audk/MdePkg/Include/IndustryStandard/Scsi.h

413 lines
14 KiB
C

/** @file
Support for SCSI-2 standard
Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __SCSI_H__
#define __SCSI_H__
//
// SCSI command OP Code
//
//
// Commands for all device types
//
#define EFI_SCSI_OP_CHANGE_DEFINITION 0x40
#define EFI_SCSI_OP_COMPARE 0x39
#define EFI_SCSI_OP_COPY 0x18
#define EFI_SCSI_OP_COPY_VERIFY 0x3a
#define EFI_SCSI_OP_INQUIRY 0x12
#define EFI_SCSI_OP_LOG_SELECT 0x4c
#define EFI_SCSI_OP_LOG_SENSE 0x4d
#define EFI_SCSI_OP_MODE_SEL6 0x15
#define EFI_SCSI_OP_MODE_SEL10 0x55
#define EFI_SCSI_OP_MODE_SEN6 0x1a
#define EFI_SCSI_OP_MODE_SEN10 0x5a
#define EFI_SCSI_OP_READ_BUFFER 0x3c
#define EFI_SCSI_OP_RECEIVE_DIAG 0x1c
#define EFI_SCSI_OP_REQUEST_SENSE 0x03
#define EFI_SCSI_OP_SEND_DIAG 0x1d
#define EFI_SCSI_OP_TEST_UNIT_READY 0x00
#define EFI_SCSI_OP_WRITE_BUFF 0x3b
//
// Additional commands for Direct Access Devices
//
#define EFI_SCSI_OP_FORMAT 0x04
#define EFI_SCSI_OP_LOCK_UN_CACHE 0x36
#define EFI_SCSI_OP_PREFETCH 0x34
#define EFI_SCSI_OP_MEDIA_REMOVAL 0x1e
#define EFI_SCSI_OP_READ6 0x08
#define EFI_SCSI_OP_READ10 0x28
#define EFI_SCSI_OP_READ16 0x88
#define EFI_SCSI_OP_READ_CAPACITY 0x25
#define EFI_SCSI_OP_READ_CAPACITY16 0x9e
#define EFI_SCSI_OP_READ_DEFECT 0x37
#define EFI_SCSI_OP_READ_LONG 0x3e
#define EFI_SCSI_OP_REASSIGN_BLK 0x07
#define EFI_SCSI_OP_RELEASE 0x17
#define EFI_SCSI_OP_REZERO 0x01
#define EFI_SCSI_OP_SEARCH_DATA_E 0x31
#define EFI_SCSI_OP_SEARCH_DATA_H 0x30
#define EFI_SCSI_OP_SEARCH_DATA_L 0x32
#define EFI_SCSI_OP_SEEK6 0x0b
#define EFI_SCSI_OP_SEEK10 0x2b
#define EFI_SCSI_OP_SEND_DIAG 0x1d
#define EFI_SCSI_OP_SET_LIMIT 0x33
#define EFI_SCSI_OP_START_STOP_UNIT 0x1b
#define EFI_SCSI_OP_SYNC_CACHE 0x35
#define EFI_SCSI_OP_VERIFY 0x2f
#define EFI_SCSI_OP_WRITE6 0x0a
#define EFI_SCSI_OP_WRITE10 0x2a
#define EFI_SCSI_OP_WRITE16 0x8a
#define EFI_SCSI_OP_WRITE_VERIFY 0x2e
#define EFI_SCSI_OP_WRITE_LONG 0x3f
#define EFI_SCSI_OP_WRITE_SAME 0x41
#define EFI_SCSI_OP_UNMAP 0x42
//
// Additional commands for Sequential Access Devices
//
#define EFI_SCSI_OP_ERASE 0x19
#define EFI_SCSI_OP_LOAD_UNLOAD 0x1b
#define EFI_SCSI_OP_LOCATE 0x2b
#define EFI_SCSI_OP_READ_BLOCK_LIMIT 0x05
#define EFI_SCSI_OP_READ_POS 0x34
#define EFI_SCSI_OP_READ_REVERSE 0x0f
#define EFI_SCSI_OP_RECOVER_BUF_DATA 0x14
