audk/MdePkg/Include/Protocol/UgaDraw.h

189 lines
7.1 KiB
C

/** @file
UGA Draw protocol from the EFI 1.10 specification.
Abstraction of a very simple graphics device.
Copyright (c) 2006 - 2008, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __UGA_DRAW_H__
#define __UGA_DRAW_H__
#include <PiDxe.h>
#define EFI_UGA_DRAW_PROTOCOL_GUID \
{ \
0x982c298b, 0xf4fa, 0x41cb, {0xb8, 0x38, 0x77, 0xaa, 0x68, 0x8f, 0xb8, 0x39 } \
}
typedef struct _EFI_UGA_DRAW_PROTOCOL EFI_UGA_DRAW_PROTOCOL;
/**
Return the current video mode information.
@param This Protocol instance pointer.
@param HorizontalResolution Current video horizontal resolution in pixels
@param VerticalResolution Current video vertical resolution in pixels
@param ColorDepth Current video color depth in bits per pixel
@param RefreshRate Current video refresh rate in Hz.
@retval EFI_SUCCESS Mode information returned.
@retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
@retval EFI_INVALID_PARAMETER One of the input args was NULL.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_UGA_DRAW_PROTOCOL_GET_MODE)(
IN EFI_UGA_DRAW_PROTOCOL *This,
OUT UINT32 *HorizontalResolution,
OUT UINT32 *VerticalResolution,
OUT UINT32 *ColorDepth,
OUT UINT32 *RefreshRate
)
;
/**
Set the current video mode information.
@param This Protocol instance pointer.
@param HorizontalResolution Current video horizontal resolution in pixels
@param VerticalResolution Current video vertical resolution in pixels
@param ColorDepth Current video color depth in bits per pixel
@param RefreshRate Current video refresh rate in Hz.
@retval EFI_SUCCESS Mode information returned.
@retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
**/
typedef
EFI_STATUS
(EFIAPI *EFI_UGA_DRAW_PROTOCOL_SET_MODE)(
IN EFI_UGA_DRAW_PROTOCOL *This,
IN UINT32 HorizontalResolution,
IN UINT32 VerticalResolution,
IN UINT32 ColorDepth,
IN UINT32 RefreshRate
)
;
typedef struct {
UINT8 Blue;
UINT8 Green;
UINT8 Red;
UINT8 Reserved;
} EFI_UGA_PIXEL;
typedef union {
EFI_UGA_PIXEL Pixel;
UINT32 Raw;
} EFI_UGA_PIXEL_UNION;
typedef enum {
EfiUgaVideoFill,
EfiUgaVideoToBltBuffer,
EfiUgaBltBufferToVideo,
EfiUgaVideoToVideo,
EfiUgaBltMax
} EFI_UGA_BLT_OPERATION;
/**
Type specifying a pointer to a function to perform an UGA Blt operation.
The following table defines actions for BltOperations:
<B>EfiUgaVideoFill</B> - Write data from the BltBuffer pixel (SourceX, SourceY)
directly to every pixel of the video display rectangle
(DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
Only one pixel will be used from the BltBuffer. Delta is NOT used.
<B>EfiUgaVideoToBltBuffer</B> - Read data from the video display rectangle
(SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in
the BltBuffer rectangle (DestinationX, DestinationY )
(DestinationX + Width, DestinationY + Height). If DestinationX or
DestinationY is not zero then Delta must be set to the length in bytes
of a row in the BltBuffer.
<B>EfiUgaBltBufferToVideo</B> - Write data from the BltBuffer rectangle
(SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the
video display rectangle (DestinationX, DestinationY)
(DestinationX + Width, DestinationY + Height). If SourceX or SourceY is
not zero then Delta must be set to the length in bytes of a row in the
BltBuffer.
<B>EfiUgaVideoToVideo</B> - Copy from the video display rectangle (SourceX, SourceY)
(SourceX + Width, SourceY + Height) .to the video display rectangle
(DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
The BltBuffer and Delta are not used in this mode.
@param[in] This - Protocol instance pointer.
@param[in] BltBuffer - Buffer containing data to blit into video buffer. This
buffer has a size of Width*Height*sizeof(EFI_UGA_PIXEL)
@param[in] BltOperation - Operation to perform on BlitBuffer and video memory
@param[in] SourceX - X coordinate of source for the BltBuffer.
@param[in] SourceY - Y coordinate of source for the BltBuffer.
@param[in] DestinationX - X coordinate of destination for the BltBuffer.
@param[in] DestinationY - Y coordinate of destination for the BltBuffer.
@param[in] Width - Width of rectangle in BltBuffer in pixels.
@param[in] Height - Hight of rectangle in BltBuffer in pixels.
@param[in] Delta - OPTIONAL
@retval EFI_SUCCESS - The Blt operation completed.
@retval EFI_INVALID_PARAMETER - BltOperation is not valid.
@retval EFI_DEVICE_ERROR - A hardware error occured writting to the video buffer.
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_UGA_DRAW_PROTOCOL_BLT)(
IN EFI_UGA_DRAW_PROTOCOL * This,
IN EFI_UGA_PIXEL * BltBuffer, OPTIONAL
IN EFI_UGA_BLT_OPERATION BltOperation,
IN UINTN SourceX,
IN UINTN SourceY,
IN UINTN DestinationX,
IN UINTN DestinationY,
IN UINTN Width,
IN UINTN Height,
IN UINTN Delta OPTIONAL
);
/**
This protocol provides a basic abstraction to set video modes and
copy pixels to and from the graphics controller's frame buffer.
@par Protocol Description:
The EFI_UGA_DRAW_PROTOCOL provides a software abstraction to allow pixels to be drawn
directly to the frame buffer. The EFI_UGA_DRAW_PROTOCOL is designed to be lightweight and
to support the basic needs of graphics output prior to Operating System boot.
@param GetMode
Returns information about the geometry and configuration of the
graphics controller's current frame buffer configuration.
@param SetMode
Set the graphics device into a given mode and clears the frame buffer to black.
@param Blt
Software abstraction to draw on the video device's frame buffer.
**/
struct _EFI_UGA_DRAW_PROTOCOL {
EFI_UGA_DRAW_PROTOCOL_GET_MODE GetMode;
EFI_UGA_DRAW_PROTOCOL_SET_MODE SetMode;
EFI_UGA_DRAW_PROTOCOL_BLT Blt;
};
extern EFI_GUID gEfiUgaDrawProtocolGuid;
#endif