audk/Vlv2DeviceRefCodePkg/AcpiTablesPCAT/PchSmb.asl

840 lines
25 KiB
Plaintext

/**************************************************************************;
;* *;
;* *;
;* Intel Corporation - ACPI Reference Code for the Baytrail *;
;* Family of Customer Reference Boards. *;
;* *;
;* *;
;* Copyright (c) 1999 - 2014, Intel Corporation. All rights reserved *;
;
; This program and the accompanying materials are licensed and made available under
; the terms and conditions of the BSD License that accompanies this distribution.
; The full text of the license may be found at
; http://opensource.org/licenses/bsd-license.php.
;
; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
;* *;
;* *;
;**************************************************************************/
// Define various SMBus PCI Configuration Space Registers.
OperationRegion(SMBP,PCI_Config,0x40,0xC0)
Field(SMBP,DWordAcc,NoLock,Preserve)
{
, 2,
I2CE, 1
}
// SMBus Send Byte - This function will write a single byte of
// data to a specific Slave Device per SMBus Send Byte Protocol.
// Arg0 = Address
// Arg1 = Data
// Return: Success = 1
// Failure = 0
Method(SSXB,2,Serialized)
{
OperationRegion(SMPB,PCI_Config,0x20,4)
Field(SMPB,DWordAcc,NoLock,Preserve)
{
, 5,
SBAR, 11
}
// Define various SMBus IO Mapped Registers.
OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
Field(SMBI,ByteAcc,NoLock,Preserve)
{
HSTS, 8, // 0 - Host Status Register
Offset(0x02),
HCON, 8, // 2 - Host Control
HCOM, 8, // 3 - Host Command
TXSA, 8, // 4 - Transmit Slave Address
DAT0, 8, // 5 - Host Data 0
DAT1, 8, // 6 - Host Data 1
HBDR, 8, // 7 - Host Block Data
PECR, 8, // 8 - Packer Error Check
RXSA, 8, // 9 - Receive Slave Address
SDAT, 16, // A - Slave Data
}
// Step 1: Confirm the ICHx SMBus is ready to perform
// communication.
If(STRT())
{
Return(0)
}
// Step 2: Initiate a Send Byte.
Store(0,I2CE) // Ensure SMbus Mode.
Store(0xBF,HSTS) // Clear all but INUSE_STS.
Store(Arg0,TXSA) // Write Address in TXSA.
Store(Arg1,HCOM) // Data in HCOM.
// Set the SMBus Host control register to 0x48.
// Bit 7: = 0 = reserved
// Bit 6: = 1 = start
// Bit 5: = 0 = disregard, I2C related bit
// Bits 4:2: = 001 = Byte Protocol
// Bit 1: = 0 = Normal Function
// Bit 0: = 0 = Disable interrupt generation
Store(0x48,HCON)
// Step 3: Exit the Method correctly.
If(COMP)
{
Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others..
Return(1) // Return Success.
}
Return(0)
}
// SMBus Receive Byte - This function will write a single byte
// of data to a specific Slave Device per SMBus Receive Byte
// Protocol.
// Arg0 = Address
// Return: Success = Byte-Size Value
// Failure = Word-Size Value = FFFFh.
Method(SRXB,1,Serialized)
{
OperationRegion(SMPB,PCI_Config,0x20,4)
Field(SMPB,DWordAcc,NoLock,Preserve)
{
, 5,
SBAR, 11
}
// Define various SMBus IO Mapped Registers.
OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
Field(SMBI,ByteAcc,NoLock,Preserve)
{
HSTS, 8, // 0 - Host Status Register
Offset(0x02),
HCON, 8, // 2 - Host Control
HCOM, 8, // 3 - Host Command
TXSA, 8, // 4 - Transmit Slave Address
DAT0, 8, // 5 - Host Data 0
DAT1, 8, // 6 - Host Data 1
HBDR, 8, // 7 - Host Block Data
PECR, 8, // 8 - Packer Error Check
RXSA, 8, // 9 - Receive Slave Address
SDAT, 16, // A - Slave Data
}
// Step 1: Confirm the ICHx SMBus is ready to perform
// communication.
If(STRT())
{
Return(0xFFFF)
}
// Step 2: Initiate a Receive Byte.
