audk/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c

639 lines
18 KiB
C

/** @file
Copyright (c) 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
UsbMassImpl.c
Abstract:
The implementation of USB mass storage class device driver.
The command set supported is "USB Mass Storage Specification
for Bootability".
Revision History
**/
#include "UsbMassImpl.h"
//
// The underlying transport protocol. CBI support isn't included
// in the current build. It is being obseleted by the standard
// body. If you want to enable it, remove the if directive here,
// then add the UsbMassCbi.c/.h to the driver's inf file.
//
STATIC
USB_MASS_TRANSPORT *mUsbMassTransport[] = {
&mUsbCbi0Transport,
&mUsbCbi1Transport,
&mUsbBotTransport,
NULL
};
UINTN mUsbMscInfo = DEBUG_INFO;
UINTN mUsbMscError = DEBUG_ERROR;
/**
Retrieve the media parameters such as disk gemotric for the
device's BLOCK IO protocol.
@param UsbMass The USB mass storage device
@retval EFI_SUCCESS The media parameters is updated successfully.
@retval Others Failed to get the media parameters.
**/
EFI_STATUS
UsbMassInitMedia (
IN USB_MASS_DEVICE *UsbMass
)
{
EFI_BLOCK_IO_MEDIA *Media;
EFI_STATUS Status;
UINTN Index;
Media = &UsbMass->BlockIoMedia;
//
// Initialize the MediaPrsent/ReadOnly and others to the default.
// We are not forced to get it right at this time, check UEFI2.0
// spec for more information:
//
// MediaPresent: This field shows the media present status as
// of the most recent ReadBlocks or WriteBlocks call.
//
// ReadOnly : This field shows the read-only status as of the
// recent WriteBlocks call.
//
// but remember to update MediaId/MediaPresent/ReadOnly status
// after ReadBlocks and WriteBlocks
//
Media->MediaPresent = FALSE;
Media->LogicalPartition = FALSE;
Media->ReadOnly = FALSE;
Media->WriteCaching = FALSE;
Media->IoAlign = 0;
//
// Some device may spend several seconds before it is ready.
// Try several times before giving up. Wait 5s at most.
//
Status = EFI_SUCCESS;
for (Index = 0; Index < USB_BOOT_WAIT_RETRY; Index++) {
Status = UsbBootGetParams (UsbMass);
if ((Status != EFI_MEDIA_CHANGED)
&& (Status != EFI_NOT_READY)
&& (Status != EFI_TIMEOUT)) {
break;
}
Status = UsbBootIsUnitReady (UsbMass);
if (EFI_ERROR (Status)) {
gBS->Stall (USB_BOOT_UNIT_READY_STALL * (Index + 1));
}
}
return Status;
}
/**
Reset the block device. ExtendedVerification is ignored for this.
@param This The BLOCK IO protocol
@param ExtendedVerification Whether to execute extended verfication.
@retval EFI_SUCCESS The device is successfully resetted.
@retval Others Failed to reset the device.
**/
EFI_STATUS
UsbMassReset (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
)
{
USB_MASS_DEVICE *UsbMass;
UsbMass = USB_MASS_DEVICE_FROM_BLOCKIO (This);
return UsbMass->Transport->Reset (UsbMass->Context, ExtendedVerification);
}
/**
Read some blocks of data from the block device.
@param This The Block IO protocol
@param MediaId The media's ID of the device for current request
@param Lba The start block number
@param BufferSize The size of buffer to read data in
@param Buffer The buffer to read data to
@retval EFI_SUCCESS The data is successfully read
@retval EFI_NO_MEDIA Media isn't present
@retval EFI_MEDIA_CHANGED The device media has been changed, that is,
MediaId changed
@retval EFI_INVALID_PARAMETER Some parameters are invalid, such as Buffer is
NULL.
@retval EFI_BAD_BUFFER_SIZE The buffer size isn't a multiple of media's block
size, or overflow the last block number.
