tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c

1103 lines
34 KiB
C
Raw Blame History

/** @file
16550 UART Serial Port library functions
(C) Copyright 2014 Hewlett-Packard Development Company, L.P.<BR>
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2018, AMD Incorporated. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <Base.h>
#include <IndustryStandard/Pci.h>
#include <Library/SerialPortLib.h>
#include <Library/PcdLib.h>
#include <Library/IoLib.h>
#include <Library/PciLib.h>
#include <Library/PlatformHookLib.h>
#include <Library/BaseLib.h>
//
// PCI Defintions.
//
#define PCI_BRIDGE_32_BIT_IO_SPACE 0x01
//
// 16550 UART register offsets and bitfields
//
#define R_UART_RXBUF 0 // LCR_DLAB = 0
#define R_UART_TXBUF 0 // LCR_DLAB = 0
#define R_UART_BAUD_LOW 0 // LCR_DLAB = 1
#define R_UART_BAUD_HIGH 1 // LCR_DLAB = 1
#define R_UART_IER 1 // LCR_DLAB = 0
#define R_UART_FCR 2
#define B_UART_FCR_FIFOE BIT0
#define B_UART_FCR_FIFO64 BIT5
#define R_UART_LCR 3
#define B_UART_LCR_DLAB BIT7
#define R_UART_MCR 4
#define B_UART_MCR_DTRC BIT0
#define B_UART_MCR_RTS BIT1
#define R_UART_LSR 5
#define B_UART_LSR_RXRDY BIT0
#define B_UART_LSR_TXRDY BIT5
#define B_UART_LSR_TEMT BIT6
#define R_UART_MSR 6
#define B_UART_MSR_CTS BIT4
#define B_UART_MSR_DSR BIT5
#define B_UART_MSR_RI BIT6
#define B_UART_MSR_DCD BIT7
//
// 4-byte structure for each PCI node in PcdSerialPciDeviceInfo
//
typedef struct {
UINT8 Device;
UINT8 Function;
UINT16 PowerManagementStatusAndControlRegister;
} PCI_UART_DEVICE_INFO;
/**
Read an 8-bit 16550 register. If PcdSerialUseMmio is TRUE, then the value is read from
MMIO space. If PcdSerialUseMmio is FALSE, then the value is read from I/O space. The
parameter Offset is added to the base address of the 16550 registers that is specified
by PcdSerialRegisterBase.
@param Base The base address register of UART device.
@param Offset The offset of the 16550 register to read.
@return The value read from the 16550 register.
**/
UINT8
SerialPortReadRegister (
UINTN Base,
UINTN Offset
)
{
if (PcdGetBool (PcdSerialUseMmio)) {
return MmioRead8 (Base + Offset * PcdGet32 (PcdSerialRegisterStride));
} else {
return IoRead8 (Base + Offset * PcdGet32 (PcdSerialRegisterStride));
}
}
/**
Write an 8-bit 16550 register. If PcdSerialUseMmio is TRUE, then the value is written to
MMIO space. If PcdSerialUseMmio is FALSE, then the value is written to I/O space. The
parameter Offset is added to the base address of the 16550 registers that is specified
by PcdSerialRegisterBase.
@param Base The base address register of UART device.
@param Offset The offset of the 16550 register to write.
@param Value The value to write to the 16550 register specified by Offset.
@return The value written to the 16550 register.
**/
UINT8
SerialPortWriteRegister (
UINTN Base,
UINTN Offset,
UINT8 Value
)
{
if (PcdGetBool (PcdSerialUseMmio)) {
return MmioWrite8 (Base + Offset * PcdGet32 (PcdSerialRegisterStride), Value);
} else {
return IoWrite8 (Base + Offset * PcdGet32 (PcdSerialRegisterStride), Value);
}
}
/**
Update the value of an 16-bit PCI configuration register in a PCI device. If the
PCI Configuration register specified by PciAddress is already programmed with a
non-zero value, then return the current value. Otherwise update the PCI configuration
register specified by PciAddress with the value specified by Value and return the
value programmed into the PCI configuration register. All values must be masked
using the bitmask specified by Mask.
@param PciAddress PCI Library address of the PCI Configuration register to update.
@param Value The value to program into the PCI Configuration Register.
@param Mask Bitmask of the bits to check and update in the PCI configuration register.
