audk/MdeModulePkg/Library/DxeUdpIoLib/DxeUdpIoLib.c

811 lines
20 KiB
C

/** @file
Copyright (c) 2006 - 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
Udp4Io.c
Abstract:
Help functions to access UDP service, it is used by both the DHCP and MTFTP.
**/
#include <PiDxe.h>
#include <Protocol/Udp4.h>
#include <Library/UdpIoLib.h>
#include <Library/BaseLib.h>
#include <Library/DebugLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/BaseMemoryLib.h>
STATIC
VOID
EFIAPI
UdpIoOnDgramSentDpc (
IN VOID *Context
);
STATIC
VOID
EFIAPI
UdpIoOnDgramSent (
IN EFI_EVENT Event,
IN VOID *Context
);
STATIC
VOID
EFIAPI
UdpIoOnDgramRcvd (
IN EFI_EVENT Event,
IN VOID *Context
);
/**
Wrap a transmit request into a UDP_TX_TOKEN.
@param UdpIo The UdpIo port to send packet to
@param Packet The user's packet
@param EndPoint The local and remote access point
@param Gateway The overrided next hop
@param CallBack The function to call when transmission completed.
@param Context The opaque parameter to the call back
@return The wrapped transmission request or NULL if failed to allocate resources.
**/
STATIC
UDP_TX_TOKEN *
UdpIoWrapTx (
IN UDP_IO_PORT *UdpIo,
IN NET_BUF *Packet,
IN UDP_POINTS *EndPoint, OPTIONAL
IN IP4_ADDR Gateway,
IN UDP_IO_CALLBACK CallBack,
IN VOID *Context
)
{
UDP_TX_TOKEN *Token;
EFI_UDP4_COMPLETION_TOKEN *UdpToken;
EFI_UDP4_TRANSMIT_DATA *UdpTxData;
EFI_STATUS Status;
UINT32 Count;
IP4_ADDR Ip;
Token = AllocatePool (sizeof (UDP_TX_TOKEN) +
sizeof (EFI_UDP4_FRAGMENT_DATA) * (Packet->BlockOpNum - 1));
if (Token == NULL) {
return NULL;
}
Token->Signature = UDP_IO_TX_SIGNATURE;
InitializeListHead (&Token->Link);
Token->UdpIo = UdpIo;
Token->CallBack = CallBack;
Token->Packet = Packet;
Token->Context = Context;
UdpToken = &(Token->UdpToken);
UdpToken->Status = EFI_NOT_READY;
Status = gBS->CreateEvent (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
UdpIoOnDgramSent,
Token,
&UdpToken->Event
);
if (EFI_ERROR (Status)) {
gBS->FreePool (Token);
return NULL;
}
UdpTxData = &Token->UdpTxData;
UdpToken->Packet.TxData = UdpTxData;
UdpTxData->UdpSessionData = NULL;
UdpTxData->GatewayAddress = NULL;
if (EndPoint != NULL) {
Ip = HTONL (EndPoint->LocalAddr);
CopyMem (&Token->UdpSession.SourceAddress, &Ip, sizeof (EFI_IPv4_ADDRESS));
Ip = HTONL (EndPoint->RemoteAddr);
CopyMem (&Token->UdpSession.DestinationAddress, &Ip, sizeof (EFI_IPv4_ADDRESS));
Token->UdpSession.SourcePort = EndPoint->LocalPort;
Token->UdpSession.DestinationPort = EndPoint->RemotePort;
UdpTxData->UdpSessionData = &Token->UdpSession;
}
if (Gateway != 0) {
Ip = HTONL (Gateway);
CopyMem (&Token->Gateway, &Ip, sizeof (EFI_IPv4_ADDRESS));
UdpTxData->GatewayAddress = &Token->Gateway;
}
UdpTxData->DataLength = Packet->TotalSize;
Count = Packet->BlockOpNum;
NetbufBuildExt (Packet, (NET_FRAGMENT *) UdpTxData->FragmentTable, &Count);
UdpTxData->FragmentCount = Count;
return Token;
}
/**
Free a UDP_TX_TOKEN. The event is closed and memory released.
@param Token The UDP_TX_TOKEN to release.