Store(0,I2CE) // Ensure SMbus Mode.
Store(0xBF,HSTS) // Clear all but INUSE_STS.
Store(Or(Arg0,1),TXSA) // Read Address in TXSA.
// Set the SMBus Host control register to 0x48.
// Bit 7: = 0 = reserved
// Bit 6: = 1 = start
// Bit 5: = 0 = disregard, I2C related bit
// Bits 4:2: = 001 = Byte Protocol
// Bit 1: = 0 = Normal Function
// Bit 0: = 0 = Disable interrupt generation
Store(0x44,HCON)
// Step 3: Exit the Method correctly.
If(COMP)
{
Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others..
Return(DAT0) // Return Success.
}
Return(0xFFFF) // Return Failure.
}
// SMBus Write Byte - This function will write a single byte
// of data to a specific Slave Device per SMBus Write Byte
// Protocol.
// Arg0 = Address
// Arg1 = Command
// Arg2 = Data
// Return: Success = 1
// Failure = 0
Method(SWRB,3,Serialized)
{
OperationRegion(SMPB,PCI_Config,0x20,4)
Field(SMPB,DWordAcc,NoLock,Preserve)
{
, 5,
SBAR, 11
}
// Define various SMBus IO Mapped Registers.
OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
Field(SMBI,ByteAcc,NoLock,Preserve)
{
HSTS, 8, // 0 - Host Status Register
Offset(0x02),
HCON, 8, // 2 - Host Control
HCOM, 8, // 3 - Host Command
TXSA, 8, // 4 - Transmit Slave Address
DAT0, 8, // 5 - Host Data 0
DAT1, 8, // 6 - Host Data 1
HBDR, 8, // 7 - Host Block Data
PECR, 8, // 8 - Packer Error Check
RXSA, 8, // 9 - Receive Slave Address
SDAT, 16, // A - Slave Data
}
// Step 1: Confirm the ICHx SMBus is ready to perform communication.
If(STRT())
{
Return(0)
}
// Step 2: Initiate a Write Byte.
Store(0,I2CE) // Ensure SMbus Mode.
Store(0xBF,HSTS) // Clear all but INUSE_STS.
Store(Arg0,TXSA) // Write Address in TXSA.
Store(Arg1,HCOM) // Command in HCOM.
Store(Arg2,DAT0) // Data in DAT0.
// Set the SMBus Host control register to 0x48.
// Bit 7: = 0 = reserved
// Bit 6: = 1 = start
// Bit 5: = 0 = disregard, I2C related bit
// Bits 4:2: = 010 = Byte Data Protocol
// Bit 1: = 0 = Normal Function
// Bit 0: = 0 = Disable interrupt generation
Store(0x48,HCON)
// Step 3: Exit the Method correctly.
If(COMP)
{
Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others..
Return(1) // Return Success.
}
Return(0) // Return Failure.
}
// SMBus Read Byte - This function will read a single byte of data
// from a specific slave device per SMBus Read Byte Protocol.
// Arg0 = Address
// Arg1 = Command
// Return: Success = Byte-Size Value
// Failure = Word-Size Value
Method(SRDB,2,Serialized)
{
OperationRegion(SMPB,PCI_Config,0x20,4)
Field(SMPB,DWordAcc,NoLock,Preserve)
{
, 5,
SBAR, 11
}
// Define various SMBus IO Mapped Registers.
OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
Field(SMBI,ByteAcc,NoLock,Preserve)
{
HSTS, 8, // 0 - Host Status Register
Offset(0x02),
HCON, 8, // 2 - Host Control
HCOM, 8, // 3 - Host Command
TXSA, 8, // 4 - Transmit Slave Address
DAT0, 8, // 5 - Host Data 0
DAT1, 8, // 6 - Host Data 1
HBDR, 8, // 7 - Host Block Data
PECR, 8, // 8 - Packer Error Check
RXSA, 8, // 9 - Receive Slave Address
SDAT, 16, // A - Slave Data
}
// Step 1: Confirm the ICHx SMBus is ready to perform communication.
If(STRT())
{
Return(0xFFFF)
}
// Step 2: Initiate a Read Byte.
