audk/SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2Ptp.c

538 lines
17 KiB
C

/** @file
PTP (Platform TPM Profile) CRB (Command Response Buffer) interface used by dTPM2.0 library.
Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <IndustryStandard/Tpm20.h>
#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/IoLib.h>
#include <Library/TimerLib.h>
#include <Library/DebugLib.h>
#include <Library/Tpm2DeviceLib.h>
#include <Library/PcdLib.h>
#include <IndustryStandard/TpmPtp.h>
#include <IndustryStandard/TpmTis.h>
typedef enum {
PtpInterfaceTis,
PtpInterfaceFifo,
PtpInterfaceCrb,
PtpInterfaceMax,
} PTP_INTERFACE_TYPE;
//
// Execution of the command may take from several seconds to minutes for certain
// commands, such as key generation.
//
#define PTP_TIMEOUT_MAX (90000 * 1000) // 90s
//
// Max TPM command/reponse length
//
#define TPMCMDBUFLENGTH 0x500
/**
Check whether TPM PTP register exist.
@param[in] Reg Pointer to PTP register.
@retval TRUE TPM PTP exists.
@retval FALSE TPM PTP is not found.
**/
BOOLEAN
IsPtpPresence (
IN VOID *Reg
)
{
UINT8 RegRead;
RegRead = MmioRead8 ((UINTN)Reg);
if (RegRead == 0xFF) {
//
// No TPM chip
//
return FALSE;
}
return TRUE;
}
/**
Check whether the value of a TPM chip register satisfies the input BIT setting.
@param[in] Register Address port of register to be checked.
@param[in] BitSet Check these data bits are set.
@param[in] BitClear Check these data bits are clear.
@param[in] TimeOut The max wait time (unit MicroSecond) when checking register.
@retval EFI_SUCCESS The register satisfies the check bit.
@retval EFI_TIMEOUT The register can't run into the expected status in time.
**/
EFI_STATUS
PtpCrbWaitRegisterBits (
IN UINT32 *Register,
IN UINT32 BitSet,
IN UINT32 BitClear,
IN UINT32 TimeOut
)
{
UINT32 RegRead;
UINT32 WaitTime;
for (WaitTime = 0; WaitTime < TimeOut; WaitTime += 30){
RegRead = MmioRead32 ((UINTN)Register);
if ((RegRead & BitSet) == BitSet && (RegRead & BitClear) == 0) {
return EFI_SUCCESS;
}
MicroSecondDelay (30);
}
return EFI_TIMEOUT;
}
/**
Get the control of TPM chip.
@param[in] CrbReg Pointer to CRB register.
@retval EFI_SUCCESS Get the control of TPM chip.
@retval EFI_INVALID_PARAMETER CrbReg is NULL.
@retval EFI_NOT_FOUND TPM chip doesn't exit.
@retval EFI_TIMEOUT Can't get the TPM control in time.
**/
EFI_STATUS
PtpCrbRequestUseTpm (
IN PTP_CRB_REGISTERS_PTR CrbReg
)
{
EFI_STATUS Status;
if (!IsPtpPresence (CrbReg)) {
return EFI_NOT_FOUND;
}
MmioWrite32((UINTN)&CrbReg->LocalityControl, PTP_CRB_LOCALITY_CONTROL_REQUEST_ACCESS);
Status = PtpCrbWaitRegisterBits (
&CrbReg->LocalityStatus,
PTP_CRB_LOCALITY_STATUS_GRANTED,
0,
PTP_TIMEOUT_A
);
return Status;
}
/**
Send a command to TPM for execution and return response data.
@param[in] CrbReg TPM register space base address.
@param[in] BufferIn Buffer for command data.
@param[in] SizeIn Size of command data.
@param[in, out] BufferOut Buffer for response data.
@param[in, out] SizeOut Size of response data.
@retval EFI_SUCCESS Operation completed successfully.
@retval EFI_BUFFER_TOO_SMALL Response data buffer is too small.
@retval EFI_DEVICE_ERROR Unexpected device behavior.
