audk/MdeModulePkg/Core/Dxe/FwVolDriver.h

470 lines
17 KiB
C

/** @file
Firmware File System protocol. Layers on top of Firmware
Block protocol to produce a file abstraction of FV based files.
Copyright (c) 2006 - 2008, Intel Corporation. <BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __FW_VOL_DRIVER_H_
#define __FW_VOL_DRIVER_H_
#define FV2_DEVICE_SIGNATURE EFI_SIGNATURE_32 ('_', 'F', 'V', '2')
//
// Used to track all non-deleted files
//
typedef struct {
LIST_ENTRY Link;
EFI_FFS_FILE_HEADER *FfsHeader;
UINTN StreamHandle;
} FFS_FILE_LIST_ENTRY;
typedef struct {
UINTN Signature;
EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *Fvb;
EFI_HANDLE Handle;
EFI_FIRMWARE_VOLUME2_PROTOCOL Fv;
EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader;
UINT8 *CachedFv;
UINT8 *EndOfCachedFv;
FFS_FILE_LIST_ENTRY *LastKey;
LIST_ENTRY FfsFileListHeader;
UINT8 ErasePolarity;
} FV_DEVICE;
#define FV_DEVICE_FROM_THIS(a) CR(a, FV_DEVICE, Fv, FV2_DEVICE_SIGNATURE)
/**
Retrieves attributes, insures positive polarity of attribute bits, returns
resulting attributes in output parameter.
@param This Calling context
@param Attributes output buffer which contains attributes
@retval EFI_SUCCESS Successfully got volume attributes
**/
EFI_STATUS
EFIAPI
FvGetVolumeAttributes (
IN CONST EFI_FIRMWARE_VOLUME2_PROTOCOL *This,
OUT EFI_FV_ATTRIBUTES *Attributes
);
/**
Sets current attributes for volume
@param This Calling context
@param Attributes At input, contains attributes to be set. At output
contains new value of FV
@retval EFI_UNSUPPORTED Could not be set.
**/
EFI_STATUS
EFIAPI
FvSetVolumeAttributes (
IN CONST EFI_FIRMWARE_VOLUME2_PROTOCOL *This,
IN OUT EFI_FV_ATTRIBUTES *Attributes
);
/**
Given the input key, search for the next matching file in the volume.
@param This Indicates the calling context.
@param Key Key is a pointer to a caller allocated
buffer that contains implementation specific
data that is used to track where to begin
the search for the next file. The size of
the buffer must be at least This->KeySize
bytes long. To reinitialize the search and
begin from the beginning of the firmware
volume, the entire buffer must be cleared to
zero. Other than clearing the buffer to
initiate a new search, the caller must not
modify the data in the buffer between calls
to GetNextFile().
@param FileType FileType is a pointer to a caller allocated
EFI_FV_FILETYPE. The GetNextFile() API can
filter it's search for files based on the
value of *FileType input. A *FileType input
of 0 causes GetNextFile() to search for
files of all types. If a file is found, the
file's type is returned in *FileType.
*FileType is not modified if no file is
found.
@param NameGuid NameGuid is a pointer to a caller allocated
EFI_GUID. If a file is found, the file's
name is returned in *NameGuid. *NameGuid is
not modified if no file is found.
@param Attributes Attributes is a pointer to a caller
allocated EFI_FV_FILE_ATTRIBUTES. If a file
is found, the file's attributes are returned
in *Attributes. *Attributes is not modified
if no file is found.
@param Size Size is a pointer to a caller allocated
UINTN. If a file is found, the file's size
is returned in *Size. *Size is not modified
if no file is found.
@retval EFI_SUCCESS Successfully find the file.
@retval EFI_DEVICE_ERROR Device error.
@retval EFI_ACCESS_DENIED Fv could not read.
@retval EFI_NOT_FOUND No matching file found.
@retval EFI_INVALID_PARAMETER Invalid parameter
**/
EFI_STATUS
EFIAPI
FvGetNextFile (
IN CONST EFI_FIRMWARE_VOLUME2_PROTOCOL *This,
IN OUT VOID *Key,
IN OUT EFI_FV_FILETYPE *FileType,
OUT EFI_GUID *NameGuid,
OUT EFI_FV_FILE_ATTRIBUTES *Attributes,
OUT UINTN *Size
);
/**
Locates a file in the firmware volume and
copies it to the supplied buffer.
@param This Indicates the calling context.
@param NameGuid Pointer to an EFI_GUID, which is the
filename.
@param Buffer Buffer is a pointer to pointer to a buffer
in which the file or section contents or are
returned.