Store(0,I2CE) // Ensure SMbus Mode.
Store(0xBF,HSTS) // Clear all but INUSE_STS.
Store(Or(Arg0,1),TXSA) // Read Address in TXSA.
Store(Arg1,HCOM) // Command in HCOM.
// Set the SMBus Host control register to 0x48.
// Bit 7: = 0 = reserved
// Bit 6: = 1 = start
// Bit 5: = 0 = disregard, I2C related bit
// Bits 4:2: = 010 = Byte Data Protocol
// Bit 1: = 0 = Normal Function
// Bit 0: = 0 = Disable interrupt generation
Store(0x48,HCON)
// Step 3: Exit the Method correctly.
If(COMP)
{
Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others..
Return(DAT0) // Return Success.
}
Return(0xFFFF) // Return Failure.
}
// SMBus Write Word - This function will write a single word
// of data to a specific Slave Device per SMBus Write Word
// Protocol.
// Arg0 = Address
// Arg1 = Command
// Arg2 = Data (16 bits in size)
// Return: Success = 1
// Failure = 0
Method(SWRW,3,Serialized)
{
OperationRegion(SMPB,PCI_Config,0x20,4)
Field(SMPB,DWordAcc,NoLock,Preserve)
{
, 5,
SBAR, 11
}
// Define various SMBus IO Mapped Registers.
OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
Field(SMBI,ByteAcc,NoLock,Preserve)
{
HSTS, 8, // 0 - Host Status Register
Offset(0x02),
HCON, 8, // 2 - Host Control
HCOM, 8, // 3 - Host Command
TXSA, 8, // 4 - Transmit Slave Address
DAT0, 8, // 5 - Host Data 0
DAT1, 8, // 6 - Host Data 1
HBDR, 8, // 7 - Host Block Data
PECR, 8, // 8 - Packer Error Check
RXSA, 8, // 9 - Receive Slave Address
SDAT, 16, // A - Slave Data
}
// Step 1: Confirm the ICHx SMBus is ready to perform communication.
If(STRT())
{
Return(0)
}
// Step 2: Initiate a Write Word.
Store(0,I2CE) // Ensure SMbus Mode.
Store(0xBF,HSTS) // Clear all but INUSE_STS.
Store(Arg0,TXSA) // Write Address in TXSA.
Store(Arg1,HCOM) // Command in HCOM.
And(Arg2,0xFF,DAT1) // Low byte Data in DAT1.
And(ShiftRight(Arg2,8),0xFF,DAT0) // High byte Data in DAT0.
// Set the SMBus Host control register to 0x4C.
// Bit 7: = 0 = reserved
// Bit 6: = 1 = start
// Bit 5: = 0 = disregard, I2C related bit
// Bits 4:2: = 011 = Word Data Protocol
// Bit 1: = 0 = Normal Function
// Bit 0: = 0 = Disable interrupt generation
Store(0x4C,HCON)
// Step 3: Exit the Method correctly.
If(COMP())
{
Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others.
Return(1) // Return Success.
}
Return(0) // Return Failure.
}
// SMBus Read Word - This function will read a single byte of data
// from a specific slave device per SMBus Read Word Protocol.
// Arg0 = Address
// Arg1 = Command
// Return: Success = Word-Size Value
// Failure = Dword-Size Value
Method(SRDW,2,Serialized)
{
OperationRegion(SMPB,PCI_Config,0x20,4)
Field(SMPB,DWordAcc,NoLock,Preserve)
{
, 5,
SBAR, 11
}
// Define various SMBus IO Mapped Registers.
OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
Field(SMBI,ByteAcc,NoLock,Preserve)
{
HSTS, 8, // 0 - Host Status Register
Offset(0x02),
HCON, 8, // 2 - Host Control
HCOM, 8, // 3 - Host Command
TXSA, 8, // 4 - Transmit Slave Address
DAT0, 8, // 5 - Host Data 0
DAT1, 8, // 6 - Host Data 1
HBDR, 8, // 7 - Host Block Data
PECR, 8, // 8 - Packer Error Check
RXSA, 8, // 9 - Receive Slave Address
SDAT, 16, // A - Slave Data
}
// Step 1: Confirm the ICHx SMBus is ready to perform communication.
