audk/PerformancePkg/Library/TscTimerLib/TscTimerLib.c

244 lines
7.9 KiB
C

/** @file
A Timer Library implementation which uses the Time Stamp Counter in the processor.
For Pentium 4 processors, Intel Xeon processors (family [0FH], models [03H and higher]);
for Intel Core Solo and Intel Core Duo processors (family [06H], model [0EH]);
for the Intel Xeon processor 5100 series and Intel Core 2 Duo processors (family [06H], model [0FH]);
for Intel Core 2 and Intel Xeon processors (family [06H], display_model [17H]);
for Intel Atom processors (family [06H], display_model [1CH]):
the time-stamp counter increments at a constant rate.
That rate may be set by the maximum core-clock to bus-clock ratio of the processor or may be set by
the maximum resolved frequency at which the processor is booted. The maximum resolved frequency may
differ from the maximum qualified frequency of the processor.
The specific processor configuration determines the behavior. Constant TSC behavior ensures that the
duration of each clock tick is uniform and supports the use of the TSC as a wall clock timer even if
the processor core changes frequency. This is the architectural behavior moving forward.
A Processor's support for invariant TSC is indicated by CPUID.0x80000007.EDX[8].
Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <Base.h>
#include <Ich/GenericIch.h>
#include <Library/TimerLib.h>
#include <Library/BaseLib.h>
#include <Library/IoLib.h>
#include <Library/PciLib.h>
#include <Library/PcdLib.h>
STATIC UINT64 mTscFrequency;
#ifndef R_ICH_ACPI_PM1_TMR
#define R_ICH_ACPI_PM1_TMR R_ACPI_PM1_TMR
#endif
/** The constructor function determines the actual TSC frequency.
The TSC counting frequency is determined by comparing how far it counts
during a 1ms period as determined by the ACPI timer. The ACPI timer is
used because it counts at a known frequency.
If ACPI I/O space not enabled, this function will enable it. Then the
TSC is sampled, followed by waiting for 3579 clocks of the ACPI timer, or 1ms.
The TSC is then sampled again. The difference multiplied by 1000 is the TSC
frequency. There will be a small error because of the overhead of reading
the ACPI timer. An attempt is made to determine and compensate for this error.
This function will always return RETURN_SUCCESS.
@retval RETURN_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
TscTimerLibConstructor (
VOID
)
{
UINT64 StartTSC;
UINT64 EndTSC;
UINT32 TimerAddr;
UINT32 Ticks;
//
// If ACPI I/O space is not enabled yet, program ACPI I/O base address and enable it.
//
if ((PciRead8 (PCI_ICH_LPC_ADDRESS (R_ICH_LPC_ACPI_CNT)) & B_ICH_LPC_ACPI_CNT_ACPI_EN) == 0) {
PciWrite16 (PCI_ICH_LPC_ADDRESS (R_ICH_LPC_ACPI_BASE), PcdGet16 (PcdPerfPkgAcpiIoPortBaseAddress));
PciOr8 (PCI_ICH_LPC_ADDRESS (R_ICH_LPC_ACPI_CNT), B_ICH_LPC_ACPI_CNT_ACPI_EN);
}
TimerAddr = PcdGet16 (PcdPerfPkgAcpiIoPortBaseAddress) + R_ACPI_PM1_TMR; // Locate the ACPI Timer
Ticks = IoRead32( TimerAddr) + (3579); // Set Ticks to 1ms in the future
StartTSC = AsmReadTsc(); // Get base value for the TSC
//
// Wait until the ACPI timer has counted 1ms.
// Timer wrap-arounds are handled correctly by this function.
// When the current ACPI timer value is greater than 'Ticks', the while loop will exit.
//
while (((Ticks - IoRead32( TimerAddr)) & BIT23) == 0) {
CpuPause();
}
EndTSC = AsmReadTsc(); // TSC value 1ms later
mTscFrequency = MultU64x32 (
(EndTSC - StartTSC), // Number of TSC counts in 1ms
1000 // Number of ms in a second
);
//
// mTscFrequency is now equal to the number of TSC counts per second
//
return RETURN_SUCCESS;
}
/** Stalls the CPU for at least the given number of ticks.
Stalls the CPU for at least the given number of ticks. It's invoked by
MicroSecondDelay() and NanoSecondDelay().
@param[in] Delay A period of time to delay in ticks.
**/
STATIC
VOID
InternalX86Delay (
IN UINT64 Delay
)
{
UINT64 Ticks;
//
// The target timer count is calculated here
//
Ticks = AsmReadTsc() + Delay;
//
// Wait until time out
// Timer wrap-arounds are NOT handled correctly by this function.
// Thus, this function must be called within 10 years of reset since
// Intel guarantees a minimum of 10 years before the TSC wraps.
//
while (AsmReadTsc() <= Ticks) CpuPause();
}
/** Stalls the CPU for at least the specified number of MicroSeconds.
@param[in] MicroSeconds The minimum number of microseconds to delay.
@return The value of MicroSeconds input.
**/
UINTN
EFIAPI
MicroSecondDelay (
IN UINTN MicroSeconds
)
{
InternalX86Delay (
DivU64x32 (
MultU64x64 (
mTscFrequency,
MicroSeconds
),
1000000u
)
);
return MicroSeconds;
}
/** Stalls the CPU for at least the specified number of NanoSeconds.
@param[in] NanoSeconds The minimum number of nanoseconds to delay.
@return The value of NanoSeconds input.
**/
UINTN
EFIAPI
NanoSecondDelay (
IN UINTN NanoSeconds
)
{
InternalX86Delay (
DivU64x32 (
MultU64x32 (
mTscFrequency,
(UINT32)NanoSeconds
),
1000000000u
)
);
return NanoSeconds;
}
/** Retrieves the current value of the 64-bit free running Time-Stamp counter.
The time-stamp counter (as implemented in the P6 family, Pentium, Pentium M,
Pentium 4, Intel Xeon, Intel Core Solo and Intel Core Duo processors and
later processors) is a 64-bit counter that is set to 0 following a RESET of
the processor. Following a RESET, the counter increments even when the
processor is halted by the HLT instruction or the external STPCLK# pin. Note
that the assertion of the external DPSLP# pin may cause the time-stamp
counter to stop.
The properties of the counter can be retrieved by the
GetPerformanceCounterProperties() function.
@return The current value of the free running performance counter.
**/
UINT64
EFIAPI
GetPerformanceCounter (
VOID
)
{
return AsmReadTsc();
}
/** Retrieves the 64-bit frequency in Hz and the range of performance counter
values.
If StartValue is not NULL, then the value that the performance counter starts
with, 0x0, is returned in StartValue. If EndValue is not NULL, then the value
that the performance counter end with, 0xFFFFFFFFFFFFFFFF, is returned in
EndValue.
The 64-bit frequency of the performance counter, in Hz, is always returned.
To determine average processor clock frequency, Intel recommends the use of
EMON logic to count processor core clocks over the period of time for which
the average is required.
@param[out] StartValue Pointer to where the performance counter's starting value is saved, or NULL.
@param[out] EndValue Pointer to where the performance counter's ending value is saved, or NULL.
@return The frequency in Hz.
**/
UINT64
EFIAPI
GetPerformanceCounterProperties (
OUT UINT64 *StartValue, OPTIONAL
OUT UINT64 *EndValue OPTIONAL
)
{
if (StartValue != NULL) {
*StartValue = 0;
}
if (EndValue != NULL) {
*EndValue = 0xFFFFFFFFFFFFFFFFull;
}
return mTscFrequency;
}