tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/MdeModulePkg/Bus/Pci/PciSioSerialDxe/SerialIo.c

1296 lines
36 KiB
C
Raw Blame History

/** @file
SerialIo implementation for PCI or SIO UARTs.
Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "Serial.h"
/**
Skip the optional Controller device path node and return the
pointer to the next device path node.
@param DevicePath Pointer to the device path.
@param ContainsControllerNode Returns TRUE if the Controller device path exists.
@param ControllerNumber Returns the Controller Number if Controller device path exists.
@return Pointer to the next device path node.
**/
UART_DEVICE_PATH *
SkipControllerDevicePathNode (
EFI_DEVICE_PATH_PROTOCOL *DevicePath,
BOOLEAN *ContainsControllerNode,
UINT32 *ControllerNumber
)
{
if ((DevicePathType (DevicePath) == HARDWARE_DEVICE_PATH) &&
(DevicePathSubType (DevicePath) == HW_CONTROLLER_DP)
) {
if (ContainsControllerNode != NULL) {
*ContainsControllerNode = TRUE;
}
if (ControllerNumber != NULL) {
*ControllerNumber = ((CONTROLLER_DEVICE_PATH *) DevicePath)->ControllerNumber;
}
DevicePath = NextDevicePathNode (DevicePath);
} else {
if (ContainsControllerNode != NULL) {
*ContainsControllerNode = FALSE;
}
}
return (UART_DEVICE_PATH *) DevicePath;
}
/**
Checks whether the UART parameters are valid and computes the Divisor.
@param ClockRate The clock rate of the serial device used to verify
the BaudRate. Do not verify the BaudRate if it's 0.
@param BaudRate The requested baudrate of the serial device.
@param DataBits Number of databits used in serial device.
@param Parity The type of parity used in serial device.
@param StopBits Number of stopbits used in serial device.
@param Divisor Return the divisor if ClockRate is not 0.
@param ActualBaudRate Return the actual supported baudrate without
exceeding BaudRate. NULL means baudrate degradation
is not allowed.
If the requested BaudRate is not supported, the routine
returns TRUE and the Actual Baud Rate when ActualBaudRate
is not NULL, returns FALSE when ActualBaudRate is NULL.
@retval TRUE The UART parameters are valid.
@retval FALSE The UART parameters are not valid.
**/
BOOLEAN
VerifyUartParameters (
IN UINT32 ClockRate,
IN UINT64 BaudRate,
IN UINT8 DataBits,
IN EFI_PARITY_TYPE Parity,
IN EFI_STOP_BITS_TYPE StopBits,
OUT UINT64 *Divisor,
OUT UINT64 *ActualBaudRate
)
{
UINT64 Remainder;
UINT32 ComputedBaudRate;
UINT64 ComputedDivisor;
UINT64 Percent;
if ((DataBits < 5) || (DataBits > 8) ||
(Parity < NoParity) || (Parity > SpaceParity) ||
(StopBits < OneStopBit) || (StopBits > TwoStopBits) ||
((DataBits == 5) && (StopBits == TwoStopBits)) ||
((DataBits >= 6) && (DataBits <= 8) && (StopBits == OneFiveStopBits))
) {
return FALSE;
}
//
// Do not verify the baud rate if clock rate is unknown (0).
//
if (ClockRate == 0) {
return TRUE;
}
//
// Compute divisor use to program the baud rate using a round determination
// Divisor = ClockRate / 16 / BaudRate = ClockRate / (16 * BaudRate)
// = ClockRate / (BaudRate << 4)
//
ComputedDivisor = DivU64x64Remainder (ClockRate, LShiftU64 (BaudRate, 4), &Remainder);
//
// Round Divisor up by 1 if the Remainder is more than half (16 * BaudRate)
// BaudRate * 16 / 2 = BaudRate * 8 = (BaudRate << 3)
//
if (Remainder >= LShiftU64 (BaudRate, 3)) {
ComputedDivisor++;
}
//
// If the computed divisor is larger than the maximum value that can be programmed
// into the UART, then the requested baud rate can not be supported.
//
if (ComputedDivisor > MAX_UINT16) {
return FALSE;
}
//
// If the computed divisor is 0, then use a computed divisor of 1, which will select
// the maximum supported baud rate.
//
if (ComputedDivisor == 0) {
ComputedDivisor = 1;
}
//
// Actual baud rate that the serial port will be programmed for
// should be with in 4% of requested one.
//
ComputedBaudRate = ClockRate / ((UINT16) ComputedDivisor << 4);
if (ComputedBaudRate == 0) {
return FALSE;
}
Percent = DivU64x32 (MultU64x32 (BaudRate, 100), ComputedBaudRate);
DEBUG ((EFI_D_INFO, "ClockRate = %d\n", ClockRate));
DEBUG ((EFI_D_INFO, "Divisor = %ld\n", ComputedDivisor));
DEBUG ((EFI_D_INFO, "BaudRate/Actual (%ld/%d) = %d%%\n", BaudRate, ComputedBaudRate, Percent));
//
// If the requested BaudRate is not supported:
// Returns TRUE and the Actual Baud Rate when ActualBaudRate is not NULL;
// Returns FALSE when ActualBaudRate is NULL.
