audk/IntelFrameworkModulePkg/Csm/BiosThunk/BlockIoDxe/BiosBlkIo.h

440 lines
15 KiB
C

/** @file
Copyright (c) 1999 - 2010, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _BIOS_BLOCK_IO_H_
#define _BIOS_BLOCK_IO_H_
#include <Uefi.h>
#include <Protocol/BlockIo.h>
#include <Protocol/PciIo.h>
#include <Protocol/LegacyBios.h>
#include <Protocol/DevicePath.h>
#include <Guid/LegacyBios.h>
#include <Library/UefiDriverEntryPoint.h>
#include <Library/DebugLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Library/DevicePathLib.h>
#include <Library/MemoryAllocationLib.h>
#include <IndustryStandard/Pci.h>
#include "Edd.h"
#define UNKNOWN_DEVICE_GUID \
{ 0xcf31fac5, 0xc24e, 0x11d2, {0x85, 0xf3, 0x0, 0xa0, 0xc9, 0x3e, 0xc9, 0x3b} }
typedef struct {
VENDOR_DEVICE_PATH DevicePath;
UINT8 LegacyDriveLetter;
} UNKNOWN_DEVICE_VENDOR_DEVICE_PATH;
//
// Global Variables
//
extern EFI_COMPONENT_NAME_PROTOCOL gBiosBlockIoComponentName;
extern EFI_COMPONENT_NAME2_PROTOCOL gBiosBlockIoComponentName2;
//
// Define the I2O class code
//
#define PCI_BASE_CLASS_INTELLIGENT 0x0e
#define PCI_SUB_CLASS_INTELLIGENT 0x00
//
// Number of pages needed for our buffer under 1MB
//
#define BLOCK_IO_BUFFER_PAGE_SIZE (((sizeof (EDD_DEVICE_ADDRESS_PACKET) + sizeof (BIOS_LEGACY_DRIVE) + MAX_EDD11_XFER) / EFI_PAGE_SIZE) + 1 \
)
//
// Driver Binding Protocol functions
//
/**
Check whether the driver supports this device.
@param This The Udriver binding protocol.
@param Controller The controller handle to check.
@param RemainingDevicePath The remaining device path.
@retval EFI_SUCCESS The driver supports this controller.
@retval other This device isn't supported.
**/
EFI_STATUS
EFIAPI
BiosBlockIoDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Starts the device with this driver.
@param This The driver binding instance.
@param Controller Handle of device to bind driver to.
@param RemainingDevicePath Optional parameter use to pick a specific child
device to start.
@retval EFI_SUCCESS The controller is controlled by the driver.
@retval Other This controller cannot be started.
**/
EFI_STATUS
EFIAPI
BiosBlockIoDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Stop the device handled by this driver.
@param This The driver binding protocol.
@param Controller The controller to release.
@param NumberOfChildren The number of handles in ChildHandleBuffer.
@param ChildHandleBuffer The array of child handle.
@retval EFI_SUCCESS The device was stopped.
@retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
@retval Others Fail to uninstall protocols attached on the device.
**/
EFI_STATUS
EFIAPI
BiosBlockIoDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
);
//
// Other internal functions
//
/**
Build device path for EDD 3.0.
@param BaseDevicePath Base device path.
@param Drive Legacy drive.
@param DevicePath Device path for output.
@retval EFI_SUCCESS The device path is built successfully.
@retval EFI_UNSUPPORTED It is failed to built device path.
**/
EFI_STATUS
BuildEdd30DevicePath (
IN EFI_DEVICE_PATH_PROTOCOL *BaseDevicePath,
IN BIOS_LEGACY_DRIVE *Drive,
IN EFI_DEVICE_PATH_PROTOCOL **DevicePath
);
/**
Initialize block I/O device instance
@param Dev Instance of block I/O device instance
@retval TRUE Initialization succeeds.
@retval FALSE Initialization fails.
**/
BOOLEAN
BiosInitBlockIo (
IN BIOS_BLOCK_IO_DEV *Dev
);
/**
Read BufferSize bytes from Lba into Buffer.
@param This Indicates a pointer to the calling context.
@param MediaId Id of the media, changes every time the media is replaced.
@param Lba The starting Logical Block Address to read from
@param BufferSize Size of Buffer, must be a multiple of device block size.
@param Buffer A pointer to the destination buffer for the data. The caller is
responsible for either having implicit or explicit ownership of the buffer.
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
EFI_STATUS
EFIAPI
Edd30BiosReadBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
);
/**
Write BufferSize bytes from Lba into Buffer.
