audk/OvmfPkg/Library/PciHostBridgeLib/XenSupport.c

457 lines
14 KiB
C

/** @file
Scan the entire PCI bus for root bridges to support OVMF above Xen.
Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <PiDxe.h>
#include <IndustryStandard/Pci.h>
#include <IndustryStandard/Q35MchIch9.h>
#include <Protocol/PciHostBridgeResourceAllocation.h>
#include <Protocol/PciRootBridgeIo.h>
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/PciHostBridgeLib.h>
#include <Library/PciLib.h>
#include "PciHostBridge.h"
STATIC
VOID
PcatPciRootBridgeBarExisted (
IN UINTN Address,
OUT UINT32 *OriginalValue,
OUT UINT32 *Value
)
{
//
// Preserve the original value
//
*OriginalValue = PciRead32 (Address);
//
// Disable timer interrupt while the BAR is probed
//
DisableInterrupts ();
PciWrite32 (Address, 0xFFFFFFFF);
*Value = PciRead32 (Address);
PciWrite32 (Address, *OriginalValue);
//
// Enable interrupt
//
EnableInterrupts ();
}
STATIC
VOID
PcatPciRootBridgeParseBars (
IN UINT16 Command,
IN UINTN Bus,
IN UINTN Device,
IN UINTN Function,
IN UINTN BarOffsetBase,
IN UINTN BarOffsetEnd,
IN PCI_ROOT_BRIDGE_APERTURE *Io,
IN PCI_ROOT_BRIDGE_APERTURE *Mem,
IN PCI_ROOT_BRIDGE_APERTURE *MemAbove4G,
IN PCI_ROOT_BRIDGE_APERTURE *PMem,
IN PCI_ROOT_BRIDGE_APERTURE *PMemAbove4G
)
{
UINT32 OriginalValue;
UINT32 Value;
UINT32 OriginalUpperValue;
UINT32 UpperValue;
UINT64 Mask;
UINTN Offset;
UINT64 Base;
UINT64 Length;
UINT64 Limit;
PCI_ROOT_BRIDGE_APERTURE *MemAperture;
for (Offset = BarOffsetBase; Offset < BarOffsetEnd; Offset += sizeof (UINT32)) {
PcatPciRootBridgeBarExisted (
PCI_LIB_ADDRESS (Bus, Device, Function, Offset),
&OriginalValue, &Value
);
if (Value == 0) {
continue;
}
if ((Value & BIT0) == BIT0) {
//
// IO Bar
//
if (Command & EFI_PCI_COMMAND_IO_SPACE) {
Mask = 0xfffffffc;
Base = OriginalValue & Mask;
Length = ((~(Value & Mask)) & Mask) + 0x04;
if (!(Value & 0xFFFF0000)) {
Length &= 0x0000FFFF;
}
Limit = Base + Length - 1;
if (Base < Limit) {
if (Io->Base > Base) {
Io->Base = Base;
}
if (Io->Limit < Limit) {
Io->Limit = Limit;
}
}
}
} else {
//
// Mem Bar
//
if (Command & EFI_PCI_COMMAND_MEMORY_SPACE) {
Mask = 0xfffffff0;
Base = OriginalValue & Mask;
Length = Value & Mask;
if ((Value & (BIT1 | BIT2)) == 0) {
//
// 32bit
//
Length = ((~Length) + 1) & 0xffffffff;
if ((Value & BIT3) == BIT3) {
MemAperture = PMem;
} else {
MemAperture = Mem;
}
} else {
//
// 64bit
//
Offset += 4;
PcatPciRootBridgeBarExisted (
PCI_LIB_ADDRESS (Bus, Device, Function, Offset),
&OriginalUpperValue,
&UpperValue
);
Base = Base | LShiftU64 ((UINT64) OriginalUpperValue, 32);
Length = Length | LShiftU64 ((UINT64) UpperValue, 32);
Length = (~Length) + 1;
if ((Value & BIT3) == BIT3) {
MemAperture = PMemAbove4G;
} else {
MemAperture = MemAbove4G;
}
}
Limit = Base + Length - 1;
if (Base < Limit) {
if (MemAperture->Base > Base) {
MemAperture->Base = Base;
}
if (MemAperture->Limit < Limit) {
MemAperture->Limit = Limit;
}
}
}
}
}
}
PCI_ROOT_BRIDGE *
ScanForRootBridges (
UINTN *NumberOfRootBridges
)
{
UINTN PrimaryBus;
UINTN SubBus;
UINT8 Device;
UINT8 Function;
UINTN NumberOfDevices;
UINTN Address;
PCI_TYPE01 Pci;
UINT64 Attributes;
UINT64 Base;
UINT64 Limit;
UINT64 Value;
PCI_ROOT_BRIDGE_APERTURE Io, Mem, MemAbove4G, PMem, PMemAbove4G, *MemAperture;
PCI_ROOT_BRIDGE *RootBridges;
UINTN BarOffsetEnd;
*NumberOfRootBridges = 0;
RootBridges = NULL;
//
// After scanning all the PCI devices on the PCI root bridge's primary bus,
// update the Primary Bus Number for the next PCI root bridge to be this PCI
// root bridge's subordinate bus number + 1.
