audk/ArmPlatformPkg/Documentation/ArmRealViewRTSMInstructions...

33 lines
1.3 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

==============================================
= ARM RealView Emulation Board Documentation =
==============================================
Howto build UEFI RealView EB for RealTime System Model
------------------------------------------------------
1. Set up the environment. And build the EDK2s tools
export EDK_TOOLS_PATH=`pwd`/BaseTools
. edksetup.sh `pwd`/BaseTools/
make -C $EDK_TOOLS_PATH
2. Build the ARM RealView EB UEFI Firmware
build -a ARM -p ArmPlatformPkg/ArmRealViewEBPkg/ArmRealViewEb-RTSM-A8.dsc -t RVCT
Howto test UEFI RealView EB on RealTime System Model - Example Cortex A8
------------------------------------------------------------------------
1. Build 'ArmRealViewEb-RTSM-A8.dsc'
2. To Run ArmRealViewEbPkg on the RTSM
1. Start RealView Debugger
2. Target > "Connect to Target"
3. Add RTSM
4. Configure this new RTSM.
5. Choose CortexA8
6. Setup the 'fname' of baseboard.flashldr_0 with your FD file (eg: c:\dev\edk2\Build\ArmRealViewEb-RTSM-A8\DEBUG_RVCT\FV\ARMREALVIEWEB_EFI.fd)
7. Turn use_s8 to TRUE in baseboard.sp810_sysctrl
8. Turn uart_enable to TRUE in baseboard.uart_0
4. Connect a telnet client to the port 5000 of your localhost
5. Launch the program