Ard Biesheuvel 8b816c624d ArmVirtPkg/VirtFdtDxe: set /chosen/linux,pci-probe-only to 1 in DTB ... Unlike Linux on x86, which typically honors the PCI configuration performed by the firmware, Linux on ARM assumes that the PCI subsystem needs to be configured from scratch. This is not entirely unreasonable given the historical background of embedded systems using very basic bootloaders, but is no longer tenable with Linux on arm64 moving to UEFI and ACPI in the server space. For this reason, PCI support in the arm64 kernel running under ACPI is likely to move to the x86 model of honoring the PCI configuration done by the firmware. So let's align with that in our DT based configuration as well, and set the /chosen/linux,pci-probe-only property to 1 in the Device Tree before we hand it to the OS. In case we are exposing an emulated VGA PCI device to the guest, which may subsequently get exposed via the Graphics Output protocol and driven as an efifb by the OS, this ensures the PCI resource allocations for the framebuffer are not overridden, since that would cause the framebuffer to stop working. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com>		2016-03-11 19:32:44 +07:00
..
VirtFdtDxe.c	ArmVirtPkg/VirtFdtDxe: set /chosen/linux,pci-probe-only to 1 in DTB	2016-03-11 19:32:44 +07:00
VirtFdtDxe.inf	ArmVirtPkg: VirtFdtDxe: detect fw-cfg DMA interface from the DTB	2015-09-24 21:40:36 +00:00