mirror of https://github.com/acidanthera/audk.git
493 lines
25 KiB
C
493 lines
25 KiB
C
/** @file
|
|
UEFI Firmware Management Protocol definition
|
|
Firmware Management Protocol provides an abstraction for device to provide firmware
|
|
management support. The base requirements for managing device firmware images include
|
|
identifying firmware image revision level and programming the image into the device.
|
|
|
|
GetImageInfo() is the only required function. GetImage(), SetImage(),
|
|
CheckImage(), GetPackageInfo(), and SetPackageInfo() shall return
|
|
EFI_UNSUPPORTED if not supported by the driver.
|
|
|
|
Copyright (c) 2009, Intel Corporation
|
|
All rights reserved. This program and the accompanying materials
|
|
are licensed and made available under the terms and conditions of the BSD License
|
|
which accompanies this distribution. The full text of the license may be found at
|
|
http://opensource.org/licenses/bsd-license.php
|
|
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
|
|
@par Revision Reference:
|
|
This Protocol is introduced in UEFI Specification 2.3
|
|
|
|
**/
|
|
|
|
#ifndef __EFI_FIRMWARE_MANAGEMENT_PROTOCOL_H__
|
|
#define __EFI_FIRMWARE_MANAGEMENT_PROTOCOL_H__
|
|
|
|
|
|
#define EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GUID \
|
|
{ \
|
|
0x86c77a67, 0xb97, 0x4633, {0xa1, 0x87, 0x49, 0x10, 0x4d, 0x6, 0x85, 0xc7 } \
|
|
}
|
|
|
|
typedef struct _EFI_FIRMWARE_MANAGEMENT_PROTOCOL EFI_FIRMWARE_MANAGEMENT_PROTOCOL;
|
|
|
|
///
|
|
/// EFI_FIRMWARE_IMAGE_DESCRIPTOR
|
|
///
|
|
typedef struct {
|
|
///
|
|
/// A unique number identifying the firmware image within the device. The number is
|
|
/// between 1 and DescriptorCount.
|
|
///
|
|
UINT8 ImageIndex;
|
|
///
|
|
/// A unique number identifying the firmware image type.
|
|
///
|
|
EFI_GUID ImageTypeId;
|
|
///
|
|
/// A unique number identifying the firmware image.
|
|
///
|
|
UINT64 ImageId;
|
|
///
|
|
/// A pointer to a null-terminated Unicode string representing the firmware image name.
|
|
///
|
|
CHAR16 *ImageIdName;
|
|
///
|
|
/// Identifies the version of the device firmware. The format is vendor specific and new
|
|
/// version must have a greater value than an old version.
|
|
///
|
|
UINT32 Version;
|
|
///
|
|
/// A pointer to a null-terminated Unicode string representing the firmware image version name.
|
|
///
|
|
CHAR16 *VersionName;
|
|
///
|
|
/// Size of the image in bytes. If size=0, then only ImageIndex and ImageTypeId are valid.
|
|
///
|
|
UINTN Size;
|
|
///
|
|
/// Image attributes that are supported by this device. See 'Image Attribute Definitions'
|
|
/// for possible returned values of this parameter. A value of 1 indicates the attribute is
|
|
/// supported and the current setting value is indicated in AttributesSetting. A
|
|
/// value of 0 indicates the attribute is not supported and the current setting value in
|
|
/// AttributesSetting is meaningless.
|
|
///
|
|
UINT64 AttributesSupported;
|
|
///
|
|
/// Image attributes. See 'Image Attribute Definitions' for possible returned values of
|
|
/// this parameter.
|
|
///
|
|
UINT64 AttributesSetting;
|
|
///
|
|
/// Image compatibilities. See 'Image Compatibility Definitions' for possible returned
|
|
/// values of this parameter.
|
|
///
|
|
UINT64 Compatibilities;
|
|
} EFI_FIRMWARE_IMAGE_DESCRIPTOR;
|
|
|
|
|
|
//
|
|
// Image Attribute Definitions
|
|
//
|
|
///
|
|
/// The attribute IMAGE_ATTRIBUTE_IMAGE_UPDATABLE indicates this device supports firmware
|
|
/// image update.
|
|
///
|
|
#define IMAGE_ATTRIBUTE_IMAGE_UPDATABLE 0x0000000000000001
|
|
///
|
|
/// The attribute IMAGE_ATTRIBUTE_RESET_REQUIRED indicates a reset of the device is required
|
|
/// for the new firmware image to take effect after a firmware update. The device is the device hosting
|
|
/// the firmware image.