@return None
**/
VOID
UdpIoFreeTxToken (
IN UDP_TX_TOKEN *Token
)
{
gBS->CloseEvent (Token->UdpToken.Event);
gBS->FreePool (Token);
}
/**
Create a UDP_RX_TOKEN to wrap the request.
@param UdpIo The UdpIo to receive packets from
@param CallBack The function to call when receive finished.
@param Context The opaque parameter to the CallBack
@param HeadLen The head length to reserver for the packet.
@return The Wrapped request or NULL if failed to allocate resources.
**/
UDP_RX_TOKEN *
UdpIoCreateRxToken (
IN UDP_IO_PORT *UdpIo,
IN UDP_IO_CALLBACK CallBack,
IN VOID *Context,
IN UINT32 HeadLen
)
{
UDP_RX_TOKEN *Token;
EFI_STATUS Status;
Token = AllocatePool (sizeof (UDP_RX_TOKEN));
if (Token == NULL) {
return NULL;
}
Token->Signature = UDP_IO_RX_SIGNATURE;
Token->UdpIo = UdpIo;
Token->CallBack = CallBack;
Token->Context = Context;
Token->HeadLen = HeadLen;
Token->UdpToken.Status = EFI_NOT_READY;
Token->UdpToken.Packet.RxData = NULL;
Status = gBS->CreateEvent (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
UdpIoOnDgramRcvd,
Token,
&Token->UdpToken.Event
);
if (EFI_ERROR (Status)) {
gBS->FreePool (Token);
return NULL;
}
return Token;
}
/**
Free a receive request wrap.
@param Token The receive request to release.
@return None
**/
VOID
UdpIoFreeRxToken (
IN UDP_RX_TOKEN *Token
)
{
gBS->CloseEvent (Token->UdpToken.Event);
gBS->FreePool (Token);
}
/**
Create a UDP IO port to access the UDP service. It will
create and configure a UDP child.
@param Controller The controller that has the UDP service binding
protocol installed.
@param Image The image handle for the driver.
@param Configure The function to configure the created UDP child
@param Context The opaque parameter for the Configure funtion.
@return A point to just created UDP IO port or NULL if failed.
**/
UDP_IO_PORT *
EFIAPI
UdpIoCreatePort (
IN EFI_HANDLE Controller,
IN EFI_HANDLE Image,
IN UDP_IO_CONFIG Configure,
IN VOID *Context
)
{
UDP_IO_PORT *UdpIo;
EFI_STATUS Status;
ASSERT (Configure != NULL);
UdpIo = AllocatePool (sizeof (UDP_IO_PORT));
if (UdpIo == NULL) {
return NULL;
}
UdpIo->Signature = UDP_IO_SIGNATURE;
InitializeListHead (&UdpIo->Link);
UdpIo->RefCnt = 1;
UdpIo->Controller = Controller;
UdpIo->Image = Image;
InitializeListHead (&UdpIo->SentDatagram);
UdpIo->RecvRequest = NULL;
UdpIo->UdpHandle = NULL;
//
// Create a UDP child then open and configure it
//
Status = NetLibCreateServiceChild (
Controller,
Image,
&gEfiUdp4ServiceBindingProtocolGuid,
&UdpIo->UdpHandle
);
if (EFI_ERROR (Status)) {
goto FREE_MEM;
}
Status = gBS->OpenProtocol (
UdpIo->UdpHandle,
&gEfiUdp4ProtocolGuid,
(VOID **) &UdpIo->Udp,
Image,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
goto FREE_CHILD;
}
if (EFI_ERROR (Configure (UdpIo, Context))) {
goto CLOSE_PROTOCOL;
}
Status = UdpIo->Udp->GetModeData (UdpIo->Udp, NULL, NULL, NULL, &UdpIo->SnpMode);
if (EFI_ERROR (Status)) {
goto CLOSE_PROTOCOL;
}
return UdpIo;
CLOSE_PROTOCOL:
gBS->CloseProtocol (UdpIo->UdpHandle, &gEfiUdp4ProtocolGuid, Image, Controller);
FREE_CHILD:
NetLibDestroyServiceChild (
Controller,
Image,
&gEfiUdp4ServiceBindingProtocolGuid,
UdpIo->UdpHandle
);
FREE_MEM:
gBS->FreePool (UdpIo);
return NULL;
}
/**
Cancel all the sent datagram that pass the selection of ToCancel.