@param BufferSize BufferSize is a pointer to caller allocated
UINTN. On input *BufferSize indicates the
size in bytes of the memory region pointed
to by Buffer. On output, *BufferSize
contains the number of bytes required to
read the file.
@param FoundType FoundType is a pointer to a caller allocated
EFI_FV_FILETYPE that on successful return
from Read() contains the type of file read.
This output reflects the file type
irrespective of the value of the SectionType
input.
@param FileAttributes FileAttributes is a pointer to a caller
allocated EFI_FV_FILE_ATTRIBUTES. On
successful return from Read(),
*FileAttributes contains the attributes of
the file read.
@param AuthenticationStatus AuthenticationStatus is a pointer to a
caller allocated UINTN in which the
authentication status is returned.
@retval EFI_SUCCESS Successfully read to memory buffer.
@retval EFI_WARN_BUFFER_TOO_SMALL Buffer too small.
@retval EFI_NOT_FOUND Not found.
@retval EFI_DEVICE_ERROR Device error.
@retval EFI_ACCESS_DENIED Could not read.
@retval EFI_INVALID_PARAMETER Invalid parameter.
@retval EFI_OUT_OF_RESOURCES Not enough buffer to be allocated.
**/
EFI_STATUS
EFIAPI
FvReadFile (
IN CONST EFI_FIRMWARE_VOLUME2_PROTOCOL *This,
IN CONST EFI_GUID *NameGuid,
IN OUT VOID **Buffer,
IN OUT UINTN *BufferSize,
OUT EFI_FV_FILETYPE *FoundType,
OUT EFI_FV_FILE_ATTRIBUTES *FileAttributes,
OUT UINT32 *AuthenticationStatus
);
/**
Locates a section in a given FFS File and
copies it to the supplied buffer (not including section header).
@param This Indicates the calling context.
@param NameGuid Pointer to an EFI_GUID, which is the
filename.
@param SectionType Indicates the section type to return.
@param SectionInstance Indicates which instance of sections with a
type of SectionType to return.
@param Buffer Buffer is a pointer to pointer to a buffer
in which the file or section contents or are
returned.
@param BufferSize BufferSize is a pointer to caller allocated
UINTN.
@param AuthenticationStatus AuthenticationStatus is a pointer to a
caller allocated UINT32 in which the
authentication status is returned.
@retval EFI_SUCCESS Successfully read the file section into
buffer.
@retval EFI_WARN_BUFFER_TOO_SMALL Buffer too small.
@retval EFI_NOT_FOUND Section not found.
@retval EFI_DEVICE_ERROR Device error.
@retval EFI_ACCESS_DENIED Could not read.
@retval EFI_INVALID_PARAMETER Invalid parameter.
**/
EFI_STATUS
EFIAPI
FvReadFileSection (
IN CONST EFI_FIRMWARE_VOLUME2_PROTOCOL *This,
IN CONST EFI_GUID *NameGuid,
IN EFI_SECTION_TYPE SectionType,
IN UINTN SectionInstance,
IN OUT VOID **Buffer,
IN OUT UINTN *BufferSize,
OUT UINT32 *AuthenticationStatus
);
/**
Writes one or more files to the firmware volume.
@param This Indicates the calling context.
@param NumberOfFiles Number of files.
@param WritePolicy WritePolicy indicates the level of reliability
for the write in the event of a power failure or
other system failure during the write operation.
@param FileData FileData is an pointer to an array of
EFI_FV_WRITE_DATA. Each element of array
FileData represents a file to be written.
@retval EFI_SUCCESS Files successfully written to firmware volume
@retval EFI_OUT_OF_RESOURCES Not enough buffer to be allocated.
@retval EFI_DEVICE_ERROR Device error.
@retval EFI_WRITE_PROTECTED Write protected.
@retval EFI_NOT_FOUND Not found.
@retval EFI_INVALID_PARAMETER Invalid parameter.
@retval EFI_UNSUPPORTED This function not supported.
**/
EFI_STATUS
EFIAPI
FvWriteFile (
IN CONST EFI_FIRMWARE_VOLUME2_PROTOCOL *This,
IN UINT32 NumberOfFiles,
IN EFI_FV_WRITE_POLICY WritePolicy,
IN EFI_FV_WRITE_FILE_DATA *FileData
);
/**
Return information of type InformationType for the requested firmware
volume.
@param This Pointer to EFI_FIRMWARE_VOLUME2_PROTOCOL.
@param InformationType InformationType for requested.
@param BufferSize On input, size of Buffer.On output, the amount of data
returned in Buffer.
@param Buffer A poniter to the data buffer to return.
@retval EFI_SUCCESS Successfully got volume Information.