**/
UINT16
SerialPortLibUpdatePciRegister16 (
UINTN PciAddress,
UINT16 Value,
UINT16 Mask
)
{
UINT16 CurrentValue;
CurrentValue = PciRead16 (PciAddress) & Mask;
if (CurrentValue != 0) {
return CurrentValue;
}
return PciWrite16 (PciAddress, Value & Mask);
}
/**
Update the value of an 32-bit PCI configuration register in a PCI device. If the
PCI Configuration register specified by PciAddress is already programmed with a
non-zero value, then return the current value. Otherwise update the PCI configuration
register specified by PciAddress with the value specified by Value and return the
value programmed into the PCI configuration register. All values must be masked
using the bitmask specified by Mask.
@param PciAddress PCI Library address of the PCI Configuration register to update.
@param Value The value to program into the PCI Configuration Register.
@param Mask Bitmask of the bits to check and update in the PCI configuration register.
@return The Secondary bus number that is actually programed into the PCI to PCI Bridge device.
**/
UINT32
SerialPortLibUpdatePciRegister32 (
UINTN PciAddress,
UINT32 Value,
UINT32 Mask
)
{
UINT32 CurrentValue;
CurrentValue = PciRead32 (PciAddress) & Mask;
if (CurrentValue != 0) {
return CurrentValue;
}
return PciWrite32 (PciAddress, Value & Mask);
}
/**
Retrieve the I/O or MMIO base address register for the PCI UART device.
This function assumes Root Bus Numer is Zero, and enables I/O and MMIO in PCI UART
Device if they are not already enabled.
@return The base address register of the UART device.
**/
UINTN
GetSerialRegisterBase (
VOID
)
{
UINTN PciLibAddress;
UINTN BusNumber;
UINTN SubordinateBusNumber;
UINT32 ParentIoBase;
UINT32 ParentIoLimit;
UINT16 ParentMemoryBase;
UINT16 ParentMemoryLimit;
UINT32 IoBase;
UINT32 IoLimit;
UINT16 MemoryBase;
UINT16 MemoryLimit;
UINTN SerialRegisterBase;
UINTN BarIndex;
UINT32 RegisterBaseMask;
PCI_UART_DEVICE_INFO *DeviceInfo;
//
// Get PCI Device Info
//
DeviceInfo = (PCI_UART_DEVICE_INFO *) PcdGetPtr (PcdSerialPciDeviceInfo);
//
// If PCI Device Info is empty, then assume fixed address UART and return PcdSerialRegisterBase
//
if (DeviceInfo->Device == 0xff) {
return (UINTN)PcdGet64 (PcdSerialRegisterBase);
}
//
// Assume PCI Bus 0 I/O window is 0-64KB and MMIO windows is 0-4GB
//
ParentMemoryBase = 0 >> 16;
ParentMemoryLimit = 0xfff00000 >> 16;
ParentIoBase = 0 >> 12;
ParentIoLimit = 0xf000 >> 12;
//
// Enable I/O and MMIO in PCI Bridge
// Assume Root Bus Numer is Zero.
//
for (BusNumber = 0; (DeviceInfo + 1)->Device != 0xff; DeviceInfo++) {
//
// Compute PCI Lib Address to PCI to PCI Bridge
//
PciLibAddress = PCI_LIB_ADDRESS (BusNumber, DeviceInfo->Device, DeviceInfo->Function, 0);
//
// Retrieve and verify the bus numbers in the PCI to PCI Bridge
//
BusNumber = PciRead8 (PciLibAddress + PCI_BRIDGE_SECONDARY_BUS_REGISTER_OFFSET);
SubordinateBusNumber = PciRead8 (PciLibAddress + PCI_BRIDGE_SUBORDINATE_BUS_REGISTER_OFFSET);
if (BusNumber == 0 || BusNumber > SubordinateBusNumber) {
return 0;
}
//
// Retrieve and verify the I/O or MMIO decode window in the PCI to PCI Bridge
//
if (PcdGetBool (PcdSerialUseMmio)) {
MemoryLimit = PciRead16 (PciLibAddress + OFFSET_OF (PCI_TYPE01, Bridge.MemoryLimit)) & 0xfff0;
MemoryBase = PciRead16 (PciLibAddress + OFFSET_OF (PCI_TYPE01, Bridge.MemoryBase)) & 0xfff0;
//
// If PCI Bridge MMIO window is disabled, then return 0
//
if (MemoryLimit < MemoryBase) {
return 0;
}
//