@retval EFI_UNSUPPORTED Unsupported TPM version
**/
EFI_STATUS
PtpCrbTpmCommand (
IN PTP_CRB_REGISTERS_PTR CrbReg,
IN UINT8 *BufferIn,
IN UINT32 SizeIn,
IN OUT UINT8 *BufferOut,
IN OUT UINT32 *SizeOut
)
{
EFI_STATUS Status;
UINT32 Index;
UINT32 TpmOutSize;
UINT16 Data16;
UINT32 Data32;
DEBUG_CODE (
UINTN DebugSize;
DEBUG ((EFI_D_VERBOSE, "PtpCrbTpmCommand Send - "));
if (SizeIn > 0x100) {
DebugSize = 0x40;
} else {
DebugSize = SizeIn;
}
for (Index = 0; Index < DebugSize; Index++) {
DEBUG ((EFI_D_VERBOSE, "%02x ", BufferIn[Index]));
}
if (DebugSize != SizeIn) {
DEBUG ((EFI_D_VERBOSE, "...... "));
for (Index = SizeIn - 0x20; Index < SizeIn; Index++) {
DEBUG ((EFI_D_VERBOSE, "%02x ", BufferIn[Index]));
}
}
DEBUG ((EFI_D_VERBOSE, "\n"));
);
TpmOutSize = 0;
//
// STEP 0:
// Ready is any time the TPM is ready to receive a command, following a write
// of 1 by software to Request.cmdReady, as indicated by the Status field
// being cleared to 0.
//
MmioWrite32((UINTN)&CrbReg->CrbControlRequest, PTP_CRB_CONTROL_AREA_REQUEST_COMMAND_READY);
Status = PtpCrbWaitRegisterBits (
&CrbReg->CrbControlRequest,
0,
PTP_CRB_CONTROL_AREA_REQUEST_COMMAND_READY,
PTP_TIMEOUT_C
);
if (EFI_ERROR (Status)) {
Status = EFI_DEVICE_ERROR;
goto Exit;
}
Status = PtpCrbWaitRegisterBits (
&CrbReg->CrbControlStatus,
0,
PTP_CRB_CONTROL_AREA_STATUS_TPM_IDLE,
PTP_TIMEOUT_C
);
if (EFI_ERROR (Status)) {
Status = EFI_DEVICE_ERROR;
goto Exit;
}
//
// STEP 1:
// Command Reception occurs following a Ready state between the write of the
// first byte of a command to the Command Buffer and the receipt of a write
// of 1 to Start.
//
for (Index = 0; Index < SizeIn; Index++) {
MmioWrite8 ((UINTN)&CrbReg->CrbDataBuffer[Index], BufferIn[Index]);
}
MmioWrite32 ((UINTN)&CrbReg->CrbControlCommandAddressHigh, (UINT32)RShiftU64 ((UINTN)CrbReg->CrbDataBuffer, 32));
MmioWrite32 ((UINTN)&CrbReg->CrbControlCommandAddressLow, (UINT32)(UINTN)CrbReg->CrbDataBuffer);
MmioWrite32 ((UINTN)&CrbReg->CrbControlCommandSize, sizeof(CrbReg->CrbDataBuffer));
MmioWrite64 ((UINTN)&CrbReg->CrbControlResponseAddrss, (UINT32)(UINTN)CrbReg->CrbDataBuffer);
MmioWrite32 ((UINTN)&CrbReg->CrbControlResponseSize, sizeof(CrbReg->CrbDataBuffer));
//
// STEP 2:
// Command Execution occurs after receipt of a 1 to Start and the TPM
// clearing Start to 0.
//
MmioWrite32((UINTN)&CrbReg->CrbControlStart, PTP_CRB_CONTROL_START);
Status = PtpCrbWaitRegisterBits (
&CrbReg->CrbControlStart,
0,
PTP_CRB_CONTROL_START,
PTP_TIMEOUT_MAX
);
if (EFI_ERROR (Status)) {
Status = EFI_DEVICE_ERROR;
goto Exit;
}
//
// STEP 3:
// Command Completion occurs after completion of a command (indicated by the
// TPM clearing TPM_CRB_CTRL_Start_x to 0) and before a write of a 1 by the
// software to Request.goIdle.
