audk/DuetPkg
niruiyu d9dd98f0dc Fix DUET x64 hang in Video Option ROM.
The root cause is EfiLdr module was wrongly loaded to address 0x0 corrupting the BDA(0x400) region. The patch set module base address to 0x10000 which aligns to R8 behavior.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9824 6f19259b-4bc3-4df7-8a09-765794883524
2010-01-26 09:23:24 +00:00
..
BiosVideoThunkDxe Detab in DuetPkg 2009-08-21 02:51:09 +00:00
BootSector Remove .rept directive to improve portability. 2009-08-21 03:20:20 +00:00
CpuDxe Remove .rept directive to improve portability. 2009-08-21 03:20:20 +00:00
DataHubGenDxe Use GetFirstGuidHob() instead of GetNextGuidHob() when only the first GUID instance is required 2010-01-25 01:52:31 +00:00
DxeIpl 1. update bat file to generate right bootia32.efi/bootx64.efi file according to command line parameters. 2010-01-19 08:28:28 +00:00
EfiLdr Fix DUET x64 hang in Video Option ROM. 2010-01-26 09:23:24 +00:00
FSVariable Use GetFirstGuidHob() instead of GetNextGuidHob() when only the first GUID instance is required 2010-01-25 01:52:31 +00:00
FvbRuntimeService Use GetFirstGuidHob() instead of GetNextGuidHob() when only the first GUID instance is required 2010-01-25 01:52:31 +00:00
Include Correct license's header. 2009-12-23 15:35:51 +00:00
LegacyMetronome Update Copyright date 2010-01-14 00:24:41 +00:00
Library Use GetFirstGuidHob() instead of GetNextGuidHob() when only the first GUID instance is required 2010-01-25 01:52:31 +00:00
PciBusNoEnumerationDxe Fix a obvious bug for judge whether the PPB support ISA 2009-12-12 08:55:02 +00:00
PciRootBridgeNoEnumerationDxe Update to consume CPU I/O 2 Protocol instead of Framework CPU I/O Protocol. 2009-12-07 12:48:53 +00:00
RtPlatformStatusCode Remove use of EFI_BOOTSERVICE and EFI_RUNTIMESERVICE. This is not managed through module types. 2008-12-07 22:34:12 +00:00
SmbiosGenDxe Use GetFirstGuidHob() instead of GetNextGuidHob() when only the first GUID instance is required 2010-01-25 01:52:31 +00:00
CreateBootDisk.bat 1. update bat file to generate right bootia32.efi/bootx64.efi file according to command line parameters. 2010-01-19 08:28:28 +00:00
CreateBootDisk.sh 1. update bat file to generate right bootia32.efi/bootx64.efi file according to command line parameters. 2010-01-19 08:28:28 +00:00
DuetPkg.dec Move gEfiPciOptionRomTableGuid from IntelFrameworkModulePkg to the DuetPkg 2009-06-05 21:32:38 +00:00
DuetPkg.dsc Add SmbiosDxe module that is required by BDS 2010-01-15 21:11:55 +00:00
DuetPkg.fdf Seems the BiosVideo thunk does not work recently, temporary disable it. 2010-01-16 08:32:38 +00:00
PostBuild.bat This patch includes: 2009-06-22 03:01:53 +00:00
PostBuild.sh Correct the shell script file type as executable 2009-11-17 07:04:47 +00:00
ReadMe.txt 1. update bat file to generate right bootia32.efi/bootx64.efi file according to command line parameters. 2010-01-19 08:28:28 +00:00

ReadMe.txt

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Developer's UEFI Emulation (DUET) on Edk2

A. Build DUET image on Windows Platform
========================================
1. Tools preparation

To build DUET image, following tools are required:

  1). *Visual Studio 2005*
      Assume installed at <VS_PATH>, 
      e.g.: C:\Program Files\Microsoft Visual Studio .NET 2003\.
  2). WinDDK
      Assume installed at <WIN_DDK_PATH>, e.g.: C:\WINDDK\3790.1830\.
      
2. Build steps

2.1 Build Duet Platform module   

  1). run cmd.exe to open command line window.
  2). enter workspace root directory such as c:\edk2_tree
  2). run "edksetup.bat"
  3). run "build -p DuetPkg\DuetPkg.dsc -a IA32" for IA32 architecture platform or 
          "build -p DuetPkg\DuetPkg.dsc -a X64" for X64 architecture platform.
 
2.2 Execute post build actions  
  1). enter <Workspace>\DuetPkg directory.
  2). run "PostBuild.bat IA32" for IA32 architecture platform or 
          "PostBuild.bat X64" for X64 architecture platform.