// If PCI Bridge MMIO window is not in the address range decoded by the parent PCI Bridge, then return 0
//
if (MemoryBase < ParentMemoryBase || MemoryBase > ParentMemoryLimit || MemoryLimit > ParentMemoryLimit) {
return 0;
}
ParentMemoryBase = MemoryBase;
ParentMemoryLimit = MemoryLimit;
} else {
IoLimit = PciRead8 (PciLibAddress + OFFSET_OF (PCI_TYPE01, Bridge.IoLimit));
if ((IoLimit & PCI_BRIDGE_32_BIT_IO_SPACE ) == 0) {
IoLimit = IoLimit >> 4;
} else {
IoLimit = (PciRead16 (PciLibAddress + OFFSET_OF (PCI_TYPE01, Bridge.IoLimitUpper16)) << 4) | (IoLimit >> 4);
}
IoBase = PciRead8 (PciLibAddress + OFFSET_OF (PCI_TYPE01, Bridge.IoBase));
if ((IoBase & PCI_BRIDGE_32_BIT_IO_SPACE ) == 0) {
IoBase = IoBase >> 4;
} else {
IoBase = (PciRead16 (PciLibAddress + OFFSET_OF (PCI_TYPE01, Bridge.IoBaseUpper16)) << 4) | (IoBase >> 4);
}
//
// If PCI Bridge I/O window is disabled, then return 0
//
if (IoLimit < IoBase) {
return 0;
}
//
// If PCI Bridge I/O window is not in the address range decoded by the parent PCI Bridge, then return 0
//
if (IoBase < ParentIoBase || IoBase > ParentIoLimit || IoLimit > ParentIoLimit) {
return 0;
}
ParentIoBase = IoBase;
ParentIoLimit = IoLimit;
}
}
//
// Compute PCI Lib Address to PCI UART
//
PciLibAddress = PCI_LIB_ADDRESS (BusNumber, DeviceInfo->Device, DeviceInfo->Function, 0);
//
// Find the first IO or MMIO BAR
//
RegisterBaseMask = 0xFFFFFFF0;
for (BarIndex = 0; BarIndex < PCI_MAX_BAR; BarIndex ++) {
SerialRegisterBase = PciRead32 (PciLibAddress + PCI_BASE_ADDRESSREG_OFFSET + BarIndex * 4);
if (PcdGetBool (PcdSerialUseMmio) && ((SerialRegisterBase & BIT0) == 0)) {
//
// MMIO BAR is found
//
RegisterBaseMask = 0xFFFFFFF0;
break;
}
if ((!PcdGetBool (PcdSerialUseMmio)) && ((SerialRegisterBase & BIT0) != 0)) {
//
// IO BAR is found
//
RegisterBaseMask = 0xFFFFFFF8;
break;
}
}
//
// MMIO or IO BAR is not found.
//
if (BarIndex == PCI_MAX_BAR) {
return 0;
}
//
// Program UART BAR
//
SerialRegisterBase = SerialPortLibUpdatePciRegister32 (
PciLibAddress + PCI_BASE_ADDRESSREG_OFFSET + BarIndex * 4,
(UINT32)PcdGet64 (PcdSerialRegisterBase),
RegisterBaseMask
);
//
// Verify that the UART BAR is in the address range decoded by the parent PCI Bridge
//
if (PcdGetBool (PcdSerialUseMmio)) {
if (((SerialRegisterBase >> 16) & 0xfff0) < ParentMemoryBase || ((SerialRegisterBase >> 16) & 0xfff0) > ParentMemoryLimit) {
return 0;
}
} else {
if ((SerialRegisterBase >> 12) < ParentIoBase || (SerialRegisterBase >> 12) > ParentIoLimit) {
return 0;
}
}
//
// Enable I/O and MMIO in PCI UART Device if they are not already enabled
//
PciOr16 (
PciLibAddress + PCI_COMMAND_OFFSET,
PcdGetBool (PcdSerialUseMmio) ? EFI_PCI_COMMAND_MEMORY_SPACE : EFI_PCI_COMMAND_IO_SPACE
);
//
// Force D0 state if a Power Management and Status Register is specified
//
if (DeviceInfo->PowerManagementStatusAndControlRegister != 0x00) {
if ((PciRead16 (PciLibAddress + DeviceInfo->PowerManagementStatusAndControlRegister) & (BIT0 | BIT1)) != 0x00) {
PciAnd16 (PciLibAddress + DeviceInfo->PowerManagementStatusAndControlRegister, (UINT16)~(BIT0 | BIT1));
//
// If PCI UART was not in D0, then make sure FIFOs are enabled, but do not reset FIFOs
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_FCR, (UINT8)(PcdGet8 (PcdSerialFifoControl) & (B_UART_FCR_FIFOE | B_UART_FCR_FIFO64)));
}
}
//
// Get PCI Device Info
//
DeviceInfo = (PCI_UART_DEVICE_INFO *) PcdGetPtr (PcdSerialPciDeviceInfo);
//
// Enable I/O or MMIO in PCI Bridge
// Assume Root Bus Numer is Zero.