//
if ((Percent >= 96) && (Percent <= 104)) {
if (ActualBaudRate != NULL) {
*ActualBaudRate = BaudRate;
}
if (Divisor != NULL) {
*Divisor = ComputedDivisor;
}
return TRUE;
}
if (ComputedBaudRate < BaudRate) {
if (ActualBaudRate != NULL) {
*ActualBaudRate = ComputedBaudRate;
}
if (Divisor != NULL) {
*Divisor = ComputedDivisor;
}
return TRUE;
}
//
// ActualBaudRate is higher than requested baud rate and more than 4%
// higher than the requested value. Increment Divisor if it is less
// than MAX_UINT16 and computed baud rate with new divisor.
//
if (ComputedDivisor == MAX_UINT16) {
return FALSE;
}
ComputedDivisor++;
ComputedBaudRate = ClockRate / ((UINT16) ComputedDivisor << 4);
if (ComputedBaudRate == 0) {
return FALSE;
}
DEBUG ((EFI_D_INFO, "ClockRate = %d\n", ClockRate));
DEBUG ((EFI_D_INFO, "Divisor = %ld\n", ComputedDivisor));
DEBUG ((EFI_D_INFO, "BaudRate/Actual (%ld/%d) = %d%%\n", BaudRate, ComputedBaudRate, Percent));
if (ActualBaudRate != NULL) {
*ActualBaudRate = ComputedBaudRate;
}
if (Divisor != NULL) {
*Divisor = ComputedDivisor;
}
return TRUE;
}
/**
Detect whether specific FIFO is full or not.
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
@return whether specific FIFO is full or not
**/
BOOLEAN
SerialFifoFull (
IN SERIAL_DEV_FIFO *Fifo
)
{
return (BOOLEAN) (((Fifo->Tail + 1) % SERIAL_MAX_FIFO_SIZE) == Fifo->Head);
}
/**
Detect whether specific FIFO is empty or not.
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
@return whether specific FIFO is empty or not
**/
BOOLEAN
SerialFifoEmpty (
IN SERIAL_DEV_FIFO *Fifo
)
{
return (BOOLEAN) (Fifo->Head == Fifo->Tail);
}
/**
Add data to specific FIFO.
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
@param Data the data added to FIFO
@retval EFI_SUCCESS Add data to specific FIFO successfully
@retval EFI_OUT_OF_RESOURCE Failed to add data because FIFO is already full
**/
EFI_STATUS
SerialFifoAdd (
IN OUT SERIAL_DEV_FIFO *Fifo,
IN UINT8 Data
)
{
//
// if FIFO full can not add data
//
if (SerialFifoFull (Fifo)) {
return EFI_OUT_OF_RESOURCES;
}
//
// FIFO is not full can add data
//
Fifo->Data[Fifo->Tail] = Data;
Fifo->Tail = (Fifo->Tail + 1) % SERIAL_MAX_FIFO_SIZE;
return EFI_SUCCESS;
}
/**
Remove data from specific FIFO.
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
@param Data the data removed from FIFO
@retval EFI_SUCCESS Remove data from specific FIFO successfully
@retval EFI_OUT_OF_RESOURCE Failed to remove data because FIFO is empty
**/
EFI_STATUS
SerialFifoRemove (
IN OUT SERIAL_DEV_FIFO *Fifo,
OUT UINT8 *Data
)
{
//
// if FIFO is empty, no data can remove
//
if (SerialFifoEmpty (Fifo)) {
return EFI_OUT_OF_RESOURCES;
}
//
// FIFO is not empty, can remove data
//
*Data = Fifo->Data[Fifo->Head];
Fifo->Head = (Fifo->Head + 1) % SERIAL_MAX_FIFO_SIZE;
return EFI_SUCCESS;
}
/**
Reads and writes all available data.
@param SerialDevice The device to transmit.
@retval EFI_SUCCESS Data was read/written successfully.
@retval EFI_OUT_OF_RESOURCE Failed because software receive FIFO is full. Note, when
this happens, pending writes are not done.
