tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h

841 lines
40 KiB
C
Raw Blame History

/** @file
Copyright (c) 2014 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _UFS_PASS_THRU_H_
#define _UFS_PASS_THRU_H_
#include <Uefi.h>
#include <Protocol/ScsiPassThruExt.h>
#include <Protocol/UfsHostController.h>
#include <Library/DebugLib.h>
#include <Library/UefiDriverEntryPoint.h>
#include <Library/BaseLib.h>
#include <Library/UefiLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/DevicePathLib.h>
#include <Library/TimerLib.h>
#include "UfsPassThruHci.h"
#define UFS_PASS_THRU_SIG SIGNATURE_32 ('U', 'F', 'S', 'P')
//
// Lun 0~7 is for 8 common luns.
// Lun 8~11 is for those 4 well known luns (Refer to UFS 2.0 spec Table 10.58 for details):
// Lun 8: REPORT LUNS
// Lun 9: UFS DEVICE
// Lun 10: BOOT
// Lun 11: RPMB
//
#define UFS_MAX_LUNS 12
#define UFS_WLUN_PREFIX 0xC1
typedef struct {
UINT8 Lun[UFS_MAX_LUNS];
UINT16 BitMask:12; // Bit 0~7 is 1/1 mapping to common luns. Bit 8~11 is 1/1 mapping to well-known luns.
UINT16 Rsvd:4;
} UFS_EXPOSED_LUNS;
//
// Iterate through the double linked list. This is delete-safe.
// Do not touch NextEntry
//
#define EFI_LIST_FOR_EACH_SAFE(Entry, NextEntry, ListHead) \
for(Entry = (ListHead)->ForwardLink, NextEntry = Entry->ForwardLink;\
Entry != (ListHead); Entry = NextEntry, NextEntry = Entry->ForwardLink)
typedef struct _UFS_PASS_THRU_PRIVATE_DATA {
UINT32 Signature;
EFI_HANDLE Handle;
EFI_EXT_SCSI_PASS_THRU_MODE ExtScsiPassThruMode;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL ExtScsiPassThru;
EDKII_UFS_HOST_CONTROLLER_PROTOCOL *UfsHostController;
UINTN UfsHcBase;
UINT32 Capabilities;
UINT8 TaskTag;
VOID *UtpTrlBase;
UINT8 Nutrs;
VOID *TrlMapping;
VOID *UtpTmrlBase;
UINT8 Nutmrs;
VOID *TmrlMapping;
UFS_EXPOSED_LUNS Luns;
//
// For Non-blocking operation.
//
EFI_EVENT TimerEvent;
LIST_ENTRY Queue;
} UFS_PASS_THRU_PRIVATE_DATA;
#define UFS_PASS_THRU_TRANS_REQ_SIG SIGNATURE_32 ('U', 'F', 'S', 'T')
typedef struct {
UINT32 Signature;
LIST_ENTRY TransferList;
UINT8 Slot;
UTP_TRD *Trd;
UINT32 CmdDescSize;
VOID *CmdDescHost;
VOID *CmdDescMapping;
VOID *DataBufMapping;
EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet;
UINT64 TimeoutRemain;
EFI_EVENT CallerEvent;
} UFS_PASS_THRU_TRANS_REQ;
#define UFS_PASS_THRU_TRANS_REQ_FROM_THIS(a) \
CR(a, UFS_PASS_THRU_TRANS_REQ, TransferList, UFS_PASS_THRU_TRANS_REQ_SIG)
#define UFS_TIMEOUT EFI_TIMER_PERIOD_SECONDS(3)
#define UFS_HC_ASYNC_TIMER EFI_TIMER_PERIOD_MILLISECONDS(1)
#define ROUNDUP8(x) (((x) % 8 == 0) ? (x) : ((x) / 8 + 1) * 8)
#define IS_ALIGNED(addr, size) (((UINTN) (addr) & (size - 1)) == 0)
#define UFS_PASS_THRU_PRIVATE_DATA_FROM_THIS(a) \
CR (a, \
UFS_PASS_THRU_PRIVATE_DATA, \
ExtScsiPassThru, \
UFS_PASS_THRU_SIG \
)
typedef struct _UFS_DEVICE_MANAGEMENT_REQUEST_PACKET {
UINT64 Timeout;
VOID *DataBuffer;
UINT8 Opcode;
UINT8 DescId;
UINT8 Index;
UINT8 Selector;
UINT32 TransferLength;
UINT8 DataDirection;
} UFS_DEVICE_MANAGEMENT_REQUEST_PACKET;
//
// function prototype
//
/**
Tests to see if this driver supports a given controller. If a child device is provided,
it further tests to see if this driver supports creating a handle for the specified child device.
