);
*GopBlt = NULL;
}
return EFI_UNSUPPORTED;
break;
};
}
ImageIndex = (UINTN) (Image - ImageHeader);
if ((ImageIndex % 4) != 0) {
//
// Bmp Image starts each row on a 32-bit boundary!
//
Image = Image + (4 - (ImageIndex % 4));
}
}
return EFI_SUCCESS;
}
EFI_STATUS
LockKeyboards (
IN CHAR16 *Password
)
/*++
Routine Description:
Use Console Control Protocol to lock the Console In Spliter virtual handle.
This is the ConInHandle and ConIn handle in the EFI system table. All key
presses will be ignored until the Password is typed in. The only way to
disable the password is to type it in to a ConIn device.
Arguments:
Password - Password used to lock ConIn device
Returns:
EFI_SUCCESS - ConsoleControl has been flipped to graphics and logo
displayed.
EFI_UNSUPPORTED - Logo not found
--*/
{
EFI_STATUS Status;
EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl;
Status = gBS->LocateProtocol (&gEfiConsoleControlProtocolGuid, NULL, (VOID**)&ConsoleControl);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
Status = ConsoleControl->LockStdIn (ConsoleControl, Password);
return Status;
}
EFI_STATUS
EnableQuietBoot (
IN EFI_GUID *LogoFile
)
/*++
Routine Description:
Use Console Control to turn off UGA based Simple Text Out consoles from going
to the UGA device. Put up LogoFile on every UGA device that is a console
Arguments:
LogoFile - File name of logo to display on the center of the screen.
Returns:
EFI_SUCCESS - ConsoleControl has been flipped to graphics and logo
displayed.
EFI_UNSUPPORTED - Logo not found
--*/
{
return EnableQuietBootEx (LogoFile, NULL);
}
EFI_STATUS
EnableQuietBootEx (
IN EFI_GUID *LogoFile,
IN EFI_HANDLE ImageHandle
)
/*++
Routine Description:
Use Console Control to turn off GOP/UGA based Simple Text Out consoles from going
to the GOP/UGA device. Put up LogoFile on every GOP/UGA device that is a console
Arguments:
LogoFile - File name of logo to display on the center of the screen.
ImageHandle - The driver image handle of the caller. The parameter is used to
optimize the loading of the logo file so that the FV from which
the driver image is loaded will be tried first.
Returns:
EFI_SUCCESS - ConsoleControl has been flipped to graphics and logo
displayed.
EFI_UNSUPPORTED - Logo not found
--*/
{
EFI_STATUS Status;
EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl;
EFI_OEM_BADGING_PROTOCOL *Badging;
UINT32 SizeOfX;
UINT32 SizeOfY;
INTN DestX;
INTN DestY;
UINT8 *ImageData;
UINTN ImageSize;
UINTN BltSize;
UINT32 Instance;
EFI_BADGING_FORMAT Format;
EFI_BADGING_DISPLAY_ATTRIBUTE Attribute;
UINTN CoordinateX;
UINTN CoordinateY;
UINTN Height;
UINTN Width;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Blt;
EFI_UGA_DRAW_PROTOCOL *UgaDraw;
UINT32 ColorDepth;
UINT32 RefreshRate;
EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
Status = gBS->LocateProtocol (&gEfiConsoleControlProtocolGuid, NULL, (VOID**)&ConsoleControl);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
UgaDraw = NULL;
//
// Try to open GOP first
//
Status = gBS->HandleProtocol (gST->ConsoleOutHandle, &gEfiGraphicsOutputProtocolGuid, (VOID**)&GraphicsOutput);
if (EFI_ERROR (Status)) {
GraphicsOutput = NULL;
//
// Open GOP failed, try to open UGA
//
Status = gBS->HandleProtocol (gST->ConsoleOutHandle, &gEfiUgaDrawProtocolGuid, (VOID**)&UgaDraw);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
}
Badging = NULL;
Status = gBS->LocateProtocol (&gEfiOEMBadgingProtocolGuid, NULL, (VOID**)&Badging);
