mirror of https://github.com/acidanthera/audk.git
337 lines
12 KiB
C
337 lines
12 KiB
C
/** @file
|
|
*
|
|
* Copyright (c) 2011, ARM Limited. All rights reserved.
|
|
*
|
|
* This program and the accompanying materials
|
|
* are licensed and made available under the terms and conditions of the BSD License
|
|
* which accompanies this distribution. The full text of the license may be found at
|
|
* http://opensource.org/licenses/bsd-license.php
|
|
*
|
|
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
*
|
|
**/
|
|
|
|
#ifndef _PL341DMC_H_
|
|
#define _PL341DMC_H_
|
|
|
|
|
|
typedef struct {
|
|
UINTN HasQos; // has QoS registers
|
|
UINTN MaxChip; // number of memory chips accessible
|
|
BOOLEAN IsUserCfg;
|
|
UINT32 User0Cfg;
|
|
UINT32 User2Cfg;
|
|
UINT32 RefreshPeriod;
|
|
UINT32 CasLatency;
|
|
UINT32 WriteLatency;
|
|
UINT32 t_mrd;
|
|
UINT32 t_ras;
|
|
UINT32 t_rc;
|
|
UINT32 t_rcd;
|
|
UINT32 t_rfc;
|
|
UINT32 t_rp;
|
|
UINT32 t_rrd;
|
|
UINT32 t_wr;
|
|
UINT32 t_wtr;
|
|
UINT32 t_xp;
|
|
UINT32 t_xsr;
|
|
UINT32 t_esr;
|
|
UINT32 MemoryCfg;
|
|
UINT32 MemoryCfg2;
|
|
UINT32 MemoryCfg3;
|
|
UINT32 ChipCfg0;
|
|
UINT32 ChipCfg1;
|
|
UINT32 ChipCfg2;
|
|
UINT32 ChipCfg3;
|
|
UINT32 t_faw;
|
|
UINT32 t_data_en;
|
|
UINT32 t_wdata_en;
|
|
UINT32 ModeReg;
|
|
UINT32 ExtModeReg;
|
|
} PL341_DMC_CONFIG;
|
|
|
|
/* Memory config bit fields */
|
|
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_9 0x1
|
|
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_10 0x2
|
|
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_11 0x3
|
|
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_12 0x4
|
|
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_11 (0x0 << 3)
|
|
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_12 (0x1 << 3)
|
|
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_13 (0x2 << 3)
|
|
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_14 (0x3 << 3)
|
|
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_15 (0x4 << 3)
|
|
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_16 (0x5 << 3)
|
|
#define DMC_MEMORY_CONFIG_BURST_2 (0x1 << 15)
|
|
#define DMC_MEMORY_CONFIG_BURST_4 (0x2 << 15)
|
|
#define DMC_MEMORY_CONFIG_BURST_8 (0x3 << 15)
|
|
#define DMC_MEMORY_CONFIG_BURST_16 (0x4 << 15)
|
|
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_1 (0x0 << 21)
|
|
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_2 (0x1 << 21)
|
|
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_3 (0x2 << 21)
|
|
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_4 (0x3 << 21)
|
|
|
|
#define DMC_MEMORY_CFG2_CLK_ASYNC (0x0 << 0)
|
|
#define DMC_MEMORY_CFG2_CLK_SYNC (0x1 << 0)
|
|
#define DMC_MEMORY_CFG2_DQM_INIT (0x1 << 2)
|
|
#define DMC_MEMORY_CFG2_CKE_INIT (0x1 << 3)
|
|
#define DMC_MEMORY_CFG2_BANK_BITS_2 (0x0 << 4)
|
|