This function checks to see if the driver specified by This supports the device specified by
ControllerHandle. Drivers will typically use the device path attached to
ControllerHandle and/or the services from the bus I/O abstraction attached to
ControllerHandle to determine if the driver supports ControllerHandle. This function
may be called many times during platform initialization. In order to reduce boot times, the tests
performed by this function must be very small, and take as little time as possible to execute. This
function must not change the state of any hardware devices, and this function must be aware that the
device specified by ControllerHandle may already be managed by the same driver or a
different driver. This function must match its calls to AllocatePages() with FreePages(),
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
Since ControllerHandle may have been previously started by the same driver, if a protocol is
already in the opened state, then it must not be closed with CloseProtocol(). This is required
to guarantee the state of ControllerHandle is not modified by this function.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to test. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For bus drivers, if this parameter is not NULL, then
the bus driver must determine if the bus controller specified
by ControllerHandle and the child controller specified
by RemainingDevicePath are both supported by this
bus driver.
@retval EFI_SUCCESS The device specified by ControllerHandle and
RemainingDevicePath is supported by the driver specified by This.
@retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
RemainingDevicePath is already being managed by the driver
specified by This.
@retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
RemainingDevicePath is already being managed by a different
driver or an application that requires exclusive access.
Currently not implemented.
@retval EFI_UNSUPPORTED The device specified by ControllerHandle and
RemainingDevicePath is not supported by the driver specified by This.
**/
EFI_STATUS
EFIAPI
UfsPassThruDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Starts a device controller or a bus controller.
The Start() function is designed to be invoked from the EFI boot service ConnectController().
As a result, much of the error checking on the parameters to Start() has been moved into this
common boot service. It is legal to call Start() from other locations,
but the following calling restrictions must be followed or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE.
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
EFI_DEVICE_PATH_PROTOCOL.
3. Prior to calling Start(), the Supported() function for the driver specified by This must
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to start. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For a bus driver, if this parameter is NULL, then handles
for all the children of Controller are created by this driver.
If this parameter is not NULL and the first Device Path Node is
not the End of Device Path Node, then only the handle for the
child device specified by the first Device Path Node of
RemainingDevicePath is created by this driver.
If the first Device Path Node of RemainingDevicePath is
the End of Device Path Node, no child handle is created by this
driver.
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval Others The driver failded to start the device.
**/
EFI_STATUS
EFIAPI
UfsPassThruDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Stops a device controller or a bus controller.
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
As a result, much of the error checking on the parameters to Stop() has been moved
into this common boot service. It is legal to call Stop() from other locations,
but the following calling restrictions must be followed or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
same driver's Start() function.
2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
EFI_HANDLE. In addition, all of these handles must have been created in this driver's
Start() function, and the Start() function must have called OpenProtocol() on
ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle A handle to the device being stopped. The handle must
support a bus specific I/O protocol for the driver
to use to stop the device.
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
if NumberOfChildren is 0.
@retval EFI_SUCCESS The device was stopped.
@retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
**/
EFI_STATUS
EFIAPI
UfsPassThruDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
);
//
// EFI Component Name Functions
//
/**
Retrieves a Unicode string that is the user readable name of the driver.