//
//
// Get response data header
//
for (Index = 0; Index < sizeof (TPM2_RESPONSE_HEADER); Index++) {
BufferOut[Index] = MmioRead8 ((UINTN)&CrbReg->CrbDataBuffer[Index]);
}
DEBUG_CODE (
DEBUG ((EFI_D_VERBOSE, "PtpCrbTpmCommand ReceiveHeader - "));
for (Index = 0; Index < sizeof (TPM2_RESPONSE_HEADER); Index++) {
DEBUG ((EFI_D_VERBOSE, "%02x ", BufferOut[Index]));
}
DEBUG ((EFI_D_VERBOSE, "\n"));
);
//
// Check the reponse data header (tag, parasize and returncode)
//
CopyMem (&Data16, BufferOut, sizeof (UINT16));
// TPM2 should not use this RSP_COMMAND
if (SwapBytes16 (Data16) == TPM_ST_RSP_COMMAND) {
DEBUG ((EFI_D_ERROR, "TPM2: TPM_ST_RSP error - %x\n", TPM_ST_RSP_COMMAND));
Status = EFI_UNSUPPORTED;
goto Exit;
}
CopyMem (&Data32, (BufferOut + 2), sizeof (UINT32));
TpmOutSize = SwapBytes32 (Data32);
if (*SizeOut < TpmOutSize) {
Status = EFI_BUFFER_TOO_SMALL;
goto Exit;
}
*SizeOut = TpmOutSize;
//
// Continue reading the remaining data
//
for (Index = sizeof (TPM2_RESPONSE_HEADER); Index < TpmOutSize; Index++) {
BufferOut[Index] = MmioRead8 ((UINTN)&CrbReg->CrbDataBuffer[Index]);
}
Exit:
DEBUG_CODE (
DEBUG ((EFI_D_VERBOSE, "PtpCrbTpmCommand Receive - "));
for (Index = 0; Index < TpmOutSize; Index++) {
DEBUG ((EFI_D_VERBOSE, "%02x ", BufferOut[Index]));
}
DEBUG ((EFI_D_VERBOSE, "\n"));
);
//
// STEP 4:
// Idle is any time TPM_CRB_CTRL_STS_x.Status.goIdle is 1.
//
MmioWrite32((UINTN)&CrbReg->CrbControlRequest, PTP_CRB_CONTROL_AREA_REQUEST_GO_IDLE);
return Status;
}
/**
Send a command to TPM for execution and return response data.
@param[in] TisReg TPM register space base address.
@param[in] BufferIn Buffer for command data.
@param[in] SizeIn Size of command data.
@param[in, out] BufferOut Buffer for response data.
@param[in, out] SizeOut Size of response data.
@retval EFI_SUCCESS Operation completed successfully.
@retval EFI_BUFFER_TOO_SMALL Response data buffer is too small.
@retval EFI_DEVICE_ERROR Unexpected device behavior.
@retval EFI_UNSUPPORTED Unsupported TPM version
**/
EFI_STATUS
Tpm2TisTpmCommand (
IN TIS_PC_REGISTERS_PTR TisReg,
IN UINT8 *BufferIn,
IN UINT32 SizeIn,
IN OUT UINT8 *BufferOut,
IN OUT UINT32 *SizeOut
);
/**
Get the control of TPM chip by sending requestUse command TIS_PC_ACC_RQUUSE
to ACCESS Register in the time of default TIS_TIMEOUT_A.
@param[in] TisReg Pointer to TIS register.
@retval EFI_SUCCESS Get the control of TPM chip.
@retval EFI_INVALID_PARAMETER TisReg is NULL.
@retval EFI_NOT_FOUND TPM chip doesn't exit.
@retval EFI_TIMEOUT Can't get the TPM control in time.
**/
EFI_STATUS
TisPcRequestUseTpm (
IN TIS_PC_REGISTERS_PTR TisReg
);
/**
Return PTP interface type.
@param[in] Register Pointer to PTP register.
@return PTP interface type.