**/
EFI_STATUS
SerialReceiveTransmit (
IN SERIAL_DEV *SerialDevice
)
{
SERIAL_PORT_LSR Lsr;
UINT8 Data;
BOOLEAN ReceiveFifoFull;
SERIAL_PORT_MSR Msr;
SERIAL_PORT_MCR Mcr;
UINTN TimeOut;
Data = 0;
//
// Begin the read or write
//
if (SerialDevice->SoftwareLoopbackEnable) {
do {
ReceiveFifoFull = SerialFifoFull (&SerialDevice->Receive);
if (!SerialFifoEmpty (&SerialDevice->Transmit)) {
SerialFifoRemove (&SerialDevice->Transmit, &Data);
if (ReceiveFifoFull) {
return EFI_OUT_OF_RESOURCES;
}
SerialFifoAdd (&SerialDevice->Receive, Data);
}
} while (!SerialFifoEmpty (&SerialDevice->Transmit));
} else {
ReceiveFifoFull = SerialFifoFull (&SerialDevice->Receive);
//
// For full handshake flow control, tell the peer to send data
// if receive buffer is available.
//
if (SerialDevice->HardwareFlowControl &&
!FeaturePcdGet(PcdSerialUseHalfHandshake)&&
!ReceiveFifoFull
) {
Mcr.Data = READ_MCR (SerialDevice);
Mcr.Bits.Rts = 1;
WRITE_MCR (SerialDevice, Mcr.Data);
}
do {
Lsr.Data = READ_LSR (SerialDevice);
//
// Flush incomming data to prevent a an overrun during a long write
//
if ((Lsr.Bits.Dr == 1) && !ReceiveFifoFull) {
ReceiveFifoFull = SerialFifoFull (&SerialDevice->Receive);
if (!ReceiveFifoFull) {
if (Lsr.Bits.FIFOe == 1 || Lsr.Bits.Oe == 1 || Lsr.Bits.Pe == 1 || Lsr.Bits.Fe == 1 || Lsr.Bits.Bi == 1) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE,
EFI_P_EC_INPUT_ERROR | EFI_PERIPHERAL_SERIAL_PORT,
SerialDevice->DevicePath
);
if (Lsr.Bits.FIFOe == 1 || Lsr.Bits.Pe == 1|| Lsr.Bits.Fe == 1 || Lsr.Bits.Bi == 1) {
Data = READ_RBR (SerialDevice);
continue;
}
}
Data = READ_RBR (SerialDevice);
SerialFifoAdd (&SerialDevice->Receive, Data);
//
// For full handshake flow control, if receive buffer full
// tell the peer to stop sending data.
//
if (SerialDevice->HardwareFlowControl &&
!FeaturePcdGet(PcdSerialUseHalfHandshake) &&
SerialFifoFull (&SerialDevice->Receive)
) {
Mcr.Data = READ_MCR (SerialDevice);
Mcr.Bits.Rts = 0;
WRITE_MCR (SerialDevice, Mcr.Data);
}
continue;
} else {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
EFI_P_SERIAL_PORT_PC_CLEAR_BUFFER | EFI_PERIPHERAL_SERIAL_PORT,
SerialDevice->DevicePath
);
}
}
//
// Do the write
//
if (Lsr.Bits.Thre == 1 && !SerialFifoEmpty (&SerialDevice->Transmit)) {
//
// Make sure the transmit data will not be missed
//
if (SerialDevice->HardwareFlowControl) {
//
// For half handshake flow control assert RTS before sending.
//
if (FeaturePcdGet(PcdSerialUseHalfHandshake)) {
Mcr.Data = READ_MCR (SerialDevice);
Mcr.Bits.Rts= 0;
WRITE_MCR (SerialDevice, Mcr.Data);
}
//
// Wait for CTS
//
TimeOut = 0;
Msr.Data = READ_MSR (SerialDevice);
while ((Msr.Bits.Dcd == 1) && ((Msr.Bits.Cts == 0) ^ FeaturePcdGet(PcdSerialUseHalfHandshake))) {
gBS->Stall (TIMEOUT_STALL_INTERVAL);
TimeOut++;
if (TimeOut > 5) {
break;
}
Msr.Data = READ_MSR (SerialDevice);
}
if ((Msr.Bits.Dcd == 0) || ((Msr.Bits.Cts == 1) ^ FeaturePcdGet(PcdSerialUseHalfHandshake))) {
SerialFifoRemove (&SerialDevice->Transmit, &Data);
WRITE_THR (SerialDevice, Data);
}
//
// For half handshake flow control, tell DCE we are done.
//
if (FeaturePcdGet(PcdSerialUseHalfHandshake)) {
Mcr.Data = READ_MCR (SerialDevice);
Mcr.Bits.Rts = 1;
WRITE_MCR (SerialDevice, Mcr.Data);
}
} else {
SerialFifoRemove (&SerialDevice->Transmit, &Data);
WRITE_THR (SerialDevice, Data);
}
}
} while (Lsr.Bits.Thre == 1 && !SerialFifoEmpty (&SerialDevice->Transmit));
}
return EFI_SUCCESS;
}
//
// Interface Functions
//
/**
Reset serial device.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@retval EFI_SUCCESS Reset successfully
@retval EFI_DEVICE_ERROR Failed to reset
**/
EFI_STATUS
EFIAPI
SerialReset (
IN EFI_SERIAL_IO_PROTOCOL *This
)
{
EFI_STATUS Status;
SERIAL_DEV *SerialDevice;
SERIAL_PORT_LCR Lcr;
SERIAL_PORT_IER Ier;
SERIAL_PORT_MCR Mcr;
SERIAL_PORT_FCR Fcr;
EFI_TPL Tpl;
UINT32 Control;
SerialDevice = SERIAL_DEV_FROM_THIS (This);
//
// Report the status code reset the serial
//
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
EFI_P_PC_RESET | EFI_PERIPHERAL_SERIAL_PORT,
SerialDevice->DevicePath
);
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
//
// Make sure DLAB is 0.
