tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.fdf

342 lines
12 KiB
Plaintext
Raw Blame History

#
# Copyright (c) 2011 - 2014, ARM Limited. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.FVP_AARCH64_EFI_SEC]
BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in SecureROM.
Size = 0x04000000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the device (64MiB).
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
NumBlocks = 0x4000
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x00000000|0x00080000
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
FV = FVMAIN_SEC
[FD.FVP_AARCH64_EFI]
!ifdef ARM_FVP_RUN_NORFLASH
BaseAddress = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in Flash0.
!else
BaseAddress = 0x88000000|gArmTokenSpaceGuid.PcdFdBaseAddress # UEFI in DRAM + 128MB.
!endif
Size = 0x04000000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the device (64MiB).
ErasePolarity = 1
# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize = 0x00001000
NumBlocks = 0x4000
0x00000000|0x00280000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVMAIN_SEC]
FvBaseAddress = 0x0 # Secure ROM
FvForceRebase = TRUE
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF ArmPlatformPkg/Sec/Sec.inf
[FV.FvMain]
BlockSize = 0x40
NumBlocks = 0 # This FV gets compressed so make it just big enough
FvAlignment = 16 # FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF MdeModulePkg/Core/Dxe/DxeMain.inf
#
# PI DXE Drivers producing Architectural Protocols (EFI Services)
#
INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
#
# Multiple Console IO support
#
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF EmbeddedPkg/SerialDxe/SerialDxe.inf
INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
!ifndef ARM_FOUNDATION_FVP
INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
!endif
INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
#
# Semi-hosting filesystem
#
INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
#
# FAT filesystem + GPT/MBR partitioning
#
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF FatBinPkg/EnhancedFatDxe/Fat.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
!ifndef ARM_FOUNDATION_FVP
#
# Multimedia Card Interface
#
INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
!endif
#
# Platform Driver
#
INF ArmPlatformPkg/ArmVExpressPkg/ArmVExpressDxe/ArmFvpDxe.inf
INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
#
# UEFI application (Shell Embedded Boot Loader)
#
INF ShellBinPkg/UefiShell/UefiShell.inf
#
# Bds
#
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF ArmPlatformPkg/Bds/Bds.inf
[FV.FVMAIN_COMPACT]
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
!if $(EDK2_SKIP_PEICORE) == 1
INF ArmPlatformPkg/PrePi/PeiMPCore.inf
!else
INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
INF ArmPkg/Drivers/CpuPei/CpuPei.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
!endif
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
SECTION FV_IMAGE = FVMAIN
}
}
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
############################################################################
#
#[Rule.Common.DXE_DRIVER]
# FILE DRIVER = $(NAMED_GUID) {
# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
# COMPRESS PI_STD {
# GUIDED {
# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
# UI STRING="$(MODULE_NAME)" Optional
# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
# }
# }
# }
#
############################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
TE TE Align = 4K $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM.TIANOCOMPRESSED]
FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
UI STRING ="$(MODULE_NAME)" Optional
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.UEFI_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.BINARY]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
Reference in New Issue View Git Blame Copy Permalink