This function retrieves the user readable name of a driver in the form of a
Unicode string. If the driver specified by This has a user readable name in
the language specified by Language, then a pointer to the driver name is
returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
by This does not support the language specified by Language,
then EFI_UNSUPPORTED is returned.
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
@param Language[in] A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
languages specified in SupportedLanguages. The
number of languages supported by a driver is up
to the driver writer. Language is specified
in RFC 4646 or ISO 639-2 language code format.
@param DriverName[out] A pointer to the Unicode string to return.
This Unicode string is the name of the
driver specified by This in the language
specified by Language.
@retval EFI_SUCCESS The Unicode string for the Driver specified by
This and the language specified by Language was
returned in DriverName.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER DriverName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
**/
EFI_STATUS
EFIAPI
UfsPassThruComponentNameGetDriverName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN CHAR8 *Language,
OUT CHAR16 **DriverName
);
/**
Retrieves a Unicode string that is the user readable name of the controller
that is being managed by a driver.
This function retrieves the user readable name of the controller specified by
ControllerHandle and ChildHandle in the form of a Unicode string. If the
driver specified by This has a user readable name in the language specified by
Language, then a pointer to the controller name is returned in ControllerName,
and EFI_SUCCESS is returned. If the driver specified by This is not currently
managing the controller specified by ControllerHandle and ChildHandle,
then EFI_UNSUPPORTED is returned. If the driver specified by This does not
support the language specified by Language, then EFI_UNSUPPORTED is returned.
@param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
@param ControllerHandle[in] The handle of a controller that the driver
specified by This is managing. This handle
specifies the controller whose name is to be
returned.
@param ChildHandle[in] The handle of the child controller to retrieve
the name of. This is an optional parameter that
may be NULL. It will be NULL for device
drivers. It will also be NULL for a bus drivers
that wish to retrieve the name of the bus
controller. It will not be NULL for a bus
driver that wishes to retrieve the name of a
child controller.
@param Language[in] A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
languages specified in SupportedLanguages. The
number of languages supported by a driver is up
to the driver writer. Language is specified in
RFC 4646 or ISO 639-2 language code format.
@param ControllerName[out] A pointer to the Unicode string to return.
This Unicode string is the name of the
controller specified by ControllerHandle and
ChildHandle in the language specified by
Language from the point of view of the driver
specified by This.
@retval EFI_SUCCESS The Unicode string for the user readable name in
the language specified by Language for the
driver specified by This was returned in
DriverName.
@retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
@retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
EFI_HANDLE.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER ControllerName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This is not currently
managing the controller specified by
ControllerHandle and ChildHandle.
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
**/
EFI_STATUS
EFIAPI
UfsPassThruComponentNameGetControllerName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN EFI_HANDLE ChildHandle OPTIONAL,
IN CHAR8 *Language,
OUT CHAR16 **ControllerName
);
/**
Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function
supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the
nonblocking I/O functionality is optional.
@param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
@param Target The Target is an array of size TARGET_MAX_BYTES and it represents
the id of the SCSI device to send the SCSI Request Packet. Each
transport driver may choose to utilize a subset of this size to suit the needs
of transport target representation. For example, a Fibre Channel driver
may use only 8 bytes (WWN) to represent an FC target.
@param Lun The LUN of the SCSI device to send the SCSI Request Packet.
@param Packet A pointer to the SCSI Request Packet to send to the SCSI device
specified by Target and Lun.
@param Event If nonblocking I/O is not supported then Event is ignored, and blocking
I/O is performed. If Event is NULL, then blocking I/O is performed. If
Event is not NULL and non blocking I/O is supported, then
nonblocking I/O is performed, and Event will be signaled when the
SCSI Request Packet completes.
@retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional
commands, InTransferLength bytes were transferred from
InDataBuffer. For write and bi-directional commands,
OutTransferLength bytes were transferred by
OutDataBuffer.