//
Lcr.Data = READ_LCR (SerialDevice);
Lcr.Bits.DLab = 0;
WRITE_LCR (SerialDevice, Lcr.Data);
//
// Turn off all interrupts
//
Ier.Data = READ_IER (SerialDevice);
Ier.Bits.Ravie = 0;
Ier.Bits.Theie = 0;
Ier.Bits.Rie = 0;
Ier.Bits.Mie = 0;
WRITE_IER (SerialDevice, Ier.Data);
//
// Reset the FIFO
//
Fcr.Data = 0;
Fcr.Bits.TrFIFOE = 0;
WRITE_FCR (SerialDevice, Fcr.Data);
//
// Turn off loopback and disable device interrupt.
//
Mcr.Data = READ_MCR (SerialDevice);
Mcr.Bits.Out1 = 0;
Mcr.Bits.Out2 = 0;
Mcr.Bits.Lme = 0;
WRITE_MCR (SerialDevice, Mcr.Data);
//
// Clear the scratch pad register
//
WRITE_SCR (SerialDevice, 0);
//
// Enable FIFO
//
Fcr.Bits.TrFIFOE = 1;
if (SerialDevice->ReceiveFifoDepth > 16) {
Fcr.Bits.TrFIFO64 = 1;
}
Fcr.Bits.ResetRF = 1;
Fcr.Bits.ResetTF = 1;
WRITE_FCR (SerialDevice, Fcr.Data);
//
// Go set the current attributes
//
Status = This->SetAttributes (
This,
This->Mode->BaudRate,
This->Mode->ReceiveFifoDepth,
This->Mode->Timeout,
(EFI_PARITY_TYPE) This->Mode->Parity,
(UINT8) This->Mode->DataBits,
(EFI_STOP_BITS_TYPE) This->Mode->StopBits
);
if (EFI_ERROR (Status)) {
gBS->RestoreTPL (Tpl);
return EFI_DEVICE_ERROR;
}
//
// Go set the current control bits
//
Control = 0;
if (SerialDevice->HardwareFlowControl) {
Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
}
if (SerialDevice->SoftwareLoopbackEnable) {
Control |= EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE;
}
Status = This->SetControl (
This,
Control
);
if (EFI_ERROR (Status)) {
gBS->RestoreTPL (Tpl);
return EFI_DEVICE_ERROR;
}
//
// Reset the software FIFO
//
SerialDevice->Receive.Head = SerialDevice->Receive.Tail = 0;
SerialDevice->Transmit.Head = SerialDevice->Transmit.Tail = 0;
gBS->RestoreTPL (Tpl);
//
// Device reset is complete
//
return EFI_SUCCESS;
}
/**
Set new attributes to a serial device.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@param BaudRate The baudrate of the serial device
@param ReceiveFifoDepth The depth of receive FIFO buffer
@param Timeout The request timeout for a single char
@param Parity The type of parity used in serial device
@param DataBits Number of databits used in serial device
@param StopBits Number of stopbits used in serial device
@retval EFI_SUCCESS The new attributes were set
@retval EFI_INVALID_PARAMETERS One or more attributes have an unsupported value
@retval EFI_UNSUPPORTED Data Bits can not set to 5 or 6
@retval EFI_DEVICE_ERROR The serial device is not functioning correctly (no return)
**/
EFI_STATUS
EFIAPI
SerialSetAttributes (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN UINT64 BaudRate,
IN UINT32 ReceiveFifoDepth,
IN UINT32 Timeout,
IN EFI_PARITY_TYPE Parity,
IN UINT8 DataBits,
IN EFI_STOP_BITS_TYPE StopBits
)
{
EFI_STATUS Status;
SERIAL_DEV *SerialDevice;
UINT64 Divisor;
SERIAL_PORT_LCR Lcr;
UART_DEVICE_PATH *Uart;
EFI_TPL Tpl;
SerialDevice = SERIAL_DEV_FROM_THIS (This);
//
// Check for default settings and fill in actual values.