//
for (BusNumber = 0; (DeviceInfo + 1)->Device != 0xff; DeviceInfo++) {
//
// Compute PCI Lib Address to PCI to PCI Bridge
//
PciLibAddress = PCI_LIB_ADDRESS (BusNumber, DeviceInfo->Device, DeviceInfo->Function, 0);
//
// Enable the I/O or MMIO decode windows in the PCI to PCI Bridge
//
PciOr16 (
PciLibAddress + PCI_COMMAND_OFFSET,
PcdGetBool (PcdSerialUseMmio) ? EFI_PCI_COMMAND_MEMORY_SPACE : EFI_PCI_COMMAND_IO_SPACE
);
//
// Force D0 state if a Power Management and Status Register is specified
//
if (DeviceInfo->PowerManagementStatusAndControlRegister != 0x00) {
if ((PciRead16 (PciLibAddress + DeviceInfo->PowerManagementStatusAndControlRegister) & (BIT0 | BIT1)) != 0x00) {
PciAnd16 (PciLibAddress + DeviceInfo->PowerManagementStatusAndControlRegister, (UINT16)~(BIT0 | BIT1));
}
}
BusNumber = PciRead8 (PciLibAddress + PCI_BRIDGE_SECONDARY_BUS_REGISTER_OFFSET);
}
return SerialRegisterBase;
}
/**
Return whether the hardware flow control signal allows writing.
@param SerialRegisterBase The base address register of UART device.
@retval TRUE The serial port is writable.
@retval FALSE The serial port is not writable.
**/
BOOLEAN
SerialPortWritable (
UINTN SerialRegisterBase
)
{
if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
if (PcdGetBool (PcdSerialDetectCable)) {
//
// Wait for both DSR and CTS to be set
// DSR is set if a cable is connected.
// CTS is set if it is ok to transmit data
//
// DSR CTS Description Action
// === === ======================================== ========
// 0 0 No cable connected. Wait
// 0 1 No cable connected. Wait
// 1 0 Cable connected, but not clear to send. Wait
// 1 1 Cable connected, and clear to send. Transmit
//
return (BOOLEAN) ((SerialPortReadRegister (SerialRegisterBase, R_UART_MSR) & (B_UART_MSR_DSR | B_UART_MSR_CTS)) == (B_UART_MSR_DSR | B_UART_MSR_CTS));
} else {
//
// Wait for both DSR and CTS to be set OR for DSR to be clear.
// DSR is set if a cable is connected.
// CTS is set if it is ok to transmit data
//
// DSR CTS Description Action
// === === ======================================== ========
// 0 0 No cable connected. Transmit
// 0 1 No cable connected. Transmit
// 1 0 Cable connected, but not clear to send. Wait
// 1 1 Cable connected, and clar to send. Transmit
//
return (BOOLEAN) ((SerialPortReadRegister (SerialRegisterBase, R_UART_MSR) & (B_UART_MSR_DSR | B_UART_MSR_CTS)) != (B_UART_MSR_DSR));
}
}
return TRUE;
}
/**
Initialize the serial device hardware.
If no initialization is required, then return RETURN_SUCCESS.
If the serial device was successfully initialized, then return RETURN_SUCCESS.
If the serial device could not be initialized, then return RETURN_DEVICE_ERROR.
@retval RETURN_SUCCESS The serial device was initialized.
@retval RETURN_DEVICE_ERROR The serial device could not be initialized.
**/
RETURN_STATUS
EFIAPI
SerialPortInitialize (
VOID
)
{
RETURN_STATUS Status;
UINTN SerialRegisterBase;
UINT32 Divisor;
UINT32 CurrentDivisor;
BOOLEAN Initialized;
//
// Perform platform specific initialization required to enable use of the 16550 device
// at the location specified by PcdSerialUseMmio and PcdSerialRegisterBase.