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that
could be transferred is returned in InTransferLength. For write
and bi-directional commands, OutTransferLength bytes were
transferred by OutDataBuffer.
@retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
SCSI Request Packets already queued. The caller may retry again later.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request
Packet.
@retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid.
@retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported
by the host adapter. This includes the case of Bi-directional SCSI
commands not supported by the implementation. The SCSI Request
Packet was not sent, so no additional status information is available.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
**/
EFI_STATUS
EFIAPI
UfsPassThruPassThru (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN UINT8 *Target,
IN UINT64 Lun,
IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
);
/**
Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These
can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal
Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the
Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI
channel.
@param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
@param Target On input, a pointer to the Target ID (an array of size
TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
On output, a pointer to the Target ID (an array of
TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
channel. An input value of 0xF(all bytes in the array are 0xF) in the
Target array retrieves the Target ID of the first SCSI device present on a
SCSI channel.
@param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI
channel. On output, a pointer to the LUN of the next SCSI device present
on a SCSI channel.
@retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI
channel was returned in Target and Lun.
@retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were
not returned on a previous call to GetNextTargetLun().
@retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
**/
EFI_STATUS
EFIAPI
UfsPassThruGetNextTargetLun (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN OUT UINT8 **Target,
IN OUT UINT64 *Lun
);
/**
Used to allocate and build a device path node for a SCSI device on a SCSI channel.
@param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
@param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the
Target ID of the SCSI device for which a device path node is to be
allocated and built. Transport drivers may chose to utilize a subset of
this size to suit the representation of targets. For example, a Fibre
Channel driver may use only 8 bytes (WWN) in the array to represent a
FC target.
@param Lun The LUN of the SCSI device for which a device path node is to be
allocated and built.
@param DevicePath A pointer to a single device path node that describes the SCSI device
specified by Target and Lun. This function is responsible for
allocating the buffer DevicePath with the boot service
AllocatePool(). It is the caller's responsibility to free
DevicePath when the caller is finished with DevicePath.
@retval EFI_SUCCESS The device path node that describes the SCSI device specified by
Target and Lun was allocated and returned in
DevicePath.
@retval EFI_INVALID_PARAMETER DevicePath is NULL.
@retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist
on the SCSI channel.
@retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
**/
EFI_STATUS
EFIAPI
UfsPassThruBuildDevicePath (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN UINT8 *Target,
IN UINT64 Lun,
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
);
/**
Used to translate a device path node to a Target ID and LUN.
@param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
@param DevicePath A pointer to a single device path node that describes the SCSI device
on the SCSI channel.
@param Target A pointer to the Target Array which represents the ID of a SCSI device
on the SCSI channel.
@param Lun A pointer to the LUN of a SCSI device on the SCSI channel.
@retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and
LUN, and they were returned in Target and Lun.
@retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL.
@retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN
does not exist.
@retval EFI_UNSUPPORTED This driver does not support the device path node type in
DevicePath.
**/
EFI_STATUS
EFIAPI
UfsPassThruGetTargetLun (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
OUT UINT8 **Target,
OUT UINT64 *Lun
);
/**
Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel.
@param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
@retval EFI_SUCCESS The SCSI channel was reset.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel.
@retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel.
@retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation.
**/
EFI_STATUS
EFIAPI
UfsPassThruResetChannel (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
);
/**
Resets a SCSI logical unit that is connected to a SCSI channel.
@param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
@param Target The Target is an array of size TARGET_MAX_BYTE and it represents the
target port ID of the SCSI device containing the SCSI logical unit to
reset. Transport drivers may chose to utilize a subset of this array to suit
the representation of their targets.
@param Lun The LUN of the SCSI device to reset.
@retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset.
@retval EFI_INVALID_PARAMETER Target or Lun is NULL.
@retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device
specified by Target and Lun.
@retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device
specified by Target and Lun.