//
for (PrimaryBus = 0; PrimaryBus <= PCI_MAX_BUS; PrimaryBus = SubBus + 1) {
SubBus = PrimaryBus;
Attributes = 0;
Io.Base = Mem.Base = MemAbove4G.Base = PMem.Base = PMemAbove4G.Base = MAX_UINT64;
Io.Limit = Mem.Limit = MemAbove4G.Limit = PMem.Limit = PMemAbove4G.Limit = 0;
//
// Scan all the PCI devices on the primary bus of the PCI root bridge
//
for (Device = 0, NumberOfDevices = 0; Device <= PCI_MAX_DEVICE; Device++) {
for (Function = 0; Function <= PCI_MAX_FUNC; Function++) {
//
// Compute the PCI configuration address of the PCI device to probe
//
Address = PCI_LIB_ADDRESS (PrimaryBus, Device, Function, 0);
//
// Read the Vendor ID from the PCI Configuration Header
//
if (PciRead16 (Address) == MAX_UINT16) {
if (Function == 0) {
//
// If the PCI Configuration Read fails, or a PCI device does not
// exist, then skip this entire PCI device
//
break;
} else {
//
// If PCI function != 0, VendorId == 0xFFFF, we continue to search
// PCI function.
//
continue;
}
}
//
// Read the entire PCI Configuration Header
//
PciReadBuffer (Address, sizeof (Pci), &Pci);
//
// Increment the number of PCI device found on the primary bus of the
// PCI root bridge
//
NumberOfDevices++;
//
// Look for devices with the VGA Palette Snoop enabled in the COMMAND
// register of the PCI Config Header
//
if ((Pci.Hdr.Command & EFI_PCI_COMMAND_VGA_PALETTE_SNOOP) != 0) {
Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO;
Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16;
}
BarOffsetEnd = 0;
//
// PCI-PCI Bridge
//
if (IS_PCI_BRIDGE (&Pci)) {
//
// Get the Bus range that the PPB is decoding
//
if (Pci.Bridge.SubordinateBus > SubBus) {
//
// If the suborinate bus number of the PCI-PCI bridge is greater
// than the PCI root bridge's current subordinate bus number,
// then update the PCI root bridge's subordinate bus number
//
SubBus = Pci.Bridge.SubordinateBus;
}
//
// Get the I/O range that the PPB is decoding
//
Value = Pci.Bridge.IoBase & 0x0f;
Base = ((UINT32) Pci.Bridge.IoBase & 0xf0) << 8;
Limit = (((UINT32) Pci.Bridge.IoLimit & 0xf0) << 8) | 0x0fff;
if (Value == BIT0) {
Base |= ((UINT32) Pci.Bridge.IoBaseUpper16 << 16);
Limit |= ((UINT32) Pci.Bridge.IoLimitUpper16 << 16);
}
if (Base < Limit) {
if (Io.Base > Base) {
Io.Base = Base;
}
if (Io.Limit < Limit) {
Io.Limit = Limit;
}
}
//
// Get the Memory range that the PPB is decoding
//
Base = ((UINT32) Pci.Bridge.MemoryBase & 0xfff0) << 16;
Limit = (((UINT32) Pci.Bridge.MemoryLimit & 0xfff0) << 16) | 0xfffff;
if (Base < Limit) {
if (Mem.Base > Base) {
Mem.Base = Base;
}
if (Mem.Limit < Limit) {
Mem.Limit = Limit;
}
}
//
// Get the Prefetchable Memory range that the PPB is decoding
//
Value = Pci.Bridge.PrefetchableMemoryBase & 0x0f;
Base = ((UINT32) Pci.Bridge.PrefetchableMemoryBase & 0xfff0) << 16;
Limit = (((UINT32) Pci.Bridge.PrefetchableMemoryLimit & 0xfff0)
<< 16) | 0xfffff;
MemAperture = &PMem;
if (Value == BIT0) {
Base |= LShiftU64 (Pci.Bridge.PrefetchableBaseUpper32, 32);
Limit |= LShiftU64 (Pci.Bridge.PrefetchableLimitUpper32, 32);
MemAperture = &PMemAbove4G;
}
if (Base < Limit) {
if (MemAperture->Base > Base) {
MemAperture->Base = Base;
}
if (MemAperture->Limit < Limit) {
MemAperture->Limit = Limit;
}
}
//
// Look at the PPB Configuration for legacy decoding attributes
//
if ((Pci.Bridge.BridgeControl & EFI_PCI_BRIDGE_CONTROL_ISA)
== EFI_PCI_BRIDGE_CONTROL_ISA) {
