audk/MdePkg/Library/BaseS3BootScriptLibNull/BootScriptLib.c

569 lines
22 KiB
C

/** @file
Null function implementation for EFI S3 boot script.
Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <Base.h>
#include <Library/S3BootScriptLib.h>
/**
Save I/O write to boot script
@param Width the width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The base address of the I/O operations.
@param Count The number of I/O operations to perform.
@param Buffer The source buffer from which to write data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveIoWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for an I/O modify operation into a S3 boot script table
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The base address of the I/O operations.
@param Data A pointer to the data to be OR-ed.
@param DataMask A pointer to the data mask to be AND-ed with the data read from the register
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveIoReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for a memory write operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The base address of the memory operations
@param Count The number of memory operations to perform.
@param Buffer The source buffer from which to write the data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveMemWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for a memory modify operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The base address of the memory operations. Address needs alignment if required
@param Data A pointer to the data to be OR-ed.
@param DataMask A pointer to the data mask to be AND-ed with the data read from the register.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveMemReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for a PCI configuration space write operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The address within the PCI configuration space.
@param Count The number of PCI operations to perform.
@param Buffer The source buffer from which to write the data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfgWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for a PCI configuration space modify operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Address The address within the PCI configuration space.
@param Data A pointer to the data to be OR-ed.The size depends on Width.
@param DataMask A pointer to the data mask to be AND-ed.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN__SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfgReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for a PCI configuration space modify operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Segment The PCI segment number for Address.
@param Address The address within the PCI configuration space.
@param Count The number of PCI operations to perform.
@param Buffer The source buffer from which to write the data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfg2Write (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for a PCI configuration space modify operation into a specified boot script table.
@param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.
@param Segment The PCI segment number for Address.
@param Address The address within the PCI configuration space.
@param Data A pointer to the data to be OR-ed. The size depends on Width.
@param DataMask A pointer to the data mask to be AND-ed.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfg2ReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for an SMBus command execution into a specified boot script table.
@param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.
@param Operation Indicates which particular SMBus protocol it will use to execute the SMBus
transactions.
@param Length A pointer to signify the number of bytes that this operation will do.
@param Buffer Contains the value of data to execute to the SMBUS slave device.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveSmbusExecute (
IN UINTN SmBusAddress,
IN EFI_SMBUS_OPERATION Operation,
IN UINTN *Length,
IN VOID *Buffer
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for an execution stall on the processor into a specified boot script table.
@param Duration Duration in microseconds of the stall
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveStall (
IN UINTN Duration
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for dispatching specified arbitrary code into a specified boot script table.
@param EntryPoint Entry point of the code to be dispatched.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveDispatch (
IN VOID *EntryPoint
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for dispatching specified arbitrary code into a specified boot script table.
@param EntryPoint Entry point of the code to be dispatched.
@param Context Argument to be passed into the EntryPoint of the code to be dispatched.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveDispatch2 (
IN VOID *EntryPoint,
IN VOID *Context
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for memory reads of the memory location and continues when the exit criteria is
satisfied or after a defined duration.
Please aware, below interface is different with PI specification, Vol 5:
EFI_S3_SAVE_STATE_PROTOCOL.Write() for EFI_BOOT_SCRIPT_MEM_POLL_OPCODE.
"Duration" below is microseconds, while "Delay" in PI specification means
the number of 100ns units to poll.
@param Width The width of the memory operations.
@param Address The base address of the memory operations.
@param BitMask A pointer to the bit mask to be AND-ed with the data read from the register.
@param BitValue A pointer to the data value after to be Masked.
@param Duration Duration in microseconds of the stall.
@param LoopTimes The times of the register polling.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveMemPoll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *BitMask,
IN VOID *BitValue,
IN UINTN Duration,
IN UINT64 LoopTimes
)
{
return RETURN_SUCCESS;
}
/**
Store arbitrary information in the boot script table. This opcode is a no-op on dispatch and is only
used for debugging script issues.
@param InformationLength Length of the data in bytes
@param Information Information to be logged in the boot scrpit
@retval RETURN_UNSUPPORTED If entering runtime, this method will not support.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveInformation (
IN UINT32 InformationLength,
IN VOID *Information
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for I/O reads the I/O location and continues when the exit criteria is satisfied or after a
defined duration.
@param Width The width of the I/O operations.
@param Address The base address of the I/O operations.
@param Data The comparison value used for the polling exit criteria.
@param DataMask Mask used for the polling criteria. The bits in the bytes below Width which are zero
in Data are ignored when polling the memory address.
@param Delay The number of 100ns units to poll. Note that timer available may be of poorer
granularity so the delay may be longer.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveIoPoll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask,
IN UINT64 Delay
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for PCI configuration space reads and continues when the exit criteria is satisfied or
after a defined duration.
@param Width The width of the I/O operations.
@param Address The address within the PCI configuration space.
@param Data The comparison value used for the polling exit criteria.
@param DataMask Mask used for the polling criteria. The bits in the bytes below Width which are zero
in Data are ignored when polling the memory address
@param Delay The number of 100ns units to poll. Note that timer available may be of poorer
granularity so the delay may be longer.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciPoll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask,
IN UINT64 Delay
)
{
return RETURN_SUCCESS;
}
/**
Adds a record for PCI configuration space reads and continues when the exit criteria is satisfied or
after a defined duration.
@param Width The width of the I/O operations.
@param Segment The PCI segment number for Address.
@param Address The address within the PCI configuration space.
@param Data The comparison value used for the polling exit criteria.