**/
EFI_STATUS
EFIAPI
UfsPassThruResetTargetLun (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN UINT8 *Target,
IN UINT64 Lun
);
/**
Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either
be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs
for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to
see if a SCSI device is actually present at that location on the SCSI channel.
@param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
@param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
On output, a pointer to the Target ID (an array of
TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
channel. An input value of 0xF(all bytes in the array are 0xF) in the
Target array retrieves the Target ID of the first SCSI device present on a
SCSI channel.
@retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI
channel was returned in Target.
@retval EFI_INVALID_PARAMETER Target or Lun is NULL.
@retval EFI_TIMEOUT Target array is not all 0xF, and Target was not
returned on a previous call to GetNextTarget().
@retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
**/
EFI_STATUS
EFIAPI
UfsPassThruGetNextTarget (
IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
IN OUT UINT8 **Target
);
/**
Sends a UFS-supported SCSI Request Packet to a UFS device that is attached to the UFS host controller.
@param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
@param[in] Lun The LUN of the UFS device to send the SCSI Request Packet.
@param[in, out] Packet A pointer to the SCSI Request Packet to send to a specified Lun of the
UFS device.
@param[in] Event If nonblocking I/O is not supported then Event is ignored, and blocking
I/O is performed. If Event is NULL, then blocking I/O is performed. If
Event is not NULL and non blocking I/O is supported, then
nonblocking I/O is performed, and Event will be signaled when the
SCSI Request Packet completes.
@retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional
commands, InTransferLength bytes were transferred from
InDataBuffer. For write and bi-directional commands,
OutTransferLength bytes were transferred by
OutDataBuffer.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request
Packet.
@retval EFI_OUT_OF_RESOURCES The resource for transfer is not available.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
**/
EFI_STATUS
UfsExecScsiCmds (
IN UFS_PASS_THRU_PRIVATE_DATA *Private,
IN UINT8 Lun,
IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
);
/**
Initialize the UFS host controller.
@param[in] Private The pointer to the NVME_CONTROLLER_PRIVATE_DATA data structure.
@retval EFI_SUCCESS The NVM Express Controller is initialized successfully.
@retval Others A device error occurred while initializing the controller.
**/
EFI_STATUS
UfsControllerInit (
IN UFS_PASS_THRU_PRIVATE_DATA *Private
);
/**
Stop the UFS host controller.
@param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
@retval EFI_SUCCESS The Ufs Host Controller is stopped successfully.
@retval Others A device error occurred while stopping the controller.
**/
EFI_STATUS
UfsControllerStop (
IN UFS_PASS_THRU_PRIVATE_DATA *Private
);
/**
Allocate common buffer for host and UFS bus master access simultaneously.
@param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
@param[in] Size The length of buffer to be allocated.
@param[out] CmdDescHost A pointer to store the base system memory address of the allocated range.
@param[out] CmdDescPhyAddr The resulting map address for the UFS bus master to use to access the hosts CmdDescHost.
@param[out] CmdDescMapping A resulting value to pass to Unmap().
@retval EFI_SUCCESS The common buffer was allocated successfully.
@retval EFI_DEVICE_ERROR The allocation fails.
@retval EFI_OUT_OF_RESOURCES The memory resource is insufficient.
**/
EFI_STATUS
UfsAllocateAlignCommonBuffer (
IN UFS_PASS_THRU_PRIVATE_DATA *Private,
IN UINTN Size,
OUT VOID **CmdDescHost,
OUT EFI_PHYSICAL_ADDRESS *CmdDescPhyAddr,
OUT VOID **CmdDescMapping
);
/**
Set specified flag to 1 on a UFS device.
@param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
@param[in] FlagId The ID of flag to be set.
@retval EFI_SUCCESS The flag was set successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to set the flag.
@retval EFI_TIMEOUT A timeout occurred while waiting for the completion of setting the flag.