#define EFI_SCSI_OP_RESERVE_UNIT 0x16
#define EFI_SCSI_OP_REWIND 0x01
#define EFI_SCSI_OP_SPACE 0x11
#define EFI_SCSI_OP_VERIFY_TAPE 0x13
#define EFI_SCSI_OP_WRITE_FILEMARK 0x10
//
// Additional commands for Printer Devices
//
#define EFI_SCSI_OP_PRINT 0x0a
#define EFI_SCSI_OP_SLEW_PRINT 0x0b
#define EFI_SCSI_OP_STOP_PRINT 0x1b
#define EFI_SCSI_OP_SYNC_BUFF 0x10
//
// Additional commands for Processor Devices
//
#define EFI_SCSI_OP_RECEIVE 0x08
#define EFI_SCSI_OP_SEND 0x0a
//
// Additional commands for Write-Once Devices
//
#define EFI_SCSI_OP_MEDIUM_SCAN 0x38
#define EFI_SCSI_OP_SEARCH_DAT_E10 0x31
#define EFI_SCSI_OP_SEARCH_DAT_E12 0xb1
#define EFI_SCSI_OP_SEARCH_DAT_H10 0x30
#define EFI_SCSI_OP_SEARCH_DAT_H12 0xb0
#define EFI_SCSI_OP_SEARCH_DAT_L10 0x32
#define EFI_SCSI_OP_SEARCH_DAT_L12 0xb2
#define EFI_SCSI_OP_SET_LIMIT10 0x33
#define EFI_SCSI_OP_SET_LIMIT12 0xb3
#define EFI_SCSI_OP_VERIFY10 0x2f
#define EFI_SCSI_OP_VERIFY12 0xaf
#define EFI_SCSI_OP_WRITE12 0xaa
#define EFI_SCSI_OP_WRITE_VERIFY10 0x2e
#define EFI_SCSI_OP_WRITE_VERIFY12 0xae
//
// Additional commands for CD-ROM Devices
//
#define EFI_SCSI_OP_PLAY_AUD_10 0x45
#define EFI_SCSI_OP_PLAY_AUD_12 0xa5
#define EFI_SCSI_OP_PLAY_AUD_MSF 0x47
#define EFI_SCSI_OP_PLAY_AUD_TKIN 0x48
#define EFI_SCSI_OP_PLAY_TK_REL10 0x49
#define EFI_SCSI_OP_PLAY_TK_REL12 0xa9
#define EFI_SCSI_OP_READ_CD_CAPACITY 0x25
#define EFI_SCSI_OP_READ_HEADER 0x44
#define EFI_SCSI_OP_READ_SUB_CHANNEL 0x42
#define EFI_SCSI_OP_READ_TOC 0x43
//
// Additional commands for Scanner Devices
//
#define EFI_SCSI_OP_GET_DATABUFF_STAT 0x34
#define EFI_SCSI_OP_GET_WINDOW 0x25
#define EFI_SCSI_OP_OBJECT_POS 0x31
#define EFI_SCSI_OP_SCAN 0x1b
#define EFI_SCSI_OP_SET_WINDOW 0x24
//
// Additional commands for Optical Memory Devices
//
#define EFI_SCSI_OP_UPDATE_BLOCK 0x3d
//
// Additional commands for Medium Changer Devices
//
#define EFI_SCSI_OP_EXCHANGE_MEDIUM 0xa6
#define EFI_SCSI_OP_INIT_ELEMENT_STAT 0x07
#define EFI_SCSI_OP_POS_TO_ELEMENT 0x2b
#define EFI_SCSI_OP_REQUEST_VE_ADDR 0xb5
#define EFI_SCSI_OP_SEND_VOL_TAG 0xb6
//
// Additional commands for Communition Devices
//
#define EFI_SCSI_OP_GET_MESSAGE6 0x08
#define EFI_SCSI_OP_GET_MESSAGE10 0x28
#define EFI_SCSI_OP_GET_MESSAGE12 0xa8
#define EFI_SCSI_OP_SEND_MESSAGE6 0x0a
#define EFI_SCSI_OP_SEND_MESSAGE10 0x2a
#define EFI_SCSI_OP_SEND_MESSAGE12 0xaa
