audk/Nt32Pkg/Nt32Pkg.fdf

298 lines
13 KiB
Plaintext

# This is NT32 FDF file
#
# Copyright (c) 2007, Intel Corporation
#
# All rights reserved. This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system¡¯s
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.Fv_Recovery]
BaseAddress = 0x0|PcdWinNtFdBaseAddress #The base address of the FLASH Device.
Size = 0x002a0000 #The size in bytes of the FLASH Device
ErasePolarity = 1
BlockSize = 0x10000
NumBlocks = 0x2a
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x00000000|0x00280000
PcdWinNtFlashFvRecoveryBase|PcdWinNtFlashFvRecoverySize
FV = FvRecovery
0x00280000|0x0000c000
PcdWinNtFlashNvStorageVariableBase|PcdFlashNvStorageVariableSize
DATA = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,
0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,
0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
0x5f, 0x46, 0x56, 0x48, 0xff, 0x8c, 0xff, 0xff,
0x48, 0x00, 0x3b, 0x7c, 0x00, 0x00, 0x00, 0x01,
0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x24, 0x56, 0x53, 0x53, 0xb8, 0xbf, 0x00, 0x00,
0x5a, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
0x0028c000|0x00002000
PcdWinNtFlashNvStorageEventLogBase|PcdWinNtFlashNvStorageEventLogSize
0x0028e000|0x00002000
PcdWinNtFlashNvStorageFtwWorkingBase|PcdFlashNvStorageFtwWorkingSize
DATA = {
0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,
0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,
0xd2, 0x5f, 0x05, 0x9e, 0xfe, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xe0, 0x1f, 0x00, 0x00
}
0x00290000|0x00010000
PcdWinNtFlashNvStorageFtwSpareBase|PcdFlashNvStorageFtwSpareSize
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FvRecovery]
FvAlignment = 16 #FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
################################################################################
#
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.
# Parsing tools will scan the INF file to determine the type of component or module.
# The component or module type is used to reference the standard rules
# defined elsewhere in the FDF file.
#
# The format for INF statements is:
# INF $(PathAndInfFileName)
#
################################################################################
##
# PEI Phase modules
##
INF $(WORKSPACE)/MdeModulePkg/Core/Pei/PeiMain.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf
INF $(WORKSPACE)/Nt32Pkg/BootModePei/BootModePei.inf
INF $(WORKSPACE)/Nt32Pkg/WinNtFlashMapPei/WinNtFlashMapPei.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/MemoryTest/BaseMemoryTestPei/BaseMemoryTestPei.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF $(WORKSPACE)/Nt32Pkg/WinNtAutoScanPei/WinNtAutoScanPei.inf
INF $(WORKSPACE)/Nt32Pkg/WinNtFirmwareVolumePei/WinNtFirmwareVolumePei.inf
INF $(WORKSPACE)/Nt32Pkg/WinNtThunkPPIToProtocolPei/WinNtThunkPPIToProtocolPei.inf
INF $(WORKSPACE)/MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
##
# DXE Phase modules
##
INF $(WORKSPACE)/MdeModulePkg/Core/Dxe/DxeMain.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF $(WORKSPACE)/Nt32Pkg/MetronomeDxe/MetronomeDxe.inf
INF $(WORKSPACE)/Nt32Pkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF $(WORKSPACE)/Nt32Pkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF $(WORKSPACE)/Nt32Pkg/FvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/HiiDataBaseDxe/HiiDatabase.inf
INF $(WORKSPACE)/Nt32Pkg/WinNtThunkDxe/WinNtThunkDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/FirmwareVolume/Crc32SectionExtractDxe/Crc32SectionExtractDxe.inf
INF $(WORKSPACE)/Nt32Pkg/CpuRuntimeDxe/CpuRuntimeDxe.inf
INF $(WORKSPACE)/Nt32Pkg/PlatformBdsDxe/PlatformBdsDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/FirmwareVolume/FaultTolerantWriteDxe/FtwLite.inf
INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf
INF $(WORKSPACE)/Nt32Pkg/MiscSubClassPlatformDxe/MiscSubClassPlatformDxe.inf
INF $(WORKSPACE)/Nt32Pkg/TimerDxe/TimerDxe.inf
INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/StatusCode/Dxe/DxeStatusCode.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/WatchDogTimerDxe/WatchDogTimer.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/SetupBrowserDxe/SetupBrowser.inf
INF $(WORKSPACE)/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Bus/Pci/AtapiPassThruDxe/AtapiPassThru.inf
INF $(WORKSPACE)/IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf ##This driver follows UEFI specification definition
INF $(WORKSPACE)/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf ##This driver follows UEFI specification definition
INF $(WORKSPACE)/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
INF $(WORKSPACE)/Nt32Pkg/WinNtBusDriverDxe/WinNtBusDriverDxe.inf
INF $(WORKSPACE)/Nt32Pkg/WinNtBlockIoDxe/WinNtBlockIoDxe.inf
INF $(WORKSPACE)/Nt32Pkg/WinNtConsoleDxe/WinNtConsoleDxe.inf
INF $(WORKSPACE)/Nt32Pkg/WinNtSerialIoDxe/WinNtSerialIoDxe.inf
INF $(WORKSPACE)/Nt32Pkg/WinNtGopDxe/WinNtGopDxe.inf
INF $(WORKSPACE)/Nt32Pkg/WinNtSimpleFileSystemDxe/WinNtSimpleFileSystemDxe.inf
INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf
INF $(WORKSPACE)/MdeModulePkg/Application/HelloWorld/HelloWorld.inf
################################################################################
#
# FILE statements are provided so that a platform integrator can include
# complete EFI FFS files, as well as a method for constructing FFS files
# using curly "{}" brace scoping. The following three FILEs are
# for binary shell, binary fat and logo module.
#
################################################################################
FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 CHECKSUM {
SECTION COMPRESS PI_STD {
SECTION GUIDED {
SECTION PE32 = EdkShellBinPkg/FullShell/ia32/Shell_Full.efi
}
}
}
FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F CHECKSUM {
SECTION COMPRESS PI_STD {
SECTION GUIDED {
SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi
}
}
}
FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D CHECKSUM {
SECTION COMPRESS PI_STD {
SECTION GUIDED {
SECTION RAW = MdeModulePkg/Logo/Logo.bmp
}
}
}
################################################################################
#
# Rules are use with the [FV] section¡¯s module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) CheckSum {
PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI Optional $(MODULE_NAME)
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) CheckSum {
PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).Depex
PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI Optional $(MODULE_NAME)
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) CheckSum {
COMPRESS PI_STD {
PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI Optional $(MODULE_NAME)
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)
}
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) CheckSum {
COMPRESS PI_STD {
GUIDED {
DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI Optional $(MODULE_NAME)
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)
}
}
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) CheckSum {
COMPRESS PI_STD {
GUIDED {
DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI Optional $(MODULE_NAME)
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)
}
}
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) CheckSum {
COMPRESS PI_STD {
GUIDED {
DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI Optional $(MODULE_NAME)
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)
}
}
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) CheckSum {
COMPRESS PI_STD {
GUIDED {
PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI Optional $(MODULE_NAME)
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)
}
}
}