**/
PTP_INTERFACE_TYPE
GetPtpInterface (
IN VOID *Register
)
{
PTP_CRB_INTERFACE_IDENTIFIER InterfaceId;
PTP_FIFO_INTERFACE_CAPABILITY InterfaceCapability;
if (!IsPtpPresence (Register)) {
return PtpInterfaceMax;
}
//
// Check interface id
//
InterfaceId.Uint32 = MmioRead32 ((UINTN)&((PTP_CRB_REGISTERS *)Register)->InterfaceId);
InterfaceCapability.Uint32 = MmioRead32 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->InterfaceCapability);
if ((InterfaceId.Bits.InterfaceType == PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_CRB) &&
(InterfaceId.Bits.InterfaceVersion == PTP_INTERFACE_IDENTIFIER_INTERFACE_VERSION_CRB) &&
(InterfaceId.Bits.CapCRB != 0)) {
return PtpInterfaceCrb;
}
if ((InterfaceId.Bits.InterfaceType == PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_FIFO) &&
(InterfaceId.Bits.InterfaceVersion == PTP_INTERFACE_IDENTIFIER_INTERFACE_VERSION_FIFO) &&
(InterfaceId.Bits.CapFIFO != 0) &&
(InterfaceCapability.Bits.InterfaceVersion == INTERFACE_CAPABILITY_INTERFACE_VERSION_PTP)) {
return PtpInterfaceFifo;
}
return PtpInterfaceTis;
}
/**
Dump PTP register information.
@param[in] Register Pointer to PTP register.
**/
VOID
DumpPtpInfo (
IN VOID *Register
)
{
PTP_CRB_INTERFACE_IDENTIFIER InterfaceId;
PTP_FIFO_INTERFACE_CAPABILITY InterfaceCapability;
UINT8 StatusEx;
UINT16 Vid;
UINT16 Did;
UINT8 Rid;
PTP_INTERFACE_TYPE PtpInterface;
if (!IsPtpPresence (Register)) {
return ;
}
InterfaceId.Uint32 = MmioRead32 ((UINTN)&((PTP_CRB_REGISTERS *)Register)->InterfaceId);
InterfaceCapability.Uint32 = MmioRead32 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->InterfaceCapability);
StatusEx = MmioRead8 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->StatusEx);
//
// Dump InterfaceId Register for PTP
//
DEBUG ((EFI_D_INFO, "InterfaceId - 0x%08x\n", InterfaceId.Uint32));
DEBUG ((EFI_D_INFO, " InterfaceType - 0x%02x\n", InterfaceId.Bits.InterfaceType));
if (InterfaceId.Bits.InterfaceType != PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_TIS) {
DEBUG ((EFI_D_INFO, " InterfaceVersion - 0x%02x\n", InterfaceId.Bits.InterfaceVersion));
DEBUG ((EFI_D_INFO, " CapFIFO - 0x%x\n", InterfaceId.Bits.CapFIFO));
DEBUG ((EFI_D_INFO, " CapCRB - 0x%x\n", InterfaceId.Bits.CapCRB));
}
//
// Dump Capability Register for TIS and FIFO
//
DEBUG ((EFI_D_INFO, "InterfaceCapability - 0x%08x\n", InterfaceCapability.Uint32));
if ((InterfaceId.Bits.InterfaceType == PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_TIS) ||
(InterfaceId.Bits.InterfaceType == PTP_INTERFACE_IDENTIFIER_INTERFACE_TYPE_FIFO)) {
DEBUG ((EFI_D_INFO, " InterfaceVersion - 0x%x\n", InterfaceCapability.Bits.InterfaceVersion));
}
//
// Dump StatusEx Register for PTP FIFO
//
DEBUG ((EFI_D_INFO, "StatusEx - 0x%02x\n", StatusEx));
if (InterfaceCapability.Bits.InterfaceVersion == INTERFACE_CAPABILITY_INTERFACE_VERSION_PTP) {
DEBUG ((EFI_D_INFO, " TpmFamily - 0x%x\n", (StatusEx & PTP_FIFO_STS_EX_TPM_FAMILY) >> PTP_FIFO_STS_EX_TPM_FAMILY_OFFSET));