//
// SCSI Data Transfer Direction
//
#define EFI_SCSI_DATA_IN 0
#define EFI_SCSI_DATA_OUT 1
//
// Peripheral Device Type Definitions
//
#define EFI_SCSI_TYPE_DISK 0x00 ///< Direct-access device (e.g. magnetic disk)
#define EFI_SCSI_TYPE_TAPE 0x01 ///< Sequential-access device (e.g. magnetic tape)
#define EFI_SCSI_TYPE_PRINTER 0x02 ///< Printer device
#define EFI_SCSI_TYPE_PROCESSOR 0x03 ///< Processor device
#define EFI_SCSI_TYPE_WORM 0x04 ///< Write-once device (e.g. some optical disks)
#define EFI_SCSI_TYPE_CDROM 0x05 ///< CD-ROM device
#define EFI_SCSI_TYPE_SCANNER 0x06 ///< Scanner device
#define EFI_SCSI_TYPE_OPTICAL 0x07 ///< Optical memory device (e.g. some optical disks)
#define EFI_SCSI_TYPE_MEDIUMCHANGER 0x08 ///< Medium changer device (e.g. jukeboxes)
#define EFI_SCSI_TYPE_COMMUNICATION 0x09 ///< Communications device
#define EFI_SCSI_TYPE_ASCIT8_1 0x0A ///< Defined by ASC IT8 (Graphic arts pre-press devices)
#define EFI_SCSI_TYPE_ASCIT8_2 0x0B ///< Defined by ASC IT8 (Graphic arts pre-press devices)
//
// 0Ch - 1Eh are reserved
//
#define EFI_SCSI_TYPE_UNKNOWN 0x1F ///< Unknown or no device type
//
// Page Codes for INQUIRY command
//
#define EFI_SCSI_PAGE_CODE_SUPPORTED_VPD 0x00
#define EFI_SCSI_PAGE_CODE_BLOCK_LIMITS_VPD 0xB0
#pragma pack(1)
///
/// Standard INQUIRY data format
///
typedef struct {
UINT8 Peripheral_Type : 5;
UINT8 Peripheral_Qualifier : 3;
UINT8 DeviceType_Modifier : 7;
UINT8 Rmb : 1;
UINT8 Version;
UINT8 Response_Data_Format;
UINT8 Addnl_Length;
UINT8 Reserved_5_95[95 - 5 + 1];
} EFI_SCSI_INQUIRY_DATA;
///
/// Supported VPD Pages VPD page
///
typedef struct {
UINT8 Peripheral_Type : 5;
UINT8 Peripheral_Qualifier : 3;
UINT8 PageCode;
UINT8 PageLength2;
UINT8 PageLength1;
UINT8 SupportedVpdPageList[0x100];
} EFI_SCSI_SUPPORTED_VPD_PAGES_VPD_PAGE;
///
/// Block Limits VPD page
///
typedef struct {
UINT8 Peripheral_Type : 5;
UINT8 Peripheral_Qualifier : 3;
UINT8 PageCode;
UINT8 PageLength2;
UINT8 PageLength1;
UINT8 WriteSameNonZero : 1;
UINT8 Reserved_4 : 7;
UINT8 MaximumCompareAndWriteLength;
UINT8 OptimalTransferLengthGranularity2;
UINT8 OptimalTransferLengthGranularity1;
UINT8 MaximumTransferLength4;
UINT8 MaximumTransferLength3;
UINT8 MaximumTransferLength2;
UINT8 MaximumTransferLength1;
UINT8 OptimalTransferLength4;
UINT8 OptimalTransferLength3;