**/
EFI_STATUS
UsbMassReadBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
)
{
USB_MASS_DEVICE *UsbMass;
EFI_BLOCK_IO_MEDIA *Media;
EFI_STATUS Status;
UINTN TotalBlock;
UsbMass = USB_MASS_DEVICE_FROM_BLOCKIO (This);
Media = &UsbMass->BlockIoMedia;
//
// First, validate the parameters
//
if ((Buffer == NULL) || (BufferSize == 0)) {
return EFI_INVALID_PARAMETER;
}
//
// If it is a remoable media, such as CD-Rom or Usb-Floppy,
// if, need to detect the media before each rw, while Usb-Flash
// needn't. However, it's hard to identify Usb-Floppy between
// Usb-Flash by now, so detect media every time.
//
Status = UsbBootDetectMedia (UsbMass);
if (EFI_ERROR (Status)) {
DEBUG ((mUsbMscError, "UsbMassReadBlocks: UsbBootDetectMedia (%r)\n", Status));
return Status;
}
//
// Make sure BlockSize and LBA is consistent with BufferSize
//
if ((BufferSize % Media->BlockSize) != 0) {
return EFI_BAD_BUFFER_SIZE;
}
TotalBlock = BufferSize / Media->BlockSize;
if (Lba + TotalBlock - 1 > Media->LastBlock) {
return EFI_BAD_BUFFER_SIZE;
}
Status = UsbBootReadBlocks (UsbMass, (UINT32) Lba, TotalBlock, Buffer);
if (EFI_ERROR (Status)) {
DEBUG ((mUsbMscError, "UsbMassReadBlocks: UsbBootReadBlocks (%r) -> Reset\n", Status));
UsbMassReset (This, TRUE);
}
return Status;
}
/**
Write some blocks of data to the block device.
@param This The Block IO protocol
@param MediaId The media's ID of the device for current request
@param Lba The start block number
@param BufferSize The size of buffer to write data to
@param Buffer The buffer to write data to
@retval EFI_SUCCESS The data is successfully written
@retval EFI_NO_MEDIA Media isn't present
@retval EFI_MEDIA_CHANGED The device media has been changed, that is,
MediaId changed
@retval EFI_INVALID_PARAMETER Some parameters are invalid, such as Buffer is
NULL.
@retval EFI_BAD_BUFFER_SIZE The buffer size isn't a multiple of media's block
size,
**/
EFI_STATUS
UsbMassWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
IN VOID *Buffer
)
{
USB_MASS_DEVICE *UsbMass;
EFI_BLOCK_IO_MEDIA *Media;
EFI_STATUS Status;
UINTN TotalBlock;
UsbMass = USB_MASS_DEVICE_FROM_BLOCKIO (This);
Media = &UsbMass->BlockIoMedia;
//
// First, validate the parameters
//
if ((Buffer == NULL) || (BufferSize == 0)) {
return EFI_INVALID_PARAMETER;
}
//
// If it is a remoable media, such as CD-Rom or Usb-Floppy,
// if, need to detect the media before each rw, while Usb-Flash
// needn't. However, it's hard to identify Usb-Floppy between
// Usb-Flash by now, so detect media every time.
//
Status = UsbBootDetectMedia (UsbMass);
if (EFI_ERROR (Status)) {
DEBUG ((mUsbMscError, "UsbMassWriteBlocks: UsbBootDetectMedia (%r)\n", Status));
return Status;
}
//
// Make sure BlockSize and LBA is consistent with BufferSize
//
if ((BufferSize % Media->BlockSize) != 0) {
return EFI_BAD_BUFFER_SIZE;
}
TotalBlock = BufferSize / Media->BlockSize;
if (Lba + TotalBlock - 1 > Media->LastBlock) {
return EFI_BAD_BUFFER_SIZE;
}
//
// Try to write the data even the device is marked as ReadOnly,
// and clear the status should the write succeed.
//
Status = UsbBootWriteBlocks (UsbMass, (UINT32) Lba, TotalBlock, Buffer);
if (EFI_ERROR (Status)) {
DEBUG ((mUsbMscError, "UsbMassWriteBlocks: UsbBootWriteBlocks (%r) -> Reset\n", Status));
UsbMassReset (This, TRUE);
}
return Status;
}
/**
Flush the cached writes to disks. USB mass storage device doesn't
support write cache, so return EFI_SUCCESS directly.
