audk/NetworkPkg/IScsiDxe/IScsiConfigStrings.uni

90 lines
6.1 KiB
Plaintext

// *++
//
// Copyright (c) 2004 - 2011, Intel Corporation. All rights reserved.<BR>
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
// Module Name:
//
// IScsiConfigStrings.uni
//
// Abstract:
//
// String definitions for iSCSI configuration.
//
// Revision History:
//
// --*/
/=#
#langdef en-US "English"
#string STR_ISCSI_CONFIG_FORM_TITLE #language en-US "iSCSI Configuration"
#string STR_ISCSI_CONFIG_FORM_HELP #language en-US "Configure the iSCSI parameters."
#string STR_ISCSI_MAIN_FORM_TITLE #language en-US "iSCSI Configuration"
#string STR_ISCSI_MAC_FORM_TITLE #language en-US "MAC Selection"
#string STR_ISCSI_CONFIG_INIT_NAME #language en-US "iSCSI Initiator Name"
#string STR_ISCSI_CONFIG_INIT_NAME_HELP #language en-US "The worldwide unique name of iSCSI Initiator. Only IQN format is accepted."
#string STR_ISCSI_ATTEMPT_NAME #language en-US "iSCSI Attempt Name"
#string STR_ISCSI_ATTEMPT_NAME_HELP #language en-US "The human name defined for this attempt."
#string STR_ISCSI_CONFIG_RETRY #language en-US "Connection Retry Count"
#string STR_ISCSI_CONFIG_RETRY_HELP #language en-US "The minimum value is 0 and the maximum is 16. 0 means no retry."
#string STR_ISCSI_CONFIG_TIMEOUT #language en-US "Connection Establishing Timeout"
#string STR_ISCSI_CONFIG_TIMEOUT_HELP #language en-US "The timeout value in milliseconds. The minimum value is 100 milliseconds and the maximum is 20 seconds."
#string STR_ADD_ATTEMPT_ENTRY #language en-US "Add an Attempt"
#string STR_ISCSI_ATTEMPT_FORM_TITLE #language en-US "Attempt Configuration"
#string STR_DEL_ATTEMPT_ENTRY #language en-US "Delete Attempts"
#string STR_DEL_ATTEMPT_ENTRY_HELP #language en-US "Delete one or more attempts"
#string STR_ORDER_ATTEMPT_ENTRY #language en-US "Change Attempt Order"
#string STR_ISCSI_MODE_PROMPT #language en-US "iSCSI Mode"
#string STR_ISCSI_MODE_HELP #language en-US "Disabled, Enabled, Enabled for MPIO"
#string STR_ISCSI_MODE_DISABLED #language en-US "Disabled"
#string STR_ISCSI_MODE_ENABLED #language en-US "Enabled"
#string STR_ISCSI_MODE_ENABLED_FOR_MPIO #language en-US "Enabled for MPIO"
#string STR_IP_MODE_PROMPT #language en-US "Internet Protocol"
#string STR_IP_MODE_HELP #language en-US "Initiator IP address is system assigned in IP6 mode. In Autoconfigure mode, iSCSI driver will attempt to connect iSCSI target via IPv4 stack, if failed then attempt IPv6 stack."
#string STR_IP_MODE_IP4 #language en-US "IP4"
#string STR_IP_MODE_IP6 #language en-US "IP6"
#string STR_IP_MODE_AUTOCONFIG #language en-US "Autoconfigure"
#string STR_AUTHEN_TYPE_PROMPT #language en-US "Authentication Type"
#string STR_AUTHEN_TYPE_HELP #language en-US "Authentication method: CHAP, Kerberos, or None"
#string STR_AUTHEN_TYPE_CHAP #language en-US "CHAP"
#string STR_AUTHEN_TYPE_KERBEROS #language en-US "Kerberos"
#string STR_AUTHEN_TYPE_NONE #language en-US "None"
#string STR_ISCSI_LOCAL_IP_ADDRESS #language en-US " Initiator IP Address"
#string STR_ISCSI_LOCAL_MASK #language en-US " Initiator Subnet Mask"
#string STR_ISCSI_LOCAL_GATEWAY #language en-US " Gateway"
#string STR_ISCSI_IP_ADDRESS_HELP #language en-US "Enter IP address in dotted-decimal notation."
#string STR_ISCSI_TARGET_NAME #language en-US " Target Name"
#string STR_ISCSI_TARGET_NAME_HELP #language en-US "The worldwide unique name of the target. Only iqn. format is accepted."
#string STR_ISCSI_TARGET_IP_ADDRESS #language en-US " Target IP Address"
#string STR_ISCSI_TARGET_PORT #language en-US " Target Port"
#string STR_ISCSI_BOOT_LUN #language en-US " Boot LUN"
#string STR_ISCSI_BOOT_LUN_HELP #language en-US "Hexadecimal representation of the LU number. Examples are: 4752-3A4F-6b7e-2F99, 6734-9-156f-127, 4186-9"
#string STR_ISCSI_ENABLE_DHCP #language en-US "Enable DHCP"
#string STR_ISCSI_ENABLE_DHCP_ON_TARGET #language en-US "Get target info via DHCP"
#string STR_CHAP_TYPE_PROMPT #language en-US " CHAP Type"
#string STR_CHAP_TYPE_HELP #language en-US "None, One way CHAP or mutual CHAP"
#string STR_CHAP_TYPE_UNI #language en-US "One way"
#string STR_CHAP_TYPE_MUTUAL #language en-US "Mutual"
#string STR_ISCSI_CHAP_NAME #language en-US " CHAP Name"
#string STR_ISCSI_CHAP_SECRET #language en-US " CHAP Secret"
#string STR_ISCSI_CHAP_SECRET_HELP #language en-US "The minimum length is 12 bytes and the maximum length is 16 bytes."
#string STR_ISCSI_REVERSE_CHAP_NAME #language en-US " Reverse CHAP Name"
#string STR_ISCSI_REVERSE_CHAP_SECRET #language en-US " Reverse CHAP Secret"
#string STR_RETURN_MAIN_FORM #language en-US "Back to Previous Page"
#string STR_SAVE_CHANGES #language en-US "Save Changes"
#string STR_SAVE_CHANGES_HELP #language en-US "Must reboot system manually for changes to take place."
#string STR_NULL #language en-US ""
#string STR_SAVE_AND_EXIT #language en-US "Commit Changes and Exit"
#string STR_NO_SAVE_AND_EXIT #language en-US "Discard Changes and Exit"
#string STR_ISCSI_CONFIG_ISID #language en-US "ISID"
#string STR_ISCSI_CONFIG_ISID_HELP #language en-US "OUI-format ISID in 6 bytes, default value are derived from MAC address. Only last 3 bytes are configurable. Example: update 0ABBCCDDEEFF to 0ABBCCF07901 by input F07901."