Create bootable disk
======================
  
3. Create boot disk
  The following steps are same for IA32 architecture platform or X64 architecture platform.
  
3.1 Create floppy boot disk
  1). enter <Workspace>\DuetPkg directory.
  2). Insert a floppy disk to drive
  3). run "CreateBootDisk.bat floppy a: FAT12 IA32" if floppy drive is a: disk and Arch to boot is IA32.
      or
      run "CreateBootDisk.bat floppy a: FAT12 X64" if floppy drive is a: disk and Arch to boot is X64.
3.2 Create usb boot disk
  1). enter <Workspace>\DuetPkg directory.
  2). Plugin usb disk
  3). run "CreateBootDisk.bat usb e: FAT16 IA32" if usb drive is e: and FAT format is FAT16 and Arch to boot is IA32.
      or "CreateBootDisk.bat usb e: FAT16 X64" if usb drive is e: and FAT format is FAT16 and Arch to boot is X64.
      or "CreateBootDisk.bat usb e: FAT32 IA32" if usb drive is e: and FAT format is FAT32 and Arch to boot is IA32.
      or "CreateBootDisk.bat usb e: FAT32 X64" if usb drive is e: and FAT format is FAT32 and Arch to boot is X64.
  4). UnPlug usb disk and plugin it again.
  5). run "CreateBootDisk.bat usb e: FAT16 IA32 step2" if usb drive is e: and FAT format is FAT16 and Arch to boot is IA32.
      or "CreateBootDisk.bat usb e: FAT16 X64 step2" if usb drive is e: and FAT format is FAT16 and Arch to boot is X64.
      or "CreateBootDisk.bat usb e: FAT32 IA32 step2" if usb drive is e: and FAT format is FAT32 and Arch to boot is IA32.
      or "CreateBootDisk.bat usb e: FAT32 X64 step2" if usb drive is e: and FAT format is FAT32 and Arch to boot is X64.
          
B. Build DUET image on Linux Platform
======================================        
1. Tools preparation

	To build DUET image, Mingw GCC is required:
	
		1).  Check out build tools project from svn repository: https://buildtools.tianocore.org/svn/buildtools/trunk/BaseTools
		2).  Assume check out directory is /R9/BaseTools, enter /R9/BaseTools/gcc directory. Please refer to README.txt install all the necessary
			 build packages following:
			 * Python 2.5
			 * texinfo
             * bison
             * flex
             * libmpfr
             * libgmp 
             * As well as (possibly) others tools and development packages
             
		3).  Run mingw-gcc-install.py from gcc folder, this script will download/build/install MingwGCC and BinUtil automatically
		4).  Create symbol link in linux environment at /opt to match default setting in tools_def.txt
			 "ln -s /R9/BaseTools/gcc/symlinks/ar   /opt/tiano/i386-tiano-pe/i386-tiano-pe/bin/ar"
			 "ln -s /R9/BaseTools/gcc/symlinks/gcc  /opt/tiano/i386-tiano-pe/i386-tiano-pe/bin/gcc"
			 "ln -s /R9/BaseTools/gcc/symlinks/ld   /opt/tiano/i386-tiano-pe/i386-tiano-pe/bin/ld"
		
	
2. Build steps

2.1 Build Duet Platform module   

  1). run cmd.exe to open command line window.
  2). enter workspace root directory such as /R9_tree
  2). run "edksetup.sh BaseTools"
  3). run "build -p DuetPkg/DuetPkg.dsc -a IA32 -t UNIXGCC" for IA32 architecture platform or 
          "build -p DuetPkg/DuetPkg.dsc -a X64 -t UNIXGCC" for X64 architecture platform.
  
2.2 Execute post build actions  
  1). enter /R9_tree/DuetPkg directory.
  2). run "./PostBuild.sh IA32" for IA32 architecture platform or 
          "./PostBuild.sh X64" for X64 architecture platform.

 NOTE: After post build action, you should check the size of EfiLdr at $WORKSPACE/Build/DuetPkg/DEBUG_UNIXGCC directory, it must less than 470k.
       If not, you should manually remove some unnecessary drivers at DuetPkg.fdf file.
 
3. Create bootable disk
   The following steps are same for IA32 architecture platform or X64 architecture platform.
   Now only support floopy.
   
   3.1 Create floppy boot disk
	  1). enter /R9_tree/DuetPkg directory.
	  2). Insert a floppy disk to drive
	  3). run "CreateBootDisk.sh" to build floppy drive
		  such as "./CreateBootDisk.sh floppy /media/floppy0 /dev/fd0 FAT12 IA32"