audk/EdkCompatibilityPkg/Compatibility/MpServicesOnFrameworkMpServ.../MpServicesOnFrameworkMpServ...

534 lines
18 KiB
C

/** @file
Include file for PI MP Services Protocol Thunk.
Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
**/
#ifndef _MP_SERVICES_ON_FRAMEWORK_MP_SERVICES_THUNK_
#define _MP_SERVICES_ON_FRAMEWORK_MP_SERVICES_THUNK_
#include <Protocol/MpService.h>
#include <Protocol/FrameworkMpService.h>
#include <Protocol/GenericMemoryTest.h>
#include <Library/BaseLib.h>
#include <Library/SynchronizationLib.h>
#include <Library/DebugLib.h>
#include <Library/UefiLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/UefiDriverEntryPoint.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/DxeServicesTableLib.h>
#include <Library/IoLib.h>
#include <Library/TimerLib.h>
#include <Library/DebugAgentLib.h>
#include <Library/LocalApicLib.h>
#define AP_STACK_SIZE 0x8000
#define MAX_CPU_NUMBER 256
//
// Bit definition for IPI
//
#define BROADCAST_MODE_ALL_EXCLUDING_SELF_BIT 0xC0000
#define SPECIFY_CPU_MODE_BIT 0x00000
#define TRIGGER_MODE_LEVEL_BIT 0x08000
#define ASSERT_BIT 0x04000
//
// Local APIC register definition for IPI.
//
#define APIC_REGISTER_SPURIOUS_VECTOR_OFFSET 0xF0
#define APIC_REGISTER_ICR_LOW_OFFSET 0x300
#define APIC_REGISTER_ICR_HIGH_OFFSET 0x310
#define APIC_REGISTER_LVT_TIMER 0x320
#define APIC_REGISTER_TIMER_INIT_COUNT 0x380
#define APIC_REGISTER_LINT0_VECTOR_OFFSET 0x350
#define APIC_REGISTER_LINT1_VECTOR_OFFSET 0x360
#define APIC_REGISTER_TIMER_COUNT 0x390
#define APIC_REGISTER_TIMER_DIVIDE 0x3E0
//
// Definition for MSR address
//
#define MSR_IA32_TIME_STAMP_COUNTER 0x10
#define MSR_IA32_APIC_BASE 0x1B
typedef struct {
UINTN Lock;
VOID *StackStart;
UINTN StackSize;
VOID *ApFunction;
IA32_DESCRIPTOR GdtrProfile;
IA32_DESCRIPTOR IdtrProfile;
UINT32 BufferStart;
UINT32 Cr3;
UINT32 ProcessorNumber[MAX_CPU_NUMBER];
} MP_CPU_EXCHANGE_INFO;
typedef struct {
UINT8 *RendezvousFunnelAddress;
UINTN PModeEntryOffset;
UINTN FlatJumpOffset;
UINTN LModeEntryOffset;
UINTN LongJumpOffset;
UINTN Size;
} MP_ASSEMBLY_ADDRESS_MAP;
typedef enum {
CpuStateIdle,
CpuStateReady,
CpuStateBusy,
CpuStateFinished,
CpuStateDisabled
} CPU_STATE;
//
// Define Individual Processor Data block.
//
typedef struct {
EFI_AP_PROCEDURE volatile Procedure;
VOID* volatile Parameter;
EFI_EVENT WaitEvent;
BOOLEAN *Finished;
UINT64 ExpectedTime;
UINT64 CurrentTime;
UINT64 TotalTime;
SPIN_LOCK CpuDataLock;
CPU_STATE volatile State;
} CPU_DATA_BLOCK;
//
// Define MP data block which consumes individual processor block.
//
typedef struct {
SPIN_LOCK APSerializeLock;
EFI_EVENT CheckAPsEvent;
UINTN FinishCount;
UINTN StartCount;
BOOLEAN CpuList[MAX_CPU_NUMBER];
EFI_AP_PROCEDURE Procedure;
VOID *ProcArguments;
BOOLEAN SingleThread;
EFI_EVENT WaitEvent;
UINTN **FailedCpuList;
UINT64 ExpectedTime;
UINT64 CurrentTime;
UINT64 TotalTime;
CPU_DATA_BLOCK CpuData[MAX_CPU_NUMBER];
} MP_SYSTEM_DATA;
/**
Implementation of GetNumberOfProcessors() service of MP Services Protocol.