|
|
///
|
|
#define IMAGE_ATTRIBUTE_RESET_REQUIRED 0x0000000000000002
|
|
///
|
|
/// The attribute IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED indicates authentication is
|
|
/// required to perform the following image operations: GetImage(), SetImage(), and
|
|
/// CheckImage(). See 'Image Attribute - Authentication'.
|
|
///
|
|
#define IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED 0x0000000000000004
|
|
///
|
|
/// The attribute IMAGE_ATTRIBUTE_IN_USE indicates the current state of the firmware image.
|
|
/// This distinguishes firmware images in a device that supports redundant images.
|
|
///
|
|
#define IMAGE_ATTRIBUTE_IN_USE 0x0000000000000008
|
|
|
|
|
|
//
|
|
// Image Compatibility Definitions
|
|
//
|
|
/// Values from 0x0000000000000002 thru 0x000000000000FFFF are reserved for future assignments.
|
|
/// Values from 0x0000000000010000 thru 0xFFFFFFFFFFFFFFFF are used by firmware vendor for
|
|
/// compatibility check.
|
|
///
|
|
#define IMAGE_COMPATIBILITY_CHECK_SUPPORTED 0x0000000000000001
|
|
|
|
///
|
|
/// Descriptor Version
|
|
///
|
|
#define EFI_FIRMWARE_IMAGE_DESCRIPTOR_VERSION 1
|
|
|
|
|
|
///
|
|
/// Image Attribute -Authentication Required
|
|
///
|
|
typedef struct {
|
|
///
|
|
/// It is included in the signature of AuthInfo. It is used to ensure freshness/no replay.
|
|
/// It is incremented during each firmware image operation.
|
|
///
|
|
UINT64 MonotonicCount;
|
|
///
|
|
/// Provides the authorization for the firmware image operations. It is a signature across
|
|
/// the image data and the Monotonic Count value. Caller uses the private key that is
|
|
/// associated with a public key that has been provisioned via the key exchange.
|
|
///
|
|
WIN_CERTIFICATE_UEFI_GUID AuthInfo;
|
|
} EFI_FIRMWARE_IMAGE_AUTHENTICATION;
|
|
|
|
|
|
//
|
|
// ImageUpdatable Definitions
|
|
//
|
|
///
|
|
/// IMAGE_UPDATABLE_VALID indicates SetImage() will accept the new image and update the
|
|
/// device with the new image.
|
|
///
|
|
#define IMAGE_UPDATABLE_VALID 0x0000000000000001
|
|
///
|
|
/// IMAGE_UPDATABLE_INVALID indicates SetImage() will reject the new image. No additional
|
|
/// information is provided for the rejection.
|
|
///
|
|
#define IMAGE_UPDATABLE_INVALID 0x0000000000000002
|
|
///
|
|
/// IMAGE_UPDATABLE_INVALID_TYPE indicates SetImage() will reject the new image. The
|
|
/// rejection is due to the new image is not a firmware image recognized for this device.
|
|
///
|
|
#define IMAGE_UPDATABLE_INVALID_TYPE 0x0000000000000004
|
|
///
|
|
/// IMAGE_UPDATABLE_INVALID_OLD indicates SetImage() will reject the new image. The
|
|
/// rejection is due to the new image version is older than the current firmware image
|
|
/// version in the device. The device firmware update policy does not support firmware
|
|
/// version downgrade.
|
|
///
|
|
#define IMAGE_UPDATABLE_INVALID_OLD 0x0000000000000008
|
|
|
|
|
|
//
|
|
// Package Attribute Definitions
|
|
//
|
|
///
|
|
/// The attribute PACKAGE_ATTRIBUTE_VERSION_UPDATABLE indicates this device supports the
|
|
/// update of the firmware package version.
|
|
///
|
|
#define PACKAGE_ATTRIBUTE_VERSION_UPDATABLE 0x0000000000000001
|
|
///
|
|
/// The attribute PACKAGE_ATTRIBUTE_RESET_REQUIRED indicates a reset of the device is
|
|
/// required for the new package info to take effect after an update.
|
|
///
|
|
#define PACKAGE_ATTRIBUTE_RESET_REQUIRED 0x0000000000000002
|
|
///
|
|
/// The attribute PACKAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED indicates authentication
|
|
/// is required to update the package info.