//
Status = PlatformHookSerialPortInitialize ();
if (RETURN_ERROR (Status)) {
return Status;
}
//
// Calculate divisor for baud generator
// Ref_Clk_Rate / Baud_Rate / 16
//
Divisor = PcdGet32 (PcdSerialClockRate) / (PcdGet32 (PcdSerialBaudRate) * 16);
if ((PcdGet32 (PcdSerialClockRate) % (PcdGet32 (PcdSerialBaudRate) * 16)) >= PcdGet32 (PcdSerialBaudRate) * 8) {
Divisor++;
}
//
// Get the base address of the serial port in either I/O or MMIO space
//
SerialRegisterBase = GetSerialRegisterBase ();
if (SerialRegisterBase ==0) {
return RETURN_DEVICE_ERROR;
}
//
// See if the serial port is already initialized
//
Initialized = TRUE;
if ((SerialPortReadRegister (SerialRegisterBase, R_UART_LCR) & 0x3F) != (PcdGet8 (PcdSerialLineControl) & 0x3F)) {
Initialized = FALSE;
}
SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, (UINT8)(SerialPortReadRegister (SerialRegisterBase, R_UART_LCR) | B_UART_LCR_DLAB));
CurrentDivisor = SerialPortReadRegister (SerialRegisterBase, R_UART_BAUD_HIGH) << 8;
CurrentDivisor |= (UINT32) SerialPortReadRegister (SerialRegisterBase, R_UART_BAUD_LOW);
SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, (UINT8)(SerialPortReadRegister (SerialRegisterBase, R_UART_LCR) & ~B_UART_LCR_DLAB));
if (CurrentDivisor != Divisor) {
Initialized = FALSE;
}
if (Initialized) {
return RETURN_SUCCESS;
}
//
// Wait for the serial port to be ready.
// Verify that both the transmit FIFO and the shift register are empty.
//
while ((SerialPortReadRegister (SerialRegisterBase, R_UART_LSR) & (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) != (B_UART_LSR_TEMT | B_UART_LSR_TXRDY));
//
// Configure baud rate
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, B_UART_LCR_DLAB);
SerialPortWriteRegister (SerialRegisterBase, R_UART_BAUD_HIGH, (UINT8) (Divisor >> 8));
SerialPortWriteRegister (SerialRegisterBase, R_UART_BAUD_LOW, (UINT8) (Divisor & 0xff));
//
// Clear DLAB and configure Data Bits, Parity, and Stop Bits.
// Strip reserved bits from PcdSerialLineControl
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, (UINT8)(PcdGet8 (PcdSerialLineControl) & 0x3F));
//
// Enable and reset FIFOs
// Strip reserved bits from PcdSerialFifoControl
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_FCR, 0x00);
SerialPortWriteRegister (SerialRegisterBase, R_UART_FCR, (UINT8)(PcdGet8 (PcdSerialFifoControl) & (B_UART_FCR_FIFOE | B_UART_FCR_FIFO64)));
//
// Set FIFO Polled Mode by clearing IER after setting FCR
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_IER, 0x00);
//
// Put Modem Control Register(MCR) into its reset state of 0x00.
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, 0x00);
return RETURN_SUCCESS;
}
/**
Write data from buffer to serial device.
Writes NumberOfBytes data bytes from Buffer to the serial device.
The number of bytes actually written to the serial device is returned.
If the return value is less than NumberOfBytes, then the write operation failed.
If Buffer is NULL, then ASSERT().
If NumberOfBytes is zero, then return 0.
@param Buffer Pointer to the data buffer to be written.
@param NumberOfBytes Number of bytes to written to the serial device.
@retval 0 NumberOfBytes is 0.
@retval >0 The number of bytes written to the serial device.
If this value is less than NumberOfBytes, then the write operation failed.
**/
UINTN
EFIAPI
SerialPortWrite (
IN UINT8 *Buffer,
IN UINTN NumberOfBytes
)
{
UINTN SerialRegisterBase;
UINTN Result;
UINTN Index;
UINTN FifoSize;
if (Buffer == NULL) {
return 0;
}
SerialRegisterBase = GetSerialRegisterBase ();
if (SerialRegisterBase ==0) {
return 0;
}
if (NumberOfBytes == 0) {
//
// Flush the hardware
//
//
// Wait for both the transmit FIFO and shift register empty.
