audk/UefiCpuPkg/Library/SmmCpuFeaturesLib/X64/SmiEntry.asm

282 lines
8.2 KiB
NASM

;------------------------------------------------------------------------------ ;
; Copyright (c) 2009 - 2016, Intel Corporation. All rights reserved.<BR>
; This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
; http://opensource.org/licenses/bsd-license.php.
;
; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
; Module Name:
;
; SmiEntry.asm
;
; Abstract:
;
; Code template of the SMI handler for a particular processor
;
;-------------------------------------------------------------------------------
;
; Variables referenced by C code
;
EXTERNDEF SmiRendezvous:PROC
EXTERNDEF CpuSmmDebugEntry:PROC
EXTERNDEF CpuSmmDebugExit:PROC
EXTERNDEF gcStmSmiHandlerTemplate:BYTE
EXTERNDEF gcStmSmiHandlerSize:WORD
EXTERNDEF gcStmSmiHandlerOffset:WORD
EXTERNDEF gStmSmiCr3:DWORD
EXTERNDEF gStmSmiStack:DWORD
EXTERNDEF gStmSmbase:DWORD
EXTERNDEF gStmXdSupported:BYTE
EXTERNDEF gStmSmiHandlerIdtr:FWORD
MSR_IA32_MISC_ENABLE EQU 1A0h
MSR_EFER EQU 0c0000080h
MSR_EFER_XD EQU 0800h
;
; Constants relating to TXT_PROCESSOR_SMM_DESCRIPTOR
;
DSC_OFFSET EQU 0fb00h
DSC_GDTPTR EQU 48h
DSC_GDTSIZ EQU 50h
DSC_CS EQU 14h
DSC_DS EQU 16h
DSC_SS EQU 18h
DSC_OTHERSEG EQU 1ah
;
; Constants relating to CPU State Save Area
;
SSM_DR6 EQU 0ffd0h
SSM_DR7 EQU 0ffc8h
PROTECT_MODE_CS EQU 08h
PROTECT_MODE_DS EQU 20h
LONG_MODE_CS EQU 38h
TSS_SEGMENT EQU 40h
GDT_SIZE EQU 50h
.code
gcStmSmiHandlerTemplate LABEL BYTE
_StmSmiEntryPoint:
;
; The encoding of BX in 16-bit addressing mode is the same as of RDI in 64-
; bit addressing mode. And that coincidence has been used in the following
; "64-bit like" 16-bit code. Be aware that once RDI is referenced as a
; base address register, it is actually BX that is referenced.
;
DB 0bbh ; mov bx, imm16
DW offset _StmGdtDesc - _StmSmiEntryPoint + 8000h ; bx = GdtDesc offset
; fix GDT descriptor
DB 2eh, 0a1h ; mov ax, cs:[offset16]
DW DSC_OFFSET + DSC_GDTSIZ
DB 48h ; dec ax
DB 2eh
mov [rdi], eax ; mov cs:[bx], ax
DB 66h, 2eh, 0a1h ; mov eax, cs:[offset16]
DW DSC_OFFSET + DSC_GDTPTR
DB 2eh
mov [rdi + 2], ax ; mov cs:[bx + 2], eax
DB 66h, 2eh
lgdt fword ptr [rdi] ; lgdt fword ptr cs:[bx]
; Patch ProtectedMode Segment
DB 0b8h ; mov ax, imm16
DW PROTECT_MODE_CS ; set AX for segment directly
DB 2eh
mov [rdi - 2], eax ; mov cs:[bx - 2], ax
; Patch ProtectedMode entry
DB 66h, 0bfh ; mov edi, SMBASE
gStmSmbase DD ?
lea ax, [edi + (@ProtectedMode - _StmSmiEntryPoint) + 8000h]
DB 2eh
mov [rdi - 6], ax ; mov cs:[bx - 6], eax
; Switch into @ProtectedMode
mov rbx, cr0
DB 66h
and ebx, 9ffafff3h
DB 66h
or ebx, 00000023h
mov cr0, rbx
DB 66h, 0eah
DD ?
DW ?
_StmGdtDesc FWORD ?
@ProtectedMode:
mov ax, PROTECT_MODE_DS
mov ds, ax
mov es, ax
mov fs, ax
mov gs, ax
mov ss, ax
DB 0bch ; mov esp, imm32
gStmSmiStack DD ?
jmp ProtFlatMode
ProtFlatMode:
DB 0b8h ; mov eax, offset gStmSmiCr3
gStmSmiCr3 DD ?
mov cr3, rax
mov eax, 668h ; as cr4.PGE is not set here, refresh cr3
mov cr4, rax ; in PreModifyMtrrs() to flush TLB.