#define DMC_MEMORY_CFG2_BANK_BITS_3 (0x3 << 4)
|
|
#define DMC_MEMORY_CFG2_MEM_WIDTH_16 (0x0 << 6)
|
|
#define DMC_MEMORY_CFG2_MEM_WIDTH_32 (0x1 << 6)
|
|
#define DMC_MEMORY_CFG2_MEM_WIDTH_64 (0x2 << 6)
|
|
#define DMC_MEMORY_CFG2_MEM_WIDTH_RESERVED (0x3 << 6)
|
|
|
|
//
|
|
// DMC Configuration Register Map
|
|
//
|
|
#define DMC_STATUS_REG 0x00
|
|
#define DMC_COMMAND_REG 0x04
|
|
#define DMC_DIRECT_CMD_REG 0x08
|
|
#define DMC_MEMORY_CONFIG_REG 0x0C
|
|
#define DMC_REFRESH_PRD_REG 0x10
|
|
#define DMC_CAS_LATENCY_REG 0x14
|
|
#define DMC_WRITE_LATENCY_REG 0x18
|
|
#define DMC_T_MRD_REG 0x1C
|
|
#define DMC_T_RAS_REG 0x20
|
|
#define DMC_T_RC_REG 0x24
|
|
#define DMC_T_RCD_REG 0x28
|
|
#define DMC_T_RFC_REG 0x2C
|
|
#define DMC_T_RP_REG 0x30
|
|
#define DMC_T_RRD_REG 0x34
|
|
#define DMC_T_WR_REG 0x38
|
|
#define DMC_T_WTR_REG 0x3C
|
|
#define DMC_T_XP_REG 0x40
|
|
#define DMC_T_XSR_REG 0x44
|
|
#define DMC_T_ESR_REG 0x48
|
|
#define DMC_MEMORY_CFG2_REG 0x4C
|
|
#define DMC_MEMORY_CFG3_REG 0x50
|
|
#define DMC_T_FAW_REG 0x54
|
|
#define DMC_T_RDATA_EN 0x5C /* DFI read data enable register */
|
|
#define DMC_T_WRLAT_DIFF 0x60 /* DFI write data enable register */
|
|
|
|
// Returns the state of the memory controller:
|
|
#define DMC_STATUS_CONFIG 0x0
|
|
#define DMC_STATUS_READY 0x1
|
|
#define DMC_STATUS_PAUSED 0x2
|
|
#define DMC_STATUS_LOWPOWER 0x3
|
|
|
|
// Changes the state of the memory controller:
|
|
#define DMC_COMMAND_GO 0x0
|
|
#define DMC_COMMAND_SLEEP 0x1
|
|
#define DMC_COMMAND_WAKEUP 0x2
|
|
#define DMC_COMMAND_PAUSE 0x3
|
|
#define DMC_COMMAND_CONFIGURE 0x4
|
|
#define DMC_COMMAND_ACTIVEPAUSE 0x7
|
|
|
|
// Determines the command required
|
|
#define DMC_DIRECT_CMD_MEMCMD_PRECHARGEALL 0x0
|
|
#define DMC_DIRECT_CMD_MEMCMD_AUTOREFRESH (0x1 << 18)
|
|
#define DMC_DIRECT_CMD_MEMCMD_MODEREG (0x2 << 18)
|
|
#define DMC_DIRECT_CMD_MEMCMD_EXTMODEREG (0x2 << 18)
|
|
#define DMC_DIRECT_CMD_MEMCMD_NOP (0x3 << 18)
|
|
#define DMC_DIRECT_CMD_MEMCMD_DPD (0x1 << 22)
|
|
#define DMC_DIRECT_CMD_BANKADDR(n) ((n & 0x3) << 16)
|
|
#define DMC_DIRECT_CMD_CHIP_ADDR(n) ((n & 0x3) << 20)
|
|
|
|
|
|
//
|
|
// AXI ID configuration register map
|
|
//
|
|
#define DMC_ID_0_CFG_REG 0x100
|
|
#define DMC_ID_1_CFG_REG 0x104
|
|
#define DMC_ID_2_CFG_REG 0x108
|
|
#define DMC_ID_3_CFG_REG 0x10C
|
|
#define DMC_ID_4_CFG_REG 0x110
|
|
#define DMC_ID_5_CFG_REG 0x114
|
|
#define DMC_ID_6_CFG_REG 0x118
|
|
#define DMC_ID_7_CFG_REG 0x11C
|
|
#define DMC_ID_8_CFG_REG 0x120
|
|
#define DMC_ID_9_CFG_REG 0x124
|
|
#define DMC_ID_10_CFG_REG 0x128
|
|
#define DMC_ID_11_CFG_REG 0x12C
|
|
#define DMC_ID_12_CFG_REG 0x130
|
|
#define DMC_ID_13_CFG_REG 0x134
|
|
#define DMC_ID_14_CFG_REG 0x138
|
|
#define DMC_ID_15_CFG_REG 0x13C
|
|
|
|
// Set the QoS
|
|
#define DMC_ID_CFG_QOS_DISABLE 0
|
|
#define DMC_ID_CFG_QOS_ENABLE 1
