audk/DuetPkg
qhuang8 f3eb213152 Make end of line consistent for DuetPkg. There is no other update.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9149 6f19259b-4bc3-4df7-8a09-765794883524
2009-08-20 06:44:42 +00:00
..
BiosVideoThunkDxe if module doesn't explicitly depend on specific Pci spec, it should include IndustryStandard/Pci.h rather than Pcixxx.h. 2009-07-24 06:18:30 +00:00
BootSector Make end of line consistent for DuetPkg. There is no other update. 2009-08-20 06:44:42 +00:00
CpuDxe If module really is a Framework module and not a PI module, then use FrameworkDxe.h instead of PeDxe.h and FrameworkPei.h instead of PiPei.h 2009-07-11 23:29:43 +00:00
DataHubGenDxe roll back the change on the naming of DataHubRecords.h for backward compatibility. 2009-07-10 10:16:50 +00:00
DxeIpl add correct [Depex] section. 2009-08-12 06:55:30 +00:00
EfiLdr Delete useless files. 2009-05-06 09:46:04 +00:00
FSVariable Fix a bug that L"PlatformLang" must be a null-terminated ASCII string according to UEFI spec. 2009-05-04 05:56:36 +00:00
FvbRuntimeService retire gEfiAlternateFvBlockGuid. All platform FvbRuntimeDxe drivers will not produce such protocol to signify itself support writable FVB protocol. 2009-03-12 05:10:53 +00:00
Include Move gEfiPciOptionRomTableGuid from IntelFrameworkModulePkg to the DuetPkg 2009-06-05 21:32:38 +00:00
LegacyMetronome 1, Remove DxeReportStatus driver, because DxeIpl has published a instance from hob. And new status code library will use this instance from hob. 2009-01-07 09:36:44 +00:00
Library if module doesn't explicitly depend on specific Pci spec, it should include IndustryStandard/Pci.h rather than Pcixxx.h. 2009-07-24 06:18:30 +00:00
PciBusNoEnumerationDxe add correct [Depex] section. 2009-08-12 06:55:30 +00:00
PciRootBridgeNoEnumerationDxe add correct [Depex] section. 2009-08-12 06:55:30 +00:00
RtPlatformStatusCode Remove use of EFI_BOOTSERVICE and EFI_RUNTIMESERVICE. This is not managed through module types. 2008-12-07 22:34:12 +00:00
CreateBootDisk.bat This patch includes: 2009-06-22 03:01:53 +00:00
CreateBootDisk.sh This patch includes: 2009-06-22 03:01:53 +00:00
DuetPkg.dec Move gEfiPciOptionRomTableGuid from IntelFrameworkModulePkg to the DuetPkg 2009-06-05 21:32:38 +00:00
DuetPkg.dsc Use PcAtChipsetPkg's IdeControllerDxe driver and retire the one in DuetPkg. 2009-07-28 02:57:17 +00:00
DuetPkg.fdf Use PcAtChipsetPkg's IdeControllerDxe driver and retire the one in DuetPkg. 2009-07-28 02:57:17 +00:00
PostBuild.bat This patch includes: 2009-06-22 03:01:53 +00:00
PostBuild.sh Correct the file name case for linux environment 2009-07-08 07:25:02 +00:00
ReadMe.txt Add a note for Duet build under Linux environment. 2009-04-20 02:33:08 +00:00

ReadMe.txt

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Developer's UEFI Emulation (DUET) on Edk2

A. Build DUET image on Windows Platform
========================================
1. Tools preparation

To build DUET image, following tools are required:

  1). *Visual Studio 2005*
      Assume installed at <VS_PATH>, 
      e.g.: C:\Program Files\Microsoft Visual Studio .NET 2003\.
  2). WinDDK
      Assume installed at <WIN_DDK_PATH>, e.g.: C:\WINDDK\3790.1830\.
      
2. Build steps

2.1 Build Duet Platform module   

  1). run cmd.exe to open command line window.
  2). enter workspace root directory such as c:\edk2_tree
  2). run "edksetup.bat"
  3). run "build -p DuetPkg\DuetPkg.dsc -a IA32" for IA32 architecture platform or 
          "build -p DuetPkg\DuetPkg.dsc -a X64" for X64 architecture platform.