//
if (BaudRate == 0) {
BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
}
if (ReceiveFifoDepth == 0) {
ReceiveFifoDepth = SerialDevice->ReceiveFifoDepth;
}
if (Timeout == 0) {
Timeout = SERIAL_PORT_DEFAULT_TIMEOUT;
}
if (Parity == DefaultParity) {
Parity = (EFI_PARITY_TYPE) PcdGet8 (PcdUartDefaultParity);
}
if (DataBits == 0) {
DataBits = PcdGet8 (PcdUartDefaultDataBits);
}
if (StopBits == DefaultStopBits) {
StopBits = (EFI_STOP_BITS_TYPE) PcdGet8 (PcdUartDefaultStopBits);
}
if (!VerifyUartParameters (SerialDevice->ClockRate, BaudRate, DataBits, Parity, StopBits, &Divisor, &BaudRate)) {
return EFI_INVALID_PARAMETER;
}
if ((ReceiveFifoDepth == 0) || (ReceiveFifoDepth > SerialDevice->ReceiveFifoDepth)) {
return EFI_INVALID_PARAMETER;
}
if ((Timeout < SERIAL_PORT_MIN_TIMEOUT) || (Timeout > SERIAL_PORT_MAX_TIMEOUT)) {
return EFI_INVALID_PARAMETER;
}
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
//
// Put serial port on Divisor Latch Mode
//
Lcr.Data = READ_LCR (SerialDevice);
Lcr.Bits.DLab = 1;
WRITE_LCR (SerialDevice, Lcr.Data);
//
// Write the divisor to the serial port
//
WRITE_DLL (SerialDevice, (UINT8) Divisor);
WRITE_DLM (SerialDevice, (UINT8) ((UINT16) Divisor >> 8));
//
// Put serial port back in normal mode and set remaining attributes.
//
Lcr.Bits.DLab = 0;
switch (Parity) {
case NoParity:
Lcr.Bits.ParEn = 0;
Lcr.Bits.EvenPar = 0;
Lcr.Bits.SticPar = 0;
break;
case EvenParity:
Lcr.Bits.ParEn = 1;
Lcr.Bits.EvenPar = 1;
Lcr.Bits.SticPar = 0;
break;
case OddParity:
Lcr.Bits.ParEn = 1;
Lcr.Bits.EvenPar = 0;
Lcr.Bits.SticPar = 0;
break;
case SpaceParity:
Lcr.Bits.ParEn = 1;
Lcr.Bits.EvenPar = 1;
Lcr.Bits.SticPar = 1;
break;
case MarkParity:
Lcr.Bits.ParEn = 1;
Lcr.Bits.EvenPar = 0;
Lcr.Bits.SticPar = 1;
break;
default:
break;
}
switch (StopBits) {
case OneStopBit:
Lcr.Bits.StopB = 0;
break;
case OneFiveStopBits:
case TwoStopBits:
Lcr.Bits.StopB = 1;
break;
default:
break;
}
//
// DataBits
//
Lcr.Bits.SerialDB = (UINT8) ((DataBits - 5) & 0x03);
WRITE_LCR (SerialDevice, Lcr.Data);
//
// Set the Serial I/O mode
//
This->Mode->BaudRate = BaudRate;
This->Mode->ReceiveFifoDepth = ReceiveFifoDepth;
This->Mode->Timeout = Timeout;
This->Mode->Parity = Parity;
This->Mode->DataBits = DataBits;
This->Mode->StopBits = StopBits;
//
// See if Device Path Node has actually changed
//
if (SerialDevice->UartDevicePath.BaudRate == BaudRate &&
SerialDevice->UartDevicePath.DataBits == DataBits &&
SerialDevice->UartDevicePath.Parity == Parity &&
SerialDevice->UartDevicePath.StopBits == StopBits
) {
gBS->RestoreTPL (Tpl);
return EFI_SUCCESS;
}
//
// Update the device path
//
SerialDevice->UartDevicePath.BaudRate = BaudRate;
SerialDevice->UartDevicePath.DataBits = DataBits;
SerialDevice->UartDevicePath.Parity = (UINT8) Parity;
SerialDevice->UartDevicePath.StopBits = (UINT8) StopBits;
Status = EFI_SUCCESS;
if (SerialDevice->Handle != NULL) {
//
// Skip the optional Controller device path node
//
Uart = SkipControllerDevicePathNode (
(EFI_DEVICE_PATH_PROTOCOL *) (
(UINT8 *) SerialDevice->DevicePath + GetDevicePathSize (SerialDevice->ParentDevicePath) - END_DEVICE_PATH_LENGTH
),
NULL,
NULL
);
CopyMem (Uart, &SerialDevice->UartDevicePath, sizeof (UART_DEVICE_PATH));
Status = gBS->ReinstallProtocolInterface (
SerialDevice->Handle,
&gEfiDevicePathProtocolGuid,
SerialDevice->DevicePath,
SerialDevice->DevicePath
);
}
gBS->RestoreTPL (Tpl);
return Status;
}
/**
Set Control Bits.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@param Control Control bits that can be settable
@retval EFI_SUCCESS New Control bits were set successfully
@retval EFI_UNSUPPORTED The Control bits wanted to set are not supported
**/
EFI_STATUS
EFIAPI
SerialSetControl (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN UINT32 Control
)
{
SERIAL_DEV *SerialDevice;
SERIAL_PORT_MCR Mcr;
EFI_TPL Tpl;
UART_FLOW_CONTROL_DEVICE_PATH *FlowControl;
EFI_STATUS Status;
//
// The control bits that can be set are :