If ToCancel is NULL, all the datagrams are cancelled.
@param UdpIo The UDP IO port to cancel packet
@param IoStatus The IoStatus to return to the packet owners.
@param ToCancel The select funtion to test whether to cancel this
packet or not.
@param Context The opaque parameter to the ToCancel.
@return None
**/
STATIC
VOID
UdpIoCancelDgrams (
IN UDP_IO_PORT *UdpIo,
IN EFI_STATUS IoStatus,
IN UDP_IO_TO_CANCEL ToCancel, OPTIONAL
IN VOID *Context
)
{
LIST_ENTRY *Entry;
LIST_ENTRY *Next;
UDP_TX_TOKEN *Token;
NET_LIST_FOR_EACH_SAFE (Entry, Next, &UdpIo->SentDatagram) {
Token = NET_LIST_USER_STRUCT (Entry, UDP_TX_TOKEN, Link);
if ((ToCancel == NULL) || (ToCancel (Token, Context))) {
UdpIo->Udp->Cancel (UdpIo->Udp, &Token->UdpToken);
}
}
}
/**
Free the UDP IO port and all its related resources including
all the transmitted packet.
@param UdpIo The UDP IO port to free.
@retval EFI_SUCCESS The UDP IO port is freed.
**/
EFI_STATUS
EFIAPI
UdpIoFreePort (
IN UDP_IO_PORT *UdpIo
)
{
UDP_RX_TOKEN *RxToken;
//
// Cancel all the sent datagram and receive requests. The
// callbacks of transmit requests are executed to allow the
// caller to release the resource. The callback of receive
// request are NOT executed. This is because it is most
// likely that the current user of the UDP IO port is closing
// itself.
//
UdpIoCancelDgrams (UdpIo, EFI_ABORTED, NULL, NULL);
if ((RxToken = UdpIo->RecvRequest) != NULL) {
UdpIo->Udp->Cancel (UdpIo->Udp, &RxToken->UdpToken);
}
//
// Close then destory the UDP child
//
gBS->CloseProtocol (
UdpIo->UdpHandle,
&gEfiUdp4ProtocolGuid,
UdpIo->Image,
UdpIo->Controller
);
NetLibDestroyServiceChild (
UdpIo->Controller,
UdpIo->Image,
&gEfiUdp4ServiceBindingProtocolGuid,
UdpIo->UdpHandle
);
if (!IsListEmpty(&UdpIo->Link)) {
RemoveEntryList (&UdpIo->Link);
}
gBS->FreePool (UdpIo);
return EFI_SUCCESS;
}
/**
Clean up the UDP IO port. It will release all the transmitted
datagrams and receive request. It will also configure NULL the
UDP child.
@param UdpIo UDP IO port to clean up.
@return None
**/
VOID
EFIAPI
UdpIoCleanPort (
IN UDP_IO_PORT *UdpIo
)
{
UDP_RX_TOKEN *RxToken;
//
// Cancel all the sent datagram and receive requests.
//
UdpIoCancelDgrams (UdpIo, EFI_ABORTED, NULL, NULL);
if ((RxToken = UdpIo->RecvRequest) != NULL) {
UdpIo->Udp->Cancel (UdpIo->Udp, &RxToken->UdpToken);
}
UdpIo->Udp->Configure (UdpIo->Udp, NULL);
}
/**
The callback function when the packet is sent by UDP.
It will remove the packet from the local list then call
the packet owner's callback function.
@param Context The UDP TX Token.
@return None
**/
STATIC
VOID
EFIAPI
UdpIoOnDgramSentDpc (
IN VOID *Context
)
{
UDP_TX_TOKEN *Token;
Token = (UDP_TX_TOKEN *) Context;
ASSERT (Token->Signature == UDP_IO_TX_SIGNATURE);
RemoveEntryList (&Token->Link);
Token->CallBack (Token->Packet, NULL, Token->UdpToken.Status, Token->Context);
UdpIoFreeTxToken (Token);
}
/**
Request UdpIoOnDgramSentDpc as a DPC at TPL_CALLBACK.