This service retrieves the number of logical processor in the platform
and the number of those logical processors that are enabled on this boot.
This service may only be called from the BSP.
@param This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
@param NumberOfProcessors Pointer to the total number of logical processors in the system,
including the BSP and disabled APs.
@param NumberOfEnabledProcessors Pointer to the number of enabled logical processors that exist
in system, including the BSP.
@retval EFI_SUCCESS Number of logical processors and enabled logical processors retrieved..
@retval EFI_DEVICE_ERROR Caller processor is AP.
@retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL
@retval EFI_INVALID_PARAMETER NumberOfEnabledProcessors is NULL
**/
EFI_STATUS
EFIAPI
GetNumberOfProcessors (
IN EFI_MP_SERVICES_PROTOCOL *This,
OUT UINTN *NumberOfProcessors,
OUT UINTN *NumberOfEnabledProcessors
);
/**
Implementation of GetNumberOfProcessors() service of MP Services Protocol.
Gets detailed MP-related information on the requested processor at the
instant this call is made. This service may only be called from the BSP.
@param This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
@param ProcessorNumber The handle number of processor.
@param ProcessorInfoBuffer A pointer to the buffer where information for the requested processor is deposited.
@retval EFI_SUCCESS Processor information successfully returned.
@retval EFI_DEVICE_ERROR Caller processor is AP.
@retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL
@retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber does not exist.
**/
EFI_STATUS
EFIAPI
GetProcessorInfo (
IN EFI_MP_SERVICES_PROTOCOL *This,
IN UINTN ProcessorNumber,
OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer
);
/**
Implementation of StartupAllAPs() service of MP Services Protocol.
This service lets the caller get all enabled APs to execute a caller-provided function.
This service may only be called from the BSP.
@param This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
@param Procedure A pointer to the function to be run on enabled APs of the system.
@param SingleThread Indicates whether to execute the function simultaneously or one by one..
@param WaitEvent The event created by the caller.
If it is NULL, then execute in blocking mode.
If it is not NULL, then execute in non-blocking mode.
@param TimeoutInMicroSeconds The time limit in microseconds for this AP to finish the function.
Zero means infinity.
@param ProcedureArgument Pointer to the optional parameter of the assigned function.
@param FailedCpuList The list of processor numbers that fail to finish the function before
TimeoutInMicrosecsond expires.
@retval EFI_SUCCESS In blocking mode, all APs have finished before the timeout expired.
@retval EFI_SUCCESS In non-blocking mode, function has been dispatched to all enabled APs.
@retval EFI_DEVICE_ERROR Caller processor is AP.
@retval EFI_NOT_STARTED No enabled AP exists in the system.
@retval EFI_NOT_READY Any enabled AP is busy.
@retval EFI_TIMEOUT In blocking mode, The timeout expired before all enabled APs have finished.
@retval EFI_INVALID_PARAMETER Procedure is NULL.
**/
EFI_STATUS
EFIAPI
StartupAllAPs (
IN EFI_MP_SERVICES_PROTOCOL *This,
IN EFI_AP_PROCEDURE Procedure,
IN BOOLEAN SingleThread,
IN EFI_EVENT WaitEvent OPTIONAL,
IN UINTN TimeoutInMicroSeconds,
IN VOID *ProcedureArgument OPTIONAL,
OUT UINTN **FailedCpuList OPTIONAL
);
/**
Implementation of StartupThisAP() service of MP Services Protocol.
This service lets the caller get one enabled AP to execute a caller-provided function.
This service may only be called from the BSP.
@param This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
@param Procedure A pointer to the function to be run on the designated AP.
@param ProcessorNumber The handle number of AP..
@param WaitEvent The event created by the caller.
If it is NULL, then execute in blocking mode.
