tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/IntelFspWrapperPkg/Library/SecPeiFspPlatformSecLibSample/Ia32/SecEntry.S

339 lines
9.7 KiB
ArmAsm
Raw Blame History

#------------------------------------------------------------------------------
#
# Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php.
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
# Module Name:
#
# SecEntry.S
#
# Abstract:
#
# This is the code that goes from real-mode to protected mode.
# It consumes the reset vector, calls TempRamInit API from FSP binary.
#
#------------------------------------------------------------------------------
#include "Fsp.h"
ASM_GLOBAL ASM_PFX(_gPcd_FixedAtBuild_PcdFlashFvFspBase)
ASM_GLOBAL ASM_PFX(_gPcd_FixedAtBuild_PcdFlashFvFspSize)
ASM_GLOBAL ASM_PFX(_TEXT_REALMODE)
ASM_PFX(_TEXT_REALMODE):
#----------------------------------------------------------------------------
#
# Procedure: _ModuleEntryPoint
#
# Input: None
#
# Output: None
#
# Destroys: Assume all registers
#
# Description:
#
# Transition to non-paged flat-model protected mode from a
# hard-coded GDT that provides exactly two descriptors.
# This is a bare bones transition to protected mode only
# used for a while in PEI and possibly DXE.
#
# After enabling protected mode, a far jump is executed to
# transfer to PEI using the newly loaded GDT.
#
# Return: None
#
# MMX Usage:
# MM0 = BIST State
# MM5 = Save time-stamp counter value high32bit
# MM6 = Save time-stamp counter value low32bit.
#
#----------------------------------------------------------------------------
.align 4
ASM_GLOBAL ASM_PFX(_ModuleEntryPoint)
ASM_PFX(_ModuleEntryPoint):
fninit # clear any pending Floating point exceptions
#
# Store the BIST value in mm0
#
movd %eax, %mm0
#
# Save time-stamp counter value
# rdtsc load 64bit time-stamp counter to EDX:EAX
#
rdtsc
movd %edx, %mm5
movd %ecx, %mm6
#
# Load the GDT table in GdtDesc
#
movl $GdtDesc, %esi
.byte 0x66
lgdt %cs:(%si)
#
# Transition to 16 bit protected mode
#
movl %cr0, %eax # Get control register 0
orl $0x00000003, %eax # Set PE bit (bit #0) & MP bit (bit #1)
movl %eax, %cr0 # Activate protected mode
movl %cr4, %eax # Get control register 4
orl $0x00000600, %eax # Set OSFXSR bit (bit #9) & OSXMMEXCPT bit (bit #10)
movl %eax, %cr4
#
# Now we're in 16 bit protected mode
# Set up the selectors for 32 bit protected mode entry
#
movw SYS_DATA_SEL, %ax
movw %ax, %ds
movw %ax, %es
movw %ax, %fs
movw %ax, %gs
movw %ax, %ss
#
# Transition to Flat 32 bit protected mode
# The jump to a far pointer causes the transition to 32 bit mode
#
movl ASM_PFX(ProtectedModeEntryLinearAddress), %esi
jmp *%cs:(%si)
ASM_GLOBAL ASM_PFX(_TEXT_PROTECTED_MODE)
ASM_PFX(_TEXT_PROTECTED_MODE):
#----------------------------------------------------------------------------
#
# Procedure: ProtectedModeEntryPoint
#
# Input: None
#
# Output: None
#
# Destroys: Assume all registers
#
# Description:
#
# This function handles:
# Call two basic APIs from FSP binary
# Initializes stack with some early data (BIST, PEI entry, etc)
#
# Return: None
#
#----------------------------------------------------------------------------
.align 4
ASM_GLOBAL ASM_PFX(ProtectedModeEntryPoint)
ASM_PFX(ProtectedModeEntryPoint):
# Find the fsp info header
movl ASM_PFX(_gPcd_FixedAtBuild_PcdFlashFvFspBase), %edi
movl ASM_PFX(_gPcd_FixedAtBuild_PcdFlashFvFspSize), %ecx
movl FVH_SIGINATURE_OFFSET(%edi), %eax
cmp $FVH_SIGINATURE_VALID_VALUE, %eax
jnz FspHeaderNotFound
xorl %eax, %eax
movw FVH_EXTHEADER_OFFSET_OFFSET(%edi), %ax
cmp %ax, 0
jnz FspFvExtHeaderExist
xorl %eax, %eax
movw FVH_HEADER_LENGTH_OFFSET(%edi), %ax # Bypass Fv Header
addl %eax, %edi
jmp FspCheckFfsHeader
FspFvExtHeaderExist:
addl %eax, %edi
movl FVH_EXTHEADER_SIZE_OFFSET(%edi), %eax # Bypass Ext Fv Header
addl %eax, %edi
# Round up to 8 byte alignment
movl %edi, %eax
andb $0x07, %al
jz FspCheckFfsHeader
and $0xFFFFFFF8, %edi
add $0x08, %edi
FspCheckFfsHeader:
# Check the ffs guid
movl (%edi), %eax
cmp $FSP_HEADER_GUID_DWORD1, %eax
jnz FspHeaderNotFound
movl 0x4(%edi), %eax
cmp $FSP_HEADER_GUID_DWORD2, %eax
jnz FspHeaderNotFound
movl 0x08(%edi), %eax
cmp $FSP_HEADER_GUID_DWORD3, %eax
jnz FspHeaderNotFound
movl 0x0c(%edi), %eax
cmp $FSP_HEADER_GUID_DWORD4, %eax
jnz FspHeaderNotFound
add $FFS_HEADER_SIZE_VALUE, %edi # Bypass the ffs header
# Check the section type as raw section
movb SECTION_HEADER_TYPE_OFFSET(%edi), %al
cmp $0x19, %al
jnz FspHeaderNotFound
addl $RAW_SECTION_HEADER_SIZE_VALUE, %edi # Bypass the section header
jmp FspHeaderFound
FspHeaderNotFound:
jmp .