|
|
#define DMC_ID_CFG_QOS_MIN 2
|
|
|
|
|
|
//
|
|
// Chip configuration register map
|
|
//
|
|
#define DMC_CHIP_0_CFG_REG 0x200
|
|
#define DMC_CHIP_1_CFG_REG 0x204
|
|
#define DMC_CHIP_2_CFG_REG 0x208
|
|
#define DMC_CHIP_3_CFG_REG 0x20C
|
|
|
|
//
|
|
// User Defined Pins
|
|
//
|
|
#define DMC_USER_STATUS_REG 0x300
|
|
#define DMC_USER_0_CFG_REG 0x304
|
|
#define DMC_USER_1_CFG_REG 0x308
|
|
#define DMC_FEATURE_CRTL_REG 0x30C
|
|
#define DMC_USER_2_CFG_REG 0x310
|
|
|
|
|
|
//
|
|
// PHY Register Settings
|
|
//
|
|
#define PHY_PTM_DFI_CLK_RANGE 0xE00 // DDR2 PHY PTM register offset
|
|
#define PHY_PTM_IOTERM 0xE04
|
|
#define PHY_PTM_PLL_EN 0xe0c
|
|
#define PHY_PTM_PLL_RANGE 0xe18
|
|
#define PHY_PTM_FEEBACK_DIV 0xe1c
|
|
#define PHY_PTM_RCLK_DIV 0xe20
|
|
#define PHY_PTM_LOCK_STATUS 0xe28
|
|
#define PHY_PTM_INIT_DONE 0xe34
|
|
#define PHY_PTM_ADDCOM_IOSTR_OFF 0xec8
|
|
#define PHY_PTM_SQU_TRAINING 0xee8
|
|
#define PHY_PTM_SQU_STAT 0xeec
|
|
|
|
// ==============================================================================
|
|
// PIPD 40G DDR2/DDR3 PHY Register definitions
|
|
//
|
|
// Offsets from APB Base Address
|
|
// ==============================================================================
|
|
#define PHY_BYTE0_OFFSET 0x000
|
|
#define PHY_BYTE1_OFFSET 0x200
|
|
#define PHY_BYTE2_OFFSET 0x400
|
|
#define PHY_BYTE3_OFFSET 0x600
|
|
|
|
#define PHY_BYTE0_COARSE_SQADJ_INIT 0x064 ;// Coarse squelch adjust
|
|
#define PHY_BYTE1_COARSE_SQADJ_INIT 0x264 ;// Coarse squelch adjust
|
|
#define PHY_BYTE2_COARSE_SQADJ_INIT 0x464 ;// Coarse squelch adjust
|
|
#define PHY_BYTE3_COARSE_SQADJ_INIT 0x664 ;// Coarse squelch adjust
|
|
|
|
#define PHY_BYTE0_IOSTR_OFFSET 0x004
|
|
#define PHY_BYTE1_IOSTR_OFFSET 0x204
|
|
#define PHY_BYTE2_IOSTR_OFFSET 0x404
|
|
#define PHY_BYTE3_IOSTR_OFFSET 0x604
|
|
|
|
|
|
;//--------------------------------------------------------------------------
|
|
|
|
// DFI Clock ranges:
|
|
|
|
#define PHY_PTM_DFI_CLK_RANGE_200MHz 0x0
|
|
#define PHY_PTM_DFI_CLK_RANGE_201_267MHz 0x1
|
|
#define PHY_PTM_DFI_CLK_RANGE_268_333MHz 0x2
|
|
#define PHY_PTM_DFI_CLK_RANGE_334_400MHz 0x3
|
|
#define PHY_PTM_DFI_CLK_RANGE_401_533MHz 0x4
|
|
#define PHY_PTM_DFI_CLK_RANGE_534_667MHz 0x5
|
|
#define PHY_PTM_DFI_CLK_RANGE_668_800MHz 0x6
|
|
|
|
|
|
|
|
#define PHY_PTM_DFI_CLK_RANGE_VAL PHY_PTM_DFI_CLK_RANGE_334_400MHz
|
|
|
|
//--------------------------------------------------------------------------
|
|
|
|
|
|
// PLL Range
|
|
|
|
#define PHY_PTM_PLL_RANGE_200_400MHz 0x0 // b0 = frequency >= 200 MHz and < 400 MHz
|
|
#define PHY_PTM_PLL_RANGE_400_800MHz 0x1 // b1 = frequency >= 400 MHz.
|
|
#define PHY_PTM_FEEBACK_DIV_200_400MHz 0x0 // b0 = frequency >= 200 MHz and < 400 MHz
|
|
#define PHY_PTM_FEEBACK_DIV_400_800MHz 0x1 // b1 = frequency >= 400 MHz.