If(STRT())
{
Return(0xFFFF)
}
// Step 2: Initiate a Read Word.
Store(0,I2CE) // Ensure SMbus Mode.
Store(0xBF,HSTS) // Clear all but INUSE_STS.
Store(Or(Arg0,1),TXSA) // Read Address in TXSA.
Store(Arg1,HCOM) // Command in HCOM.
// Set the SMBus Host control register to 0x4C.
// Bit 7: = 0 = reserved
// Bit 6: = 1 = start
// Bit 5: = 0 = disregard, I2C related bit
// Bits 4:2: = 011 = Word Data Protocol
// Bit 1: = 0 = Normal Function
// Bit 0: = 0 = Disable interrupt generation
Store(0x4C,HCON)
// Step 3: Exit the Method correctly.
If(COMP())
{
Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others.
Return(Or(ShiftLeft(DAT0,8),DAT1)) // Return Success.
}
Return(0xFFFFFFFF) // Return Failure.
}
// SMBus Block Write - This function will write an entire block of data
// to a specific slave device per SMBus Block Write Protocol.
// Arg0 = Address
// Arg1 = Command
// Arg2 = Buffer of Data to Write
// Arg3 = 1 = I2C Block Write, 0 = SMBus Block Write
// Return: Success = 1
// Failure = 0
Method(SBLW,4,Serialized)
{
OperationRegion(SMPB,PCI_Config,0x20,4)
Field(SMPB,DWordAcc,NoLock,Preserve)
{
, 5,
SBAR, 11
}
// Define various SMBus IO Mapped Registers.
OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
Field(SMBI,ByteAcc,NoLock,Preserve)
{
HSTS, 8, // 0 - Host Status Register
Offset(0x02),
HCON, 8, // 2 - Host Control
HCOM, 8, // 3 - Host Command
TXSA, 8, // 4 - Transmit Slave Address
DAT0, 8, // 5 - Host Data 0
DAT1, 8, // 6 - Host Data 1
HBDR, 8, // 7 - Host Block Data
PECR, 8, // 8 - Packer Error Check
RXSA, 8, // 9 - Receive Slave Address
SDAT, 16, // A - Slave Data
}
// Step 1: Confirm the ICHx SMBus is ready to perform communication.
If(STRT())
{
Return(0)
}
// Step 2: Initiate a Block Write.
Store(Arg3,I2CE) // Select the proper protocol.
Store(0xBF,HSTS) // Clear all but INUSE_STS.
Store(Arg0,TXSA) // Write Address in TXSA.
Store(Arg1,HCOM) // Command in HCOM.
Store(Sizeof(Arg2),DAT0) // Count in DAT0.
Store(0,Local1) // Init Pointer to Buffer.
Store(DerefOf(Index(Arg2,0)),HBDR) // First Byte in HBD Register.
// Set the SMBus Host control register to 0x48.
// Bit 7: = 0 = reserved
// Bit 6: = 1 = start
// Bit 5: = 0 = disregard, I2C related bit
// Bits 4:2: = 101 = Block Protocol
// Bit 1: = 0 = Normal Function
// Bit 0: = 0 = Disable interrupt generation
Store(0x54,HCON)
// Step 3: Send the entire Block of Data.
While(LGreater(Sizeof(Arg2),Local1))
{
// Wait up to 200ms for Host Status to get set.
Store(4000,Local0) // 4000 * 50us = 200ms.
While(LAnd(LNot(And(HSTS,0x80)),Local0))
{
Decrement(Local0) // Decrement Count.
Stall(50) // Delay = 50us.
}
If(LNot(Local0)) // Timeout?
{
KILL() // Yes. Kill Communication.
Return(0) // Return failure.
}
Store(0x80,HSTS) // Clear Host Status.
Increment(Local1) // Point to Next Byte.
// Place next byte in HBDR if last byte has not been sent.
If(LGreater(Sizeof(Arg2),Local1))
{
Store(DerefOf(Index(Arg2,Local1)),HBDR)
}
}
// Step 4: Exit the Method correctly.
If(COMP())
{
Or(HSTS,0xFF,HSTS) // Clear all status bits.
Return(1) // Return Success.
}
Return(0) // Return Failure.
