audk/EdkModulePkg/Universal/Network/PxeBc/Dxe/pxe_bc_arp.c

618 lines
15 KiB
C

/*++
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
pxe_bc_arp.c
Abstract:
--*/
#include "bc.h"
//
// Definitions for ARP
// Per RFC 826
//
STATIC ARP_HEADER ArpHeader;
#pragma pack(1)
STATIC struct {
UINT8 MediaHeader[14];
ARP_HEADER ArpHeader;
UINT8 ArpData[64];
} ArpReplyPacket;
#pragma pack()
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
VOID
InitArpHeader (
VOID
)
/*++
Routine description:
Initialize ARP packet header.
Parameters:
none
Returns:
none
--*/
{
ArpHeader.HwType = HTONS (ETHERNET_ADD_SPC);
ArpHeader.ProtType = HTONS (ETHER_TYPE_IP);
ArpHeader.HwAddLen = ENET_HWADDLEN;
ArpHeader.ProtAddLen = IPV4_PROTADDLEN;
ArpHeader.OpCode = HTONS (ARP_REQUEST);
CopyMem (&ArpReplyPacket.ArpHeader, &ArpHeader, sizeof (ARP_HEADER));
}
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
VOID
HandleArpReceive (
IN PXE_BASECODE_DEVICE *Private,
IN ARP_PACKET *ArpPacketPtr,
IN VOID *MediaHeader
)
/*++
Routine description:
Process ARP packet.
Parameters:
Private := Pointer to PxeBc interface
ArpPacketPtr := Pointer to ARP packet
MediaHeader := Pointer to media header.
Returns:
--*/
{
EFI_PXE_BASE_CODE_MODE *PxeBcMode;
EFI_SIMPLE_NETWORK_MODE *SnpMode;
EFI_MAC_ADDRESS TmpMacAddr;
UINTN Index;
UINT8 *SrcHwAddr;
UINT8 *SrcPrAddr;
UINT8 *DstHwAddr;
UINT8 *DstPrAddr;
UINT8 *TmpPtr;
//
//
//
PxeBcMode = Private->EfiBc.Mode;
SnpMode = Private->SimpleNetwork->Mode;
//
// For now only ethernet addresses are supported.
// This will need to be updated when other media
// layers are supported by PxeBc, Snp and UNDI.
//
if (ArpPacketPtr->ArpHeader.HwType != HTONS (ETHERNET_ADD_SPC)) {
return ;
}
//
// For now only IP protocol addresses are supported.
// This will need to be updated when other protocol
// types are supported by PxeBc, Snp and UNDI.
//
if (ArpPacketPtr->ArpHeader.ProtType != HTONS (ETHER_TYPE_IP)) {
return ;
}
//
// For now only SNP hardware address sizes are supported.
//
if (ArpPacketPtr->ArpHeader.HwAddLen != SnpMode->HwAddressSize) {
return ;
}
//
// For now only PxeBc protocol address sizes are supported.
//
if (ArpPacketPtr->ArpHeader.ProtAddLen != Private->IpLength) {
return ;
}
//
// Ignore out of range opcodes
//
switch (ArpPacketPtr->ArpHeader.OpCode) {
case HTONS (ARP_REPLY):
case HTONS (ARP_REQUEST):
break;
default:
return ;
}
//
// update entry in our ARP cache if we have it
//
SrcHwAddr = (UINT8 *) &ArpPacketPtr->SrcHardwareAddr;
SrcPrAddr = SrcHwAddr + SnpMode->HwAddressSize;
for (Index = 0; Index < PxeBcMode->ArpCacheEntries; ++Index) {
if (CompareMem (
&PxeBcMode->ArpCache[Index].IpAddr,
SrcPrAddr,
Private->IpLength
)) {
continue;
}
CopyMem (
&PxeBcMode->ArpCache[Index].MacAddr,
SrcHwAddr,
SnpMode->HwAddressSize
);
break;
}
//
// Done if ARP packet was not for us.