UINT8 OptimalTransferLength2;
UINT8 OptimalTransferLength1;
UINT8 MaximumPrefetchXdreadXdwriteTransferLength4;
UINT8 MaximumPrefetchXdreadXdwriteTransferLength3;
UINT8 MaximumPrefetchXdreadXdwriteTransferLength2;
UINT8 MaximumPrefetchXdreadXdwriteTransferLength1;
UINT8 MaximumUnmapLbaCount4;
UINT8 MaximumUnmapLbaCount3;
UINT8 MaximumUnmapLbaCount2;
UINT8 MaximumUnmapLbaCount1;
UINT8 MaximumUnmapBlockDescriptorCount4;
UINT8 MaximumUnmapBlockDescriptorCount3;
UINT8 MaximumUnmapBlockDescriptorCount2;
UINT8 MaximumUnmapBlockDescriptorCount1;
UINT8 OptimalUnmapGranularity4;
UINT8 OptimalUnmapGranularity3;
UINT8 OptimalUnmapGranularity2;
UINT8 OptimalUnmapGranularity1;
UINT8 UnmapGranularityAlignment4 : 7;
UINT8 UnmapGranularityAlignmentValid : 1;
UINT8 UnmapGranularityAlignment3;
UINT8 UnmapGranularityAlignment2;
UINT8 UnmapGranularityAlignment1;
UINT8 MaximumWriteSameLength4;
UINT8 MaximumWriteSameLength3;
UINT8 MaximumWriteSameLength2;
UINT8 MaximumWriteSameLength1;
UINT8 MaximumAtomicTransferLength4;
UINT8 MaximumAtomicTransferLength3;
UINT8 MaximumAtomicTransferLength2;
UINT8 MaximumAtomicTransferLength1;
UINT8 AtomicAlignment4;
UINT8 AtomicAlignment3;
UINT8 AtomicAlignment2;
UINT8 AtomicAlignment1;
UINT8 AtomicTransferLengthGranularity4;
UINT8 AtomicTransferLengthGranularity3;
UINT8 AtomicTransferLengthGranularity2;
UINT8 AtomicTransferLengthGranularity1;
UINT8 MaximumAtomicTransferLengthWithAtomicBoundary4;
UINT8 MaximumAtomicTransferLengthWithAtomicBoundary3;
UINT8 MaximumAtomicTransferLengthWithAtomicBoundary2;
UINT8 MaximumAtomicTransferLengthWithAtomicBoundary1;
UINT8 MaximumAtomicBoundarySize4;
UINT8 MaximumAtomicBoundarySize3;
UINT8 MaximumAtomicBoundarySize2;
UINT8 MaximumAtomicBoundarySize1;
} EFI_SCSI_BLOCK_LIMITS_VPD_PAGE;
///
/// Error codes 70h and 71h sense data format
///
typedef struct {
UINT8 Error_Code : 7;
UINT8 Valid : 1;
UINT8 Segment_Number;
UINT8 Sense_Key : 4;
UINT8 Reserved_21 : 1;
UINT8 Ili : 1;
UINT8 Reserved_22 : 2;
UINT8 Information_3_6[4];
UINT8 Addnl_Sense_Length; ///< Additional sense length (n-7)
UINT8 Vendor_Specific_8_11[4];
UINT8 Addnl_Sense_Code; ///< Additional sense code
UINT8 Addnl_Sense_Code_Qualifier; ///< Additional sense code qualifier
UINT8 Field_Replaceable_Unit_Code; ///< Field replaceable unit code
UINT8 Reserved_15_17[3];
} EFI_SCSI_SENSE_DATA;
///