}
Vid = 0xFFFF;
Did = 0xFFFF;
Rid = 0xFF;
PtpInterface = GetPtpInterface (Register);
DEBUG ((EFI_D_INFO, "PtpInterface - %x\n", PtpInterface));
switch (PtpInterface) {
case PtpInterfaceCrb:
Vid = MmioRead16 ((UINTN)&((PTP_CRB_REGISTERS *)Register)->Vid);
Did = MmioRead16 ((UINTN)&((PTP_CRB_REGISTERS *)Register)->Did);
Rid = (UINT8)InterfaceId.Bits.Rid;
break;
case PtpInterfaceFifo:
case PtpInterfaceTis:
Vid = MmioRead16 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->Vid);
Did = MmioRead16 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->Did);
Rid = MmioRead8 ((UINTN)&((PTP_FIFO_REGISTERS *)Register)->Rid);
break;
default:
break;
}
DEBUG ((EFI_D_INFO, "VID - 0x%04x\n", Vid));
DEBUG ((EFI_D_INFO, "DID - 0x%04x\n", Did));
DEBUG ((EFI_D_INFO, "RID - 0x%02x\n", Rid));
}
/**
This service enables the sending of commands to the TPM2.
@param[in] InputParameterBlockSize Size of the TPM2 input parameter block.
@param[in] InputParameterBlock Pointer to the TPM2 input parameter block.
@param[in,out] OutputParameterBlockSize Size of the TPM2 output parameter block.
@param[in] OutputParameterBlock Pointer to the TPM2 output parameter block.
@retval EFI_SUCCESS The command byte stream was successfully sent to the device and a response was successfully received.
@retval EFI_DEVICE_ERROR The command was not successfully sent to the device or a response was not successfully received from the device.
@retval EFI_BUFFER_TOO_SMALL The output parameter block is too small.
**/
EFI_STATUS
EFIAPI
DTpm2SubmitCommand (
IN UINT32 InputParameterBlockSize,
IN UINT8 *InputParameterBlock,
IN OUT UINT32 *OutputParameterBlockSize,
IN UINT8 *OutputParameterBlock
)
{
PTP_INTERFACE_TYPE PtpInterface;
PtpInterface = GetPtpInterface ((VOID *) (UINTN) PcdGet64 (PcdTpmBaseAddress));
switch (PtpInterface) {
case PtpInterfaceCrb:
return PtpCrbTpmCommand (
(PTP_CRB_REGISTERS_PTR) (UINTN) PcdGet64 (PcdTpmBaseAddress),
InputParameterBlock,
InputParameterBlockSize,
OutputParameterBlock,
OutputParameterBlockSize
);
case PtpInterfaceFifo:
case PtpInterfaceTis:
return Tpm2TisTpmCommand (
(TIS_PC_REGISTERS_PTR) (UINTN) PcdGet64 (PcdTpmBaseAddress),
InputParameterBlock,
InputParameterBlockSize,
OutputParameterBlock,
OutputParameterBlockSize
);
default:
return EFI_NOT_FOUND;
}
}
/**
This service requests use TPM2.
@retval EFI_SUCCESS Get the control of TPM2 chip.
@retval EFI_NOT_FOUND TPM2 not found.
@retval EFI_DEVICE_ERROR Unexpected device behavior.
**/
EFI_STATUS
EFIAPI
DTpm2RequestUseTpm (
VOID
)
{
PTP_INTERFACE_TYPE PtpInterface;
PtpInterface = GetPtpInterface ((VOID *) (UINTN) PcdGet64 (PcdTpmBaseAddress));
switch (PtpInterface) {
case PtpInterfaceCrb:
return PtpCrbRequestUseTpm ((PTP_CRB_REGISTERS_PTR) (UINTN) PcdGet64 (PcdTpmBaseAddress));
case PtpInterfaceFifo:
case PtpInterfaceTis:
return TisPcRequestUseTpm ((TIS_PC_REGISTERS_PTR) (UINTN) PcdGet64 (PcdTpmBaseAddress));
default:
return EFI_NOT_FOUND;
}
}