//
DstHwAddr = SrcPrAddr + Private->IpLength;
DstPrAddr = DstHwAddr + SnpMode->HwAddressSize;
if (CompareMem (DstPrAddr, &PxeBcMode->StationIp, Private->IpLength)) {
return ;
//
// not for us
//
}
//
// for us - if we did not update entry, add it
//
if (Index == PxeBcMode->ArpCacheEntries) {
//
// if we have a full table, get rid of oldest
//
if (Index == PXE_ARP_CACHE_SIZE) {
Index = Private->OldestArpEntry;
if (++Private->OldestArpEntry == PXE_ARP_CACHE_SIZE) {
Private->OldestArpEntry = 0;
}
} else {
++PxeBcMode->ArpCacheEntries;
}
CopyMem (
&PxeBcMode->ArpCache[Index].MacAddr,
SrcHwAddr,
SnpMode->HwAddressSize
);
CopyMem (
&PxeBcMode->ArpCache[Index].IpAddr,
SrcPrAddr,
Private->IpLength
);
}
//
// if this is not a request or we don't yet have an IP, finished
//
if (ArpPacketPtr->ArpHeader.OpCode != HTONS (ARP_REQUEST) || !Private->GoodStationIp) {
return ;
}
//
// Assemble ARP reply.
//
//
// Create media header. [ dest mac | src mac | prot ]
//
CopyMem (
&ArpReplyPacket.MediaHeader[0],
SrcHwAddr,
SnpMode->HwAddressSize
);
CopyMem (
&ArpReplyPacket.MediaHeader[SnpMode->HwAddressSize],
&SnpMode->CurrentAddress,
SnpMode->HwAddressSize
);
CopyMem (
&ArpReplyPacket.MediaHeader[2 * SnpMode->HwAddressSize],
&((UINT8 *) MediaHeader)[2 * SnpMode->HwAddressSize],
sizeof (UINT16)
);
//
// ARP reply header is almost filled in,
// just insert the correct opcode.
//
ArpReplyPacket.ArpHeader.OpCode = HTONS (ARP_REPLY);
//
// Now fill in ARP data. [ src mac | src prot | dest mac | dest prot ]
//
TmpPtr = ArpReplyPacket.ArpData;
CopyMem (TmpPtr, &SnpMode->CurrentAddress, SnpMode->HwAddressSize);
TmpPtr += SnpMode->HwAddressSize;
CopyMem (TmpPtr, &PxeBcMode->StationIp, Private->IpLength);
TmpPtr += Private->IpLength;
CopyMem (TmpPtr, SrcHwAddr, SnpMode->HwAddressSize);
TmpPtr += SnpMode->HwAddressSize;
CopyMem (TmpPtr, SrcPrAddr, Private->IpLength);
//
// Now send out the ARP reply.
//
CopyMem (&TmpMacAddr, SrcHwAddr, sizeof (EFI_MAC_ADDRESS));
SendPacket (
Private,
&ArpReplyPacket.MediaHeader,
&ArpReplyPacket.ArpHeader,
sizeof (ARP_HEADER) + 2 * (Private->IpLength + SnpMode->HwAddressSize),
&TmpMacAddr,
PXE_PROTOCOL_ETHERNET_ARP,
EFI_PXE_BASE_CODE_FUNCTION_ARP
);
//
// Give time (100 microseconds) for ARP reply to get onto wire.
//
gBS->Stall (1000);
}
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
BOOLEAN
GetHwAddr (
IN PXE_BASECODE_DEVICE *Private,
IN EFI_IP_ADDRESS *ProtocolAddrPtr,
OUT EFI_MAC_ADDRESS *HardwareAddrPtr
)
/*++
Routine description:
Locate IP address in ARP cache and return MAC address.