//
while ((SerialPortReadRegister (SerialRegisterBase, R_UART_LSR) & (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) != (B_UART_LSR_TEMT | B_UART_LSR_TXRDY));
//
// Wait for the hardware flow control signal
//
while (!SerialPortWritable (SerialRegisterBase));
return 0;
}
//
// Compute the maximum size of the Tx FIFO
//
FifoSize = 1;
if ((PcdGet8 (PcdSerialFifoControl) & B_UART_FCR_FIFOE) != 0) {
if ((PcdGet8 (PcdSerialFifoControl) & B_UART_FCR_FIFO64) == 0) {
FifoSize = 16;
} else {
FifoSize = PcdGet32 (PcdSerialExtendedTxFifoSize);
}
}
Result = NumberOfBytes;
while (NumberOfBytes != 0) {
//
// Wait for the serial port to be ready, to make sure both the transmit FIFO
// and shift register empty.
//
while ((SerialPortReadRegister (SerialRegisterBase, R_UART_LSR) & B_UART_LSR_TEMT) == 0);
//
// Fill then entire Tx FIFO
//
for (Index = 0; Index < FifoSize && NumberOfBytes != 0; Index++, NumberOfBytes--, Buffer++) {
//
// Wait for the hardware flow control signal
//
while (!SerialPortWritable (SerialRegisterBase));
//
// Write byte to the transmit buffer.
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_TXBUF, *Buffer);
}
}
return Result;
}
/**
Reads data from a serial device into a buffer.
@param Buffer Pointer to the data buffer to store the data read from the serial device.
@param NumberOfBytes Number of bytes to read from the serial device.
@retval 0 NumberOfBytes is 0.
@retval >0 The number of bytes read from the serial device.
If this value is less than NumberOfBytes, then the read operation failed.
**/
UINTN
EFIAPI
SerialPortRead (
OUT UINT8 *Buffer,
IN UINTN NumberOfBytes
)
{
UINTN SerialRegisterBase;
UINTN Result;
UINT8 Mcr;
if (NULL == Buffer) {
return 0;
}
SerialRegisterBase = GetSerialRegisterBase ();
if (SerialRegisterBase ==0) {
return 0;
}
Mcr = (UINT8)(SerialPortReadRegister (SerialRegisterBase, R_UART_MCR) & ~B_UART_MCR_RTS);
for (Result = 0; NumberOfBytes-- != 0; Result++, Buffer++) {
//
// Wait for the serial port to have some data.
//
while ((SerialPortReadRegister (SerialRegisterBase, R_UART_LSR) & B_UART_LSR_RXRDY) == 0) {
if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
//
// Set RTS to let the peer send some data
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, (UINT8)(Mcr | B_UART_MCR_RTS));
}
}
if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
//
// Clear RTS to prevent peer from sending data
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, Mcr);
}
//
// Read byte from the receive buffer.
//
*Buffer = SerialPortReadRegister (SerialRegisterBase, R_UART_RXBUF);
}
return Result;
}
/**
Polls a serial device to see if there is any data waiting to be read.
Polls aserial device to see if there is any data waiting to be read.
If there is data waiting to be read from the serial device, then TRUE is returned.
If there is no data waiting to be read from the serial device, then FALSE is returned.
@retval TRUE Data is waiting to be read from the serial device.
@retval FALSE There is no data waiting to be read from the serial device.
**/
BOOLEAN
EFIAPI
SerialPortPoll (
VOID
)
{
UINTN SerialRegisterBase;
SerialRegisterBase = GetSerialRegisterBase ();
if (SerialRegisterBase ==0) {
return FALSE;
}
//
// Read the serial port status
//
if ((SerialPortReadRegister (SerialRegisterBase, R_UART_LSR) & B_UART_LSR_RXRDY) != 0) {
if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
//
// Clear RTS to prevent peer from sending data
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, (UINT8)(SerialPortReadRegister (SerialRegisterBase, R_UART_MCR) & ~B_UART_MCR_RTS));
}
return TRUE;
}
if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
//
// Set RTS to let the peer send some data
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, (UINT8)(SerialPortReadRegister (SerialRegisterBase, R_UART_MCR) | B_UART_MCR_RTS));
}
return FALSE;
}
/**
Sets the control bits on a serial device.
@param Control Sets the bits of Control that are settable.
@retval RETURN_SUCCESS The new control bits were set on the serial device.
@retval RETURN_UNSUPPORTED The serial device does not support this operation.
@retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
**/
RETURN_STATUS
EFIAPI
SerialPortSetControl (
IN UINT32 Control
)
{
UINTN SerialRegisterBase;
UINT8 Mcr;
//
// First determine the parameter is invalid.
//
if ((Control & (~(EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY |
EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE))) != 0) {
return RETURN_UNSUPPORTED;
}
SerialRegisterBase = GetSerialRegisterBase ();
if (SerialRegisterBase ==0) {
return RETURN_UNSUPPORTED;
}
//
// Read the Modem Control Register.
//
Mcr = SerialPortReadRegister (SerialRegisterBase, R_UART_MCR);
Mcr &= (~(B_UART_MCR_DTRC | B_UART_MCR_RTS));
if ((Control & EFI_SERIAL_DATA_TERMINAL_READY) == EFI_SERIAL_DATA_TERMINAL_READY) {
Mcr |= B_UART_MCR_DTRC;
}
if ((Control & EFI_SERIAL_REQUEST_TO_SEND) == EFI_SERIAL_REQUEST_TO_SEND) {
Mcr |= B_UART_MCR_RTS;
}
//
// Write the Modem Control Register.
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_MCR, Mcr);
return RETURN_SUCCESS;
}
/**
Retrieve the status of the control bits on a serial device.
@param Control A pointer to return the current control signals from the serial device.
@retval RETURN_SUCCESS The control bits were read from the serial device.
@retval RETURN_UNSUPPORTED The serial device does not support this operation.
@retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
**/
RETURN_STATUS
EFIAPI
SerialPortGetControl (
OUT UINT32 *Control
)
{
UINTN SerialRegisterBase;
UINT8 Msr;
UINT8 Mcr;
UINT8 Lsr;
SerialRegisterBase = GetSerialRegisterBase ();
if (SerialRegisterBase ==0) {
return RETURN_UNSUPPORTED;
}
*Control = 0;
//
// Read the Modem Status Register.
//
Msr = SerialPortReadRegister (SerialRegisterBase, R_UART_MSR);
if ((Msr & B_UART_MSR_CTS) == B_UART_MSR_CTS) {
*Control |= EFI_SERIAL_CLEAR_TO_SEND;
}
if ((Msr & B_UART_MSR_DSR) == B_UART_MSR_DSR) {
*Control |= EFI_SERIAL_DATA_SET_READY;
}
if ((Msr & B_UART_MSR_RI) == B_UART_MSR_RI) {
*Control |= EFI_SERIAL_RING_INDICATE;
}
if ((Msr & B_UART_MSR_DCD) == B_UART_MSR_DCD) {
*Control |= EFI_SERIAL_CARRIER_DETECT;
}
//
// Read the Modem Control Register.
//
Mcr = SerialPortReadRegister (SerialRegisterBase, R_UART_MCR);
if ((Mcr & B_UART_MCR_DTRC) == B_UART_MCR_DTRC) {
*Control |= EFI_SERIAL_DATA_TERMINAL_READY;
}
if ((Mcr & B_UART_MCR_RTS) == B_UART_MCR_RTS) {
*Control |= EFI_SERIAL_REQUEST_TO_SEND;
}
if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
*Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
}
//
// Read the Line Status Register.
//
Lsr = SerialPortReadRegister (SerialRegisterBase, R_UART_LSR);
if ((Lsr & (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) == (B_UART_LSR_TEMT | B_UART_LSR_TXRDY)) {
*Control |= EFI_SERIAL_OUTPUT_BUFFER_EMPTY;
}
if ((Lsr & B_UART_LSR_RXRDY) == 0) {
*Control |= EFI_SERIAL_INPUT_BUFFER_EMPTY;
}
return RETURN_SUCCESS;
}
/**
Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
data bits, and stop bits on a serial device.
@param BaudRate The requested baud rate. A BaudRate value of 0 will use the
device's default interface speed.
On output, the value actually set.
@param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
serial interface. A ReceiveFifoDepth value of 0 will use
the device's default FIFO depth.
On output, the value actually set.
@param Timeout The requested time out for a single character in microseconds.
This timeout applies to both the transmit and receive side of the
interface. A Timeout value of 0 will use the device's default time
out value.
On output, the value actually set.
@param Parity The type of parity to use on this serial device. A Parity value of
DefaultParity will use the device's default parity value.
On output, the value actually set.
@param DataBits The number of data bits to use on the serial device. A DataBits
vaule of 0 will use the device's default data bit setting.
On output, the value actually set.