@param This The BLOCK IO protocol
@retval EFI_SUCCESS Always returns success
**/
EFI_STATUS
UsbMassFlushBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This
)
{
return EFI_SUCCESS;
}
/**
Check whether the controller is a supported USB mass storage.
@param This The USB mass driver's driver binding.
@param Controller The device to test against.
@param RemainingDevicePath The remaining device path
@retval EFI_SUCCESS This device is a supported USB mass storage.
@retval EFI_UNSUPPORTED The device isn't supported
@retval Others Some error happened.
**/
EFI_STATUS
EFIAPI
USBMassDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_USB_IO_PROTOCOL *UsbIo;
EFI_USB_INTERFACE_DESCRIPTOR Interface;
USB_MASS_TRANSPORT *Transport;
EFI_STATUS Status;
INTN Index;
//
// Check whether the controlelr support USB_IO
//
Status = gBS->OpenProtocol (
Controller,
&gEfiUsbIoProtocolGuid,
(VOID **) &UsbIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Get the interface to check the USB class and find a transport
// protocol handler.
//
Status = UsbIo->UsbGetInterfaceDescriptor (UsbIo, &Interface);
if (EFI_ERROR (Status)) {
goto ON_EXIT;
}
Status = EFI_UNSUPPORTED;
if (Interface.InterfaceClass != USB_MASS_STORE_CLASS) {
goto ON_EXIT;
}
for (Index = 0; mUsbMassTransport[Index] != NULL; Index++) {
Transport = mUsbMassTransport[Index];
if (Interface.InterfaceProtocol == Transport->Protocol) {
Status = Transport->Init (UsbIo, Controller, NULL);
break;
}
}
DEBUG ((mUsbMscInfo, "Found a USB mass store device %r\n", Status));
ON_EXIT:
gBS->CloseProtocol (
Controller,
&gEfiUsbIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
return Status;
}
/**
Start the USB mass storage device on the controller. It will
install a BLOCK_IO protocol on the device if everything is OK.
@param This The USB mass storage driver binding.
@param Controller The USB mass storage device to start on
@param RemainingDevicePath The remaining device path.
@retval EFI_SUCCESS The driver has started on the device.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory
@retval Others Failed to start the driver on the device.
**/
EFI_STATUS
EFIAPI
USBMassDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_USB_IO_PROTOCOL *UsbIo;
EFI_USB_INTERFACE_DESCRIPTOR Interface;
USB_MASS_DEVICE *UsbMass;
USB_MASS_TRANSPORT *Transport;
EFI_STATUS Status;
UINTN Index;
Status = gBS->OpenProtocol (
Controller,
&gEfiUsbIoProtocolGuid,
(VOID **) &UsbIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
return Status;
}
UsbMass = AllocateZeroPool (sizeof (USB_MASS_DEVICE));
if (UsbMass == NULL) {
return EFI_OUT_OF_RESOURCES;
}
//
// Initialize the transport protocols
//
Status = UsbIo->UsbGetInterfaceDescriptor (UsbIo, &Interface);
if (EFI_ERROR (Status)) {
DEBUG ((mUsbMscError, "USBMassDriverBindingStart: UsbIo->UsbGetInterfaceDescriptor (%r)\n", Status));
goto ON_ERROR;
}
Status = EFI_UNSUPPORTED;
for (Index = 0; mUsbMassTransport[Index] != NULL; Index++) {
Transport = mUsbMassTransport[Index];
if (Interface.InterfaceProtocol == Transport->Protocol) {
UsbMass->Transport = Transport;
Status = Transport->Init (UsbIo, Controller, &UsbMass->Context);
break;
}
}
if (EFI_ERROR (Status)) {
DEBUG ((mUsbMscError, "USBMassDriverBindingStart: Transport->Init (%r)\n", Status));
goto ON_ERROR;
}
UsbMass->Signature = USB_MASS_SIGNATURE;
UsbMass->Controller = Controller;
UsbMass->UsbIo = UsbIo;
UsbMass->BlockIo.Media = &UsbMass->BlockIoMedia;
UsbMass->BlockIo.Reset = UsbMassReset;
UsbMass->BlockIo.ReadBlocks = UsbMassReadBlocks;
UsbMass->BlockIo.WriteBlocks = UsbMassWriteBlocks;
UsbMass->BlockIo.FlushBlocks = UsbMassFlushBlocks;
UsbMass->OpticalStorage = FALSE;
//
// Get the storage's parameters, such as last block number.