|
|
///
|
|
#define PACKAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED 0x0000000000000004
|
|
|
|
/**
|
|
Callback funtion to report the process of the firmware updating.
|
|
|
|
@param[in] Completion A value between 1 and 100 indicating the current completion
|
|
progress of the firmware update. Completion progress is
|
|
reported as from 1 to 100 percent. A value of 0 is used by
|
|
the driver to indicate that progress reporting is not supported.
|
|
|
|
@retval EFI_SUCCESS SetImage() continues to do the callback if supported.
|
|
@retval other SetImage() discontinues the callback and completes
|
|
the update and returns.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS)(
|
|
IN UINTN Completion
|
|
);
|
|
|
|
/**
|
|
Returns information about the current firmware image(s) of the device.
|
|
|
|
This function allows a copy of the current firmware image to be created and saved.
|
|
The saved copy could later been used, for example, in firmware image recovery or rollback.
|
|
|
|
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
|
|
@param[in, out] ImageInfoSize A pointer to the size, in bytes, of the ImageInfo buffer.
|
|
On input, this is the size of the buffer allocated by the caller.
|
|
On output, it is the size of the buffer returned by the firmware
|
|
if the buffer was large enough, or the size of the buffer needed
|
|
to contain the image(s) information if the buffer was too small.
|
|
@param[in, out] ImageInfo A pointer to the buffer in which firmware places the current image(s)
|
|
information. The information is an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
|
|
@param[out] DescriptorVersion A pointer to the location in which firmware returns the version number
|
|
associated with the EFI_FIRMWARE_IMAGE_DESCRIPTOR.
|
|
@param[out] DescriptorCount A pointer to the location in which firmware returns the number of
|
|
descriptors or firmware images within this device.
|
|
@param[out] DescriptorSize A pointer to the location in which firmware returns the size, in bytes,
|
|
of an individual EFI_FIRMWARE_IMAGE_DESCRIPTOR.
|
|
@param[out] PackageVersion A version number that represents all the firmware images in the device.
|
|
The format is vendor specific and new version must have a greater value
|
|
than the old version. If PackageVersion is not supported, the value is
|
|
0xFFFFFFFF. A value of 0xFFFFFFFE indicates that package version comparison
|
|
is to be performed using PackageVersionName. A value of 0xFFFFFFFD indicates
|
|
that package version update is in progress.
|
|
@param[out] PackageVersionName A pointer to a pointer to a null-terminated Unicode string representing the
|
|
package version name. The buffer is allocated by this function with
|
|
AllocatePool(), and it is the caller's responsibility to free it with a call
|
|
to FreePool().
|
|
|
|
@retval EFI_SUCCESS The device was successfully updated with the new image.
|
|
@retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too small. The current buffer size
|
|
needed to hold the image(s) information is returned in ImageInfoSize.
|
|
@retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
|
|
@retval EFI_DEVICE_ERROR Valid information could not be returned. Possible corrupted image.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE_INFO)(
|
|
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
|
|
IN OUT UINTN *ImageInfoSize,
|
|
IN OUT EFI_FIRMWARE_IMAGE_DESCRIPTOR *ImageInfo,
|
|
OUT UINT32 *DescriptorVersion,
|
|
OUT UINT8 *DescriptorCount,
|
|
OUT UINTN *DescriptorSize,
|
|
OUT UINT32 *PackageVersion,
|
|
OUT CHAR16 **PackageVersionName
|
|
);
|
|
|
|
/**
|
|
Retrieves a copy of the current firmware image of the device.
|
|
|
|
This function allows a copy of the current firmware image to be created and saved.
|
|
The saved copy could later been used, for example, in firmware image recovery or rollback.
|
|
|
|
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
|
|
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
|
|
The number is between 1 and DescriptorCount.
|
|
@param[out] Image Points to the buffer where the current image is copied to.
|
|
@param[out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes.
|
|
On return, points to the length of the image, in bytes.
|
|
|
|
@retval EFI_SUCCESS The device was successfully updated with the new image.
|
|
@retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to hold the
|
|
image. The current buffer size needed to hold the image is returned
|
|
in ImageSize.
|
|
@retval EFI_INVALID_PARAMETER The Image was NULL.
|
|
@retval EFI_NOT_FOUND The current image is not copied to the buffer.
|
|
@retval EFI_UNSUPPORTED The operation is not supported.