@param Event The event signalled.
@param Context The UDP TX Token.
@return None
**/
STATIC
VOID
EFIAPI
UdpIoOnDgramSent (
IN EFI_EVENT Event,
IN VOID *Context
)
{
//
// Request UdpIoOnDgramSentDpc as a DPC at TPL_CALLBACK
//
NetLibQueueDpc (TPL_CALLBACK, UdpIoOnDgramSentDpc, Context);
}
/**
Send a packet through the UDP IO port.
@param UdpIo The UDP IO Port to send the packet through
@param Packet The packet to send
@param EndPoint The local and remote access point
@param Gateway The gateway to use
@param CallBack The call back function to call when packet is
transmitted or failed.
@param Context The opque parameter to the CallBack
@retval EFI_OUT_OF_RESOURCES Failed to allocate resource for the packet
@retval EFI_SUCCESS The packet is successfully delivered to UDP for
transmission.
**/
EFI_STATUS
EFIAPI
UdpIoSendDatagram (
IN UDP_IO_PORT *UdpIo,
IN NET_BUF *Packet,
IN UDP_POINTS *EndPoint, OPTIONAL
IN IP4_ADDR Gateway,
IN UDP_IO_CALLBACK CallBack,
IN VOID *Context
)
{
UDP_TX_TOKEN *Token;
EFI_STATUS Status;
Token = UdpIoWrapTx (UdpIo, Packet, EndPoint, Gateway, CallBack, Context);
if (Token == NULL) {
return EFI_OUT_OF_RESOURCES;
}
//
// Insert the tx token into SendDatagram list before transmitting it. Remove
// it from the list if the returned status is not EFI_SUCCESS.
//
InsertHeadList (&UdpIo->SentDatagram, &Token->Link);
Status = UdpIo->Udp->Transmit (UdpIo->Udp, &Token->UdpToken);
if (EFI_ERROR (Status)) {
RemoveEntryList (&Token->Link);
UdpIoFreeTxToken (Token);
return Status;
}
return EFI_SUCCESS;
}
/**
The selection function to cancel a single sent datagram.
@param Token The UDP TX token to test againist.
@param Context The context
@return TRUE if the packet is to be cancelled, otherwise FALSE.
**/
STATIC
BOOLEAN
UdpIoCancelSingleDgram (
IN UDP_TX_TOKEN *Token,
IN VOID *Context
)
{
NET_BUF *Packet;
Packet = (NET_BUF *) Context;
if (Token->Packet == Packet) {
return TRUE;
}
return FALSE;
}
/**
Cancel a single sent datagram.
@param UdpIo The UDP IO port to cancel the packet from
@param Packet The packet to cancel
@return None
**/
VOID
EFIAPI
UdpIoCancelSentDatagram (
IN UDP_IO_PORT *UdpIo,
IN NET_BUF *Packet
)
{
UdpIoCancelDgrams (UdpIo, EFI_ABORTED, UdpIoCancelSingleDgram, Packet);
}
/**
Recycle the received UDP data.
@param Context The UDP_RX_TOKEN
@return None
**/
STATIC
VOID
UdpIoRecycleDgram (
IN VOID *Context
)
{
UDP_RX_TOKEN *Token;
Token = (UDP_RX_TOKEN *) Context;
gBS->SignalEvent (Token->UdpToken.Packet.RxData->RecycleSignal);
UdpIoFreeRxToken (Token);
}
/**
The event handle for UDP receive request. It will build
a NET_BUF from the recieved UDP data, then deliver it
to the receiver.
@param Context The UDP RX token.
@return None
**/
STATIC
VOID
EFIAPI
UdpIoOnDgramRcvdDpc (
IN VOID *Context
)
{
EFI_UDP4_COMPLETION_TOKEN *UdpToken;
EFI_UDP4_RECEIVE_DATA *UdpRxData;
EFI_UDP4_SESSION_DATA *UdpSession;
UDP_RX_TOKEN *Token;
UDP_POINTS Points;
NET_BUF *Netbuf;
Token = (UDP_RX_TOKEN *) Context;
ASSERT ((Token->Signature == UDP_IO_RX_SIGNATURE) &&
(Token == Token->UdpIo->RecvRequest));
//
// Clear the receive request first in case that the caller
// wants to restart the receive in the callback.