ConsoleControl->SetMode (ConsoleControl, EfiConsoleControlScreenGraphics);
if (GraphicsOutput != NULL) {
SizeOfX = GraphicsOutput->Mode->Info->HorizontalResolution;
SizeOfY = GraphicsOutput->Mode->Info->VerticalResolution;
} else {
Status = UgaDraw->GetMode (UgaDraw, &SizeOfX, &SizeOfY, &ColorDepth, &RefreshRate);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
}
Instance = 0;
while (1) {
ImageData = NULL;
ImageSize = 0;
if (Badging != NULL) {
Status = Badging->GetImage (
Badging,
&Instance,
&Format,
&ImageData,
&ImageSize,
&Attribute,
&CoordinateX,
&CoordinateY
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Currently only support BMP format
//
if (Format != EfiBadgingFormatBMP) {
gBS->FreePool (ImageData);
continue;
}
} else {
Status = GetGraphicsBitMapFromFVEx (ImageHandle, LogoFile, (VOID **) &ImageData, &ImageSize);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
CoordinateX = 0;
CoordinateY = 0;
Attribute = EfiBadgingDisplayAttributeCenter;
}
Blt = NULL;
Status = ConvertBmpToGopBlt (
ImageData,
ImageSize,
(VOID**)&Blt,
&BltSize,
&Height,
&Width
);
if (EFI_ERROR (Status)) {
gBS->FreePool (ImageData);
if (Badging == NULL) {
return Status;
} else {
continue;
}
}
switch (Attribute) {
case EfiBadgingDisplayAttributeLeftTop:
DestX = CoordinateX;
DestY = CoordinateY;
break;
case EfiBadgingDisplayAttributeCenterTop:
DestX = (SizeOfX - Width) / 2;
DestY = CoordinateY;
break;
case EfiBadgingDisplayAttributeRightTop:
DestX = (SizeOfX - Width - CoordinateX);
DestY = CoordinateY;;
break;
case EfiBadgingDisplayAttributeCenterRight:
DestX = (SizeOfX - Width - CoordinateX);
DestY = (SizeOfY - Height) / 2;
break;
case EfiBadgingDisplayAttributeRightBottom:
DestX = (SizeOfX - Width - CoordinateX);
DestY = (SizeOfY - Height - CoordinateY);
break;
case EfiBadgingDisplayAttributeCenterBottom:
DestX = (SizeOfX - Width) / 2;
DestY = (SizeOfY - Height - CoordinateY);
break;
case EfiBadgingDisplayAttributeLeftBottom:
DestX = CoordinateX;
DestY = (SizeOfY - Height - CoordinateY);
break;
case EfiBadgingDisplayAttributeCenterLeft:
DestX = CoordinateX;
DestY = (SizeOfY - Height) / 2;
break;
case EfiBadgingDisplayAttributeCenter:
DestX = (SizeOfX - Width) / 2;
DestY = (SizeOfY - Height) / 2;
break;
default:
DestX = CoordinateX;
DestY = CoordinateY;
break;
}
if ((DestX >= 0) && (DestY >= 0)) {
if (GraphicsOutput != NULL) {
Status = GraphicsOutput->Blt (
GraphicsOutput,
Blt,
EfiBltBufferToVideo,
0,
0,
(UINTN) DestX,
(UINTN) DestY,
Width,
Height,
Width * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
);
} else {
Status = UgaDraw->Blt (
UgaDraw,
(EFI_UGA_PIXEL *) Blt,
EfiUgaBltBufferToVideo,
0,
0,
(UINTN) DestX,
(UINTN) DestY,
Width,
Height,
Width * sizeof (EFI_UGA_PIXEL)
);
}
}
gBS->FreePool (ImageData);
gBS->FreePool (Blt);
if (Badging == NULL) {
break;
}
}
return Status;
}
EFI_STATUS
DisableQuietBoot (
VOID
)
/*++
Routine Description:
Use Console Control to turn on GOP/UGA based Simple Text Out consoles. The GOP/UGA
Simple Text Out screens will now be synced up with all non GOP/UGA output devices
Arguments:
NONE
Returns:
EFI_SUCCESS - GOP/UGA devices are back in text mode and synced up.
EFI_UNSUPPORTED - Logo not found
--*/
{
EFI_STATUS Status;
EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl;
Status = gBS->LocateProtocol (&gEfiConsoleControlProtocolGuid, NULL, (VOID**)&ConsoleControl);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
return ConsoleControl->SetMode (ConsoleControl, EfiConsoleControlScreenText);
}