|
|
@retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE)(
|
|
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
|
|
IN UINT8 ImageIndex,
|
|
IN OUT VOID *Image,
|
|
IN OUT UINTN *ImageSize
|
|
);
|
|
|
|
/**
|
|
Updates the firmware image of the device.
|
|
|
|
This function updates the hardware with the new firmware image.
|
|
This function returns EFI_UNSUPPORTED if the firmware image is not updatable.
|
|
If the firmware image is updatable, the function should perform the following minimal validations
|
|
before proceeding to do the firmware image update.
|
|
- Validate the image authentication if image has attribute
|
|
IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED. The function returns
|
|
EFI_SECURITY_VIOLATION if the validation fails.
|
|
- Validate the image is a supported image for this device. The function returns EFI_ABORTED if
|
|
the image is unsupported. The function can optionally provide more detailed information on
|
|
why the image is not a supported image.
|
|
- Validate the data from VendorCode if not null. Image validation must be performed before
|
|
VendorCode data validation. VendorCode data is ignored or considered invalid if image
|
|
validation failed. The function returns EFI_ABORTED if the data is invalid.
|
|
|
|
VendorCode enables vendor to implement vendor-specific firmware image update policy. Null if
|
|
the caller did not specify the policy or use the default policy. As an example, vendor can implement
|
|
a policy to allow an option to force a firmware image update when the abort reason is due to the new
|
|
firmware image version is older than the current firmware image version or bad image checksum.
|
|
Sensitive operations such as those wiping the entire firmware image and render the device to be
|
|
non-functional should be encoded in the image itself rather than passed with the VendorCode.
|
|
AbortReason enables vendor to have the option to provide a more detailed description of the abort
|
|
reason to the caller.
|
|
|
|
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
|
|
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
|
|
The number is between 1 and DescriptorCount.
|
|
@param[in] Image Points to the new image.
|
|
@param[in] ImageSize Size of the new image in bytes.
|
|
@param[in] VendorCode This enables vendor to implement vendor-specific firmware image update policy.
|
|
Null indicates the caller did not specify the policy or use the default policy.
|
|
@param[in] Progress A function used by the driver to report the progress of the firmware update.
|
|
@param[out] AbortReason A pointer to a pointer to a null-terminated Unicode string providing more
|
|
details for the aborted operation. The buffer is allocated by this function
|
|
with AllocatePool(), and it is the caller's responsibility to free it with a
|
|
call to FreePool().
|
|
|
|
@retval EFI_SUCCESS The device was successfully updated with the new image.
|
|
@retval EFI_ABORTED The operation is aborted.
|
|
@retval EFI_INVALID_PARAMETER The Image was NULL.
|
|
@retval EFI_UNSUPPORTED The operation is not supported.
|
|
@retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_IMAGE)(
|
|
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
|
|
IN UINT8 ImageIndex,
|
|
IN CONST VOID *Image,
|
|
IN UINTN ImageSize,
|
|
IN CONST VOID *VendorCode,
|
|
IN EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS Progress,
|
|
OUT CHAR16 **AbortReason
|
|
);
|
|
|
|
/**
|
|
Checks if the firmware image is valid for the device.
|
|
|
|
This function allows firmware update application to validate the firmware image without
|
|
invoking the SetImage() first.
|
|
|
|
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
|
|
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
|
|
The number is between 1 and DescriptorCount.
|
|
@param[in] Image Points to the new image.
|
|
@param[in] ImageSize Size of the new image in bytes.
|
|
@param[out] ImageUpdatable Indicates if the new image is valid for update. It also provides,
|
|
if available, additional information if the image is invalid.
|
|
|
|
@retval EFI_SUCCESS The image was successfully checked.
|
|
@retval EFI_INVALID_PARAMETER The Image was NULL.
|
|
@retval EFI_UNSUPPORTED The operation is not supported.
|
|
@retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_CHECK_IMAGE)(
|
|
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
|
|
IN UINT8 ImageIndex,
|
|
IN CONST VOID *Image,
|
|
IN UINTN ImageSize,
|
|
OUT UINT32 *ImageUpdatable
|
|
);
|
|
|
|
/**
|
|
Returns information about the firmware package.
|
|
|
|
This function returns package information.
|
|
|
|
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
|
|
@param[out] PackageVersion A version number that represents all the firmware images in the device.
|
|
The format is vendor specific and new version must have a greater value
|
|
than the old version. If PackageVersion is not supported, the value is
|
|
0xFFFFFFFF. A value of 0xFFFFFFFE indicates that package version
|
|
comparison is to be performed using PackageVersionName. A value of
|
|
0xFFFFFFFD indicates that package version update is in progress.