Parameters:
Private := Pointer to PxeBc interface
ProtocolAddrPtr := Pointer to IP address
HardwareAddrPtr := Pointer to MAC address storage
Returns:
TRUE := If IP address was found and MAC address was stored
FALSE := If IP address was not found
--*/
{
EFI_PXE_BASE_CODE_MODE *PxeBcMode;
UINTN HardwareAddrLength;
UINTN Index;
PxeBcMode = Private->EfiBc.Mode;
HardwareAddrLength = Private->SimpleNetwork->Mode->HwAddressSize;
for (Index = 0; Index < PxeBcMode->ArpCacheEntries; ++Index) {
if (!CompareMem (
ProtocolAddrPtr,
&PxeBcMode->ArpCache[Index].IpAddr,
Private->IpLength
)) {
CopyMem (
HardwareAddrPtr,
&PxeBcMode->ArpCache[Index].MacAddr,
HardwareAddrLength
);
return TRUE;
}
}
return FALSE;
}
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
STATIC
EFI_STATUS
SendRequest (
IN PXE_BASECODE_DEVICE *Private,
IN EFI_IP_ADDRESS *ProtocolAddrPtr,
IN EFI_MAC_ADDRESS *HardwareAddrPtr
)
/*++
Routine description:
Transmit ARP request packet
Parameters:
Private := Pointer to PxeBc interface
ProtocolAddrPtr := Pointer IP address to find
HardwareAddrPtr := Pointer to MAC address to find
Returns:
EFI_SUCCESS := ARP request sent
other := ARP request could not be sent
--*/
{
EFI_PXE_BASE_CODE_MODE *PxeBcMode;
EFI_SIMPLE_NETWORK_MODE *SnpMode;
ARP_PACKET *ArpPacket;
EFI_STATUS Status;
UINTN HardwareAddrLength;
UINT8 *SrcProtocolAddrPtr;
UINT8 *DestHardwareAddrptr;
UINT8 *DestProtocolAddrPtr;
//
//
//
PxeBcMode = Private->EfiBc.Mode;
SnpMode = Private->SimpleNetwork->Mode;
HardwareAddrLength = SnpMode->HwAddressSize;
//
// Allocate ARP buffer
//
if (Private->ArpBuffer == NULL) {
Status = gBS->AllocatePool (
EfiBootServicesData,
SnpMode->MediaHeaderSize + sizeof (ARP_PACKET),
(VOID **) &Private->ArpBuffer
);
if (EFI_ERROR (Status)) {
return Status;
}
}
ArpPacket = (VOID *) (Private->ArpBuffer + SnpMode->MediaHeaderSize);
//
// for now, only handle one kind of hw and pr address
//
ArpPacket->ArpHeader = ArpHeader;
ArpPacket->ArpHeader.HwAddLen = (UINT8) HardwareAddrLength;
ArpPacket->ArpHeader.ProtAddLen = (UINT8) Private->IpLength;
//
// rest more generic
//
SrcProtocolAddrPtr = (UINT8 *) (&ArpPacket->SrcHardwareAddr) + HardwareAddrLength;
DestHardwareAddrptr = SrcProtocolAddrPtr + Private->IpLength;
DestProtocolAddrPtr = DestHardwareAddrptr + HardwareAddrLength;
CopyMem (DestProtocolAddrPtr, ProtocolAddrPtr, Private->IpLength);
CopyMem (DestHardwareAddrptr, HardwareAddrPtr, HardwareAddrLength);
CopyMem (SrcProtocolAddrPtr, &PxeBcMode->StationIp, Private->IpLength);
CopyMem (
&ArpPacket->SrcHardwareAddr,
&SnpMode->CurrentAddress,
HardwareAddrLength
);
return SendPacket (
Private,
Private->ArpBuffer,
ArpPacket,
sizeof (ARP_HEADER) + ((Private->IpLength + HardwareAddrLength) << 1),
&SnpMode->BroadcastAddress,
PXE_PROTOCOL_ETHERNET_ARP,
EFI_PXE_BASE_CODE_FUNCTION_ARP
);
}
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
//
// check for address - if not there, send ARP request, wait and check again
// not how it would be done in a full system
//
#define ARP_REQUEST_TIMEOUT_MS 500 // try for half a second
////////////////////////////////////////////////////////////
//
// BC Arp Routine
//
EFI_STATUS
EFIAPI
BcArp (
IN EFI_PXE_BASE_CODE_PROTOCOL * This,
IN EFI_IP_ADDRESS * ProtocolAddrPtr,
OUT EFI_MAC_ADDRESS * HardwareAddrPtr OPTIONAL
)
/*++
Routine description:
PxeBc ARP API.
Parameters:
This := Pointer to PxeBc interface
ProtocolAddrPtr := Pointer to IP address to find
HardwareAddrPtr := Pointer to MAC address found.