**/
EFI_STATUS
EFIAPI
FvGetVolumeInfo (
IN CONST EFI_FIRMWARE_VOLUME2_PROTOCOL *This,
IN CONST EFI_GUID *InformationType,
IN OUT UINTN *BufferSize,
OUT VOID *Buffer
);
/**
Set information of type InformationType for the requested firmware
volume.
@param This Pointer to EFI_FIRMWARE_VOLUME2_PROTOCOL.
@param InformationType InformationType for requested.
@param BufferSize On input, size of Buffer.On output, the amount of data
returned in Buffer.
@param Buffer A poniter to the data buffer to return.
@retval EFI_SUCCESS Successfully set volume Information.
**/
EFI_STATUS
EFIAPI
FvSetVolumeInfo (
IN CONST EFI_FIRMWARE_VOLUME2_PROTOCOL *This,
IN CONST EFI_GUID *InformationType,
IN UINTN BufferSize,
IN CONST VOID *Buffer
);
//
//Internal functions
//
typedef enum {
EfiCheckSumUint8 = 0,
EfiCheckSumUint16 = 1,
EfiCheckSumUint32 = 2,
EfiCheckSumUint64 = 3,
EfiCheckSumMaximum = 4
} EFI_CHECKSUM_TYPE;
/**
Check if a block of buffer is erased.
@param ErasePolarity Erase polarity attribute of the firmware volume
@param InBuffer The buffer to be checked
@param BufferSize Size of the buffer in bytes
@retval TRUE The block of buffer is erased
@retval FALSE The block of buffer is not erased
**/
BOOLEAN
IsBufferErased (
IN UINT8 ErasePolarity,
IN VOID *InBuffer,
IN UINTN BufferSize
);
/**
Get the FFS file state by checking the highest bit set in the header's state field.
@param ErasePolarity Erase polarity attribute of the firmware volume
@param FfsHeader Points to the FFS file header
@return FFS File state
**/
EFI_FFS_FILE_STATE
GetFileState (
IN UINT8 ErasePolarity,
IN EFI_FFS_FILE_HEADER *FfsHeader
);
/**
Set the FFS file state.
@param State The state to be set.
@param FfsHeader Points to the FFS file header
@return None.
**/
VOID
SetFileState (
IN UINT8 State,
IN EFI_FFS_FILE_HEADER *FfsHeader
);
/**
Verify checksum of the firmware volume header.
@param FvHeader Points to the firmware volume header to be checked
@retval TRUE Checksum verification passed
@retval FALSE Checksum verification failed
**/
BOOLEAN
VerifyFvHeaderChecksum (
IN EFI_FIRMWARE_VOLUME_HEADER *FvHeader
);
/**
Check if it's a valid FFS file header.
@param ErasePolarity Erase polarity attribute of the firmware volume
@param FfsHeader Points to the FFS file header to be checked
@param FileState FFS file state to be returned
@retval TRUE Valid FFS file header
@retval FALSE Invalid FFS file header
**/
BOOLEAN
IsValidFfsHeader (
IN UINT8 ErasePolarity,
IN EFI_FFS_FILE_HEADER *FfsHeader,
OUT EFI_FFS_FILE_STATE *FileState
);
/**
Check if it's a valid FFS file.
Here we are sure that it has a valid FFS file header since we must call IsValidFfsHeader() first.
@param ErasePolarity Erase polarity attribute of the firmware volume
@param FfsHeader Points to the FFS file to be checked
@retval TRUE Valid FFS file
@retval FALSE Invalid FFS file
**/
BOOLEAN
IsValidFfsFile (
IN UINT8 ErasePolarity,
IN EFI_FFS_FILE_HEADER *FfsHeader
);
/**
given the supplied FW_VOL_BLOCK_PROTOCOL, allocate a buffer for output and
copy the volume header into it.
@param Fvb The FW_VOL_BLOCK_PROTOCOL instance from which to
read the volume header
@param FwVolHeader Pointer to pointer to allocated buffer in which
the volume header is returned.
@retval EFI_OUT_OF_RESOURCES No enough buffer could be allocated.
@retval EFI_SUCCESS Successfully read volume header to the allocated
buffer.
**/
EFI_STATUS
GetFwVolHeader (
IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *Fvb,
OUT EFI_FIRMWARE_VOLUME_HEADER **FwVolHeader
);
/**
Check if an FV is consistent and allocate cache for it.
@param FvDevice A pointer to the FvDevice to be checked.
@retval EFI_OUT_OF_RESOURCES No enough buffer could be allocated.
@retval EFI_SUCCESS FV is consistent and cache is allocated.
@retval EFI_VOLUME_CORRUPTED File system is corrupted.
**/
EFI_STATUS
FvCheck (
IN OUT FV_DEVICE *FvDevice
);
#endif