// EFI_SERIAL_DATA_TERMINAL_READY: 0x0001 // WO
// EFI_SERIAL_REQUEST_TO_SEND: 0x0002 // WO
// EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE: 0x1000 // RW
// EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE: 0x2000 // RW
// EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE: 0x4000 // RW
//
SerialDevice = SERIAL_DEV_FROM_THIS (This);
//
// first determine the parameter is invalid
//
if ((Control & (~(EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY |
EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE | EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE |
EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE))) != 0) {
return EFI_UNSUPPORTED;
}
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
Mcr.Data = READ_MCR (SerialDevice);
Mcr.Bits.DtrC = 0;
Mcr.Bits.Rts = 0;
Mcr.Bits.Lme = 0;
SerialDevice->SoftwareLoopbackEnable = FALSE;
SerialDevice->HardwareFlowControl = FALSE;
if ((Control & EFI_SERIAL_DATA_TERMINAL_READY) == EFI_SERIAL_DATA_TERMINAL_READY) {
Mcr.Bits.DtrC = 1;
}
if ((Control & EFI_SERIAL_REQUEST_TO_SEND) == EFI_SERIAL_REQUEST_TO_SEND) {
Mcr.Bits.Rts = 1;
}
if ((Control & EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) == EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) {
Mcr.Bits.Lme = 1;
}
if ((Control & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) == EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) {
SerialDevice->HardwareFlowControl = TRUE;
}
WRITE_MCR (SerialDevice, Mcr.Data);
if ((Control & EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE) == EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE) {
SerialDevice->SoftwareLoopbackEnable = TRUE;
}
Status = EFI_SUCCESS;
if (SerialDevice->Handle != NULL) {
FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) (
(UINTN) SerialDevice->DevicePath
+ GetDevicePathSize (SerialDevice->ParentDevicePath)
- END_DEVICE_PATH_LENGTH
+ sizeof (UART_DEVICE_PATH)
);
if (IsUartFlowControlDevicePathNode (FlowControl) &&
((BOOLEAN) (ReadUnaligned32 (&FlowControl->FlowControlMap) == UART_FLOW_CONTROL_HARDWARE) != SerialDevice->HardwareFlowControl)) {
//
// Flow Control setting is changed, need to reinstall device path protocol
//
WriteUnaligned32 (&FlowControl->FlowControlMap, SerialDevice->HardwareFlowControl ? UART_FLOW_CONTROL_HARDWARE : 0);
Status = gBS->ReinstallProtocolInterface (
SerialDevice->Handle,
&gEfiDevicePathProtocolGuid,
SerialDevice->DevicePath,
SerialDevice->DevicePath
);
}
}
gBS->RestoreTPL (Tpl);
return Status;
}
/**
Get ControlBits.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@param Control Control signals of the serial device
@retval EFI_SUCCESS Get Control signals successfully
**/
EFI_STATUS
EFIAPI
SerialGetControl (
IN EFI_SERIAL_IO_PROTOCOL *This,
OUT UINT32 *Control
)
{
SERIAL_DEV *SerialDevice;
SERIAL_PORT_MSR Msr;
SERIAL_PORT_MCR Mcr;
EFI_TPL Tpl;
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
SerialDevice = SERIAL_DEV_FROM_THIS (This);
*Control = 0;
//
// Read the Modem Status Register
//
Msr.Data = READ_MSR (SerialDevice);
if (Msr.Bits.Cts == 1) {
*Control |= EFI_SERIAL_CLEAR_TO_SEND;
}
if (Msr.Bits.Dsr == 1) {
*Control |= EFI_SERIAL_DATA_SET_READY;
}
if (Msr.Bits.Ri == 1) {
*Control |= EFI_SERIAL_RING_INDICATE;
}
if (Msr.Bits.Dcd == 1) {
*Control |= EFI_SERIAL_CARRIER_DETECT;
}
//
// Read the Modem Control Register
//
Mcr.Data = READ_MCR (SerialDevice);
if (Mcr.Bits.DtrC == 1) {
*Control |= EFI_SERIAL_DATA_TERMINAL_READY;
}
if (Mcr.Bits.Rts == 1) {
*Control |= EFI_SERIAL_REQUEST_TO_SEND;
}
if (Mcr.Bits.Lme == 1) {
*Control |= EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE;
}
if (SerialDevice->HardwareFlowControl) {
*Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
}
//
// Update FIFO status
//
SerialReceiveTransmit (SerialDevice);
//
// See if the Transmit FIFO is empty
//
if (SerialFifoEmpty (&SerialDevice->Transmit)) {
*Control |= EFI_SERIAL_OUTPUT_BUFFER_EMPTY;
}
//
// See if the Receive FIFO is empty.