If it is not NULL, then execute in non-blocking mode.
@param TimeoutInMicroseconds The time limit in microseconds for this AP to finish the function.
Zero means infinity.
@param ProcedureArgument Pointer to the optional parameter of the assigned function.
@param Finished Indicates whether AP has finished assigned function.
In blocking mode, it is ignored.
@retval EFI_SUCCESS In blocking mode, specified AP has finished before the timeout expires.
@retval EFI_SUCCESS In non-blocking mode, function has been dispatched to specified AP.
@retval EFI_DEVICE_ERROR Caller processor is AP.
@retval EFI_TIMEOUT In blocking mode, the timeout expires before specified AP has finished.
@retval EFI_NOT_READY Specified AP is busy.
@retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber does not exist.
@retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.
@retval EFI_INVALID_PARAMETER Procedure is NULL.
**/
EFI_STATUS
EFIAPI
StartupThisAP (
IN EFI_MP_SERVICES_PROTOCOL *This,
IN EFI_AP_PROCEDURE Procedure,
IN UINTN ProcessorNumber,
IN EFI_EVENT WaitEvent OPTIONAL,
IN UINTN TimeoutInMicroseconds,
IN VOID *ProcedureArgument OPTIONAL,
OUT BOOLEAN *Finished OPTIONAL
);
/**
Implementation of SwitchBSP() service of MP Services Protocol.
This service switches the requested AP to be the BSP from that point onward.
This service may only be called from the current BSP.
@param This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
@param ProcessorNumber The handle number of processor.
@param EnableOldBSP Whether to enable or disable the original BSP.
@retval EFI_SUCCESS BSP successfully switched.
@retval EFI_DEVICE_ERROR Caller processor is AP.
@retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber does not exist.
@retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.
@retval EFI_NOT_READY Specified AP is busy.
**/
EFI_STATUS
EFIAPI
SwitchBSP (
IN EFI_MP_SERVICES_PROTOCOL *This,
IN UINTN ProcessorNumber,
IN BOOLEAN EnableOldBSP
);
/**
Implementation of EnableDisableAP() service of MP Services Protocol.
This service lets the caller enable or disable an AP.
This service may only be called from the BSP.
@param This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
@param ProcessorNumber The handle number of processor.
@param EnableAP Indicates whether the newstate of the AP is enabled or disabled.
@param HealthFlag Indicates new health state of the AP..
@retval EFI_SUCCESS AP successfully enabled or disabled.
@retval EFI_DEVICE_ERROR Caller processor is AP.
@retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber does not exist.
@retval EFI_INVALID_PARAMETERS ProcessorNumber specifies the BSP.
**/
EFI_STATUS
EFIAPI
EnableDisableAP (
IN EFI_MP_SERVICES_PROTOCOL *This,
IN UINTN ProcessorNumber,
IN BOOLEAN EnableAP,
IN UINT32 *HealthFlag OPTIONAL
);
/**
Implementation of WhoAmI() service of MP Services Protocol.
This service lets the caller processor get its handle number.
This service may be called from the BSP and APs.
@param This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
@param ProcessorNumber Pointer to the handle number of AP.
@retval EFI_SUCCESS Processor number successfully returned.
@retval EFI_INVALID_PARAMETER ProcessorNumber is NULL
**/
EFI_STATUS
EFIAPI
WhoAmI (
IN EFI_MP_SERVICES_PROTOCOL *This,
OUT UINTN *ProcessorNumber
);
/**
Checks APs' status periodically.
This function is triggerred by timer perodically to check the
state of APs for StartupAllAPs() and StartupThisAP() executed
in non-blocking mode.
@param Event Event triggered.
@param Context Parameter passed with the event.
**/
VOID
EFIAPI
CheckAPsStatus (
IN EFI_EVENT Event,
IN VOID *Context
);
/**
Checks status of all APs.
This function checks whether all APs have finished task assigned by StartupAllAPs(),
and whether timeout expires.
@retval EFI_SUCCESS All APs have finished task assigned by StartupAllAPs().
@retval EFI_TIMEOUT The timeout expires.