Returns:
--*/
{
EFI_MAC_ADDRESS Mac;
EFI_STATUS StatCode;
PXE_BASECODE_DEVICE *Private;
//
// Lock the instance data and make sure started
//
StatCode = EFI_SUCCESS;
if (This == NULL) {
DEBUG ((EFI_D_ERROR, "BC *This pointer == NULL"));
return EFI_INVALID_PARAMETER;
}
Private = CR (This, PXE_BASECODE_DEVICE, EfiBc, PXE_BASECODE_DEVICE_SIGNATURE);
if (Private == NULL) {
DEBUG ((EFI_D_ERROR, "PXE_BASECODE_DEVICE poiner == NULL"));
return EFI_INVALID_PARAMETER;
}
EfiAcquireLock (&Private->Lock);
if (This->Mode == NULL || !This->Mode->Started) {
DEBUG ((EFI_D_ERROR, "BC was not started."));
EfiReleaseLock (&Private->Lock);
return EFI_NOT_STARTED;
}
DEBUG ((EFI_D_INFO, "\nBcArp()"));
//
// Issue BC command
//
if (ProtocolAddrPtr == NULL) {
DEBUG (
(EFI_D_INFO,
"\nBcArp() Exit #1 %Xh (%r)",
EFI_INVALID_PARAMETER,
EFI_INVALID_PARAMETER)
);
EfiReleaseLock (&Private->Lock);
return EFI_INVALID_PARAMETER;
}
if (HardwareAddrPtr == NULL) {
HardwareAddrPtr = &Mac;
}
ZeroMem (HardwareAddrPtr, Private->SimpleNetwork->Mode->HwAddressSize);
if (GetHwAddr (Private, ProtocolAddrPtr, HardwareAddrPtr)) {
DEBUG (
(EFI_D_INFO,
"\nBcArp() Exit #2 %Xh (%r)",
EFI_SUCCESS,
EFI_SUCCESS)
);
EfiReleaseLock (&Private->Lock);
return EFI_SUCCESS;
}
StatCode = DoArp (Private, ProtocolAddrPtr, HardwareAddrPtr);
DEBUG ((EFI_D_INFO, "\nBcArp() Exit #3 %Xh (%r)", StatCode, StatCode));
EfiReleaseLock (&Private->Lock);
return StatCode;
}
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
EFI_STATUS
DoArp (
IN PXE_BASECODE_DEVICE *Private,
IN EFI_IP_ADDRESS *ProtocolAddrPtr,
OUT EFI_MAC_ADDRESS *HardwareAddrPtr
)
/*++
Routine description:
Internal ARP implementation.
Parameters:
Private := Pointer to PxeBc interface
ProtocolAddrPtr := Pointer to IP address to find
HardwareAddrPtr := Pointer to MAC address found
Returns:
EFI_SUCCESS := MAC address found
other := MAC address could not be found
--*/
{
EFI_STATUS StatCode;
EFI_EVENT TimeoutEvent;
UINTN HeaderSize;
UINTN BufferSize;
UINT16 Protocol;
DEBUG ((EFI_D_INFO, "\nDoArp()"));
//
//
//
StatCode = SendRequest (Private, ProtocolAddrPtr, HardwareAddrPtr);
if (EFI_ERROR (StatCode)) {
DEBUG ((EFI_D_INFO, "\nDoArp() Exit #1 %Xh (%r)", StatCode, StatCode));
return StatCode;
}
//
//
//
StatCode = gBS->CreateEvent (
EFI_EVENT_TIMER,
EFI_TPL_CALLBACK,
NULL,
NULL,
&TimeoutEvent
);
if (EFI_ERROR (StatCode)) {
return StatCode;
}
StatCode = gBS->SetTimer (
TimeoutEvent,
TimerRelative,
ARP_REQUEST_TIMEOUT_MS * 10000
);
if (EFI_ERROR (StatCode)) {
gBS->CloseEvent (TimeoutEvent);
return StatCode;
}
//
//
//
for (;;) {
StatCode = WaitForReceive (
Private,
EFI_PXE_BASE_CODE_FUNCTION_ARP,
TimeoutEvent,
&HeaderSize,
&BufferSize,
&Protocol
);
if (EFI_ERROR (StatCode)) {
break;
}
if (Protocol != PXE_PROTOCOL_ETHERNET_ARP) {
continue;
}
HandleArpReceive (
Private,
(ARP_PACKET *) (Private->ReceiveBufferPtr + HeaderSize),
Private->ReceiveBufferPtr
);
if (GetHwAddr (Private, ProtocolAddrPtr, HardwareAddrPtr)) {
break;
}
}
DEBUG (
(EFI_D_INFO,
"\nDoArp() Exit #2 %Xh, (%r)",
StatCode,
StatCode)
);
gBS->CloseEvent (TimeoutEvent);
return StatCode;
}
/* eof - pxe_bc_arp.c */