|
|
#define PHY_PTM_REFCLK_DIV_200_400MHz 0x0
|
|
#define PHY_PTM_REFCLK_DIV_400_800MHz 0x1
|
|
|
|
#define TC_UIOLHNC_MASK 0x000003C0
|
|
#define TC_UIOLHNC_SHIFT 0x6
|
|
#define TC_UIOLHPC_MASK 0x0000003F
|
|
#define TC_UIOLHPC_SHIFT 0x2
|
|
#define TC_UIOHOCT_MASK 0x2
|
|
#define TC_UIOHOCT_SHIFT 0x1
|
|
#define TC_UIOHSTOP_SHIFT 0x0
|
|
#define TC_UIOLHXC_VALUE 0x4
|
|
|
|
#define PHY_PTM_SQU_TRAINING_ENABLE 0x1
|
|
#define PHY_PTM_SQU_TRAINING_DISABLE 0x0
|
|
|
|
|
|
//--------------------------------------
|
|
// JEDEC DDR2 Device Register definitions and settings
|
|
//--------------------------------------
|
|
#define DDR_MODESET_SHFT 14
|
|
#define DDR_MODESET_MR 0x0 ;// Mode register
|
|
#define DDR_MODESET_EMR 0x1 ;// Extended Mode register
|
|
#define DDR_MODESET_EMR2 0x2
|
|
#define DDR_MODESET_EMR3 0x3
|
|
|
|
//
|
|
// Extended Mode Register settings
|
|
//
|
|
#define DDR_EMR_OCD_MASK 0x0000380
|
|
#define DDR_EMR_OCD_SHIFT 0x7
|
|
#define DDR_EMR_RTT_MASK 0x00000044 // DDR2 Device RTT (ODT) settings
|
|
#define DDR_EMR_RTT_SHIFT 0x2
|
|
#define DDR_EMR_ODS_MASK 0x00000002 // DDR2 Output Drive Strength
|
|
#define DDR_EMR_ODS_SHIFT 0x0001
|
|
|
|
// Termination Values:
|
|
#define DDR_EMR_RTT_50R 0x00000044 // DDR2 50 Ohm termination
|
|
#define DDR_EMR_RTT_75R 0x00000004 // DDR2 75 Ohm termination
|
|
#define DDR_EMR_RTT_150 0x00000040 // DDR2 150 Ohm termination
|
|
|
|
// Output Drive Strength Values:
|
|
#define DDR_EMR_ODS_FULL 0x0 // DDR2 Full Drive Strength
|
|
#define DDR_EMR_ODS_HALF 0x1 // DDR2 Half Drive Strength
|
|
|
|
// OCD values
|
|
#define DDR_EMR_OCD_DEFAULT 0x7
|
|
#define DDR_EMR_OCD_NS 0x0
|
|
|
|
#define DDR_EMR_ODS_VAL DDR_EMR_ODS_FULL
|
|
|
|
#define DDR_SDRAM_START_ADDR 0x10000000
|
|
|
|
|
|
// ----------------------------------------
|
|
// PHY IOTERM values
|
|
// ----------------------------------------
|
|
#define PHY_PTM_IOTERM_OFF 0x0
|
|
#define PHY_PTM_IOTERM_150R 0x1
|
|
#define PHY_PTM_IOTERM_75R 0x2
|
|
#define PHY_PTM_IOTERM_50R 0x3
|
|
|
|
#define PHY_BYTE_IOSTR_60OHM 0x0
|
|
#define PHY_BYTE_IOSTR_40OHM 0x1
|
|
#define PHY_BYTE_IOSTR_30OHM 0x2
|
|
#define PHY_BYTE_IOSTR_30AOHM 0x3
|
|
|
|
#define DDR2_MR_BURST_LENGTH_4 (2)
|
|
#define DDR2_MR_BURST_LENGTH_8 (3)
|
|
#define DDR2_MR_DLL_RESET (1 << 8)
|
|
#define DDR2_MR_CAS_LATENCY_4 (4 << 4)
|
|
#define DDR2_MR_CAS_LATENCY_5 (5 << 4)
|
|
#define DDR2_MR_CAS_LATENCY_6 (6 << 4)
|
|
#define DDR2_MR_WR_CYCLES_2 (1 << 9)
|
|
#define DDR2_MR_WR_CYCLES_3 (2 << 9)
|
|
#define DDR2_MR_WR_CYCLES_4 (3 << 9)
|
|
#define DDR2_MR_WR_CYCLES_5 (4 << 9)
|
|
#define DDR2_MR_WR_CYCLES_6 (5 << 9)
|
|
|
|
|
|
VOID
|
|
PL341DmcInit (
|
|
IN UINTN DmcBase,
|
|
IN PL341_DMC_CONFIG* DmcConfig
|
|
);
|
|
|
|
VOID PL341DmcPhyInit (
|
|
IN UINTN DmcPhyBase
|
|
);
|
|
|
|
VOID PL341DmcTrainPHY (
|
|
IN UINTN DmcPhyBase
|
|
);
|
|
|
|
#endif /* _PL341DMC_H_ */
|