Attributes |= EFI_PCI_ATTRIBUTE_ISA_IO;
Attributes |= EFI_PCI_ATTRIBUTE_ISA_IO_16;
Attributes |= EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO;
}
if ((Pci.Bridge.BridgeControl & EFI_PCI_BRIDGE_CONTROL_VGA)
== EFI_PCI_BRIDGE_CONTROL_VGA) {
Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO;
Attributes |= EFI_PCI_ATTRIBUTE_VGA_MEMORY;
Attributes |= EFI_PCI_ATTRIBUTE_VGA_IO;
if ((Pci.Bridge.BridgeControl & EFI_PCI_BRIDGE_CONTROL_VGA_16)
!= 0) {
Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16;
Attributes |= EFI_PCI_ATTRIBUTE_VGA_IO_16;
}
}
BarOffsetEnd = OFFSET_OF (PCI_TYPE01, Bridge.Bar[2]);
} else {
//
// Parse the BARs of the PCI device to get what I/O Ranges, Memory
// Ranges, and Prefetchable Memory Ranges the device is decoding
//
if ((Pci.Hdr.HeaderType & HEADER_LAYOUT_CODE) == HEADER_TYPE_DEVICE) {
BarOffsetEnd = OFFSET_OF (PCI_TYPE00, Device.Bar[6]);
}
}
PcatPciRootBridgeParseBars (
Pci.Hdr.Command,
PrimaryBus,
Device,
Function,
OFFSET_OF (PCI_TYPE00, Device.Bar),
BarOffsetEnd,
&Io,
&Mem, &MemAbove4G,
&PMem, &PMemAbove4G
);
//
// See if the PCI device is an IDE controller
//
if (IS_CLASS2 (&Pci, PCI_CLASS_MASS_STORAGE,
PCI_CLASS_MASS_STORAGE_IDE)) {
if (Pci.Hdr.ClassCode[0] & 0x80) {
Attributes |= EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO;
Attributes |= EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO;
}
if (Pci.Hdr.ClassCode[0] & 0x01) {
Attributes |= EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO;
}
if (Pci.Hdr.ClassCode[0] & 0x04) {
Attributes |= EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO;
}
}
//
// See if the PCI device is a legacy VGA controller or
// a standard VGA controller
//
if (IS_CLASS2 (&Pci, PCI_CLASS_OLD, PCI_CLASS_OLD_VGA) ||
IS_CLASS2 (&Pci, PCI_CLASS_DISPLAY, PCI_CLASS_DISPLAY_VGA)
) {
Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO;
Attributes |= EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16;
Attributes |= EFI_PCI_ATTRIBUTE_VGA_MEMORY;
Attributes |= EFI_PCI_ATTRIBUTE_VGA_IO;
Attributes |= EFI_PCI_ATTRIBUTE_VGA_IO_16;
}
//
// See if the PCI Device is a PCI - ISA or PCI - EISA
// or ISA_POSITIVIE_DECODE Bridge device
//
if (Pci.Hdr.ClassCode[2] == PCI_CLASS_BRIDGE) {
if (Pci.Hdr.ClassCode[1] == PCI_CLASS_BRIDGE_ISA ||
Pci.Hdr.ClassCode[1] == PCI_CLASS_BRIDGE_EISA ||
Pci.Hdr.ClassCode[1] == PCI_CLASS_BRIDGE_ISA_PDECODE) {
Attributes |= EFI_PCI_ATTRIBUTE_ISA_IO;
Attributes |= EFI_PCI_ATTRIBUTE_ISA_IO_16;
Attributes |= EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO;
}
}
//
// If this device is not a multi function device, then skip the rest
// of this PCI device
//
if (Function == 0 && !IS_PCI_MULTI_FUNC (&Pci)) {
break;
}
}
}
//
// If at least one PCI device was found on the primary bus of this PCI
// root bridge, then the PCI root bridge exists.
//
if (NumberOfDevices > 0) {
RootBridges = ReallocatePool (
(*NumberOfRootBridges) * sizeof (PCI_ROOT_BRIDGE),
(*NumberOfRootBridges + 1) * sizeof (PCI_ROOT_BRIDGE),
RootBridges
);
ASSERT (RootBridges != NULL);
InitRootBridge (
Attributes, Attributes, 0,
(UINT8) PrimaryBus, (UINT8) SubBus,
&Io, &Mem, &MemAbove4G, &PMem, &PMemAbove4G,
&RootBridges[*NumberOfRootBridges]
);
RootBridges[*NumberOfRootBridges].ResourceAssigned = TRUE;
//
// Increment the index for the next PCI Root Bridge
//
(*NumberOfRootBridges)++;
}
}
return RootBridges;
}