//
if (SerialFifoEmpty (&SerialDevice->Receive)) {
*Control |= EFI_SERIAL_INPUT_BUFFER_EMPTY;
}
if (SerialDevice->SoftwareLoopbackEnable) {
*Control |= EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE;
}
gBS->RestoreTPL (Tpl);
return EFI_SUCCESS;
}
/**
Write the specified number of bytes to serial device.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@param BufferSize On input the size of Buffer, on output the amount of
data actually written
@param Buffer The buffer of data to write
@retval EFI_SUCCESS The data were written successfully
@retval EFI_DEVICE_ERROR The device reported an error
@retval EFI_TIMEOUT The write operation was stopped due to timeout
**/
EFI_STATUS
EFIAPI
SerialWrite (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
IN VOID *Buffer
)
{
SERIAL_DEV *SerialDevice;
UINT8 *CharBuffer;
UINT32 Index;
UINTN Elapsed;
UINTN ActualWrite;
EFI_TPL Tpl;
UINTN Timeout;
UINTN BitsPerCharacter;
SerialDevice = SERIAL_DEV_FROM_THIS (This);
Elapsed = 0;
ActualWrite = 0;
if (*BufferSize == 0) {
return EFI_SUCCESS;
}
if (Buffer == NULL) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE,
EFI_P_EC_OUTPUT_ERROR | EFI_PERIPHERAL_SERIAL_PORT,
SerialDevice->DevicePath
);
return EFI_DEVICE_ERROR;
}
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
CharBuffer = (UINT8 *) Buffer;
//
// Compute the number of bits in a single character. This is a start bit,
// followed by the number of data bits, followed by the number of stop bits.
// The number of stop bits is specified by an enumeration that includes
// support for 1.5 stop bits. Treat 1.5 stop bits as 2 stop bits.
//
BitsPerCharacter =
1 +
This->Mode->DataBits +
((This->Mode->StopBits == TwoStopBits) ? 2 : This->Mode->StopBits);
//
// Compute the timeout in microseconds to wait for a single byte to be
// transmitted. The Mode structure contans a Timeout field that is the
// maximum time to transmit or receive a character. However, many UARTs
// have a FIFO for transmits, so the time required to add one new character
// to the transmit FIFO may be the time required to flush a full FIFO. If
// the Timeout in the Mode structure is smaller than the time required to
// flush a full FIFO at the current baud rate, then use a timeout value that
// is required to flush a full transmit FIFO.
//
Timeout = MAX (
This->Mode->Timeout,
(UINTN)DivU64x64Remainder (
BitsPerCharacter * (SerialDevice->TransmitFifoDepth + 1) * 1000000,
This->Mode->BaudRate,
NULL
)
);
for (Index = 0; Index < *BufferSize; Index++) {
SerialFifoAdd (&SerialDevice->Transmit, CharBuffer[Index]);
while (SerialReceiveTransmit (SerialDevice) != EFI_SUCCESS || !SerialFifoEmpty (&SerialDevice->Transmit)) {
//
// Unsuccessful write so check if timeout has expired, if not,
// stall for a bit, increment time elapsed, and try again
//
if (Elapsed >= Timeout) {
*BufferSize = ActualWrite;
gBS->RestoreTPL (Tpl);
return EFI_TIMEOUT;
}
gBS->Stall (TIMEOUT_STALL_INTERVAL);
Elapsed += TIMEOUT_STALL_INTERVAL;
}
ActualWrite++;
//
// Successful write so reset timeout
//
Elapsed = 0;
}
gBS->RestoreTPL (Tpl);
return EFI_SUCCESS;
}
/**
Read the specified number of bytes from serial device.
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
@param BufferSize On input the size of Buffer, on output the amount of
data returned in buffer
@param Buffer The buffer to return the data into
@retval EFI_SUCCESS The data were read successfully
@retval EFI_DEVICE_ERROR The device reported an error
@retval EFI_TIMEOUT The read operation was stopped due to timeout
**/
EFI_STATUS
EFIAPI
SerialRead (
IN EFI_SERIAL_IO_PROTOCOL *This,
IN OUT UINTN *BufferSize,
OUT VOID *Buffer
)
{
SERIAL_DEV *SerialDevice;
UINT32 Index;
UINT8 *CharBuffer;
UINTN Elapsed;
EFI_STATUS Status;
EFI_TPL Tpl;
SerialDevice = SERIAL_DEV_FROM_THIS (This);
Elapsed = 0;
if (*BufferSize == 0) {
return EFI_SUCCESS;
}
if (Buffer == NULL) {
return EFI_DEVICE_ERROR;
}
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
Status = SerialReceiveTransmit (SerialDevice);
if (EFI_ERROR (Status)) {
*BufferSize = 0;
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE,
EFI_P_EC_INPUT_ERROR | EFI_PERIPHERAL_SERIAL_PORT,
SerialDevice->DevicePath
);
gBS->RestoreTPL (Tpl);
return EFI_DEVICE_ERROR;
}
CharBuffer = (UINT8 *) Buffer;
for (Index = 0; Index < *BufferSize; Index++) {
while (SerialFifoRemove (&SerialDevice->Receive, &(CharBuffer[Index])) != EFI_SUCCESS) {
//
// Unsuccessful read so check if timeout has expired, if not,
// stall for a bit, increment time elapsed, and try again
// Need this time out to get conspliter to work.