//
Token->UdpIo->RecvRequest = NULL;
UdpToken = &Token->UdpToken;
UdpRxData = UdpToken->Packet.RxData;
if (EFI_ERROR (UdpToken->Status) || (UdpRxData == NULL)) {
if (UdpToken->Status != EFI_ABORTED) {
//
// Invoke the CallBack only if the reception is not actively aborted.
//
Token->CallBack (NULL, NULL, UdpToken->Status, Token->Context);
}
UdpIoFreeRxToken (Token);
return;
}
//
// Build a NET_BUF from the UDP receive data, then deliver it up.
//
Netbuf = NetbufFromExt (
(NET_FRAGMENT *) UdpRxData->FragmentTable,
UdpRxData->FragmentCount,
0,
(UINT32) Token->HeadLen,
UdpIoRecycleDgram,
Token
);
if (Netbuf == NULL) {
gBS->SignalEvent (UdpRxData->RecycleSignal);
Token->CallBack (NULL, NULL, EFI_OUT_OF_RESOURCES, Token->Context);
UdpIoFreeRxToken (Token);
return;
}
UdpSession = &UdpRxData->UdpSession;
Points.LocalPort = UdpSession->DestinationPort;
Points.RemotePort = UdpSession->SourcePort;
CopyMem (&Points.LocalAddr, &UdpSession->DestinationAddress, sizeof (IP4_ADDR));
CopyMem (&Points.RemoteAddr, &UdpSession->SourceAddress, sizeof (IP4_ADDR));
Points.LocalAddr = NTOHL (Points.LocalAddr);
Points.RemoteAddr = NTOHL (Points.RemoteAddr);
Token->CallBack (Netbuf, &Points, EFI_SUCCESS, Token->Context);
}
/**
Request UdpIoOnDgramRcvdDpc as a DPC at TPL_CALLBACK.
@param Event The UDP receive request event.
@param Context The UDP RX token.
@return None
**/
STATIC
VOID
EFIAPI
UdpIoOnDgramRcvd (
IN EFI_EVENT Event,
IN VOID *Context
)
/*++
Routine Description:
Request UdpIoOnDgramRcvdDpc as a DPC at TPL_CALLBACK
Arguments:
Event - The UDP receive request event
Context - The UDP RX token.
Returns:
None
--*/
{
//
// Request UdpIoOnDgramRcvdDpc as a DPC at TPL_CALLBACK
//
NetLibQueueDpc (TPL_CALLBACK, UdpIoOnDgramRcvdDpc, Context);
}
/**
Issue a receive request to the UDP IO port.
@param UdpIo The UDP IO port to recieve the packet from.
@param CallBack The call back function to execute when receive
finished.
@param Context The opque context to the call back
@param HeadLen The lenght of the application's header
@retval EFI_ALREADY_STARTED There is already a pending receive request. Only
one receive request is supported.
@retval EFI_OUT_OF_RESOURCES Failed to allocate some resource.
@retval EFI_SUCCESS The receive request is issued successfully.
**/
EFI_STATUS
EFIAPI
UdpIoRecvDatagram (
IN UDP_IO_PORT *UdpIo,
IN UDP_IO_CALLBACK CallBack,
IN VOID *Context,
IN UINT32 HeadLen
)
{
UDP_RX_TOKEN *Token;
EFI_STATUS Status;
if (UdpIo->RecvRequest != NULL) {
return EFI_ALREADY_STARTED;
}
Token = UdpIoCreateRxToken (UdpIo, CallBack, Context, HeadLen);
if (Token == NULL) {
return EFI_OUT_OF_RESOURCES;
}
UdpIo->RecvRequest = Token;
Status = UdpIo->Udp->Receive (UdpIo->Udp, &Token->UdpToken);
if (EFI_ERROR (Status)) {
UdpIo->RecvRequest = NULL;
UdpIoFreeRxToken (Token);
}
return Status;
}