@param DataMask Mask used for the polling criteria. The bits in the bytes below Width which are zero
in Data are ignored when polling the memory address
@param Delay The number of 100ns units to poll. Note that timer available may be of poorer
granularity so the delay may be longer.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.
@retval RETURN_SUCCESS Opcode is added.
@note A known Limitations in the implementation: When interpreting the opcode EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE
EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE and EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL_OPCODE, the 'Segment' parameter is assumed as
Zero, or else, assert.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePci2Poll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask,
IN UINT64 Delay
)
{
return RETURN_SUCCESS;
}
/**
Save ASCII string information specified by Buffer to
boot script with opcode EFI_BOOT_SCRIPT_INFORMATION_OPCODE
@param String the ascii string to store into the S3 boot script table
@retval RETURN_NOT_FOUND BootScriptSave Protocol not exist.
@retval RETURN_SUCCESS BootScriptSave Protocol exist, always returns RETURN_SUCCESS
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveInformationAsciiString (
IN CONST CHAR8 *String
)
{
return RETURN_SUCCESS;
}
/**
This is an function to close the S3 boot script table. The function could only be called in
BOOT time phase. To comply with the Framework spec definition on
EFI_BOOT_SCRIPT_SAVE_PROTOCOL.CloseTable(), this function will fulfill following things:
1. Closes the specified boot script table
2. It allocates a new memory pool to duplicate all the boot scripts in the specified table.
Once this function is called, the table maintained by the library will be destroyed
after it is copied into the allocated pool.
3. Any attempts to add a script record after calling this function will cause a new table
to be created by the library.
4. The base address of the allocated pool will be returned in Address. Note that after
using the boot script table, the CALLER is responsible for freeing the pool that is allocated
by this function.
In Spec PI1.1, this EFI_BOOT_SCRIPT_SAVE_PROTOCOL.CloseTable() is retired. By then it is not
necessary to provide this API in BootScriptLib. To provides this API for now is only to meet
the requirement from Framework Spec.
If anyone does call CloseTable() on a real platform, then the caller is responsible for figuring out
how to get the script to run on an S3 resume because the boot script maintained by the lib will be
destroyed.
@return the base address of the new copy of the boot script table.
**/
UINT8*
EFIAPI
S3BootScriptCloseTable (
VOID
)
{
return 0;
}
/**
Executes the S3 boot script table.
@param RETURN_SUCCESS The boot script table was executed successfully.
@param RETURN_UNSUPPORTED Invalid script table or opcode.
**/
RETURN_STATUS
EFIAPI
S3BootScriptExecute (
VOID
)
{
return RETURN_SUCCESS;
}
/**
Move the last boot script entry to the position
@param BeforeOrAfter Specifies whether the opcode is stored before (TRUE) or after (FALSE) the position
in the boot script table specified by Position. If Position is NULL or points to
NULL then the new opcode is inserted at the beginning of the table (if TRUE) or end
of the table (if FALSE).
@param Position On entry, specifies the position in the boot script table where the opcode will be
inserted, either before or after, depending on BeforeOrAfter. On exit, specifies
the position of the inserted opcode in the boot script table.
@retval RETURN_OUT_OF_RESOURCES The table is not available.
@retval RETURN_INVALID_PARAMETER The Position is not a valid position in the boot script table.
@retval RETURN_SUCCESS Opcode is inserted.
**/
RETURN_STATUS
EFIAPI
S3BootScriptMoveLastOpcode (
IN BOOLEAN BeforeOrAfter,
IN OUT VOID **Position OPTIONAL
)
{
return RETURN_SUCCESS;
}
/**
Find a label within the boot script table and, if not present, optionally create it.
@param BeforeOrAfter Specifies whether the opcode is stored before (TRUE)
or after (FALSE) the position in the boot script table
specified by Position.
@param CreateIfNotFound Specifies whether the label will be created if the label
does not exists (TRUE) or not (FALSE).
@param Position On entry, specifies the position in the boot script table
where the opcode will be inserted, either before or after,
depending on BeforeOrAfter. On exit, specifies the position
of the inserted opcode in the boot script table.
@param Label Points to the label which will be inserted in the boot script table.
@retval EFI_SUCCESS The operation succeeded. A record was added into the
specified script table.
@retval EFI_INVALID_PARAMETER The parameter is illegal or the given boot script is not supported.
If the opcode is unknow or not supported because of the PCD
Feature Flags.
@retval EFI_OUT_OF_RESOURCES There is insufficient memory to store the boot script.
**/
RETURN_STATUS
EFIAPI
S3BootScriptLabel (
IN BOOLEAN BeforeOrAfter,
IN BOOLEAN CreateIfNotFound,
IN OUT VOID **Position OPTIONAL,
IN CONST CHAR8 *Label
)
{
return RETURN_SUCCESS;
}
/**
Compare two positions in the boot script table and return their relative position.
@param Position1 The positions in the boot script table to compare
@param Position2 The positions in the boot script table to compare
@param RelativePosition On return, points to the result of the comparison
@retval EFI_SUCCESS The operation succeeded. A record was added into the
specified script table.
@retval EFI_INVALID_PARAMETER The parameter is illegal or the given boot script is not supported.
If the opcode is unknow or not supported because of the PCD
Feature Flags.
@retval EFI_OUT_OF_RESOURCES There is insufficient memory to store the boot script.
**/
RETURN_STATUS
EFIAPI
S3BootScriptCompare (
IN UINT8 *Position1,
IN UINT8 *Position2,
OUT UINTN *RelativePosition
)
{
return RETURN_SUCCESS;
}