|
|
@param[out] PackageVersionName A pointer to a pointer to a null-terminated Unicode string representing
|
|
the package version name. The buffer is allocated by this function with
|
|
AllocatePool(), and it is the caller's responsibility to free it with a
|
|
call to FreePool().
|
|
@param[out] PackageVersionNameMaxLen The maximum length of package version name if device supports update of
|
|
package version name. A value of 0 indicates the device does not support
|
|
update of package version name. Length is the number of Unicode characters,
|
|
including the terminating null character.
|
|
@param[out] AttributesSupported Package attributes that are supported by this device. See 'Package Attribute
|
|
Definitions' for possible returned values of this parameter. A value of 1
|
|
indicates the attribute is supported and the current setting value is
|
|
indicated in AttributesSetting. A value of 0 indicates the attribute is not
|
|
supported and the current setting value in AttributesSetting is meaningless.
|
|
@param[out] AttributesSetting Package attributes. See 'Package Attribute Definitions' for possible returned
|
|
values of this parameter
|
|
|
|
@retval EFI_SUCCESS The package information was successfully returned.
|
|
@retval EFI_UNSUPPORTED The operation is not supported.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_PACKAGE_INFO)(
|
|
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
|
|
OUT UINT32 *PackageVersion,
|
|
OUT CHAR16 **PackageVersionName,
|
|
OUT UINT32 *PackageVersionNameMaxLen,
|
|
OUT UINT64 *AttributesSupported,
|
|
OUT UINT64 *AttributesSetting
|
|
);
|
|
|
|
/**
|
|
Updates information about the firmware package.
|
|
|
|
This function updates package information.
|
|
This function returns EFI_UNSUPPORTED if the package information is not updatable.
|
|
VendorCode enables vendor to implement vendor-specific package information update policy.
|
|
Null if the caller did not specify this policy or use the default policy.
|
|
|
|
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
|
|
@param[in] Image Points to the authentication image.
|
|
Null if authentication is not required.
|
|
@param[in] ImageSize Size of the authentication image in bytes.
|
|
0 if authentication is not required.
|
|
@param[in] VendorCode This enables vendor to implement vendor-specific firmware
|
|
image update policy.
|
|
Null indicates the caller did not specify this policy or use
|
|
the default policy.
|
|
@param[in] PackageVersion The new package version.
|
|
@param[in] PackageVersionName A pointer to the new null-terminated Unicode string representing
|
|
the package version name.
|
|
The string length is equal to or less than the value returned in
|
|
PackageVersionNameMaxLen.
|
|
|
|
@retval EFI_SUCCESS The device was successfully updated with the new package
|
|
information.
|
|
@retval EFI_INVALID_PARAMETER The PackageVersionName length is longer than the value
|
|
returned in PackageVersionNameMaxLen.
|
|
@retval EFI_UNSUPPORTED The operation is not supported.
|
|
@retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_PACKAGE_INFO)(
|
|
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
|
|
IN CONST VOID *Image,
|
|
IN UINTN ImageSize,
|
|
IN CONST VOID *VendorCode,
|
|
IN UINT32 PackageVersion,
|
|
IN CONST CHAR16 *PackageVersionName
|
|
);
|
|
|
|
///
|
|
/// EFI_FIRMWARE_MANAGEMENT_PROTOCOL
|
|
/// The protocol for managing firmware provides the following services.
|
|
/// - Get the attributes of the current firmware image. Attributes include revision level.
|
|
/// - Get a copy of the current firmware image. As an example, this service could be used by a
|
|
/// management application to facilitate a firmware roll-back.
|
|
/// - Program the device with a firmware image supplied by the user.
|
|
/// - Label all the firmware images within a device with a single version.
|
|
///
|
|
struct _EFI_FIRMWARE_MANAGEMENT_PROTOCOL {
|
|
EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE_INFO GetImageInfo;
|
|
EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE GetImage;
|
|
EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_IMAGE SetImage;
|
|
EFI_FIRMWARE_MANAGEMENT_PROTOCOL_CHECK_IMAGE CheckImage;
|
|
EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_PACKAGE_INFO GetPackageInfo;
|
|
EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_PACKAGE_INFO SetPackageInfo;
|
|
};
|
|
|
|
extern EFI_GUID gEfiFirmwareManagementProtocolGuid;
|
|
|
|
#endif
|