/// SCSI Disk READ CAPACITY Data
///
typedef struct {
UINT8 LastLba3;
UINT8 LastLba2;
UINT8 LastLba1;
UINT8 LastLba0;
UINT8 BlockSize3;
UINT8 BlockSize2;
UINT8 BlockSize1;
UINT8 BlockSize0;
} EFI_SCSI_DISK_CAPACITY_DATA;
typedef struct {
UINT8 LastLba7;
UINT8 LastLba6;
UINT8 LastLba5;
UINT8 LastLba4;
UINT8 LastLba3;
UINT8 LastLba2;
UINT8 LastLba1;
UINT8 LastLba0;
UINT8 BlockSize3;
UINT8 BlockSize2;
UINT8 BlockSize1;
UINT8 BlockSize0;
UINT8 Protection;
UINT8 LogicPerPhysical;
UINT8 LowestAlignLogic2;
UINT8 LowestAlignLogic1;
UINT8 Reserved[16];
} EFI_SCSI_DISK_CAPACITY_DATA16;
typedef struct {
UINT16 DataLen;
UINT16 BlkDespDataLen;
UINT8 Reserved[4];
} EFI_SCSI_DISK_UNMAP_PARAM_LIST_HEADER;
typedef struct {
UINT64 Lba;
UINT32 BlockNum;
UINT8 Reserved[4];
} EFI_SCSI_DISK_UNMAP_BLOCK_DESP;
#pragma pack()
//
// Sense Key
//
#define EFI_SCSI_SK_NO_SENSE (0x0)
#define EFI_SCSI_SK_RECOVERY_ERROR (0x1)
#define EFI_SCSI_SK_NOT_READY (0x2)
#define EFI_SCSI_SK_MEDIUM_ERROR (0x3)
#define EFI_SCSI_SK_HARDWARE_ERROR (0x4)
#define EFI_SCSI_SK_ILLEGAL_REQUEST (0x5)
#define EFI_SCSI_SK_UNIT_ATTENTION (0x6)
#define EFI_SCSI_SK_DATA_PROTECT (0x7)
#define EFI_SCSI_SK_BLANK_CHECK (0x8)
#define EFI_SCSI_SK_VENDOR_SPECIFIC (0x9)
#define EFI_SCSI_SK_RESERVED_A (0xA)
#define EFI_SCSI_SK_ABORT (0xB)
#define EFI_SCSI_SK_RESERVED_C (0xC)
#define EFI_SCSI_SK_OVERFLOW (0xD)
#define EFI_SCSI_SK_MISCOMPARE (0xE)
#define EFI_SCSI_SK_RESERVED_F (0xF)
//
// Additional Sense Codes and Sense Code Qualifiers.
// Only some frequently used additional sense codes and qualifiers are
// defined here. Please refer to SCSI standard for full value definition.
//
#define EFI_SCSI_ASC_NOT_READY (0x04)
#define EFI_SCSI_ASCQ_IN_PROGRESS (0x01)
#define EFI_SCSI_ASC_MEDIA_ERR1 (0x10)
#define EFI_SCSI_ASC_MEDIA_ERR2 (0x11)
#define EFI_SCSI_ASC_MEDIA_ERR3 (0x14)
#define EFI_SCSI_ASC_MEDIA_ERR4 (0x30)
#define EFI_SCSI_ASC_MEDIA_UPSIDE_DOWN (0x06)
#define EFI_SCSI_ASC_INVALID_CMD (0x20)
#define EFI_SCSI_ASC_LBA_OUT_OF_RANGE (0x21)
#define EFI_SCSI_ASC_INVALID_FIELD (0x24)
#define EFI_SCSI_ASC_WRITE_PROTECTED (0x27)
#define EFI_SCSI_ASC_MEDIA_CHANGE (0x28)
#define EFI_SCSI_ASC_RESET (0x29) ///< Power On Reset or Bus Reset occurred
#define EFI_SCSI_ASC_ILLEGAL_FIELD (0x26)
#define EFI_SCSI_ASC_NO_MEDIA (0x3A)
#define EFI_SCSI_ASC_ILLEGAL_MODE_FOR_THIS_TRACK (0x64)
#endif