//
if (Elapsed >= This->Mode->Timeout) {
*BufferSize = Index;
gBS->RestoreTPL (Tpl);
return EFI_TIMEOUT;
}
gBS->Stall (TIMEOUT_STALL_INTERVAL);
Elapsed += TIMEOUT_STALL_INTERVAL;
Status = SerialReceiveTransmit (SerialDevice);
if (Status == EFI_DEVICE_ERROR) {
*BufferSize = Index;
gBS->RestoreTPL (Tpl);
return EFI_DEVICE_ERROR;
}
}
//
// Successful read so reset timeout
//
Elapsed = 0;
}
SerialReceiveTransmit (SerialDevice);
gBS->RestoreTPL (Tpl);
return EFI_SUCCESS;
}
/**
Use scratchpad register to test if this serial port is present.
@param SerialDevice Pointer to serial device structure
@return if this serial port is present
**/
BOOLEAN
SerialPresent (
IN SERIAL_DEV *SerialDevice
)
{
UINT8 Temp;
BOOLEAN Status;
Status = TRUE;
//
// Save SCR reg
//
Temp = READ_SCR (SerialDevice);
WRITE_SCR (SerialDevice, 0xAA);
if (READ_SCR (SerialDevice) != 0xAA) {
Status = FALSE;
}
WRITE_SCR (SerialDevice, 0x55);
if (READ_SCR (SerialDevice) != 0x55) {
Status = FALSE;
}
//
// Restore SCR
//
WRITE_SCR (SerialDevice, Temp);
return Status;
}
/**
Read serial port.
@param SerialDev Pointer to serial device
@param Offset Offset in register group
@return Data read from serial port
**/
UINT8
SerialReadRegister (
IN SERIAL_DEV *SerialDev,
IN UINT32 Offset
)
{
UINT8 Data;
EFI_STATUS Status;
if (SerialDev->PciDeviceInfo == NULL) {
return IoRead8 ((UINTN) SerialDev->BaseAddress + Offset * SerialDev->RegisterStride);
} else {
if (SerialDev->MmioAccess) {
Status = SerialDev->PciDeviceInfo->PciIo->Mem.Read (SerialDev->PciDeviceInfo->PciIo, EfiPciIoWidthUint8, EFI_PCI_IO_PASS_THROUGH_BAR,
SerialDev->BaseAddress + Offset * SerialDev->RegisterStride, 1, &Data);
} else {
Status = SerialDev->PciDeviceInfo->PciIo->Io.Read (SerialDev->PciDeviceInfo->PciIo, EfiPciIoWidthUint8, EFI_PCI_IO_PASS_THROUGH_BAR,
SerialDev->BaseAddress + Offset * SerialDev->RegisterStride, 1, &Data);
}
ASSERT_EFI_ERROR (Status);
return Data;
}
}
/**
Write serial port.
@param SerialDev Pointer to serial device
@param Offset Offset in register group
@param Data data which is to be written to some serial port register
**/
VOID
SerialWriteRegister (
IN SERIAL_DEV *SerialDev,
IN UINT32 Offset,
IN UINT8 Data
)
{
EFI_STATUS Status;
if (SerialDev->PciDeviceInfo == NULL) {
IoWrite8 ((UINTN) SerialDev->BaseAddress + Offset * SerialDev->RegisterStride, Data);
} else {
if (SerialDev->MmioAccess) {
Status = SerialDev->PciDeviceInfo->PciIo->Mem.Write (SerialDev->PciDeviceInfo->PciIo, EfiPciIoWidthUint8, EFI_PCI_IO_PASS_THROUGH_BAR,
SerialDev->BaseAddress + Offset * SerialDev->RegisterStride, 1, &Data);
} else {
Status = SerialDev->PciDeviceInfo->PciIo->Io.Write (SerialDev->PciDeviceInfo->PciIo, EfiPciIoWidthUint8, EFI_PCI_IO_PASS_THROUGH_BAR,
SerialDev->BaseAddress + Offset * SerialDev->RegisterStride, 1, &Data);
}
ASSERT_EFI_ERROR (Status);
}
}
Reference in New Issue View Git Blame Copy Permalink