**/
EFI_STATUS
UfsSetFlag (
IN UFS_PASS_THRU_PRIVATE_DATA *Private,
IN UINT8 FlagId
);
/**
Read specified flag from a UFS device.
@param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
@param[in] FlagId The ID of flag to be read.
@param[out] Value The flag's value.
@retval EFI_SUCCESS The flag was read successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to read the flag.
@retval EFI_TIMEOUT A timeout occurred while waiting for the completion of reading the flag.
**/
EFI_STATUS
UfsReadFlag (
IN UFS_PASS_THRU_PRIVATE_DATA *Private,
IN UINT8 FlagId,
OUT UINT8 *Value
);
/**
Read or write specified device descriptor of a UFS device.
@param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
@param[in] Read The boolean variable to show r/w direction.
@param[in] DescId The ID of device descriptor.
@param[in] Index The Index of device descriptor.
@param[in] Selector The Selector of device descriptor.
@param[in, out] Descriptor The buffer of device descriptor to be read or written.
@param[in] DescSize The size of device descriptor buffer.
@retval EFI_SUCCESS The device descriptor was read/written successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to r/w the device descriptor.
@retval EFI_TIMEOUT A timeout occurred while waiting for the completion of r/w the device descriptor.
**/
EFI_STATUS
UfsRwDeviceDesc (
IN UFS_PASS_THRU_PRIVATE_DATA *Private,
IN BOOLEAN Read,
IN UINT8 DescId,
IN UINT8 Index,
IN UINT8 Selector,
IN OUT VOID *Descriptor,
IN UINT32 DescSize
);
/**
Read or write specified attribute of a UFS device.
@param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
@param[in] Read The boolean variable to show r/w direction.
@param[in] AttrId The ID of Attribute.
@param[in] Index The Index of Attribute.
@param[in] Selector The Selector of Attribute.
@param[in, out] Attributes The value of Attribute to be read or written.
@retval EFI_SUCCESS The Attribute was read/written successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to r/w the Attribute.
@retval EFI_TIMEOUT A timeout occurred while waiting for the completion of r/w the Attribute.
**/
EFI_STATUS
UfsRwAttributes (
IN UFS_PASS_THRU_PRIVATE_DATA *Private,
IN BOOLEAN Read,
IN UINT8 AttrId,
IN UINT8 Index,
IN UINT8 Selector,
IN OUT UINT32 *Attributes
);
/**
Sends NOP IN cmd to a UFS device for initialization process request.
For more details, please refer to UFS 2.0 spec Figure 13.3.
@param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
@retval EFI_SUCCESS The NOP IN command was sent by the host. The NOP OUT response was
received successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to execute NOP IN command.
@retval EFI_OUT_OF_RESOURCES The resource for transfer is not available.
@retval EFI_TIMEOUT A timeout occurred while waiting for the NOP IN command to execute.
**/
EFI_STATUS
UfsExecNopCmds (
IN UFS_PASS_THRU_PRIVATE_DATA *Private
);
/**
Call back function when the timer event is signaled.
@param[in] Event The Event this notify function registered to.
@param[in] Context Pointer to the context data registered to the Event.
**/
VOID
EFIAPI
ProcessAsyncTaskList (
IN EFI_EVENT Event,
IN VOID *Context
);
/**
Internal helper function which will signal the caller event and clean up
resources.
@param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data
structure.
@param[in] TransReq The pointer to the UFS_PASS_THRU_TRANS_REQ data
structure.
**/
VOID
EFIAPI
SignalCallerEvent (
IN UFS_PASS_THRU_PRIVATE_DATA *Private,
IN UFS_PASS_THRU_TRANS_REQ *TransReq
);
extern EFI_COMPONENT_NAME_PROTOCOL gUfsPassThruComponentName;
extern EFI_COMPONENT_NAME2_PROTOCOL gUfsPassThruComponentName2;
extern EFI_DRIVER_BINDING_PROTOCOL gUfsPassThruDriverBinding;
#endif
Reference in New Issue View Git Blame Copy Permalink