FspHeaderFound:
# Get the fsp TempRamInit Api address
movl FSP_HEADER_IMAGEBASE_OFFSET(%edi), %eax
addl FSP_HEADER_TEMPRAMINIT_OFFSET(%edi), %eax
# Setup the hardcode stack
movl $TempRamInitStack, %esp
# Call the fsp TempRamInit Api
jmp *%eax
TempRamInitDone:
cmp $0x8000000E, %eax #Check if EFI_NOT_FOUND returned. Error code for Microcode Update not found.
je CallSecFspInit #If microcode not found, don't hang, but continue.
cmp $0x0, %eax
jnz FspApiFailed
# ECX: start of range
# EDX: end of range
CallSecFspInit:
xorl %eax, %eax
movl %edx, %esp
# Align the stack at DWORD
addl $3, %esp
andl $0xFFFFFFFC, %esp
pushl %edx
pushl %ecx
pushl %eax # zero - no hob list yet
call ASM_PFX(CallPeiCoreEntryPoint)
FspApiFailed:
jmp .
.align 0x10
TempRamInitStack:
.long TempRamInitDone
.long ASM_PFX(TempRamInitParams)
#
# ROM-based Global-Descriptor Table for the Tiano PEI Phase
#
.align 16
#
# GDT[0]: 0x00: Null entry, never used.
#
.equ NULL_SEL, . - GDT_BASE # Selector [0]
GDT_BASE:
BootGdtTable: .long 0
.long 0
#
# Linear data segment descriptor
#
.equ LINEAR_SEL, . - GDT_BASE # Selector [0x8]
.word 0xFFFF # limit 0xFFFFF
.word 0 # base 0
.byte 0
.byte 0x92 # present, ring 0, data, expand-up, writable
.byte 0xCF # page-granular, 32-bit
.byte 0
#
# Linear code segment descriptor
#
.equ LINEAR_CODE_SEL, . - GDT_BASE # Selector [0x10]
.word 0xFFFF # limit 0xFFFFF
.word 0 # base 0
.byte 0
.byte 0x9B # present, ring 0, data, expand-up, not-writable
.byte 0xCF # page-granular, 32-bit
.byte 0
#
# System data segment descriptor
#
.equ SYS_DATA_SEL, . - GDT_BASE # Selector [0x18]
.word 0xFFFF # limit 0xFFFFF
.word 0 # base 0
.byte 0
.byte 0x93 # present, ring 0, data, expand-up, not-writable
.byte 0xCF # page-granular, 32-bit
.byte 0
#
# System code segment descriptor
#
.equ SYS_CODE_SEL, . - GDT_BASE # Selector [0x20]
.word 0xFFFF # limit 0xFFFFF
.word 0 # base 0
.byte 0
.byte 0x9A # present, ring 0, data, expand-up, writable
.byte 0xCF # page-granular, 32-bit
.byte 0
#
# Spare segment descriptor
#
.equ SYS16_CODE_SEL, . - GDT_BASE # Selector [0x28]
.word 0xFFFF # limit 0xFFFFF
.word 0 # base 0
.byte 0x0E # Changed from F000 to E000.
.byte 0x9B # present, ring 0, code, expand-up, writable
.byte 0x00 # byte-granular, 16-bit
.byte 0
#
# Spare segment descriptor
#
.equ SYS16_DATA_SEL, . - GDT_BASE # Selector [0x30]
.word 0xFFFF # limit 0xFFFF
.word 0 # base 0
.byte 0
.byte 0x93 # present, ring 0, data, expand-up, not-writable
.byte 0x00 # byte-granular, 16-bit
.byte 0
#
# Spare segment descriptor
#
.equ SPARE5_SEL, . - GDT_BASE # Selector [0x38]
.word 0 # limit 0
.word 0 # base 0
.byte 0
.byte 0 # present, ring 0, data, expand-up, writable
.byte 0 # page-granular, 32-bit
.byte 0
.equ GDT_SIZE, . - BootGdtTable # Size, in bytes
#
# GDT Descriptor
#
GdtDesc: # GDT descriptor
.word GDT_SIZE - 1 # GDT limit
.long BootGdtTable # GDT base address
ASM_PFX(ProtectedModeEntryLinearAddress):
ProtectedModeEntryLinearOffset:
.long ASM_PFX(ProtectedModeEntryPoint) # Offset of our 32 bit code
.word LINEAR_CODE_SEL
Reference in New Issue View Git Blame Copy Permalink