@param This Indicates a pointer to the calling context.
@param MediaId The media ID that the write request is for.
@param Lba The starting logical block address to be written. The caller is
responsible for writing to only legitimate locations.
@param BufferSize Size of Buffer, must be a multiple of device block size.
@param Buffer A pointer to the source buffer for the data.
@retval EFI_SUCCESS The data was written correctly to the device.
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
EFI_STATUS
EFIAPI
Edd30BiosWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
);
/**
Flush the Block Device.
@param This Indicates a pointer to the calling context.
@retval EFI_SUCCESS All outstanding data was written to the device
@retval EFI_DEVICE_ERROR The device reported an error while writting back the data
@retval EFI_NO_MEDIA There is no media in the device.
**/
EFI_STATUS
EFIAPI
BiosBlockIoFlushBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This
);
/**
Reset the Block Device.
@param This Indicates a pointer to the calling context.
@param ExtendedVerification Driver may perform diagnostics on reset.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning properly and could
not be reset.
**/
EFI_STATUS
EFIAPI
BiosBlockIoReset (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
);
/**
Read BufferSize bytes from Lba into Buffer.
@param This Indicates a pointer to the calling context.
@param MediaId Id of the media, changes every time the media is replaced.
@param Lba The starting Logical Block Address to read from
@param BufferSize Size of Buffer, must be a multiple of device block size.
@param Buffer A pointer to the destination buffer for the data. The caller is
responsible for either having implicit or explicit ownership of the buffer.
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
EFI_STATUS
EFIAPI
Edd11BiosReadBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
);
/**
Write BufferSize bytes from Lba into Buffer.
@param This Indicates a pointer to the calling context.
@param MediaId The media ID that the write request is for.
@param Lba The starting logical block address to be written. The caller is
responsible for writing to only legitimate locations.
@param BufferSize Size of Buffer, must be a multiple of device block size.
@param Buffer A pointer to the source buffer for the data.
@retval EFI_SUCCESS The data was written correctly to the device.
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
EFI_STATUS
EFIAPI
Edd11BiosWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
);
/**
Read BufferSize bytes from Lba into Buffer.
@param This Indicates a pointer to the calling context.
@param MediaId Id of the media, changes every time the media is replaced.
@param Lba The starting Logical Block Address to read from
@param BufferSize Size of Buffer, must be a multiple of device block size.
@param Buffer A pointer to the destination buffer for the data. The caller is
responsible for either having implicit or explicit ownership of the buffer.
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
EFI_STATUS
EFIAPI
BiosReadLegacyDrive (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
);
/**
Write BufferSize bytes from Lba into Buffer.
@param This Indicates a pointer to the calling context.
@param MediaId The media ID that the write request is for.
@param Lba The starting logical block address to be written. The caller is
responsible for writing to only legitimate locations.
@param BufferSize Size of Buffer, must be a multiple of device block size.
@param Buffer A pointer to the source buffer for the data.
@retval EFI_SUCCESS The data was written correctly to the device.
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
EFI_STATUS
EFIAPI
BiosWriteLegacyDrive (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
);
/**
Gets parameters of block I/O device.
@param BiosBlockIoDev Instance of block I/O device.
@param Drive Legacy drive.
@return Result of device parameter retrieval.
**/
UINTN
Int13GetDeviceParameters (
IN BIOS_BLOCK_IO_DEV *BiosBlockIoDev,
IN BIOS_LEGACY_DRIVE *Drive
);
/**
Extension of INT13 call.
@param BiosBlockIoDev Instance of block I/O device.
@param Drive Legacy drive.
@return Result of this extension.
**/
UINTN
Int13Extensions (
IN BIOS_BLOCK_IO_DEV *BiosBlockIoDev,
IN BIOS_LEGACY_DRIVE *Drive
);
/**
Gets parameters of legacy drive.
@param BiosBlockIoDev Instance of block I/O device.
@param Drive Legacy drive.
@return Result of drive parameter retrieval.
**/
UINTN
GetDriveParameters (
IN BIOS_BLOCK_IO_DEV *BiosBlockIoDev,
IN BIOS_LEGACY_DRIVE *Drive
);
/**
Build device path for device.
@param BaseDevicePath Base device path.
@param Drive Legacy drive.
@param DevicePath Device path for output.
**/
VOID
SetBiosInitBlockIoDevicePath (
IN EFI_DEVICE_PATH_PROTOCOL *BaseDevicePath,
IN BIOS_LEGACY_DRIVE *Drive,
OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
);
#endif