// then install the BLOCK_IO
//
Status = UsbMassInitMedia (UsbMass);
if (!EFI_ERROR (Status)) {
if ((UsbMass->Pdt != USB_PDT_DIRECT_ACCESS) &&
(UsbMass->Pdt != USB_PDT_CDROM) &&
(UsbMass->Pdt != USB_PDT_OPTICAL) &&
(UsbMass->Pdt != USB_PDT_SIMPLE_DIRECT)) {
DEBUG ((mUsbMscError, "USBMassDriverBindingStart: Found an unsupported peripheral type[%d]\n", UsbMass->Pdt));
goto ON_ERROR;
}
} else if (Status != EFI_NO_MEDIA){
DEBUG ((mUsbMscError, "USBMassDriverBindingStart: UsbMassInitMedia (%r)\n", Status));
goto ON_ERROR;
}
Status = gBS->InstallProtocolInterface (
&Controller,
&gEfiBlockIoProtocolGuid,
EFI_NATIVE_INTERFACE,
&UsbMass->BlockIo
);
if (EFI_ERROR (Status)) {
goto ON_ERROR;
}
return EFI_SUCCESS;
ON_ERROR:
gBS->FreePool (UsbMass);
gBS->CloseProtocol (
Controller,
&gEfiUsbIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
return Status;
}
/**
Stop controlling the device.
@param This The USB mass storage driver binding
@param Controller The device controller controlled by the driver.
@param NumberOfChildren The number of children of this device
@param ChildHandleBuffer The buffer of children handle.
@retval EFI_SUCCESS The driver stopped from controlling the device.
@retval Others Failed to stop the driver
**/
EFI_STATUS
EFIAPI
USBMassDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
{
EFI_STATUS Status;
USB_MASS_DEVICE *UsbMass;
EFI_BLOCK_IO_PROTOCOL *BlockIo;
//
// First, get our context back from the BLOCK_IO
//
Status = gBS->OpenProtocol (
Controller,
&gEfiBlockIoProtocolGuid,
(VOID **) &BlockIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return Status;
}
UsbMass = USB_MASS_DEVICE_FROM_BLOCKIO (BlockIo);
//
// Uninstall Block I/O protocol from the device handle,
// then call the transport protocol to stop itself.
//
Status = gBS->UninstallProtocolInterface (
Controller,
&gEfiBlockIoProtocolGuid,
&UsbMass->BlockIo
);
if (EFI_ERROR (Status)) {
return Status;
}
gBS->CloseProtocol (
Controller,
&gEfiUsbIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
UsbMass->Transport->Fini (UsbMass->Context);
gBS->FreePool (UsbMass);
return EFI_SUCCESS;
}
EFI_DRIVER_BINDING_PROTOCOL gUSBMassDriverBinding = {
USBMassDriverBindingSupported,
USBMassDriverBindingStart,
USBMassDriverBindingStop,
0x11,
NULL,
NULL
};
EFI_STATUS
EFIAPI
USBMassStorageEntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
/*++
Routine Description:
The entry point for the driver, which will install the driver binding and
component name protocol
Arguments:
ImageHandle - The image handle of this driver
SystemTable - The system table
Returns:
EFI_SUCCESS - the protocols are installed OK
Others - Failed to install protocols.
--*/
{
EFI_STATUS Status;
//
// Install driver binding protocol
//
Status = EfiLibInstallAllDriverProtocols (
ImageHandle,
SystemTable,
&gUSBMassDriverBinding,
ImageHandle,
&gUsbMassStorageComponentName,
NULL,
NULL
);
return Status;
}