@param StopBits The number of stop bits to use on this serial device. A StopBits
value of DefaultStopBits will use the device's default number of
stop bits.
On output, the value actually set.
@retval RETURN_SUCCESS The new attributes were set on the serial device.
@retval RETURN_UNSUPPORTED The serial device does not support this operation.
@retval RETURN_INVALID_PARAMETER One or more of the attributes has an unsupported value.
@retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
**/
RETURN_STATUS
EFIAPI
SerialPortSetAttributes (
IN OUT UINT64 *BaudRate,
IN OUT UINT32 *ReceiveFifoDepth,
IN OUT UINT32 *Timeout,
IN OUT EFI_PARITY_TYPE *Parity,
IN OUT UINT8 *DataBits,
IN OUT EFI_STOP_BITS_TYPE *StopBits
)
{
UINTN SerialRegisterBase;
UINT32 SerialBaudRate;
UINTN Divisor;
UINT8 Lcr;
UINT8 LcrData;
UINT8 LcrParity;
UINT8 LcrStop;
SerialRegisterBase = GetSerialRegisterBase ();
if (SerialRegisterBase ==0) {
return RETURN_UNSUPPORTED;
}
//
// Check for default settings and fill in actual values.
//
if (*BaudRate == 0) {
*BaudRate = PcdGet32 (PcdSerialBaudRate);
}
SerialBaudRate = (UINT32) *BaudRate;
if (*DataBits == 0) {
LcrData = (UINT8) (PcdGet8 (PcdSerialLineControl) & 0x3);
*DataBits = LcrData + 5;
} else {
if ((*DataBits < 5) || (*DataBits > 8)) {
return RETURN_INVALID_PARAMETER;
}
//
// Map 5..8 to 0..3
//
LcrData = (UINT8) (*DataBits - (UINT8) 5);
}
if (*Parity == DefaultParity) {
LcrParity = (UINT8) ((PcdGet8 (PcdSerialLineControl) >> 3) & 0x7);
switch (LcrParity) {
case 0:
*Parity = NoParity;
break;
case 3:
*Parity = EvenParity;
break;
case 1:
*Parity = OddParity;
break;
case 7:
*Parity = SpaceParity;
break;
case 5:
*Parity = MarkParity;
break;
default:
break;
}
} else {
switch (*Parity) {
case NoParity:
LcrParity = 0;
break;
case EvenParity:
LcrParity = 3;
break;
case OddParity:
LcrParity = 1;
break;
case SpaceParity:
LcrParity = 7;
break;
case MarkParity:
LcrParity = 5;
break;
default:
return RETURN_INVALID_PARAMETER;
}
}
if (*StopBits == DefaultStopBits) {
LcrStop = (UINT8) ((PcdGet8 (PcdSerialLineControl) >> 2) & 0x1);
switch (LcrStop) {
case 0:
*StopBits = OneStopBit;
break;
case 1:
if (*DataBits == 5) {
*StopBits = OneFiveStopBits;
} else {
*StopBits = TwoStopBits;
}
break;
default:
break;
}
} else {
switch (*StopBits) {
case OneStopBit:
LcrStop = 0;
break;
case OneFiveStopBits:
case TwoStopBits:
LcrStop = 1;
break;
default:
return RETURN_INVALID_PARAMETER;
}
}
//
// Calculate divisor for baud generator
// Ref_Clk_Rate / Baud_Rate / 16
//
Divisor = PcdGet32 (PcdSerialClockRate) / (SerialBaudRate * 16);
if ((PcdGet32 (PcdSerialClockRate) % (SerialBaudRate * 16)) >= SerialBaudRate * 8) {
Divisor++;
}
//
// Configure baud rate
//
SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, B_UART_LCR_DLAB);
SerialPortWriteRegister (SerialRegisterBase, R_UART_BAUD_HIGH, (UINT8) (Divisor >> 8));
SerialPortWriteRegister (SerialRegisterBase, R_UART_BAUD_LOW, (UINT8) (Divisor & 0xff));
//
// Clear DLAB and configure Data Bits, Parity, and Stop Bits.
// Strip reserved bits from line control value
//
Lcr = (UINT8) ((LcrParity << 3) | (LcrStop << 2) | LcrData);
SerialPortWriteRegister (SerialRegisterBase, R_UART_LCR, (UINT8) (Lcr & 0x3F));
return RETURN_SUCCESS;
}
Reference in New Issue View Git Blame Copy Permalink