; Load TSS
sub esp, 8 ; reserve room in stack
sgdt fword ptr [rsp]
mov eax, [rsp + 2] ; eax = GDT base
add esp, 8
mov dl, 89h
mov [rax + TSS_SEGMENT + 5], dl ; clear busy flag
mov eax, TSS_SEGMENT
ltr ax
; enable NXE if supported
DB 0b0h ; mov al, imm8
gStmXdSupported DB 1
cmp al, 0
jz @SkipXd
;
; Check XD disable bit
;
mov ecx, MSR_IA32_MISC_ENABLE
rdmsr
sub esp, 4
push rdx ; save MSR_IA32_MISC_ENABLE[63-32]
test edx, BIT2 ; MSR_IA32_MISC_ENABLE[34]
jz @f
and dx, 0FFFBh ; clear XD Disable bit if it is set
wrmsr
@@:
mov ecx, MSR_EFER
rdmsr
or ax, MSR_EFER_XD ; enable NXE
wrmsr
jmp @XdDone
@SkipXd:
sub esp, 8
@XdDone:
; Switch into @LongMode
push LONG_MODE_CS ; push cs hardcore here
call Base ; push return address for retf later
Base:
add dword ptr [rsp], @LongMode - Base; offset for far retf, seg is the 1st arg
mov ecx, MSR_EFER
rdmsr
or ah, 1 ; enable LME
wrmsr
mov rbx, cr0
or ebx, 080010023h ; enable paging + WP + NE + MP + PE
mov cr0, rbx
retf
@LongMode: ; long mode (64-bit code) starts here
mov rax, offset gStmSmiHandlerIdtr
lidt fword ptr [rax]
lea ebx, [rdi + DSC_OFFSET]
mov ax, [rbx + DSC_DS]
mov ds, eax
mov ax, [rbx + DSC_OTHERSEG]
mov es, eax
mov fs, eax
mov gs, eax
mov ax, [rbx + DSC_SS]
mov ss, eax
CommonHandler:
mov rbx, [rsp + 0x08] ; rbx <- CpuIndex
;
; Save FP registers
;
sub rsp, 200h
DB 48h ; FXSAVE64
fxsave [rsp]
add rsp, -20h
mov rcx, rbx
mov rax, CpuSmmDebugEntry
call rax
mov rcx, rbx
mov rax, SmiRendezvous ; rax <- absolute addr of SmiRedezvous
call rax
mov rcx, rbx
mov rax, CpuSmmDebugExit
call rax
add rsp, 20h
;
; Restore FP registers
;
DB 48h ; FXRSTOR64
fxrstor [rsp]
add rsp, 200h
mov rax, offset ASM_PFX(gStmXdSupported)
mov al, [rax]
cmp al, 0
jz @f
pop rdx ; get saved MSR_IA32_MISC_ENABLE[63-32]
test edx, BIT2
jz @f
mov ecx, MSR_IA32_MISC_ENABLE
rdmsr
or dx, BIT2 ; set XD Disable bit if it was set before entering into SMM
wrmsr
@@:
rsm
_StmSmiHandler:
;
; Check XD disable bit
;
xor r8, r8
mov rax, offset ASM_PFX(gStmXdSupported)
mov al, [rax]
cmp al, 0
jz @StmXdDone
mov ecx, MSR_IA32_MISC_ENABLE
rdmsr
mov r8, rdx ; save MSR_IA32_MISC_ENABLE[63-32]
test edx, BIT2 ; MSR_IA32_MISC_ENABLE[34]
jz @f
and dx, 0FFFBh ; clear XD Disable bit if it is set
wrmsr
@@:
mov ecx, MSR_EFER
rdmsr
or ax, MSR_EFER_XD ; enable NXE
wrmsr
@StmXdDone:
push r8
; below step is needed, because STM does not run above code.
; we have to run below code to set IDT/CR0/CR4
mov rax, offset gStmSmiHandlerIdtr
lidt fword ptr [rax]
mov rax, cr0
or eax, 80010023h ; enable paging + WP + NE + MP + PE
mov cr0, rax
mov rax, cr4
mov eax, 668h ; as cr4.PGE is not set here, refresh cr3
mov cr4, rax ; in PreModifyMtrrs() to flush TLB.
; STM init finish
jmp CommonHandler
gcStmSmiHandlerSize DW $ - _StmSmiEntryPoint
gcStmSmiHandlerOffset DW _StmSmiHandler - _StmSmiEntryPoint
END