}
// SMBus Block Read - This function will read a block of data from
// a specific slave device per SMBus Block Read Protocol.
// Arg0 = Address
// Arg1 = Command
// Arg2 = 1 = I2C Block Write, 0 = SMBus Block Write
// Return: Success = Data Buffer (First Byte = length)
// Failure = 0
Method(SBLR,3,Serialized)
{
OperationRegion(SMPB,PCI_Config,0x20,4)
Field(SMPB,DWordAcc,NoLock,Preserve)
{
, 5,
SBAR, 11
}
// Define various SMBus IO Mapped Registers.
OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
Field(SMBI,ByteAcc,NoLock,Preserve)
{
HSTS, 8, // 0 - Host Status Register
Offset(0x02),
HCON, 8, // 2 - Host Control
HCOM, 8, // 3 - Host Command
TXSA, 8, // 4 - Transmit Slave Address
DAT0, 8, // 5 - Host Data 0
DAT1, 8, // 6 - Host Data 1
HBDR, 8, // 7 - Host Block Data
PECR, 8, // 8 - Packer Error Check
RXSA, 8, // 9 - Receive Slave Address
SDAT, 16, // A - Slave Data
}
Name(TBUF, Buffer(256) {})
// Step 1: Confirm the ICHx SMBus is ready to perform communication.
If(STRT())
{
Return(0)
}
// Step 2: Initiate a Block Read.
Store(Arg2,I2CE) // Select the proper protocol.
Store(0xBF,HSTS) // Clear all but INUSE_STS.
Store(Or(Arg0,1),TXSA) // Read Address in TXSA.
Store(Arg1,HCOM) // Command in HCOM.
// Set the SMBus Host control register to 0x48.
// Bit 7: = 0 = reserved
// Bit 6: = 1 = start
// Bit 5: = 0 = disregard, I2C related bit
// Bits 4:2: = 101 = Block Protocol
// Bit 1: = 0 = Normal Function
// Bit 0: = 0 = Disable interrupt generation
Store(0x54,HCON)
// Step 3: Wait up to 200ms to get the Data Count.
Store(4000,Local0) // 4000 * 50us = 200ms.
While(LAnd(LNot(And(HSTS,0x80)),Local0))
{
Decrement(Local0) // Decrement Count.
Stall(50) // Delay = 50us.
}
If(LNot(Local0)) // Timeout?
{
KILL() // Yes. Kill Communication.
Return(0) // Return failure.
}
Store(DAT0,Index(TBUF,0)) // Get the Data Count.
Store(0x80,HSTS) // Clear Host Status.
Store(1,Local1) // Local1 = Buffer Pointer.
// Step 4: Get the Block Data and store it.
While(LLess(Local1,DerefOf(Index(TBUF,0))))
{
// Wait up to 200ms for Host Status to get set.
Store(4000,Local0) // 4000 * 50us = 200ms.
While(LAnd(LNot(And(HSTS,0x80)),Local0))
{
Decrement(Local0) // Decrement Count.
Stall(50) // Delay = 50us.
}
If(LNot(Local0)) // Timeout?
{
KILL() // Yes. Kill Communication.
Return(0) // Return failure.
}
Store(HBDR,Index(TBUF,Local1)) // Place into Buffer.
Store(0x80,HSTS) // Clear Host Status.
Increment(Local1)
}
// Step 5: Exit the Method correctly.
If(COMP())
{
Or(HSTS,0xFF,HSTS) // Clear INUSE_STS and others.
Return(TBUF) // Return Success.
}
Return(0) // Return Failure.
}
// SMBus Start Check
// Return: Success = 0
// Failure = 1
Method(STRT,0,Serialized)
{
OperationRegion(SMPB,PCI_Config,0x20,4)
Field(SMPB,DWordAcc,NoLock,Preserve)
{
, 5,
SBAR, 11
}
// Define various SMBus IO Mapped Registers.
OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
Field(SMBI,ByteAcc,NoLock,Preserve)
{
HSTS, 8, // 0 - Host Status Register
Offset(0x02),
HCON, 8, // 2 - Host Control
HCOM, 8, // 3 - Host Command
TXSA, 8, // 4 - Transmit Slave Address
DAT0, 8, // 5 - Host Data 0
DAT1, 8, // 6 - Host Data 1
HBDR, 8, // 7 - Host Block Data
PECR, 8, // 8 - Packer Error Check
RXSA, 8, // 9 - Receive Slave Address
SDAT, 16, // A - Slave Data
}
// Wait up to 200ms to confirm the SMBus Semaphore has been
// released (In Use Status = 0). Note that the Sleep time may take
// longer as the This function will yield the Processor such that it
// may perform different tasks during the delay.
Store(200,Local0) // 200 * 1ms = 200ms.
While(Local0)
{
If(And(HSTS,0x40)) // In Use Set?
{
Decrement(Local0) // Yes. Decrement Count.
Sleep(1) // Delay = 1ms.
If(LEqual(Local0,0)) // Count = 0?
{
Return(1) // Return failure.
}
}
Else
{
Store(0,Local0) // In Use Clear. Continue.
}
}
// In Use Status = 0 during last read, which will make subsequent
// reads return In Use Status = 1 until software clears it. All
// software using ICHx SMBus should check this bit before initiating
// any SMBus communication.
// Wait up to 200ms to confirm the Host Interface is
// not processing a command.
Store(4000,Local0) // 4000 * 50us = 200ms.
While(Local0)
{
If(And(HSTS,0x01)) // Host Busy Set?
{
Decrement(Local0) // Decrement Count.
Stall(50) // Delay = 50us.
If(LEqual(Local0,0)) // Count = 0?
{
KILL() // Yes. Kill Communication.
}
}
Else
{
Return(0)
}
}
Return(1) // Timeout. Return failure.
}
// SMBus Completion Check
// Return: Success = 1
// Failure = 0
Method(COMP,0,Serialized)
{
OperationRegion(SMPB,PCI_Config,0x20,4)
Field(SMPB,DWordAcc,NoLock,Preserve)
{
, 5,
SBAR, 11
}
// Define various SMBus IO Mapped Registers.
OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
Field(SMBI,ByteAcc,NoLock,Preserve)
{
HSTS, 8, // 0 - Host Status Register
Offset(0x02),
HCON, 8, // 2 - Host Control
HCOM, 8, // 3 - Host Command
TXSA, 8, // 4 - Transmit Slave Address
DAT0, 8, // 5 - Host Data 0
DAT1, 8, // 6 - Host Data 1
HBDR, 8, // 7 - Host Block Data
PECR, 8, // 8 - Packer Error Check
RXSA, 8, // 9 - Receive Slave Address
SDAT, 16, // A - Slave Data
}
// Wait for up to 200ms for the Completion Command
// Status to get set.
Store(4000,Local0) // 4000 * 50us = 200ms.
While(Local0)
{
If(And(HSTS,0x02)) // Completion Status Set?
{
Return(1) // Yes. We are done.
}
Else
{
Decrement(Local0) // Decrement Count.
Stall(50) // Delay 50us.
If(LEqual(Local0,0)) // Count = 0?
{
KILL() // Yes. Kill Communication.
}
}
}
Return(0) // Timeout. Return Failure.
}
// SMBus Kill Command
Method(KILL,0,Serialized)
{
OperationRegion(SMPB,PCI_Config,0x20,4)
Field(SMPB,DWordAcc,NoLock,Preserve)
{
, 5,
SBAR, 11
}
// Define various SMBus IO Mapped Registers.
OperationRegion(SMBI,SystemIO,ShiftLeft(SBAR,5),0x10)
Field(SMBI,ByteAcc,NoLock,Preserve)
{
HSTS, 8, // 0 - Host Status Register
Offset(0x02),
HCON, 8, // 2 - Host Control
HCOM, 8, // 3 - Host Command
TXSA, 8, // 4 - Transmit Slave Address
DAT0, 8, // 5 - Host Data 0
DAT1, 8, // 6 - Host Data 1
HBDR, 8, // 7 - Host Block Data
PECR, 8, // 8 - Packer Error Check
RXSA, 8, // 9 - Receive Slave Address
SDAT, 16, // A - Slave Data
}
Or(HCON,0x02,HCON) // Yes. Send Kill command.
Or(HSTS,0xFF,HSTS) // Clear all status.
}