@retval EFI_NOT_READY APs have not finished task and timeout has not expired.
**/
EFI_STATUS
CheckAllAPs (
VOID
);
/**
Checks status of specified AP.
This function checks whether specified AP has finished task assigned by StartupThisAP(),
and whether timeout expires.
@param ProcessorNumber The handle number of processor.
@retval EFI_SUCCESS Specified AP has finished task assigned by StartupThisAPs().
@retval EFI_TIMEOUT The timeout expires.
@retval EFI_NOT_READY Specified AP has not finished task and timeout has not expired.
**/
EFI_STATUS
CheckThisAP (
UINTN ProcessorNumber
);
/**
Calculate timeout value and return the current performance counter value.
Calculate the number of performance counter ticks required for a timeout.
If TimeoutInMicroseconds is 0, return value is also 0, which is recognized
as infinity.
@param TimeoutInMicroseconds Timeout value in microseconds.
@param CurrentTime Returns the current value of the performance counter.
@return Expected timestamp counter for timeout.
If TimeoutInMicroseconds is 0, return value is also 0, which is recognized
as infinity.
**/
UINT64
CalculateTimeout (
IN UINTN TimeoutInMicroseconds,
OUT UINT64 *CurrentTime
);
/**
Checks whether timeout expires.
Check whether the number of ellapsed performance counter ticks required for a timeout condition
has been reached. If Timeout is zero, which means infinity, return value is always FALSE.
@param PreviousTime On input, the value of the performance counter when it was last read.
On output, the current value of the performance counter
@param TotalTime The total amount of ellapsed time in performance counter ticks.
@param Timeout The number of performance counter ticks required to reach a timeout condition.
@retval TRUE A timeout condition has been reached.
@retval FALSE A timeout condition has not been reached.
**/
BOOLEAN
CheckTimeout (
IN OUT UINT64 *PreviousTime,
IN UINT64 *TotalTime,
IN UINT64 Timeout
);
/**
Searches for the next waiting AP.
Search for the next AP that is put in waiting state by single-threaded StartupAllAPs().
@param NextProcessorNumber Pointer to the processor number of the next waiting AP.
@retval EFI_SUCCESS The next waiting AP has been found.
@retval EFI_NOT_FOUND No waiting AP exists.
**/
EFI_STATUS
GetNextWaitingProcessorNumber (
OUT UINTN *NextProcessorNumber
);
/**
Wrapper function for all procedures assigned to AP.
Wrapper function for all procedures assigned to AP via MP service protocol.
It controls states of AP and invokes assigned precedure.
**/
VOID
ApProcWrapper (
VOID
);
/**
Function to wake up a specified AP and assign procedure to it.
@param ProcessorNumber Handle number of the specified processor.
@param Procedure Procedure to assign.
@param ProcArguments Argument for Procedure.
**/
VOID
WakeUpAp (
IN UINTN ProcessorNumber,
IN EFI_AP_PROCEDURE Procedure,
IN VOID *ProcArguments
);
/**
Terminate AP's task and set it to idle state.
This function terminates AP's task due to timeout by sending INIT-SIPI,
and sends it to idle state.
@param ProcessorNumber Handle number of the specified processor.
**/
VOID
ResetProcessorToIdleState (
UINTN ProcessorNumber
);
/**
Worker function of EnableDisableAP ()
Worker function of EnableDisableAP (). Changes state of specified processor.
@param ProcessorNumber Processor number of specified AP.
@param NewState Desired state of the specified AP.
@retval EFI_SUCCESS AP's state successfully changed.
**/
EFI_STATUS
ChangeCpuState (
IN UINTN ProcessorNumber,
IN BOOLEAN NewState
);
/**
Gets the processor number of BSP.
@return The processor number of BSP.
**/
UINTN
GetBspNumber (
VOID
);
/**
Get address map of RendezvousFunnelProc.
This function gets address map of RendezvousFunnelProc.
@param AddressMap Output buffer for address map information
**/
VOID
AsmGetAddressMap (
OUT MP_ASSEMBLY_ADDRESS_MAP *AddressMap
);
#endif