2.2 Build BootSector
  1). run "build -p DuetPkg\DuetPkg.dsc -m DuetPkg\BootSector\BootSector.inf -a IA32"
  
2.3 Execute post build actions  
  1). enter <Workspace>\DuetPkg directory.
  2). run "PostBuild.bat IA32" for IA32 architecture platform or 
          "PostBuild.bat X64" for X64 architecture platform.

Create bootable disk
======================
  
3. Create boot disk
  The following steps are same for IA32 architecture platform or X64 architecture platform.
  
3.1 Create floppy boot disk
  1). enter <Workspace>\DuetPkg directory.
  2). Insert a floppy disk to drive
  3). run "CreateBootDisk.bat floppy a: FAT12" if floppy drive is a: disk.
  
3.2 Create usb boot disk
  1). enter <Workspace>\DuetPkg directory.
  2). Plugin usb disk
  3). run "CreateBootDisk.bat usb e: FAT16" if usb drive is e: and FAT format is FAT16 or
          "CreateBootDisk.bat usb e: FAT32" if usb drive is e: and FAT format is FAT32
  4). UnPlug usb disk and plugin it again.
  5). run "CreateBootDisk.bat usb e: FAT16 step2" if usb drive is e: and FAT format is FAT16 or 
          "CreateBootDisk.bat usb e: FAT32 step2" if usb drive is e: and FAT format is FAT32.
          
          
B. Build DUET image on Linux Platform
======================================        
1. Tools preparation

	To build DUET image, Mingw GCC is required:
	
		1).  Check out build tools project from svn repository: https://buildtools.tianocore.org/svn/buildtools/trunk/BaseTools
		2).  Assume check out directory is /R9/BaseTools, enter /R9/BaseTools/gcc directory. Please refer to README.txt install all the necessary
			 build packages following:
			 * Python 2.5
			 * texinfo
             * bison
             * flex
             * libmpfr
             * libgmp 
             * As well as (possibly) others tools and development packages
             
		3).  Run mingw-gcc-install.py from gcc folder, this script will download/build/install MingwGCC and BinUtil automatically
		4).  Create symbol link in linux environment at /opt to match default setting in tools_def.txt
			 "ln -s /R9/BaseTools/gcc/symlinks/ar   /opt/tiano/i386-tiano-pe/i386-tiano-pe/bin/ar"
			 "ln -s /R9/BaseTools/gcc/symlinks/gcc  /opt/tiano/i386-tiano-pe/i386-tiano-pe/bin/gcc"
			 "ln -s /R9/BaseTools/gcc/symlinks/ld   /opt/tiano/i386-tiano-pe/i386-tiano-pe/bin/ld"
		
	
2. Build steps

2.1 Build Duet Platform module   

  1). run cmd.exe to open command line window.
  2). enter workspace root directory such as /R9_tree
  2). run "edksetup.sh BaseTools"
  3). run "build -p DuetPkg/DuetPkg.dsc -a IA32 -t UNIXGCC" for IA32 architecture platform or 
          "build -p DuetPkg/DuetPkg.dsc -a X64 -t UNIXGCC" for X64 architecture platform.

2.2 Build BootSector
  1). run "build -p DuetPkg/DuetPkg.dsc -m DuetPkg/BootSector/BootSector.inf -a IA32 -t UNIXGCC"
  
2.3 Execute post build actions  
  1). enter /R9_tree/DuetPkg directory.
  2). run "./PostBuild.sh IA32" for IA32 architecture platform or 
          "./PostBuild.sh X64" for X64 architecture platform.

 NOTE: After post build action, you should check the size of EfiLdr at $WORKSPACE/Build/DuetPkg/DEBUG_UNIXGCC directory, it must less than 470k.
       If not, you should manually remove some unnecessary drivers at DuetPkg.fdf file.
 
3. Create bootable disk
   The following steps are same for IA32 architecture platform or X64 architecture platform.
   Now only support floopy.
   
   3.1 Create floppy boot disk
	  1). enter /R9_tree/DuetPkg directory.
	  2). Insert a floppy disk to drive
	  3). run "CreateBootDisk.sh" to build floppy drive
		  such as "./CreateBootDisk.sh floppy /media/floppy0 /dev/fd0 FAT12"